Strange Behaviour of Sender file CC

Hello friends,
I have configured sender communication channel.It is NFS CC without content conversion.
I have mentioned the filename as abc*.txt.
But when file with naming convention as xyz.txt was placed in the same folder.it got picked up by XI sucessfully.Also transfered to end system to.
Please let mw

> I have configured sender communication channel.It is NFS CC without content conversion.
>
> I have mentioned the filename as abc*.txt.
Without FCC that means xml file. Correct?
So use abc*.xml and if doesn't work then check the file name properly because it is case sensitive.
Regards,
Sarvesh

Similar Messages

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

Finder Strange behaviour: folder and file icons not showing, then they disa

Yesterday I was trying to install the postgresql package from (http://web.mac.com/dru_satori/iWeb/PostgreSQLforMac/Welcome.html). Actually I had an older version of their package, i uninstalled it, tried installing the new package, but kept receiving errors that the installation was not correct.
Now the point of this question, as I was doing the above, i started to notice that some files (either on my desktop or in a folder window) are not showing the icon. Only the label is showing! when I click on such a file, the file disappear (i mean even the label is gone).
I have completed permission repairs, disk repairs. I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory. I have also re-lunched the finder using the force quit window. I have also trashed the com.apple.finder.plist and logged out and then logged in again. I have just noticed that (pages) is asking for the serial number! I have this program installed months ago! It seems that some other files are also getting damaged!
Is there something that I am missing? Is this a bug? is there any solution, because this is very annoying and it might indicate a bigger problem that I am not aware of.
thank you for your help
PowerMac G5 Dual Mac OS X (10.4.4) 4.5 GB RAM

I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory.
Good first troubleshooting step!
Now log back into your normal user account: (In your case I would try preferences first)
1. Navigate to ~(yourhome/library/fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly;
• Navigate to ~(yourhome/library/preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
   • Navigate to yourhome/library.
   • Get Info (Command - i) on folders for apps you are having problems with.
   • Open the "Ownership & permissions" disclosure triangle.
   • Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
   • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
If the issue persists navigate to yourhome/library/caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
-mj
[email protected]

[Solved] Strange behaviour when searhing files in Gnome 3.8 overview

Searching for "spot" finds the file "The Ink Spots - Maybe.mp3" but searching for "maybe" does not. Any ideas?
Last edited by discon (2013-06-13 07:51:38)

OK, I think I got it. "maybe" is a stop word and, apparently, file names are treated as *text* so "maybe" is ignored.
$ tracker-search spots
Results:
file:///home/.../The%20Ink%20Spots%20-%20Maybe.mp3
The Ink Spots - Maybe.mp3
$ tracker-search maybe
Search term 'maybe' is a stop word.
Stop words are common words which may be ignored during the indexing process.
Results:
$

Strange Behaviour with JPEG files on Premiere Cs5 Timeline

Whew! Have not seen this problem before. Have been using Premiere since Ver 3.
I am in a project where I am dropping Jpeg images on the time line and creating a slideshow.
I am doing lots of motion with keyframes on scale., position etc .
When I render the project some images disappear and another image appears several times in their place.
Here is the link to the uncompleted video :
http://youtu.be/GA6iSXkFhK0
Notice the image of the bride and groom at front of the car keeps repeating itself, whereas other images were placed in the timeline.
Help would be appreciated. I have redone the project 4 times.

BTW, this issue should be fixed in Premiere Pro CS5.5. Users of Premiere Pro CS5 will need to use the workaround that Colin mentioned.

Strange Behaviour in File class

Hi,
I noticed a strange behaviour. There is a file contains unicode letters in its name. I tried
File file=new File("c:\@ℏℑ\@�⅙0.txt");
file.exists() // I checked existence of file using this statement which returns false although file is exist.
What can I do ?
Thanks

