Strange behaviour of fan seemingly caused by something in Safari

I use the following web site for listening to new albums from a streaming connection.
http://3voor12.vpro.nl/luisterpaal/#
Sometimes it hangs during playback, from some unknown reason always at 07:13 minutes into the song, and this seems to cause my fan to start whurring.
This is very strange and I sort of wanted to know why it sets my fan going, and if there as any to fix this and stop it from at least setting my fan off, as I see no reason why the fan should do that.

Hi
Can't determine which song you are referring to? However, those songs are Adobe Flash driven. The increase in the fan speed can be due to poor coding on the developer's part - Flash draws on processing power. If the code is faulty, the processor can begin a cycle of overheating, hence the increased fan activity.
As you recently updated to 10.5.7, your Flash plugin was updated as part of that update. If you haven't done so, go to your Finder: Applications>Utilities folder. There, open Disk Utility. Select your HD on the left side of the panel. On the bottom middle in the First Aid panel, select "repair permissions". You'll see a fair number of permission conditions, which are nothing to be concerned about. You'll also see some Flash files being repaired. Once done, restart Safari. Go to the Safari Menu>Reset Safari. Select "cache", then reset. Now try that song again. If the fans kick in, I'd say poor coding is the culprit.

Similar Messages

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

Strange behaviour whit custom JTextField and JToolTip

Hello everyone. I hope I'm writing in the right section and sorry if I did not search for this issue but I really don't know which keywords I should use.
I'm using NetBeans 6.1 on WinXP and JDK 1.6.0_07, I have a custom JTextField with regex validation: when you type something that don't mach regex it shows a JToolTip. This JToolTip should disappear when the text typed is finally correct, or when the textfield loses focus (see code below).
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Point;
import javax.swing.JToolTip;
import javax.swing.Popup;
import javax.swing.PopupFactory;
public class MyJTextField extends javax.swing.JTextField implements FormComponent
private static Popup popUpToolTip;
private static PopupFactory popUpFactory = PopupFactory.getSharedInstance();
private boolean isValidated = false;
private String regEx = "a regex";
public MyJTextField()
this.addKeyListener(new java.awt.event.KeyAdapter()
public void keyReleased(java.awt.event.KeyEvent evt)
if(evt.getKeyCode()!=java.awt.event.KeyEvent.VK_ENTER)
validateComponent();
else if(evt.getKeyCode()==java.awt.event.KeyEvent.VK_ENTER)
if(isValidated)
((Component)evt.getSource()).transferFocus();
this.addFocusListener(new java.awt.event.FocusAdapter()
public void focusLost(java.awt.event.FocusEvent evt)
if(popUpToolTip!=null){popUpToolTip.hide();}
public void validateComponent()
if(text.matches(regex))
isValidated = true;
if(popUpToolTip!=null){popUpToolTip.hide();}
else
isValidated = false;
if(popUpToolTip!=null){popUpToolTip.hide();}
String error = "C'è un errore nella validazione di questo campo";
JToolTip toolTip = createToolTip();
toolTip.setTipText(error);
popUpToolTip = null;
popUpToolTip = popUpFactory.getPopup(
this,
toolTip,
getLocationOnScreen().x,
getLocationOnScreen().y - this.getPreferredSize().height -1
popUpToolTip.show();
}(I've cut it a bit, here's only the lines that involve JToolTip use)
I have many of them in a form, and when the first tooltip appears (on the first textfield I type in) it never disappears, while nex textfields work just fine.It seems the first tooltip appearing can't be overwritten or something similar. If I use this same component on any other NetBeans project, everithing works without issues.
I have some other custom components working the same way (JComboBox, JXDatePicker), and they had this "not disappearing tooltip" issue since I changed this
popUpToolTip = popUpFactory.getPopup(this, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
whit this
popUpToolTip = popUpFactory.getPopup(null, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
but if I try it on the JTextField all textfield's tooltips stay stuck there, not only the first one appeared (while other components still works fine).
This thing is really driving me crazy. Someone has an hint (or a link to another thread) which could explain this strange behaviour?
Thanks in advance.

