Strange Behaviour of Query. Any Inputs?

I have a query as follows:
select t1.col1 from table1 t1 where t1.col2=(
select t2.col1 from table2 t2 where t2.col2=(
select t3.col1 from table3 t3 where t3.col2=somevalue));
When executed, it gives me the expected results. But when I execute the subquery alone as
select t2.col1 from table2 t2 where t2.col2=(
select t3.col1 from table3 t3 where t3.col2=somevalue);
it gives me the error as invalid column.
How does the main query give me the correct results when the subquery gives an error? Can anyone explain this?
Thanks in advance?

Hello,
Please write your actual query here, as I created such type of query and it is working fine here.
Adi

Similar Messages

Strange behaviour after querying a friendly device name

Hi,
I have observed some very strange behaviour after querying the friendly name of an audio capturing device. This is my code:
#include "stdafx.h"
#include <mmdeviceapi.h>
#include <Functiondiscoverykeys_devpkey.h>
int main(int argc, char *argv[]) {
    HRESULT hr = CoInitializeEx(0, COINIT_APARTMENTTHREADED);
    if(FAILED(hr)) throw;
    IMMDeviceEnumerator *pIMMDeviceEnumerator = 0;
    hr = CoCreateInstance(__uuidof(MMDeviceEnumerator), 0, CLSCTX_INPROC_SERVER, __uuidof(IMMDeviceEnumerator), (LPVOID *) &pIMMDeviceEnumerator);
    if(FAILED(hr)) throw;
    IMMDeviceCollection *pIDeviceCollection = 0;
    hr = pIMMDeviceEnumerator->EnumAudioEndpoints(eCapture, DEVICE_STATE_ACTIVE, &pIDeviceCollection);
    if(FAILED(hr)) throw;
    IMMDevice *pIMMDevice = 0;
    hr = pIDeviceCollection->Item(0, &pIMMDevice);
    if(FAILED(hr)) throw;
    IPropertyStore *pIPropertyStore = 0;
    hr = pIMMDevice->OpenPropertyStore(STGM_READ, &pIPropertyStore);
    if(FAILED(hr)) throw;
    PROPVARIANT propVariant;
    PropVariantInit(&propVariant);
    pIPropertyStore->GetValue(PKEY_Device_FriendlyName, &propVariant);
    PropVariantClear(&propVariant);
    pIPropertyStore->Release();
    pIMMDevice->Release();
    pIDeviceCollection->Release();
    pIMMDeviceEnumerator->Release();
    CoUninitialize();
    return -1;
Please ignore the strange error handling, it's just to make the example code short.
The problem is the return value (as can be seen in the output window of Visual Studio after running the program or using "echo %errorlevel%" in cmd.exe). Certainly, one would expect to get -1. However, I get 0 instead of -1. What makes this
really strange is that -1 is properly returned when the line "pIPropertyStore->GetValue..." is commented out. Why does this have any effect on the return value of the process? I have observed this on two different Window 7 machines with different
soundcard configurations. However, I did another test on a Windows 8.1 machine, where everything worked correctly.
Can anyone explain what's going on here?
Thanks,
Holger

OK, here's what's going on.
Everything goes fine until main() exits.
At that point, mmdevapi.dll's DllMain is called with lpReserved set to a non-NULL value, which is to say, "don't bother to clean up."
mmdevapi.dll decides to clean up anyway (for shame) and calls into some SetupAPI.dll functions.
SetupAPI.dll is waiting on a critical section, but at that point ntdll.dll kicks in and says "you know what, the process is shutting down, and this is the last thread, so I can guarantee you this critical section will never be set." ntdll.dll then
terminates the process, and main()'s exit code is lost.
Matthew van Eerde

[SOLVED] Strange behaviour of Query-by-Example (QBE) fields

Hello,
Jdev 11g TP3.
We have a QBE-Block with input fields.
Follwing steps are performed:
1) Change to find mode: #{bindings.Find.execute}
2) Enter search criteria into the fields
3) execute query: #{bindings.Execute.execute}
4) change to find mode again --> previously entered search criterias are shown --> OK
5) clear the search criteria in all fields
6) execute query again
7) PROBLEM: query is executed with the OLD search criteria again.
If we change into query mode again, the OLD search criterias are shown again
(BUT not for ALL fields).
8) Even wildcards (* or %) doesn't change the situation.
But it's possible to enter a different (but not empty) search criteria into the field.
Details:
=====
For some of the QBE-Fields the search criteria can be cleared but for some of them not.
Differences between this fields:
a) mandatory fields (also part of the key in the view model and NOT NULL in DB) --> criteria can't be cleared
b) non-mandatory fields (also not part of the view model and NULL-able in DB) --> criteria can be cleared
I tried to change one of the mandatory fields to non-mandatory and to be not part of the key in the view model but behaviour doesn't change?
Can anybody confirm this behaviour as bug or is there a mistake on my side?
BR
Peter
Message was edited by:
hofespet

