Strange Behaviour from new Universe

I just created a universe with the IDT in 4.0 SP04 based in a table from a single MS SQL 2008 database. but i have strange situation. It seems to crate connection to the database but does not close the connections, creating more and more connectios to the database after a while. Some hours later , the connectios must be manually closes. Any suggestions why ?

Hi Hector,
Did you checked the connection settings you did while creating the connection to SQL Server.
Just check what you have selected:
Select " Disconnected after each transaction" in the attached connection settings, and I believe this should work for you.
Thanks
Gaurav

Similar Messages

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour from PS CS5 Extended working with 3D tools

Hi there.
I've been trying to use the 3D tools in this software to curve labels around a cylinder. After making an adjustment to a setting I often find my image turns transparent and white as per the attachment below (it should be full colour). It doesn't seem to relate to doing any particular task, I always have to hit undo and try and make the change again and hope that it works this time (mostly it doesn't). I got so frustrated with how often this was happening that in the end I just had to give up on Photoshop's 3D capabilities and go back to old methods I used in Illustrator.
Is my computer incapable of dealing with such intense work here or is this some other bug?
I'm using Photoshop CS5 Extended on OS 10.5.8.
Cheers, Darren

Steve,
- card was Intel GMA X4500, driver version 7.15.10.1652, driver date 06-Feb-09.
- unsupported card, I activated GPU support via AllowOldGPUS_ON; tested and then disabled GPU via Preferences, unchecking "Enable openGL drawing", I thought it was enough to disable GPU usage everywhere.
- it most likely is not OS-dependent.
- it's also rather low-priority, a warning in the tech note about GPU support would suffice.

Strange behaviour of a Simple Servlet.Please explain

I am experiencing a strange behaviour from this servlet.
I have written a servlet that expects some data from the client.
So I startup Tomcat and invoke this servlet thru the brower:
http://localhost:8080/A_SYMBIAN_SERVLET/servlet/Recieve_Http_Data.
The Console displays:
Server Ready to receive Message from Symbian Application...
How come the console is not displaying
In Receive_Http_Data [Client] :
at the same time at the console ? How come it is only displaying the first line?
Shudnt the 'In Receive_Http_Data [Client] be displayed if you invoke this servlet
thru the browser?
Can anyone explain this strange behaviour!!!
Attached is my servlet:
public class Recieve_Http_Data extends HttpServlet {
public void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("Server Ready to receive Message from Symbian Application...");
BufferedReader br=null;
/* Data Read by the Servlet*/
String sMess="";
// Receive data.
DataInputStream dis = new DataInputStream(request.getInputStream());
sMess = dis.readUTF();
System.out.println("In Receive_Http_Data [Client] : " + sMess);
Can some one explain this strange behaviouR!!!

Ok,I will write an inputstream as you have mentioned in yr mail.
Now,i will write a servlet with the code you have mentioned.
Now how do I know that the servlet is up and running and ready to
receive data from an application.
OK,This is what is the actual application:
I am supposed to receive some test data from a Mobile device
which has the Symbian O/S.
The application on the mobile device is in C++.
This C++ Application connects to my Servlet and sends in request
parameters.The application specifically specifies the name of my
servlet and the protocol(ie method.Connect(URL,'HTTP1.1!))
I have written this servlet on Tomcat 3.2.4 which will receive
this request and display it on my console and return a response
back to the symbian application.(ie the output stream of the servlet).
So,your code will read the parameters sent in by the Symbian
application.right?
Could you also send in the how the outputstream from the servlet
will be sent to the c++ application.
An urgent reply is much appreiciated.

Strange behaviour with Slideshow placement since upgrade to 3.2 from 3.1

Hello, since I upgrade from 3.1 to 3.2, I have some strange behaviours but in particular with the placement of a slideshow on a new page. It is not displaying in the same position as I have in in Design. It is way off and going up over my menus when I look at it in Safari or Chrome. Does anyone know how to fix this or could it be a bug?

Ben,
When you upgrade, only apex_030200 will be created and that will use the tablespace you specify. It does not have to be the same one used by flows_030100.
Scott

Has any Coldplay fan lost purchased content within iTunes, I have recently noticed my Coldplay Live 2012 purchased on iTunes is gone from my iCloud library and no longer available for purchase ! A bit strange considering there new album just went on sale

Recently I have noticed my iTune purchased concert movies after being put back in the cloud are currently missing.
I have never had purchased content from iTunes vanish from my iCloud library and also not be available for purchase on iTunes.
When I had Apple personnel attempt to push the content back to me, they could not find Coldplay's Live 2012.
Even more strange considering their new album just went on sale and renewed interest must be prompting fans to review their collections.
A beautifully shot concert film is missing, a sad situation to be sure!
Thanks for any iCloud wisdom and other fans noticing the same thing.