BoBear2681 wrote:
Note that an SSCCE wouldn't require you to post any proprietary code.Hmmm... well, I'll try again to reproduce the issue and post an SSCCE.
BoBear2681 wrote:
That probably indicates that the problem is somewhere other than where you're currently looking.Yes, I suppose so. Maybe it's some interference between all the custom components I created, or maybe something else that apparently doesn't conern at all. If I cannot reproduce it in an SSCCE and I'll figure out what's the cause of this mess I'll post it here for future knowledge.
Many thanks for your advices. :)

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Strange behaviour of .swf movies - AS2/AS3

Hello from Italy,
     this is my first post and I think I need some help from the experts...
     I am putting together an interactive Flash movie which is made of several different small movies. For the sake of clarity, I'll call them A.swf, B.swf, ..., Z.swf. The movies are launched from each other depending on certain buttons I've implemented.
     The first one, A.swf, is actually a sort of "main menu": it grants access to all the other movies and it is also the point of return from them when a certain button is pressed.
     Important: All the movies are scripted in AS3, except for the last one which, for a number of reasons, is scripted in AS2.
     The return from any (but the last) movie to the first, say B.swf to A.swf, is implemented like this:
function eventResponseSole(event:MouseEvent):void {
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest = new URLRequest("A.swf");
myLoader.load(url);
sole_btn.addEventListener(MouseEvent.CLICK, eventResponseSole);
     This is, of course, AS3.
     The last movie, which is scripted in AS2, returns to A.swf like this:
luna_btn.onRelease = function() {
loadMovie("A.swf", _root);
     The strange behaviour is this: if I launch Z.swf and navigate with the proper button up to A.swf, everything works. But if I launch A.swf, navigate to Z.swf and attempt to return, this doesn't work. There are no problems, instead, moving up and down between movies scripted in AS3, that is with the first bit of code I've pasted. My guess is that the syntax in AS2 is correct, but something stops A.swf from "launching itself" when the control is transferred to Z.swf, but the movie is launched in the original window. Is this diagnosis reasonable? And if so, would someone kindly provide a way out of this? Re-doing Z.swf in AS3 is not an option, I'm afraid, it will have to stay as it is. I also have to add I've tried some solutions by setting _lockroot, but this doesn't seem to work.
     Many thanks in advance!
     Marco Olivotto

Mixing AS2 into AS3 is not without stipulations... and I am no expert on translating those stipulations, but here is what the Flash documentation says regarding the matter... the third paragraph may be significant to your case:
- ActionScript 3.0 code can load a SWF file written in ActionScript 1.0 or 2.0, but it cannot access the SWF file's variables and functions.
- SWF files written in ActionScript 1.0 or 2.0 cannot load SWF files written in ActionScript 3.0. This means that SWF files authored in Flash 8 or Flex Builder 1.5 or earlier versions cannot load ActionScript 3.0 SWF files.
The only exception to this rule is that an ActionScript 2.0 SWF file can replace itself with an ActionScript 3.0 SWF file, as long as the ActionScript 2.0 SWF file hasn't previously loaded anything into any of its levels. An ActionScript 2.0 SWF file can do this through a call to loadMovieNum(), passing a value of 0 to the level parameter.

A strange behaviour throwing Threads via anonymous class technique

Hi friends!
I've noted a strange behaviour executing the next code:
public class ResolAnonimes
 private int value;
 public ResolAnonimes(int value)
 this.value = value;
 public ResolAnonimes myMethod(int nThreads)
 final ResolAnonimes a = this;
 int nThreadsFor = nThreads - 1;
 for( int i=0; i < nThreadsFor; i++)
 new Thread(){
 public void run()
 System.out.println(Thread.currentThread().getName() + " has begun processing");
 doSomethingWith(a);
 System.out.println(Thread.currentThread().getName() + " has finished processing");
 }.start();
 this.value++;
 }//for loop
 return a;
 public static void doSomethingWith(ResolAnonimes a)
 System.out.println(a.value);
 public static void main(String Args[])
 ResolAnonimes first = new ResolAnonimes(1);
 ResolAnonimes result = first.myMethod(5);
}When I execute it, that's the output I get:
Thread-0 has begun processing
2
Thread-0 has finished processing
Thread-0 has begun processing
3
Thread-0 has finished processing
Thread-0 has begun processing
4
Thread-0 has finished processing
Thread-0 has begun processing
5
Thread-0 has finished processingWhere's the "1" printed? It doesn't appear! It seems it has thrown only 4 threads, not 5.
Am I doing anything wrong? Is it a bug?
Can you help me, please?
Thank you in advance.

