Strange behaviour network?

I don't know if I have to be concerned about this, but here it goes:
My pb language is Dutch.....and you know when you open the Macintosh HD icon on your dock.....you see this menu on your left in finder.....
This menu should contain:
-Network
-Macintosh HD
-Dock
-(your account)
-Applications
-Movies
-Music
etc etc right?
Now as I mentioned earlier.....my language is set to Dutch so all these menu items above are in dutch.
Network is shown as "Netwerk" (that's the dutch translation).
Very often when I turn on my Pb....."Netwerk" is shown in english ("Network")........and other times it is shown in dutch again. It keeps alternating between Eng-Dutch all the time and I wonder if this is right?
Also.....there is this "unmount" icon next to it.....and sometimes there is not.
Why is it changing all the time? Is it normal? As I'm typing at the moment.....it's showing as "Network' without the unmount thingy.
All the other items are always shown in dutch.....it's just the Network-icon.
Cheers

I can't help you with the Dutch - English thing, but I can reassure you that the probably with the "unmount" icon is perfectly normal. For me it switches between on and off all the time.
Right now it doesn't have it, but this morning it did. Sometimes the "unmount" icon will be there even when I go to my relatives in Pennsylvania....and they don't even have internet...so there couldn't possibly be a Network!
Don't worry about that. If it really annoys you and you don't even use the Network you can simply drag it out of the sidebar and it will go poof.

Similar Messages

Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?

Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour of Adobe Forms

Hi Experts,
I am using webdynpro Java with AIF on NW2004s SP9, Adobe Reader 7.0.9 with NWDS 7.0.09.
AIF is working fine when I access using Local area network and I am facing strange behaviour of AIF using dial-up access. I am not able to retrieve the parameters of Adobe forms when I access using dial-up connecting through VPN to portal server. whatever values I entered in Adobe UI fields where not showing up in webdynpro application. Same application is working fine with LAN and able to retrieve all parameter values of Adobe UI elements.
Dial-up is connecting at 50kbps speed and Adobe forms size is around 300kb.
Grab your points with correct answers.
Regards,
Madhan

hi,
you should have administration authorization on local PC ( IE activeX should be enabled.)
check below sap note
834573 -
766191
Regards
Shridhar Gowda