Hi kevs place,
If you have issues with missing content in iTunes you may want to follow the steps in this article to try to recover it -
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Thanks for using Apple Support Communities.
Best,
Brett L

LR 1.3.1 strange behaviour: L key adds keywords and removes pictures from collection

After updating to LR 1.3.1 yesterday I found a very strange behaviour that I cannot explain: While in the Library module and looking at a picture from a collection (in loupe mode) I cycle through the different light modes using the L key. Then suddenly (after several hits of the L key) a keyword is added (not always the same keyword) and at the same time an unknown number of pictures is removed from the collection. The keyword is not added to the picture I was currently viewing, but to another one from the same collection. This has not happened before and I have no idea what is going on. I can restore the collection by relaunching an older catalog but of course this does not solve the problem. Can anybody help?
(PC, Win XP prof SP 2, 4 Gig RAM)

It is possible that instead of hitting the l key, or perhaps within the same sequence of hits your are in fact accidentally hitting the k key.
K is the shortcut for "Add shortcut keyword"
Of course you would have had to set that particular keyword at some point and it does not explain the different keywords being assigned.
Unless the alt key was involved somehow and you were rating the images with 1-9 numbers. That would account for different keywords being assigned and would seem arbitrary.
To check: look at one or two of the images that you may have rated using a number key and then look at the keyword set the keyword came from. Press the alt key and a number from 1-9 will appear next to the keyword. If they match then thats the answer.
If you weren't rating the images this way then.....??
Perhaps there is a fault with the keyboard itself rather than the program.
David

Populate List from Database (Very Strange Behaviour)

Dear Fellows,
I have developed a from which has two lists One for Major (say) and Other for Minor (say), thesr minors are based on the value of Major.
Now I have developed this system on Windows XP Professional, Developer/2000 6i and Oracle 8i (release 8.1.7).
Major list is populated from database and it shows all major values now using 'when_list_change' trigger the minor list is populated from the database based on the value of major list. Interestingly enough it is working fine without any problem.
Now I have deployed the software to Windows 2000 Professional/Server (tried on both), Developer/2000 6i and Oracle 8.0.5, but strangly the lists are not working now. First list (major) is still working but the other dependent lists are not working.
Another strange thing is that it populate the second list for one particular value (only at times).
The logic is that I have used a program unit to which i am passing 'list element' and 'query' and call it for each list in the when-list-change trigge.
Now its a very strange behaviour, I don't know what to do?
Your cooperation will be highly appreciated.
regards.

rolrollerx wrote:
Hi,
I have Nokia N8 (a great phone, btw) with Symbian Anna. I wanted to download the maps. But the PC Ovi Suite is just busy forever, without downloading anything (I used Performance Monitor to find out it was doing nothing for hours).
As I have unlimited data plan from my phone, I decided to try updating directly from the phone instead. It successfully downloaded the list of maps, but when I selected one of them
"No Wi-Fi network available. Please configure a WiFi access point in the phone Internet destination settings."
Why should I do that? I have a working connection on that phone (as evidenced by the successful download of the list of maps). So now, I am stuck. How can I download the maps?
Well, the suggestion is there. Use a router.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I use icloud email but (2 email accounts univ and icloud) and i need to have all my outgoing emails come "from" my university account, not my icloud. So how do i do that, note checking the default box for sending new messages only applies to new messages

I am using icloud email but i also have a university account. All my email is fowarded to my icloud account and what i need to do is make sure all of my email that i ship is from my university account and not from my icloud account. I know there is a box that allows the default for all new emails to originate from one account but how do i make sure that all my replies to email (i.e. they have been fowarded from university account to icloud) now go from my university account. please help anyone.

Sorry for the delayed response, yes i want to use my university account when replying to all emails. Note i just discovered something, when i forward my university email to my icloud account and than responded from either my imac of my macbook air (i.e. in icloud) it automatically goes to my university account in the "from" space (good news!!!). That is just what i wanted, . While that is the good news, the bad news is that my iphone and ipad still treat this email as being from icloud even though it is forwarded (redirected) from my university account. That is when i respond to an email (or for that matter create a new email in my icloud account) it automatically lists the icloud account as the "from" account and i have to go in and manually modify it. So i am 50% there to solving my problem (i.e. actually did nothing the systems just worked well) but i still need to figure out a way to make this happen on my ipad and iphone. Any help or suggestions, note the default button in the iphone and ipad for email work differently than the default in the composition menu of the imac or macair.