Seems to be solved in TP4.
br
Peter

Strange behaviour when passing many input parameters to web service

Hello!!!
I developed a web service with 52 input parameters using tomcat+axis!
While testing it in my development enviroment everything was working fine
(LAN consisted of three windows 2000 server machines!!!)
When i deployed it in my customer enviroment (VPN with 200 isdn connections) i get a very strange error:
AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (0)null
faultActor:
faultNode:
faultDetail:
{}string: return code: 0
(0)null
when i used tcptracer in order to understand what is going on,
I realised that the error occurs when the http request is more than 1350 bytes.
Can someone explain this behaviour?
thanks in advance!
sarantos

Hi Sarantos,
I think, there is nothing wrong in the axis engine nor the http request limits as you said. I tried the same passing a 60 kb String as an argument to an operation , getting the results perfectly.
So problem could be with the method capacity size of your implementation. (I think default it is 64kb)
bye
Charlie

Strange behaviour with query after adding rownum

Hi,
We have query which is similar to the one below
select * from (inner query) where rownum <=25.
The inner query return only one record but when the entire query is executed we get 2 records and the the second record does not have any data. If we execute the query without the where clause then the query returns only one records. There are many queries similar to the above one and all works fine. The same query works in in all the environment except production. We are using oracle 10g. It seems like a bug. Can somebody help in resolving this issue.
Thanks,
Manohar Puttaswamy

Due to security policies we are not supposed to post the execution plan and the queries. I am extremely sorry for that. We have some workarounds. We have a distinct in the inner query. If we remove distinct and add group by in the query the query is working fine. And also we have an exists clause in the inner query if we replace the exists clause with an in clause then then also the query is executing fine. The main problem i am facing is i am not able to create a testcase.

Strange behaviour - any ideas?

Strange behaviour began when i was unable to open a new page in photoshop.
The next day i was unable to print from word or photoshop or emails.
However i could print from freehand and excel!
I used disk 1 to verify and repair disk.
this did not solve the problem as then when i tried to open Safari the toolbar opened but no window.
I have reinstalled the operating system making an archive but this also has not had an effect.
Any ideas on what to do next or should I just reinstall the operating system over the old one?
many thanks 4 any help

Sarah, to help the knowlegable users here please advise which model G5 iMac you have & include this info in your system info preference by clicking on the "My Settings" link in the right hand column.-->
This way, you won't have to keep repeating yourself and the knowlegable users will be able to provide you with the correct trouble shooting information/solutions if the problem is your computer.
Also, it will be helpful if you will advise which version of Word, Photoshop you have, which email program & the type of printer you are using.
Thank you.

While Executing Query with out giving any inputs to selection variables

Hi,
While Executing Query in the Query Designer with out giving any inputs to selection variables. I got an error message in german Language this is translating of german to English .
In the reading of the data, mistakes appeared. Navigation the value is contains possible "New Delhi" of feature 0CITY40 at that
10. ten place a mistake Notification Number BRAIN 290
This is very urgent can you please help me .
Thanks & regards
Subba Reddy.

Double click this error message it will give you more details. Post that.

Strange dock/spotlight folder launch behaviour...any clues?

Background:
I recently upgraded from 10.5.7-10.5.8, and shortly after had a system crash which required hard reboot. I booted from Leopard startup DVD, ran disk & permissions repair in Disk Utility, then continued as normal, but this strange behaviour turned up.
Problem:
When trying to open a folder using either Spotlight or the Dock, an application is launched instead of the folder being opened. I first noticed this while using Quicksilver, which showed the same behaviour, so I presume they all share something for such launching/opening. The application being erroneously launched is consistent, but on uninstallation of that app another application is consistently launched instead.
Fix attempts (none of which have worked):
1) Uninstallation application erroneously launched
2) Reinstalling Quicksilver
3) Upgrading Quicksilver
4) Rebuild Spotlight index
5) Rebuild Launch Services cache
This one baffles me, although I presume it's something setting at the OS X system level which determines the behaviour of "open folder" from such a link. The Finder works normally when double-clicking/Cmd-O folders, as do aliased folders in Finder windows. It only seems to show up with Dock/Spotlight.
Any clues anyone?

Launch Activity Monitor >> System Memory and keep an eye on it. Note especially your "Free" memory and "Page outs". As memory is used, if it is not released back your Free count count will get lower and lower, then you will begin paging out.
The behavior you describe seems like the kind of issues you get with low memory or a hard drive with insufficient free space.
-mj
Message was edited by: macjack

Strange problem. I have upgraded to OSX 10.9.1 but cant get wifi to work so forced to be hard wired. Any inputs appreciated.

Hi All,
Strange problem. I have upgraded to OSX 10.9.1 but cant get wifi to work so forced to be hard wired. Any inputs appreciated. Problem is I cant even reinstall it as I saw on a thread reason, it needs wifi to begin.