Oh I'm sorry. I was changing the code because of privacy rerasons and I finally didn't type what I want.
Consider an array which all cells must be typed with the array lentgh. Moreover, the work is distributed by some threads.
I'm refering to something like this:
import java.util.Random;
import java.util.LinkedList;
public class MyArray
 private static int initialRow = 0;
 private static int lastRow = 0;
 private int[] vector;
 public MyArray(int size)
 vector = new int[size];
 public static boolean correctIndex(MyArray a )
 for(int i = 0; i< a.vector.length; i++)
 if(a.vector[i] != a.vector.length)
 return false;
 return true;
 public String toString()
 String s ="";
 for(int i=0; i < this.vector.length; i++)
 s += this.vector[i] + " ";
 return s;
 public MyArray operationWith(int nThreads)
 MyArray a = this;
 MyArray result = null;
 final Contenidor ctros = new Contenidor(new LinkedList());
 result = a.putTheIndexValue(nThreads, ctros);
 Thread consumerThread = new Thread( new Consumer( ctros, nThreads));
 consumerThread.start();
 try
 consumerThread.join();
 catch(InterruptedException ie){}
 return result;
 public MyArray putTheIndexValue(int nThreads, Contenidor ctros) //Este metode encara es experimental
 final MyArray a = this;
 final MyArray result = new MyArray( a.vector.length);
 final Contenidor ctrosR = ctros;
 for(int i = 0; i < result.vector.length; i++)
 result.vector= 0;
 int incRows = a.vector.length / nThreads - 1;
 initialRow = 0;
 lastRow= incRows;
 int nFilsFor = nThreads - 1;
 Thread[] vectorFils = new Thread[nThreads];
 for( int i=0; i < nFilsFor; i++)
 /*vectorFils[i] = */ new Thread()
 public void run()
 System.out.println(Thread.currentThread().getName() + " has begun processing");
 MyArray.putTheIndexValue( a, initialRow, lastRow);
 System.out.println(Thread.currentThread().getName() + " has finished processing");
 String s = Thread.currentThread().getName();
 ctrosR.put(s);
 vectorFils[i]*/.start();
 initialRow = initialRow + 1;
 lastRow = initialRow + incRows;
 new Thread()
 public void run()
 System.out.println(Thread.currentThread().getName() + " has begun processing");
 MyArray.putTheIndexValue( a, initialRow, a.vector.length - 1);
 System.out.println(Thread.currentThread().getName() + " has finished processing");
 String s = Thread.currentThread().getName();
 ctrosR.put(s);
 vectorFils[i]*/.start();
 return result;
 public static void putTheIndexValue( MyArray a, int initialRow, int lastRow)
 for(int i = initialRow; i <= lastRow; i++)
 a.vector[i] = a.vector.length;
public class Interface
 public static void main(String Args[])
 int nThreads = 2;
 int arraySize = 5;
 MyArray ma = new MyArray(arraySize);
 MyArray result = ma.operationWith(nThreads);
 if(MyArray.correctIndex(result))
 System.out.println("The operation has been done correctly");
 else
 System.out.println("THE OPERATION HAS NOT BEEN CORRECTLY!");
 System.out.println(ma.toString());
public class Consumer implements Runnable
 private Contenidor ctros;
 private int nFils;
 public Consumer(Contenidor ctros, int nFils)
 this.ctros = ctros;
 this.nFils = nFils;
 public void run()
 System.out.println(Thread.currentThread().getName() + "is waiting the total process to be finished");
 for(int i = 0; i< nFils; i++)
 System.out.println( Thread.currentThread() + " is waiting a thread to give me its chunk");
 String s = ctros.get();
 System.out.println( Thread.currentThread() + ": " + s + " has already given me its chunk");
 System.out.println(Thread.currentThread().getName() + "says all threads have finished");
import java.util.Queue;
import java.util.LinkedList;
public class Contenidor
 private int nDadesNoves;
 private Queue contenidor;
 public Contenidor(Queue contenidor)
 this.contenidor = contenidor;
 this.nDadesNoves = 0;
 public synchronized String get()
 while(nDadesNoves < 1)
 try
 wait();
 catch(InterruptedException ie){}
 nDadesNoves--;
 notifyAll();
 return (String)contenidor.poll();
 public synchronized void put(String s)
 contenidor.offer(s);
 nDadesNoves++;
 notifyAll();
}The output I get sometimes is:
THE OPERATION HAS NOT BEEN CORRECTLY!
5 5 5 5 5And I get also sometimes that:
THE OPERATION HAS NOT BEEN CORRECTLY!
0 5 5 5 5That's what I wanted to refer last post. I think I'm doing a correct synchronization. Am I wrong?
I don't understand that behaviour.
Anyone can help me, please?
Thank you in advance.