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
 String result = "";
 try {
 // Execute a command
 Process child = Runtime.getRuntime().exec(command);
 // Read from an input stream
 InputStream in = child.getInputStream();
 int c;
 while ((c = in.read()) != -1) {
 result += ((char) c);
 in.close();
 in = child.getErrorStream();
 while ((c = in.read()) != -1) {
 result += ((char) c);
 in.close();
 } catch (IOException e) {
 return result;
 }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
 String line;
 String result = "";
 OutputStream stdin = null;
 InputStream stderr = null;
 InputStream stdout = null;
 // launch EXE and grab stdin/stdout and stderr
 try {
 Process process;
 process = Runtime.getRuntime().exec("cmd.exe");
 stdin = process.getOutputStream();
 stderr = process.getErrorStream();
 stdout = process.getInputStream();
 // "write" the parms into stdin
 for (int i = 0; i < commands.length; i++) {
 line = commands[i] + "\n";
 stdin.write(line.getBytes());
 stdin.flush();
 stdin.close();
 // clean up if any output in stdout
 BufferedReader brCleanUp = new BufferedReader(
 new InputStreamReader(stdout));
 while ((line = brCleanUp.readLine()) != null) {
 result += line + "\n";
 brCleanUp.close();
 // clean up if any output in stderr
 brCleanUp = new BufferedReader(new InputStreamReader(stderr));
 while ((line = brCleanUp.readLine()) != null) {
 result += "ERR: " + line + "\n";
 brCleanUp.close();
 } catch (IOException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
 return result;
 }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Strange behaviour in Mail

I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
Have to quit Mail - sometimes forcibly, and restart it.
Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
Had to upgrade machine to allow upgrade to Mountain Lion. Not sure which is responsible - new MB PRo , or 10.8?!
Do I really have to re-install OSX just to reinstall Mail?
Any other pointers/hints very welcome.
Thanks

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Strange behaviour - any ideas?

Strange behaviour began when i was unable to open a new page in photoshop.
The next day i was unable to print from word or photoshop or emails.
However i could print from freehand and excel!
I used disk 1 to verify and repair disk.
this did not solve the problem as then when i tried to open Safari the toolbar opened but no window.
I have reinstalled the operating system making an archive but this also has not had an effect.
Any ideas on what to do next or should I just reinstall the operating system over the old one?
many thanks 4 any help

Sarah, to help the knowlegable users here please advise which model G5 iMac you have & include this info in your system info preference by clicking on the "My Settings" link in the right hand column.-->
This way, you won't have to keep repeating yourself and the knowlegable users will be able to provide you with the correct trouble shooting information/solutions if the problem is your computer.
Also, it will be helpful if you will advise which version of Word, Photoshop you have, which email program & the type of printer you are using.
Thank you.

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

Strange Behaviour in File class

Hi,
I noticed a strange behaviour. There is a file contains unicode letters in its name. I tried
File file=new File("c:\@ℏℑ\@�⅙0.txt");
file.exists() // I checked existence of file using this statement which returns false although file is exist.
What can I do ?
Thanks

Hi,
Thanks for the reply.
I am showing the sample:
//This is a list method
static void list(File file) {
 if (file.isDirectory()) {
 File[] files = file.listFiles();
 if (files != null) {
 for (int i = 0; i < files.length; i++) {
 if(files.isDirectory()){
list(files[i]);
}else{
System.out.println(files[i].getAbsolutePath() + " " + files[i].exists());
System.out.println(file.getAbsolutePath() + " " + file.exists());
if I call this method like this from main method:
File file=new File("C:\\Documents and Settings\\Neha\\Desktop\\ttt\\@ℏℑ\\@�⅙0.txt");
list(file);
output:
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt false [with Jre5]
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt true [with Jre6]
if I call like this
File file=new File("C:\\Documents and Settings\\Neha\\Desktop\\ttt");
list(file);
Output:
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt true
C:\Documents and Settings\Neha\Desktop\ttt\@??\Chambal25.txt true
C:\Documents and Settings\Neha\Desktop\ttt\@?? true
C:\Documents and Settings\Neha\Desktop\ttt true

Strange Behaviour from new Universe

Similar Messages

Maybe you are looking for