[SOLVED] French Canadian keyboard strange behaviour

Hello!
I just upgraded to Gnome 2.30 in [testing] and my keyboard has a strange behaviour. With Gnome 2.28, my keyboard layout was set to Canadian French (legacy), and still is, though some of the keys do not behave the same. For instance, the accents "`", "¸" and ^ do not behave as usual, but rather give me some letter with that accent on it, rather than letting me choose the letter on which put the accent.
Moreover, the SHIFT+3 combination gives me a # instead of a /, but not in all software. Google Chrome has the good behaviour, but gnome-terminal gives me a #.
Do you understand any of this?
I'll post the packages I have upgraded.
[2010-04-05 01:09] upgraded openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:09] upgraded python (2.6.5-2 -> 2.6.5-3)
[2010-04-05 01:09] upgraded pygobject (2.20.0-1 -> 2.21.1-1)
[2010-04-05 01:09] upgraded pygtk (2.16.0-2 -> 2.17.0-1)
[2010-04-05 01:09] upgraded gnome-menus (2.28.0.1-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libsoup (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libldap (2.4.21-1 -> 2.4.21-2)
[2010-04-05 01:09] upgraded libidl2 (0.8.13-1 -> 0.8.14-1)
[2010-04-05 01:09] upgraded orbit2 (2.14.17-1 -> 2.14.18-1)
[2010-04-05 01:09] upgraded gconf (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:09] upgraded gnome-keyring (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:09] upgraded libsoup-gnome (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded gnome-icon-theme (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libgweather (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded evolution-data-server (2.28.3.1-1 -> 2.30.0-2)
[2010-04-05 01:10] upgraded gnome-desktop (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libwnck (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libunique (1.1.6-1 -> 1.1.6-2)
[2010-04-05 01:10] upgraded gnome-disk-utility (2.28.1-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libarchive (2.8.3-1 -> 2.8.3-3)
[2010-04-05 01:11] upgraded smbclient (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:11] upgraded gvfs (1.4.3-1 -> 1.6.0-1)
[2010-04-05 01:11] upgraded gnome-vfs (2.24.2-2 -> 2.24.3-2)
[2010-04-05 01:11] upgraded libbonobo (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded libgnome (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libart-lgpl (2.3.20-1 -> 2.3.21-1)
[2010-04-05 01:11] upgraded libgnomecanvas (2.26.0-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libbonoboui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded librsvg (2.26.0-2 -> 2.26.2-1)
[2010-04-05 01:11] upgraded gnome-panel (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libgnomeui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded gnome-python (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:11] upgraded alacarte (0.12.4-2 -> 0.13.1-1)
[2010-04-05 01:11] upgraded apache (2.2.15-1 -> 2.2.15-2)
[2010-04-05 01:11] upgraded at-spi (1.28.1-1 -> 1.30.0-1)
[2010-04-05 01:11] upgraded totem-plparser (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded brasero (2.28.3-2 -> 2.30.0-1)
[2010-04-05 01:12] upgraded icu (4.2.1-1 -> 4.4-1)
[2010-04-05 01:12] upgraded brltty (4.1-2 -> 4.1-3)
[2010-04-05 01:12] upgraded libgtop (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:12] upgraded bug-buddy (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded cheese (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded clutter (1.0.10-1 -> 1.2.4-1)
[2010-04-05 01:12] upgraded clutter-gtk (0.10.2-1 -> 0.10.2-2)
[2010-04-05 01:12] upgraded libxklavier (4.0-1 -> 5.0-1)
[2010-04-05 01:12] upgraded libgnomekbd (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded gnome-settings-daemon (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded zenity (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded metacity (2.28.1-1 -> 2.30.0-2)
[2010-04-05 01:13] upgraded gnome-control-center (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded compiz-decorator-gtk (0.8.4-2 -> 0.8.4-3)
[2010-04-05 01:13] upgraded libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded openslp (1.2.1-2 -> 1.2.1-3)
[2010-04-05 01:13] upgraded cups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded curl (7.20.0-1 -> 7.20.0-2)
[2010-04-05 01:13] upgraded cvs (1.11.23-4 -> 1.11.23-5)
[2010-04-05 01:13] upgraded postgresql-libs (8.4.3-1 -> 8.4.3-2)
[2010-04-05 01:13] upgraded cyrus-sasl-plugins (2.1.23-1 -> 2.1.23-2)
[2010-04-05 01:13] upgraded cyrus-sasl (2.1.23-3 -> 2.1.23-4)