TCD - Peripheral Call Type 9 & 10 Strange Behaviour

Hi all,
I'm trying to get to the bottom of what causes ICM/UCCE to label a TCD record with Peripheral Call Type 9 or 10.
9 = Out
10 = Agent Inside
These values are used to populate the interval tables with ExternalOut and InternalOut
I'm seeing strange behaviour in that external calls are being classified PCT 10. Its worse on 1 pg pair and cucm cluster than the other (both pims agent ext length is 4 if this has any bearing).
From Europe PG and CUCM, most ExtOut calls are correctly classified as 9 (about 95%), but there are some 10:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 15:10:08
9
00415824xxxxx
10
4
18/02/2013 15:10:34
10
00415824xxxxx
10
4
But for Asia PG and CUCM, most ExtOut calls are classified as 10 (about 98%), but again there are some with the correct 9:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 11:54:14
10
0080346xxxxx
14
1
18/02/2013 12:09:59
9
0080302xxxxx
14
1
For info I also see external calls with dispostion 10 and 4 in Asia as Agent Inside so it doesn't seem to tie up with that.
Any thoughts on what could be the cause, I'm kind of thinking along the lines of CUCM on net/off net or soemthing like that?
Thanks
Neil

Attached the full length TCD record.
Also found a pdf document id 67988 External Calls Appear as Internal in IPCC Statistics which says:
CauseThis problem occurs due to a change in Cisco JTAPI version. In earlier versions of Cisco JTAPI, when a
caller calls an address outside the cluster, Cisco CallManager delivers the CallCtlConnNetworkReachedEv
and CallCtlConnNetworkAlertingEv events for the far−end address.
Cisco CallManager version 4.0 and later do not deliver these events. In these versions, the CallCtlConnection
for the far−end address goes to the ESTABLISHED state from the OFFERED state. The application receives
the CallCtlConnOfferedEv and CallCtlConnEstablishedEv events for the far−end address. The application
does not receive the CallCtlConnNetworkReachedEv and CallCtlConnNetworkAlertingEv events.
In order to receive the network events, you must turn on the "Allow overlap sending" flag on the route pattern
configured for the gateway. A new jtapi.ini parameter called "AllowNetworkEventsAfterOffered" is
introduced to allow the application to control the delivery of these events. Applications that need the network
events but cannot turn on this flag can use this new ini parameter to receive network events for outgoing calls.
They are having a PG/CUCM upgrade in a few weeks so its quite possible this may sort it.

Invalid character 0 ... error in xmlparsing??? strange behaviour

Hello Everyone,
I am experience a strange behaviour with XML processing in oracle. I have a xml that contains HTML as CDATA
as the content of a node.
When the HTML size is greater than 51 KB (or 51. something KB i was not able to find the exact boundary)
it's giving an error.
XML Parsing Failer
LPX-00216: invalid character 0 (0x0)
I tried to search for null character (chr(0)) but couldn't find one.
The strangest part is when i am trying with HTML size as 48 KB/24 KB (anyting less than 51 KB) it's getting passed and
the large HTML ( > 52KB ) is being build manually by copy pasting the small xml again and again. So if the small HTML
is getting parsed what's wrong with the large html which consist of nothing but the small html again and again?
When the HTML size is greater than 64KB oracle is throwing error saying node size cannot exceed 64KB which is fine.
First i thought that it was a character set encoding problem. The HTML is encoded in UTF-8 and the database is in
WE8MSWIN1252, but it seems that it is not the problem as i have explained above?
Can anyone help me what am i missing in here?
Thanks,
Ru

What database version are you on?
Can you provide us an example of XML you are using?
Can you show us the code you are using to parse it?
Can you tell us what you are expecting as output?
Based on your current description all we know is you have some XML and you're getting an error when you parse it. By itself that's pretty meaningless.