It only needs an internet connection - wired or wireless.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
          String result = "";
          try {
               // Execute a command
               Process child = Runtime.getRuntime().exec(command);
               // Read from an input stream
               InputStream in = child.getInputStream();
               int c;
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
               in = child.getErrorStream();
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
          } catch (IOException e) {
          return result;
     }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
          String line;
          String result = "";
          OutputStream stdin = null;
          InputStream stderr = null;
          InputStream stdout = null;
          // launch EXE and grab stdin/stdout and stderr
          try {
               Process process;
               process = Runtime.getRuntime().exec("cmd.exe");
               stdin = process.getOutputStream();
               stderr = process.getErrorStream();
               stdout = process.getInputStream();
               // "write" the parms into stdin
               for (int i = 0; i < commands.length; i++) {
                    line = commands[i] + "\n";
                    stdin.write(line.getBytes());
                    stdin.flush();
               stdin.close();
               // clean up if any output in stdout
               BufferedReader brCleanUp = new BufferedReader(
                         new InputStreamReader(stdout));
               while ((line = brCleanUp.readLine()) != null) {
                    result += line + "\n";
               brCleanUp.close();
               // clean up if any output in stderr
               brCleanUp = new BufferedReader(new InputStreamReader(stderr));
               while ((line = brCleanUp.readLine()) != null) {
                    result += "ERR: " + line + "\n";
               brCleanUp.close();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return result;
     }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

KYF exhibits strange behaviour with decimals

Hi everybody,
a DEC-key figure (IOBJ maintenance: additional properties->BEx->decimal places: Nothing Defined) exhibits strange behaviour regarding the treatment of decimals.
When looking at the data in the cube (InfoCube maintenance->content) the value is 2,086.
In the query the result is 2.0900000000 (%).
Now comes the problem: in BPS (in the buffer) the value is 2,08. The system simply truncates the figure! This is the value which is also used in the FOX and produces the wrong result.
I need the system to sensibly round the values correctly to 2 decimals OR work with an additional decimal place. How can this be done?
Thanks for any input,
Martin

Hi,
In the manual planning, while designing the layout, there is a setting in data columns tab called decimals. You have to insert 2 under this. Then in the layout data will be displayed with 2 decimal places.
Hope this helps.
Regards,
Isha

Report S_ALR_87013542 strange behaviour

Hi All,
Report S_ALR_87013542 - Actual/Comm/Total/Plan in COAr crcy - is showing up cross signs in some of the columns.When the cross sign (like any other column value) is clicked the line item detail are sown correctly.
Has anybody encountered this kind of issue before ?
I googled and searched various forums but all in vain.
Please provide inputs to correct this strange behaviour of Report S_ALR_87013542. Thanks!
Regards
Dev

Hello Dev,
Did you execute report RKACOR04 for the affected object number and checked if this still happens ?
Suresh Jayanthi.

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour of Removal of Alpha for Info object in Quality system

Strange behaviour of Removal of Alpha for Info object in Quality system as compared to Development system.
Hi,
The data for an info object Key in the DSO was 00000000000000000000000000123. I removed Alpha for the info object and data was corrected to 123 in the DSO in development system.
Now, when i transported the info object without alpha to quality and loaded data into DSO, the data is still the same with leading zeros.
I dont want to write routine to remove leading zeros, as I have values as 0. If i write routine, all zeros will be removed and this will be blank.
Both development and quality have same patches applied and are on same level.
Why is this strange behaviour in quality system...
Any inputs?? please suggest.
Thanks.
Lavanya

Hi,
Did you drop and reload the data after changing the conversion?
Regards,
Raghavendra.

Populate List from Database (Very Strange Behaviour)

Dear Fellows,
I have developed a from which has two lists One for Major (say) and Other for Minor (say), thesr minors are based on the value of Major.
Now I have developed this system on Windows XP Professional, Developer/2000 6i and Oracle 8i (release 8.1.7).
Major list is populated from database and it shows all major values now using 'when_list_change' trigger the minor list is populated from the database based on the value of major list. Interestingly enough it is working fine without any problem.
Now I have deployed the software to Windows 2000 Professional/Server (tried on both), Developer/2000 6i and Oracle 8.0.5, but strangly the lists are not working now. First list (major) is still working but the other dependent lists are not working.
Another strange thing is that it populate the second list for one particular value (only at times).
The logic is that I have used a program unit to which i am passing 'list element' and 'query' and call it for each list in the when-list-change trigge.
Now its a very strange behaviour, I don't know what to do?
Your cooperation will be highly appreciated.
regards.

rolrollerx wrote:
Hi,
I have Nokia N8 (a great phone, btw) with Symbian Anna. I wanted to download the maps. But the PC Ovi Suite is just busy forever, without downloading anything (I used Performance Monitor to find out it was doing nothing for hours).
As I have unlimited data plan from my phone, I decided to try updating directly from the phone instead. It successfully downloaded the list of maps, but when I selected one of them
"No Wi-Fi network available. Please configure a WiFi access point in the phone Internet destination settings."
Why should I do that? I have a working connection on that phone (as evidenced by the successful download of the list of maps). So now, I am stuck. How can I download the maps?
Well, the suggestion is there. Use a router.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Strange Behaviour of Query. Any Inputs?

Similar Messages

Maybe you are looking for