[2010-04-05 01:13] upgraded dbus-python (0.83.0-2.1 -> 0.83.1-1)
[2010-04-05 01:13] upgraded gnome-python-desktop (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded deskbar-applet (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded dnsutils (9.6.1-2 -> 9.6.1-3)
[2010-04-05 01:14] upgraded eog (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded libwebkit (1.1.15.4-3 -> 1.1.90-2)
[2010-04-05 01:14] upgraded gobject-introspection (0.6.6-1 -> 0.6.9-1)
[2010-04-05 01:14] upgraded epiphany (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded evince (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:14] upgraded gtkhtml (3.28.3-1 -> 3.30.0-1)
[2010-04-05 01:14] upgraded evolution-exchange (2.28.3-1 -> 2.30.0-2)
[2010-04-05 01:14] upgraded evolution-webcal (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:14] upgraded file-roller (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gcalctool (5.28.2-1 -> 5.30.0-1)
[2010-04-05 01:15] upgraded gconf-editor (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gnome-session (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gdm (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gtksourceview2 (2.8.2-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded pygtksourceview2 (2.8.0-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded gedit (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded git (1.7.0.3-1 -> 1.7.0.4-1)
[2010-04-05 01:15] upgraded libsigc++2.0 (2.2.4.2-1 -> 2.2.5-1)
[2010-04-05 01:15] upgraded glibmm (2.22.1-1 -> 2.24.0-1)
[2010-04-05 01:15] upgraded gucharmap (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-applets (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-backgrounds (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-bluetooth (2.28.6-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded vte (0.22.5-1 -> 0.24.0-2)
[2010-04-05 01:16] upgraded gnome-desktop-sharp (2.26.0-3 -> 2.26.0-5)
[2010-04-05 01:16] upgraded gnome-doc-utils (0.18.1-1 -> 0.20.0-1)
[2010-04-05 01:17] upgraded gnome-games (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-games-extra-data (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-mag (0.15.9-1 -> 0.16.1-1)
[2010-04-05 01:17] upgraded gnome-media (2.28.5-1 -> 2.30.0-2)
[2010-04-05 01:17] upgraded gnome-netstatus (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:17] upgraded gnome-nettool (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-power-manager (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-screensaver (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gtkmm (2.18.2-1 -> 2.20.0-1)
[2010-04-05 01:17] upgraded gnome-system-monitor (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:18] upgraded system-tools-backends (2.8.3-1 -> 2.10.0-1)
[2010-04-05 01:18] upgraded liboobs (2.22.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded nautilus (2.28.4-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-system-tools (2.28.2-1 -> 2.30.0-2)
[2010-04-05 01:18] upgraded gnome-terminal (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gtk-engines (2.18.5-1 -> 2.20.0-1)
[2010-04-05 01:18] upgraded gnome-themes (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-user-share (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-utils (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded xulrunner (1.9.2.2-2 -> 1.9.2.3-1)
[2010-04-05 01:19] upgraded yelp (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gnome2-user-docs (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gok (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded grep (2.6.2-1 -> 2.6.3-1)
[2010-04-05 01:19] upgraded gstreamer0.10-bad (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded neon (0.28.6-2 -> 0.28.6-4)
[2010-04-05 01:19] upgraded gstreamer0.10-bad-plugins (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded hamster-applet (2.28.2-1 -> 2.30.0.1-1)
[2010-04-05 01:19] upgraded net-snmp (5.5-2 -> 5.5-3)
[2010-04-05 01:19] upgraded hplip (3.9.12-5 -> 3.10.2-1)
[2010-04-05 01:20] upgraded imap (2007e-1 -> 2007e-2)
[2010-04-05 01:20] upgraded jre (6u18-2 -> 6u19-2)
[2010-04-05 01:21] upgraded kdebase-workspace (4.4.2-1 -> 4.4.2-2)
[2010-04-05 01:21] upgraded kernel26-firmware (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26 (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26-headers (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded lib32-glib2 (2.22.5-1 -> 2.24.0-1)
[2010-04-05 01:24] upgraded lib32-atk (1.28.0-1 -> 1.30.0-1)