[solved] AMD Radeon - strange behaviour after mesa-update

Good afternoon Ladies and Gentlemen,
This is my first posting, I will try to give as much as detailed information refering to my problem as possible. Please be patient if I ask for solutions which for you all seem easy and logical, I am a Newbie.
The details: I am running a HP Pavilion 17 " AMD Quadcore laptop, 8gb Ram, Arch Linux 32bit Kernel 3.17.1 XFCE desktop with an AMD Radeon graphic card for about a few weeks now. Everything went fine so far, but last Saturday I did an update via pacman-Syu, the update included a mesa package. All went smooth as ever. Then after a reboot the XFCE desktop had stripes across the laptop screen, the mouse cursor had disappeared, also letters of the icon descriptions and the menus were missing, some strange "hieroglyphics" appeared instead of them. I wasn't able to downgrade the mesa-package as I nearly wasn't able to open the terminal because of the missing mouse cursor, then I managed somehow to get into the terminal and gave in the commands but the writing was incomplete and/or did not work because of these strange and missing letters.
No problem, I thought to myself, a fresh install will do the work, so I wipped my hard drive using Parted Magic, then I did a fresh Arch install (Netinstall), this time using LXDE instead of XFCE as my desktop environment. When I booted into the login screen first, it looked fine but after logging into the desktop all the stripes, the missing mouse cursor and the strange letters appeared again. So is there any solution to that strange behaviour ? Before the Saturday-update everything worked without any problems for weeks. BTW other OS work without these problems, I tried Macpup just for fun, no messing-up with my Radeon graphics card happened.
Sorry for my piss poor English I am Austrian. Sorry for eventually causing any inconvenience asking this question. Regards, Fladi.
Last edited by fladi (2014-11-04 05:01:28)

fafik1234 wrote:
I have the same problem, free drivers, xfce4, procesor AMD5350(Kabini), vga radeon R3 (8400)
downgrade linux kernel to linux-3.16.4
download: http://seblu.net/a/arm/packages/l/linux … pkg.tar.xz
pacma -U linux-3.16.4-1-i686.pkg.tar.xz
edit /etc/pacman.conf
IgnorePkg = linux linux-headers
screenshot
linux 3.17 xfce http://pics.tinypic.pl/i/00592/ek3z3ip81ky2.png
linux 3.17 compiz http://pics.tinypic.pl/i/00592/bddprwn4tey8.png
linux 3.16 compiz http://pics.tinypic.pl/i/00592/ja5ma8c7rdgl.png
On a laptop, free drivers, linux 3.17.1-pae, openbox, procesor core i5, vga integrated card - everything OK
The screenshots you posted match exactly to my problem ! Are you really sure the bug is coming from Kernel 3.17 ? I had this kernel running for about a week without any problems, the problems came when updating mesa.

Strange Behaviour P35 NEO2 Memory Throughput

Just Found something really odd. I have my MSI NEO2 FR jumpered to the 333 strap rather than the 266 it comes out of the box. There is no setting in the Bios to choose this so you have to change the jumpers. This gave me a big boost in memory performance (from 6500MB/s range to 8600MB/s range)so if you have one of these boards I suggest you do this!
The strange behaviour is that if I boot with FSB of 480 FSB pushing my memory at 1200Mhz and then down clock to 470 FSB using MSI's Dual Core Center with mem at 1175Mhz, I get Sandra XII SP1 memory throughput at 8735. If I boot with FSB of 470 I get Sandra XII SP1 memory throughput at 8550. This is using Memset with the same settings in both modes. This doesn't make any sense to me. I know it is only a 2% difference but a performance gain with the same settings and just a different way of getting there seems quite strange!
Anybody got any ideas why this would be?
Daz

Quote
I will test my system again with the 333Mhz strap and come back with my new results.

Strange behaviour on a 3d layer

Hi!
I have been using AE for many years now but still seem to bump in to strange behaviour that I can't explain once in a while.
This time it's about a composition that has several 3d-layers (shape layers) but no camera. When I try to scale the 3d-layers to make them larger by dragging a corner with selection tool, it actually shrinks the layer. It feels like everything is working in the opposite way it should. I also have spread the layers in z-space and for some reason layers with a bigger z-value seem to be _closer_ to the screen when usually positive values on z-axis will move the object further away and negative values closer to the camera. Is this simply happening because I don't have a camera in the scene or what could be causing this confusion?

If you have offset the anchorpoint Z value to a negative number like -500, then you scale up the layer it will move away from the default camera. If the z offset is positive then the layer will move toward the camera as you scale the layer.
I think that's what you've seeing. Make sure that your anchor point Z value is 0 and normal behavior should return.