Hi,
Thanks for the reply.
I am showing the sample:
//This is a list method
static void list(File file) {
        if (file.isDirectory()) {
            File[] files = file.listFiles();
            if (files != null) {
                for (int i = 0; i < files.length; i++) {
                    if(files.isDirectory()){
list(files[i]);
}else{
System.out.println(files[i].getAbsolutePath() + " " + files[i].exists());
System.out.println(file.getAbsolutePath() + " " + file.exists());
if I call this method like this from main method:
File file=new File("C:\\Documents and Settings\\Neha\\Desktop\\ttt\\@ℏℑ\\@�⅙0.txt");
list(file);
output:
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt false [with Jre5]
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt true [with Jre6]
if I call like this
File file=new File("C:\\Documents and Settings\\Neha\\Desktop\\ttt");
list(file);
Output:
C:\Documents and Settings\Neha\Desktop\ttt\@??\@�?0.txt true
C:\Documents and Settings\Neha\Desktop\ttt\@??\Chambal25.txt true
C:\Documents and Settings\Neha\Desktop\ttt\@?? true
C:\Documents and Settings\Neha\Desktop\ttt true

Aliases file - Strange Behaviour

Greetings all,
I've been having some strange behaviour with my Postfix installations lately. My logfiles are filled with intermittent entries of:
Oct 17 18:52:10 xserve1 postfix/smtpd[4117]: table hash:/etc/aliases(0,lock|fold_fix) has changed -- restarting
Oct 17 18:52:12 xserve1 postfix/local[4129]: table hash:/etc/aliases(0,lock|no_regsub|no_proxy|no_unauth|fold_fix) has changed -- restarting
This would seem to be a minor nuissance, but unfortunately it seems that mails are arriving in the second or two it takes for Postfix to restart, and are getting rejected or delayed because the service isn't available.
Looking at the /etc/aliases/postfix file, something seems to be intermittently touching it. I don't see any changes to the file content, but the modification date is updated, and an extended (@) file attribute is added for "com.apple.TextEncoding".
The only recent changes I have made to my config were to enable SASL with some directives ("smtpd_tls_auth_only = yes" for example) to ensure proper security.
My servers are running 10.6.5 and 10.6.4. Any suggestions would be appreciated. Thanks.

Looking at the logs, I'm begining to suspect that the offender is "com.apple.wikid.mailinglists". I don't use group mailing lists so I've disabled this item by adding disabled-true to its plist. Hopefully this solves the problem.

Sender File Adapter Behaviour

Hi everyone,
Could it be possible to create a XML with plain structure from flatfile that is with out recordset.
Eg., my flatfile will be like
name1,age1,sal1
name2,age2,sal2
I have to get the xml as
<Recordset>
<name>name1</name>
<age>age1</age>
<sal>sal1</sal>
</recordset>
<Recordset>
<name>name2</name>
<age>age2</age>
<sal>sal2</sal>
</recordset>
The important thing is <Recordset> element should be created under 'Recordsetname' parameter in sender adapter.
My question, Is it possible to create a xml without recordset as shown above because there is no recordset to specify in 'recordset structure' parameter.
And Is it possible to generate complex XML structures using sender file adapter, i.e subnodes with parent child relationship.
Regards,
Yuva

Hi,
Check this out.. <a href="http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm[url=http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm]http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm[url=http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm]http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm</a>
Also, you can not create XML without recordset name since this is the name of the message type you create in Repository. You can manipulate only the sub nodes in the message type (data types).
VJ

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
          String result = "";
          try {
               // Execute a command
               Process child = Runtime.getRuntime().exec(command);
               // Read from an input stream
               InputStream in = child.getInputStream();
               int c;
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
               in = child.getErrorStream();
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
          } catch (IOException e) {
          return result;
     }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
          String line;
          String result = "";
          OutputStream stdin = null;
          InputStream stderr = null;
          InputStream stdout = null;
          // launch EXE and grab stdin/stdout and stderr
          try {
               Process process;
               process = Runtime.getRuntime().exec("cmd.exe");
               stdin = process.getOutputStream();
               stderr = process.getErrorStream();
               stdout = process.getInputStream();
               // "write" the parms into stdin
               for (int i = 0; i < commands.length; i++) {
                    line = commands[i] + "\n";
                    stdin.write(line.getBytes());
                    stdin.flush();
               stdin.close();
               // clean up if any output in stdout
               BufferedReader brCleanUp = new BufferedReader(
                         new InputStreamReader(stdout));
               while ((line = brCleanUp.readLine()) != null) {
                    result += line + "\n";
               brCleanUp.close();
               // clean up if any output in stderr
               brCleanUp = new BufferedReader(new InputStreamReader(stderr));
               while ((line = brCleanUp.readLine()) != null) {
                    result += "ERR: " + line + "\n";
               brCleanUp.close();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return result;
     }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Strange behaviour of weblogic 6.1 while delivering charts

Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, so I
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write the right
file. But that's too late because my script tries immediatly after the OK to
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

You should post on interest.webserver, but 200 OK is standard http response.
Don't confuse the headers with the content. I would expect that any other
simple http server functions in the same manner.
cheers
mbg
"Martin Haberstroh" <[email protected]> wrote in message
news:[email protected]..
Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, soI
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write theright
file. But that's too late because my script tries immediatly after the OKto
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

Strange behaviour in "Do - Until" statement

Hi,
I'm having a strange behaviour in a script I'm creating. The purpose of the script is to update some files in some folders. In the case that more folders need to use the script, I'm importing the folders name and path from a CSV file (much easier to read
it from there instead of hardcoding the folders in the code). As you can see, I add a number at the beginning of the folder's name, and then I let them choose which folder number do they want to update.
# Import from CSV File
$name = @()
$path = @()
$bkpPath = @()
Import-Csv $AppsFile |
ForEach-Object {
$name += $_.Name
$path += $_.Path
$bkpPath += $_.bkpPath
Write-Host "Choose the folder to update:"
Write-Host ""
$count = 1
foreach ($n in $name) {
Write-Host $count " - " $n
$count += 1
Do {$opt = read-host -prompt "Enter the option number"}
Until ($opt -lt $count -AND $opt -gt 0)
The problem appears when I started debuging the script, and try to input strange characters. The idea of the "Do - Until" statement, is that the user enters a loop until they choose a correct option. It works ok when it doesn't let you input letters,
or numbers outside the range I'm using.
The strange behaviour appears when I enter for example "0." (The important part is the DOT after the zero). There, it sends me to the last option in my CSV file. If I put "<number>.", it reads it as if it were "<number>".
And if I input a number out of range plus a final dot, it breaks my script (instead of just keep looping as it's supposed to).
Does anyone even understand the issue? =P It's really strange, I don't know if there is another way to limit the input...
Thanks,
Regards

$opt is a string, and you're trying to compare it to numbers, which is probably going to give you headaches. I tend to write those types of loops like this:
$opt = $null
while ($true)
$string = read-host -prompt "Enter the option number"
if ([int]::TryParse($string, [ref]$opt) -and $opt -lt $count -and $opt -gt 0)
break
Simply because the validation can get kind of complex sometimes, and I think it's ugly to jam it in after an "until" statement, even though the end result is the same.

Strange behaviour of Mouse-Events and Range size

Hello,
i found a strange behaviour of the Paragraph-Ranges in Word and can't explain this myself.
I have a add-in with a Custom Task Pane "UserControl1" and a button "Button1":
dropbox.com/s/zz2m0out5rvds0m/word.jpg
This is the Code for the user control:
public partial class UserControl1 : UserControl
public UserControl1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
showRanges();
private void button1_MouseEnter(object sender, EventArgs e)
showRanges();
private void showRanges()
Debug.WriteLine("-------------------------------------");
foreach (Microsoft.Office.Interop.Word.Paragraph para in Globals.ThisAddIn.Application.ActiveDocument.Paragraphs)
Debug.WriteLine(para.Range.Start.ToString() + " - " + para.Range.End.ToString() + " | " + para.Range.Text.ToString());
The mouse-enter and mouse-click events of the button, prints out the ranges of the current paragraphs. In this example it outputs:
0 - 15 | The first line
15 - 32 | And a second one
Thats fine!
And now the strange stuff starts: When i change something in the first line in the document like "The VERY first line" and use the button again, i got different range outputs for mouse-enter and mouse-click events.
mouse-enter event (wrong ranges):
-------------------------------------0 - 143 | The VERY first line
143 - 160 | And a second one
mouse-click event (correct ranges):
0 - 20 | The VERY first line
20 - 37 | And a second one
Why the hell I get wrong Ranges when I use the mouse-enter event??? (When I enter the button with mouse a second time, it shows the correct ranges again).