[2010-04-05 01:24] upgraded lib32-e2fsprogs (1.41.10-1 -> 1.41.11-1)
[2010-04-05 01:24] upgraded lib32-openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:24] upgraded lib32-heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:24] upgraded lib32-libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:24] upgraded lib32-pango (1.26.2-1 -> 1.28.0-1)
[2010-04-05 01:24] upgraded lib32-gtk2 (2.18.9-2 -> 2.20.0-2)
[2010-04-05 01:24] upgraded lib32-libgl (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-libxml2 (2.7.6-2 -> 2.7.7-1)
[2010-04-05 01:24] upgraded lib32-mesa (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:24] upgraded libepc (0.3.10-1 -> 0.3.11-1)
[2010-04-05 01:24] upgraded libfetch (2.30-1 -> 2.30-3)
[2010-04-05 01:24] upgraded libgail-gnome (1.20.1-1 -> 1.20.2-1)
[2010-04-05 01:24] upgraded libgdata (0.4.0-1 -> 0.6.4-1)
[2010-04-05 01:24] upgraded libgnomecups (0.2.3-6 -> 0.2.3-7)
[2010-04-05 01:24] upgraded libgnomeprint (2.18.6-2 -> 2.18.7-2)
[2010-04-05 01:24] upgraded libgnomeprintui (2.18.4-1 -> 2.18.5-1)
[2010-04-05 01:24] upgraded librpcsecgss (0.19-2 -> 0.19-3)
[2010-04-05 01:24] upgraded libssh (0.4.1-1 -> 0.4.1-3)
[2010-04-05 01:25] upgraded libxml++ (2.26.0-1 -> 2.30.0-1)
[2010-04-05 01:25] upgraded links (2.2-3 -> 2.2-4)
[2010-04-05 01:25] upgraded lynx (2.8.7-1 -> 2.8.7-2)
[2010-04-05 01:25] upgraded sbcl (1.0.35-1 -> 1.0.37-1)
[2010-04-05 01:25] upgraded maxima (5.20.1-2 -> 5.20.1-3)
[2010-04-05 01:25] upgraded mercurial (1.5-1 -> 1.5.1-1)
[2010-04-05 01:26] upgraded miro (2.5.4-4 -> 3.0-1)
[2010-04-05 01:26] upgraded mousetweaks (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nasm (2.07-1 -> 2.08.01-1)
[2010-04-05 01:26] upgraded nautilus-actions (1.12.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nautilus-open-terminal (0.18-1 -> 0.18-2)
[2010-04-05 01:26] upgraded nautilus-sendto (2.28.2-1 -> 2.28.4-1)
[2010-04-05 01:26] upgraded samba (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:26] upgraded nautilus-share (0.7.2-4 -> 0.7.2-5)
[2010-04-05 01:26] upgraded network-manager-applet (0.8-2 -> 0.8-3)
[2010-04-05 01:26] upgraded nfs-utils (1.2.2-1 -> 1.2.2-2)
[2010-04-05 01:26] upgraded nmap (5.21-1 -> 5.21-2)
[2010-04-05 01:26] upgraded ptlib (2.6.5-1 -> 2.6.5-2)
[2010-04-05 01:27] upgraded opal (3.6.6-1 -> 3.6.6-2)
[2010-04-05 01:27] upgraded openntpd (3.9p1-10 -> 3.9p1-11)
[2010-04-05 01:28] upgraded openoffice-base (3.2.0-1 -> 3.2.0-3)
[2010-04-05 01:28] upgraded openssh (5.4p1-3 -> 5.4p1-4)
[2010-04-05 01:28] upgraded openvpn (2.1.1-1 -> 2.1.1-2)
[2010-04-05 01:28] upgraded orca (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:28] upgraded perl-crypt-ssleay (0.57-3 -> 0.57-4)
[2010-04-05 01:28] upgraded perl-uri (1.52-1 -> 1.54-1)
[2010-04-05 01:28] upgraded php (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded php-apache (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded pixman (0.16.6-1 -> 0.18.0-1)
[2010-04-05 01:28] upgraded postfix (2.7.0-1 -> 2.7.0-2)
[2010-04-05 01:28] upgraded qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:28] upgraded qtscriptgenerator (0.1.0-3 -> 0.1.0-4)
[2010-04-05 01:29] upgraded rhythmbox (0.12.7-1 -> 0.12.8-1)
[2010-04-05 01:29] upgraded ruby (1.9.1_p378-1 -> 1.9.1_p378-2)
[2010-04-05 01:29] upgraded seahorse (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded seahorse-plugins (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded sound-juicer (2.28.1-2 -> 2.28.2-1)
[2010-04-05 01:29] upgraded subversion (1.6.9-2 -> 1.6.9-4)
[2010-04-05 01:29] upgraded syslog-ng (3.0.4-3 -> 3.0.4-4)
[2010-04-05 01:29] upgraded telepathy-glib (0.10.1-1 -> 0.10.2-1)
[2010-04-05 01:29] upgraded tomboy (1.1.0-1 -> 1.2.0-2)
[2010-04-05 01:29] upgraded totem (2.28.5-2 -> 2.30.0-1)
[2010-04-05 01:29] upgraded transmission-gtk (1.92-1 -> 1.92-2)
[2010-04-05 01:30] upgraded vala (0.7.10-1 -> 0.8.0-1)
[2010-04-05 01:30] upgraded vinagre (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:30] upgraded vino (2.28.1-3 -> 2.28.2-1)
[2010-04-05 01:30] upgraded virtuoso (6.1.0-1 -> 6.1.0-2)
[2010-04-05 01:30] upgraded wget (1.12-1 -> 1.12-2)
[2010-04-05 01:30] upgraded wpa_supplicant (0.6.10-1 -> 0.6.10-2)
[2010-04-05 01:30] upgraded xorg-server (1.7.6-2 -> 1.7.6-3)
[2010-04-05 01:30] upgraded xorg-xinit (1.2.0-1 -> 1.2.1-1)
[2010-04-05 01:30] upgraded xterm (255-1 -> 256-1)
[2010-04-05 09:21] upgraded fofix-svn (1991-1 -> 2038-1)
[2010-04-05 12:31] upgraded gloobus-preview-bzr (212-1 -> 214-1)
Last edited by valandil (2010-04-06 16:52:28)