Strange Behaviour after re-installing the OS

Hi people.
Basically, i've been experiencing some strange behaviour with Safari since re-installing my OS. I'm running Safari 3.0.4, and i'm on a G4 iBook running 10.4.11.
Firstly, it's not remembering passwords and user names to a few sites. My homepage is set to a Auto Forum i use daily. Now, when putting your password in you can check a little box that says 'Automatically log me in each time i visit'. I tick the box, when Safari ask's if i want the password to remembered i say yes. log-in as normal. If i then go away from the page and come back to it without quitting Safari, it's asking me to log in again. It remembers my password details etc, but doesn't perform the auto login like it used to. I've reset Safari, cleared Cookies, Cache etc, but to no avail. It's becoming quite annoying!
Secondly-the scroll bar on the right side of the screen keeps disappearing-and when it does, i can't manually scroll down the pages with the arrow keys either. Any thoughts? If manually moving from site to site, it's ok-it's when i access my bookmarks page and the scrollbar disappears, that it seems to remove it for good. I then have to quit Safari and re-launch it. But then i'm back to square one! If i need the favourites, i'm stuffed!
Any help appreciated...
Dan

Hi!
Thanks for the reply! I've started to download the update, got Pacifist already so it's just a case of the download finishing. I'm a bit worried though, i ran disk utility earlier and it came up with 2 errors, one of which couldn't be repaired. I hope it's not the HD on it's way out and causing problems as the new HD isn't even a year old yet...
I get a bold red message when using Disk Utility, which reads:
"Invalid Leaf record count
(Should be 2 instead of 46)
1 Volume could not be repaired"
I guess i'll give the Safari thing a go, then go for Disk Utility as per the other thread. Don't really want to wipe the HD and do another install-only done one 2 weeks ago!

Strange behaviour with Subjective Assessments comments in SSM10 SP10

Good day community,
We have strange behaviour with Subjective Assessments comments in SSM10 SP10.
We have been using this successfully for 3 quarters.
The scenario is as follows.
Business users capture Subjective Assessment comments successfully and these can be viewed on the scorecard overview for Q3. This can be printed to PDF successfully as well.
A few hours later, when the user accesses the Scorecard Overview, the Q3(March 2014) comments are now replaced with the
Q2(Dec 2013) comments.
This has not happened previously. We have recently deployed Internet Explorer (IE) 10 to some of the machines that previously used IE9 or IE8. Could this be a contributing factor?
This has happened with one database on 2 contexts. Although the database/scorecard in question has been created on SSM10, we have recently upgraded the rest of the organisation onto SSM10 from SSM7.5 but those are completely separate databases.
We have not found a pattern yet, but there is only one assigned administrator for this database and she often has 'funny' things happen on her machine. Could it be possible that there's a virus on her machine? Or maybe there's a sequence or combination of steps that she's doing that could cause this? We have not been able to recreate the situation in our developer offices.
Any ideas on this strange behaviour would be appreciated.
Regards,
Natasha

Hi everyone,
We have since noticed that if you go into the Administrator > Context Management > and change the "Person Responsible" and then save, once you go back to the Scorecard Overview all the Q3 comments have been overwritten with the Q2 comments.
This happened on a different machine so it seems there could be a bug in the Administrator.
Any thoughts on this strange behaviour would be appreciated.
Regards,

Strange behaviour of FileOpenPicker (Crashes)

Hello,
I have a strange behaviour of my implementation of FileOpenPicker (use it to select an image file). My Implementation works just fine when debugging my app on my device (Samsung Ativ S with WP 8.1), but when I start my app directly on the phone without debugging
the FileOpenPicker crashes when calling (I can see the Picker just for a moment..)
openPicker.PickSingleFileAndContinue()
I have implemented IFileOpenPickerContinuable on to different pages. I have this strange behaviour only through one of the pages.
BR,
juvi
IFileOpenPickerContinuable
IFileOpenPickerContinuable

Hi juvi123,
Based on your description, I can see that your app works well with debugging but it crashs without debugging. I wonder if you have tried the realse mode. Can you get the same result in the realse mode? I will recommand you uninstall the app on your device,
then deploy it again to see if you can get the right result.
Besides, according to the behaviour, it seems that you think this openPicker.PickSingleFileAndContinue() line causes the crash. It may be not caused by this line. So it will be better if you can post the reproduce project and your OS version in here.
At same time I hope you can do some test in your side to help find the issue, first please try to use the emulator and a different device to test if you can reproduce it. Then since this strange behaviour only happens in one of the pages,
please try to check the difference between this crash page and others normal pages. You can try to reduce the functions of the crash page to help narrow down this issue.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Strange behaviour of fan seemingly caused by something in Safari

Similar Messages

Maybe you are looking for