Strange behaviour in the text resources on the km

Hi, we have got a strange problem here..
when we try to retrieve the content of a text resource from the km by code, we often get the content, but with this 3 characters at the beginning: "ï»¿"
Does anybody knows why?
thanks to everybody...

http://en.wikipedia.org/wiki/Byte_Order_Mark

Similar Messages

Strange behaviour when placing text frame on top of image

Hi,
Win XP, FM 8.04
I have a front cover that consists of a TIF image that bleeds off the page. On top of that image I want to put a text frame with the book title.
The strange thing is that when I create the text frame and use the toolbar buttons to nudge it down on the page, the text (but not the frame) suddenly jumps to a totally different place way down on the page, despite only nudging it, say, 10 mm.
Any ideas why this is happening?
/Mats

Hi,
Partly solved:
After some tests, it seems FM does not like when you try to move a text frame over a transparent area in an image. The image in question was made by importing a PDF into Photoshop, then saving as TIF. Since the PDF contained an area that was had full transparency in InDesign (i.e. "Paper"), that area was also in the TIF image.
The strange behaviour starts exactly at the border where the transparency starts. In non-transparent areas, there is no problem.
Seems like a bug.
/Mats

How to find out all the text elements in the report using Java?

How to trace the contents of an rpt file?
I am able to open the rpt file in my report viewer but can not trace it using the JAVA code.
Actually, I need to find out all the text elements of rpt (Report) file and replace them with the contents of resource bundle.
My Java code to open a report is given below:
import com.crystaldecisions.reports.sdk.ISubreportClientDocument;
import com.crystaldecisions.reports.sdk.ParameterFieldController;
import com.crystaldecisions.reports.sdk.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfos;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ParameterField;
import com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue;
import com.crystaldecisions.sdk.occa.report.data.Values;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public String viewRpt()
               //1.) Setting Database Infos
                        IConnectionInfo iConnectionInfoObj=setDatabaseConnectionInfos();
               //2.) Setting Report Path
               String reportPath=u201DE:
was60
rptFilesLocation
u201D;
               reportPath=(reportPath!=null)?                                             reportPath:AppConstants.CONSTANTS.BLANK;
               String reportName="report1.rpt";
               String reportFullPath = reportPath +   rptName;
             //3.) Setting Report Source
                         ReportClientDocument reportClientDoc = new ReportClientDocument();
                                          reportClientDoc.open(reportPath, 0);
              IReportSource reportSource = reportClientDoc.getReportSource();
              setReportSource(reportSource);
              reportClientDoc.close();
          //4.) Setting the Fields Starts
          setFieldsCrystal(null);
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter1");
          pfieldDV1.setValue(u201Cvalue1u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          pfield1 = new ParameterField();
          vals1 = new Values();
          pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter2");
          pfieldDV1.setValue(u201Cvalue2u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          setFieldsCrystal(fields);
          //Setting the Fields Ends
The sample jsp code to view the report is as follows:
<%@taglib uri="http://www.businessobjects.com/jsf/crystalreportsviewers"
     prefix="bocrv"%>
<bocrv:reportPageViewer viewerName="CrystalViewer"
                                             reportSource="#{CrystalReportBeanObject.reportSource}"
                                             displayToolbarRefreshButton="false"
                                             allowDatabaseLogonPrompting="false"
                                             allowParameterPrompting="false"
                                             databaseLogonInfos="#{CrystalReportBeanObject.connectionInfosCrystal}"
                                             parameterFields="#{CrystalReportBeanObject.fieldsCrystal}"
                                             displayGroupTree="false" displayToolbarLogo="false"
                                             displayToolbarToggleTreeButton="false"
                                             enablePageToGrow="false" height="540"
                                             zoomPercentage="100" width="750"
                                             allowDrillDown="false"
                                             displayToolbarPrintButton="true"
                                             printMode="PDF"
                                             ></bocrv:reportPageViewer>
Edited by: JayKumarSharma on Mar 23, 2011 12:42 PM