Problem solved!
I remembered I once configured my keyboard with HAL and /etc/hal/fdi/policy/10-keymap.fdi was set to xkb.layout=ca and xkd.variant=fr. I changed the GDM layout to Canada and removed the xkb.variant=fr from the .fdi file and everything was fixed!

TCD - Peripheral Call Type 9 & 10 Strange Behaviour

Hi all,
I'm trying to get to the bottom of what causes ICM/UCCE to label a TCD record with Peripheral Call Type 9 or 10.
9 = Out
10 = Agent Inside
These values are used to populate the interval tables with ExternalOut and InternalOut
I'm seeing strange behaviour in that external calls are being classified PCT 10. Its worse on 1 pg pair and cucm cluster than the other (both pims agent ext length is 4 if this has any bearing).
From Europe PG and CUCM, most ExtOut calls are correctly classified as 9 (about 95%), but there are some 10:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 15:10:08
9
00415824xxxxx
10
4
18/02/2013 15:10:34
10
00415824xxxxx
10
4
But for Asia PG and CUCM, most ExtOut calls are classified as 10 (about 98%), but again there are some with the correct 9:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 11:54:14
10
0080346xxxxx
14
1
18/02/2013 12:09:59
9
0080302xxxxx
14
1
For info I also see external calls with dispostion 10 and 4 in Asia as Agent Inside so it doesn't seem to tie up with that.
Any thoughts on what could be the cause, I'm kind of thinking along the lines of CUCM on net/off net or soemthing like that?
Thanks
Neil

Attached the full length TCD record.
Also found a pdf document id 67988 External Calls Appear as Internal in IPCC Statistics which says:
CauseThis problem occurs due to a change in Cisco JTAPI version. In earlier versions of Cisco JTAPI, when a
caller calls an address outside the cluster, Cisco CallManager delivers the CallCtlConnNetworkReachedEv
and CallCtlConnNetworkAlertingEv events for the far−end address.
Cisco CallManager version 4.0 and later do not deliver these events. In these versions, the CallCtlConnection
for the far−end address goes to the ESTABLISHED state from the OFFERED state. The application receives
the CallCtlConnOfferedEv and CallCtlConnEstablishedEv events for the far−end address. The application
does not receive the CallCtlConnNetworkReachedEv and CallCtlConnNetworkAlertingEv events.
In order to receive the network events, you must turn on the "Allow overlap sending" flag on the route pattern
configured for the gateway. A new jtapi.ini parameter called "AllowNetworkEventsAfterOffered" is
introduced to allow the application to control the delivery of these events. Applications that need the network
events but cannot turn on this flag can use this new ini parameter to receive network events for outgoing calls.
They are having a PG/CUCM upgrade in a few weeks so its quite possible this may sort it.