Hi Torben,
What is Word version?
According to my test in Word 2013, the code you provided works fine for me.
I changed the code as below:
private void showRanges(string eventname)
Debug.WriteLine(eventname + "-------------------------------------");
foreach (Microsoft.Office.Interop.Word.Paragraph para in Globals.ThisAddIn.Application.ActiveDocument.Paragraphs)
Debug.WriteLine(para.Range.Start.ToString() + " - " + para.Range.End.ToString() + " | " + para.Range.Text.ToString());
private void button1_MouseEnter(object sender, EventArgs e)
showRanges("Button MouseEnter");
private void button1_Click(object sender, EventArgs e)
showRanges("Button Click");
The document:
The output:
The result is same.
There might be something else at the end of the first line.
If you change current document to .zip and find document.xml, what does it look like?
Here is my document.xml:
<w:body>
<w:p w:rsidR="001347D9" w:rsidRPr="001511D8" w:rsidRDefault="001511D8">
<w:pPr>
<w:rPr>
<w:sz w:val="72"/><w:szCs w:val="72"/>
</w:rPr>
</w:pPr>
<w:r w:rsidRPr="001511D8">
<w:rPr>
<w:sz w:val="72"/>
<w:szCs w:val="72"/>
</w:rPr>
<w:t>The VERY first line</w:t>
</w:r>
</w:p>
<w:p w:rsidR="001511D8" w:rsidRPr="001511D8" w:rsidRDefault="001511D8" w:rsidP="001511D8">
<w:pPr>
<w:rPr>
<w:sz w:val="72"/><w:szCs w:val="72"/>
</w:rPr>
</w:pPr>
<w:r w:rsidRPr="001511D8">
<w:rPr>
<w:sz w:val="72"/>
<w:szCs w:val="72"/>
</w:rPr>
<w:t>And a second one</w:t>
</w:r>
<w:bookmarkStart w:id="0" w:name="_GoBack"/>
<w:bookmarkEnd w:id="0"/>
</w:p>
<w:sectPr w:rsidR="001511D8" w:rsidRPr="001511D8">
<w:pgSz w:w="12240" w:h="15840"/>
<w:pgMar w:top="1440" w:right="1440" w:bottom="1440" w:left="1440" w:header="720" w:footer="720" w:gutter="0"/>
<w:cols w:space="720"/>
<w:docGrid w:linePitch="360"/>
</w:sectPr>
</w:body>
Is there anything different?
I have uploaded the sample document for your test, please check:
https://onedrive.live.com/redir?resid=AD77AE76D657E280!166&authkey=!AFfIP0eVTDQdMAc&ithint=file%2cdocx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

FileName in Sender File Adapter Module

Hi Folks,
In my sender file adapter have written a module to read the picked file name. The protocol used is NFS.
Notice that the file name read in the module has the absolute path, including the directory path. E.g The file name xyz has to be picked from source directory
XIServer\Outbound. In the module when I retrieve the file name, it comes up as
XIServer\Outbound\xyz. Is this expected behaviour?
I was expecting just the file name<xyz> to be retrieved.
Thanks,
Anand

HI,
Create an UDF and write this code.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
in Adapter u will have Adapter specific parameters check the file name check box.
Using this UDF u will get the file name at target side.
Regards,
Phani.

Errro when referring a Bean in Sender file adapter

Hi
I have created a sample code and deployed in the server and when i refer that in the sender file adapter module processor using the naming format
localejbs/sap.com/com.vas.mod/GetFileNameBean
where
com.vas.mod is the EAR Project name
GetFileNameBean is the Bean name
I am getting the erro in the XI Adaptor monitor as follows
<b>- 2006-07-31 13:06:51 UTC: Error: NameNotFoundException: Path to object does not exist at com.vas.mod, the whole lookup name is localejbs/sap.com/com.vas.mod/GetFileName.</b>
I checked theJNDI name in the server it is exactly the same.
can some one help me on this please?
vasagam R K

Hi Vasagam,
Please check these threads..
They deal with ur question...
NameNotFoundException during JNDI lookup for Deployable WebService Proxy
Strange Lookup Error (SAP Resource Adapter)
cheers,
Prashanth
P.S Please mark helpful answers

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Strange Behaviour of Sender file CC

Similar Messages

Maybe you are looking for