This is how you retrieve all the text fields in the reort:
ReportObjects reportObjects = (ITextObject) oReportClientDocument.getReportDefController().getReportObjectController().getReportObjectsByKind(ReportObjectKind.text);
for(int i=0; i< reportObjects.size();i++)
ITextObject textObject = (ITextObject)reportObjects.get(i);
// use ReportObjectController to modify the text object.
If you want to modify the contents of the text element, you can do it as follows:
TextObject oTextObject = new TextObject();
Paragraphs oParagraphs = new Paragraphs();
Paragraph oParagraph = new Paragraph();
ParagraphElements oParagraphElements = new ParagraphElements();
ParagraphTextElement oParagraphTextElement = new ParagraphTextElement();
oParagraphTextElement.setText("This is the new text field");
oParagraphTextElement.setKind(ParagraphElementKind.text);
oReportClientDocument.getReportDefController().getReportObjectController().modify(textObject, oTextObject);
oReportClientDocument.save();

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers!

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Doesn't do that for me. Try resetting the phone

Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. Word was much easier for me

Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. I found word much easier to use. Please help. Trying to do a resume.

On a US keyboard it is Option + 8 (above the letters). •

How to translate the text dynamically in the program?

Hi All,
I have a requirement where I need to translate the text dynamically in the program based on the Language Key retrieved.
Let's say that the Login language is 'EN' and in the logic has retrieved the language 'IT'(based on some conditions). I have to transate the text(which is maintained using the text elements) to ITALIAN(IT) Language and send the same as an email.
Could you please tell me if any Function Module is available in SAP which translates the text Dynamically in the program. or is there any other way to translate the text dynamically in the program.
Could you please share your valuable inputs? Thank you in advance.
Thanks & regards,
Paddu.

you could use SET LOCALE LANGUAGE myLanguage - so you can switch to the desired language and all texts will selected from that language.

Field Length of the text field on the screen

Hello Experts,,
I have field with its label on the screen. Now the label text is picked up from data dictionary as defined.
Data element       J_3ARQDA                       Active
Short Description: Requested delivery date
Length           Field   Label
Short             10       RqDlv.date
Medium         16       Req.deliv.date
Long              20      Requested deliv.date
Heading         5        Dldat
Now the text in different laguage say russian is quite bigger in length as compared to english ones. Now on the sales order screen i have the text 'Dldat', but the russian user needs a bigger word than just 'Dldat'.
Approach : I changed the heading length to some '25' from '5' to accomedate the russian text in DDIC for data element. But if i have to adjust the same on the screen with new text length i have to extend the screen border as well.
Is this right approach ? If not how do we actually accomedate the other language texts on the screen with out altering the screen borders ( length and breadth).

Hi Radhika,
I tried doing that with a couple of invoices but I dont see the Long text printed on the check after the automatic payment run. Can you please suggest me if I am missing on anything. I inserted a long text and a '*" before this to have it printed on the check which does not seem to work. Can you please suggest me alternative solution.
   Thanks in advance.
Ramya

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to make Firefox (Mac) not go back a page upon pressing the Cmd+Left-Combination which should set the text cursor to the beginning of a line in input fields instead of leaving the page?

On a Mac, Cmd+Left places the text cursor to the beginning of the line, Cmd+Right to the end of the line.
FireFox however goes back resp. forward a page in hinstory, which is ''most annoying'', since it very often causes me to accidentally leave a still unsubmitted form and loose all input!
I did not find any possibility to get rid of these dreadful keybindings.

Thanks for your response.
I guess I didn't revert to as far back as the change I had made because when I follow your instructions, no entries are bold.
Or did you perhaps mean the next time the problem occurs I should look for a bold entry? And then change it back to what it was? (All that I recall from a year ago was that I changed one entry from ''true'' to ''false'', or vice versa.)

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike

Strange behaviour in the text resources on the km

Similar Messages

Maybe you are looking for