Populate List from Database (Very Strange Behaviour)

Dear Fellows,
I have developed a from which has two lists One for Major (say) and Other for Minor (say), thesr minors are based on the value of Major.
Now I have developed this system on Windows XP Professional, Developer/2000 6i and Oracle 8i (release 8.1.7).
Major list is populated from database and it shows all major values now using 'when_list_change' trigger the minor list is populated from the database based on the value of major list. Interestingly enough it is working fine without any problem.
Now I have deployed the software to Windows 2000 Professional/Server (tried on both), Developer/2000 6i and Oracle 8.0.5, but strangly the lists are not working now. First list (major) is still working but the other dependent lists are not working.
Another strange thing is that it populate the second list for one particular value (only at times).
The logic is that I have used a program unit to which i am passing 'list element' and 'query' and call it for each list in the when-list-change trigge.
Now its a very strange behaviour, I don't know what to do?
Your cooperation will be highly appreciated.
regards.

rolrollerx wrote:
Hi,
I have Nokia N8 (a great phone, btw) with Symbian Anna. I wanted to download the maps. But the PC Ovi Suite is just busy forever, without downloading anything (I used Performance Monitor to find out it was doing nothing for hours).
As I have unlimited data plan from my phone, I decided to try updating directly from the phone instead. It successfully downloaded the list of maps, but when I selected one of them
"No Wi-Fi network available. Please configure a WiFi access point in the phone Internet destination settings."
Why should I do that? I have a working connection on that phone (as evidenced by the successful download of the list of maps). So now, I am stuck. How can I download the maps?
Well, the suggestion is there. Use a router.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Strange behaviour in SOAP connection mode

Hello,
I created a custom worklist app using SOAP connetion mode and I experiencing strange behaviour using it.
Sometimes it works and sometimes not. The only difference beetwen the two working config is nearly nothing. Just server restart are performed to make it work or not. No config files or applications deployement are done between two restart.
So It's lotery to get it work.
When it doesn't work, I have the following error messaging (see below)
Does anyone have a clue to get it work each time ?
Regards.
ORABPEL-30509
Error in invoking task query service.
A client side error occured in invoking the task query service.
Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:183)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:200)
     at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:93)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.process(Unknown Source)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.execute(Unknown Source)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
     at javax.xml.soap.SOAPConnectionFactory.newInstance(SOAPConnectionFactory.java:32)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:131)
     ... 29 more

I also tried to change connection setting with
System.setProperty("javax.xml.soap.SOAPFactory", "com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl");
System.setProperty("javax.xml.soap.SOAPConnectionFactory", "com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory");
I get it work for ....... a day (or a restart I suppose) reverting back to initial settings to make it work again.
Does It mean SOAPConnectionFactories gets corrupted upon restart once I used them ?
Is a Service Request a good idea ?
Regards.

Ace 4710 strange behaviour

Hi, We have two ACE-4710-K9 (named LB01 and LB02) configured in HA mode. Besides Admin, on each of them there are tree context configured, named, ACADEMIC, COMMERCIAL, STREAMING. On LB01 the active context is ACADEMIC. On LB02 the active contexts are COMMERCIAL and STREAMING. Each context is configured with a FrontEnd and a BackEnd Vlan interface, and a "management" Vlan interface used for accessing and monitoring the device and for the downloading of the needed ssl certificates. Recently we upgraded the devices to Version A3(2.6) form a previous A3(2.4). After that upgrade we experienced some strange behaviour. From the context in STANDBY state we are not able to ping the host on the "management" Vlan interface, while there is no problem on the other Vlans. We see that the ICMP packets are sent to the Vlan, are replayed by the remote host BUT are not received at all on the LB01 or LB02. No messages in the log. Trying with 5 consecutive (failed) ping we can see that the counters of unicast packet output on LB01/LB02 Vlan is incremented by 5 BUT the unicast packets input counters is unchanged even if the remote host sent the replays. In the STREAMING context this behaviour isn't constant, ie the ping *sometimes* starts working for a few second and then returns to stop. In the other standby context the ping never works instead. In the active context all works fine. This strange problem prevents us to load the ssl certificates in the STANDBY context from the "management" Vlan. We was not able to find any reference to a similar problem in the Cisco documentation or Tac collection, so we are curious to know wheter someone else experienced such a behaviour. Thank you and best regards. Alessandro Asson - CINECA

Thanks,
I see you are using shared VLAN config in both ACE.
Same VLAN 1000 is used for both Admin and streaming context.
In this config, you may need to use the shared-vlan-host-id command as explained here:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/routing_bridging/guide/vlansif.html#wp1025243
In fact as explained:
'By default, the bank of MAC addresses that the ACE uses is randomly selected at boot time. However, if you configure two ACE appliances in the same Layer 2 network and they are using shared VLANs, the ACEs may select the same address bank, which results in the use of the same MAC addresses. To avoid this conflict, you must configure the bank that the ACEs will use.'
This would also reply to your question in the readme file:
SHOW ARP TABLE ON THE D01,D02,D07 ROUTERS SHOWS THE SAME MAC ADDRESS FOR
BOTH IP ADDRESSES OF LB01 AND LB02: is that normal ??
Hope this helps,
Dom.

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
          String result = "";
          try {
               // Execute a command
               Process child = Runtime.getRuntime().exec(command);
               // Read from an input stream
               InputStream in = child.getInputStream();
               int c;
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
               in = child.getErrorStream();
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
          } catch (IOException e) {
          return result;
     }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
          String line;
          String result = "";
          OutputStream stdin = null;
          InputStream stderr = null;
          InputStream stdout = null;
          // launch EXE and grab stdin/stdout and stderr
          try {
               Process process;
               process = Runtime.getRuntime().exec("cmd.exe");
               stdin = process.getOutputStream();
               stderr = process.getErrorStream();
               stdout = process.getInputStream();
               // "write" the parms into stdin
               for (int i = 0; i < commands.length; i++) {
                    line = commands[i] + "\n";
                    stdin.write(line.getBytes());
                    stdin.flush();
               stdin.close();
               // clean up if any output in stdout
               BufferedReader brCleanUp = new BufferedReader(
                         new InputStreamReader(stdout));
               while ((line = brCleanUp.readLine()) != null) {
                    result += line + "\n";
               brCleanUp.close();
               // clean up if any output in stderr
               brCleanUp = new BufferedReader(new InputStreamReader(stderr));
               while ((line = brCleanUp.readLine()) != null) {
                    result += "ERR: " + line + "\n";
               brCleanUp.close();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return result;
     }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Report S_ALR_87013542 strange behaviour

Hi All,
Report S_ALR_87013542 - Actual/Comm/Total/Plan in COAr crcy - is showing up cross signs in some of the columns.When the cross sign (like any other column value) is clicked the line item detail are sown correctly.
Has anybody encountered this kind of issue before ?
I googled and searched various forums but all in vain.
Please provide inputs to correct this strange behaviour of Report S_ALR_87013542. Thanks!
Regards
Dev

Hello Dev,
Did you execute report RKACOR04 for the affected object number and checked if this still happens ?
Suresh Jayanthi.

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Cursor shows strange behaviour in 10.9.5

HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchael

OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird.

Strange behaviour network?

Similar Messages

Maybe you are looking for