Strange behaviour of the bios (setup)

Hi.
I have 2 issues:
1) When i using USB keyboard and I enter to the BIOS (setup) the response of the program is very slow, i need to wait couple of seconds before the program will respond on my keyboard press. In Win XP is working well.
2) My memory Mushkin 2gb (2x1gb) hp2-6400 with epp (2.1v 4-4-4-12) is inappropriate recognized - somehow the EPP is not chosen automatically but the adjusted memory clock field is indicating 1066 instead off 800 (in the Windows i see only 800).
Here full spec of the computer:
1) MSI P45 Platinum, BIOS v1.6
2) Intel E8200 CPU
3) DDR2-800 Mushkin HP2-6400 with EPP 2.1V 4-4-4-12
4) WD 320GB SATA2 Hard Drive
5) NVIDIA 8600GT 512MB Graphics Card
6) Windows XP SP3 Professional
7) Thermaltake 400Watt Power Suply
Thank You.
Thank You and Best Regards.

Hi,
please provide full system specs. Read the >>Posting Guide<< to get an idea of what details you should provide. Thanks.

Similar Messages

Toshiba P875 S7102 How To Enter The Bios Setup

I have been tring everything to get to the bios screen of the computer. I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked. I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it. Nothing has worked, it just continues to boot to windows 8.
I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
Thanks.

The "secret" is what you do when shutting down before attempting to access the BIOS. Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

The strange behaviour of the notification

Coherence 3.3.1/389
     .Net API 3.3.1.2
     I have C++ GUI client with grid. It shows in the grid all updates from Coherence.
     I have also the 'server' application, which inserts objects into Coherence (1 - 2 per second).
     I use 'near-scheme' with front set to local-scheme and back set to remote-cache-scheme.
     I have 3 GUI clients connected to the Coherence and i have the strange behaviour of the clients. The insert comes to one of them three times instead of one. I've checked in the debugger and it's true. The insert really comes three times. But when i've restarted the client all became to work fine.
     It's bad that i can't repeat this situation, it happens from time to time.
     Does anybody get the same situation?
     I've masked it by the checking key and version of object, but it's really strangely.
     Thanks.

I think it's depended on the situation described in thread CacheEventFilter: Where does the filter part apply?
     Many thanks.

Sooo... How do I get into the bios setup?

Now before you get out the pitchforks and torches, I know I'm supposed to continually press or hold a certain Function key when I first power on a computer.
My cousin left me his old Pavilion a410e. I figured I'd set it up for when family or friends needed to use a computer. Well... when I got everything together and started it up, I got an error. "CPU Fan Failure". (Now you see why my cousin gave the computer to me.) I popped open the case and saw the fan spin up fine when powering the computer. The fan's power connecter and the heatsink/fan are all properly in place. I tried to google for a solution, and came across suggestions to turn off the fan check through bios. The computer came into my hands with the 3.06 bios, and while in that bios menu, the cpu fan options were greyed out (unchangeable). I thought maybe a bios update would change that, so I went ahead and downloaded/installed the 3.10 bios update from HP. It installed fine (I guess), but now I can't get into the bios menu, no matter which key I press. Windows boots up fine, so long as I bypass the CPU fan failure warning by pressing F2. I'd really like to kill that warning. How do I get into the bios menu now, guys?

ComputerzEast wrote:
You may be able to go back to an older bios revision. . . some computers let you and others do not. I don't have experience with this particular model to know for sure.
I wouldn't mind trying. I'm not sure where I'd find older bios updates, tho. HP doesn't seem to archive their bioses on the site.
20YearsHPUser wrote:
In windows, what bios version does it report? -- you said you were able to boot into windows.
I'm...not sure what you mean, but if you're asking me which bios version I have installed currently, it's: 3.10. For Pavilion a410e.
nazcar4u wrote:
Ihis may sound stuipid but have u tried hitting the ESC key to enter BIOS?
ESC takes me to the "Boot Menu", which works, oddly... The boot screen says to press F1 to get into the bios setup, but it just won't work.

Strange behaviour of the forum website

Since yesterday I observe a strange behaviour of the forum website:
There is a thread by Foto-Gabriela called "LR 3.4 crashes after some hours of work with very strange behaviour"
When I select "All threads" I cannot see this thread, but when I select "Open questions", it is visible.
It says that there are 6 answers. When I click on the thread, it comes up with only 3 answers visible.
What's going on, here?
WW

function(){return A.apply(null,[this].concat($A(arguments)))}
When I select "All threads" I cannot see this thread, but when I select "Open questions", it is visible.
It says that there are 6 answers. When I click on the thread, it comes up with only 3 answers visible.
This behavior, with posts appearing and disappearing, has been occurring for a few weeks, and is just one of many symptoms of the poor forum service provided to Adobe by Jive. You can keep abreast of such forum issues at the Forum Comments forum:
http://forums.adobe.com/community/general/forum_comments

Satellite 1400-103: Cannot access the BIOS Setup

I'm having problems getting into the BIOS setup. At the 1st bootup screen I press ESC key then message appears Check system. Then press F1 key. Once key is pressed it doesn't take me to BIOS setup and laptop reboots. Any help will be much appreciated.
James

No it doesn't. There is a problem with the OS and I was gonna do a repair using an XP disk. I have been trying to boot from cd rom by pressing C button and I've also tried pressing F12 key to change boot device. The teacher whose laptop it is has put a bios password on bootup but I'm assuming this shouldn't affect bootup or accessing the bios setup. I'm not sure if it's a supervisor password or administrator password.

Z87-G43, can't enter the BIOS Setup, system is not running

Hi everyone,
I was working with my pc for about 2 months. Since the very first day i had few problems with mobo but now i can't even run the system and enter the bios. First of all, i had problem with running the system after disabled the MSI logo. I had to enebled it again, because it was the only way to turn on PC (bios stopped at the screen with black screen and a2 code) but it was about 1 month ago. I also remember that from the very beginning option "Hardware Monitor" wasn't working, i mean bios was freezing too and i had to restart PC. Furthermore i have noticed that after choosing language to Polish, few more options in "Settings" appeared, but after switching language back to english they were gone. Unfortunately i can't say now, which one it was because now i got the biggest problem...
BIOS is not running at all. I mean, it all stops with A2 code in right bottom corner of the screen. I can't even enter the bios setup. It shows "Setup is preparing to start" or something like that, but it doesn't run... Can't do nothing atm. BIOS version was the latest - 1.6 . It all started to happening when i had entered to option in bios with disabling or enabling MSI logo, i didn't choose nothing, it freezed, i have resterted PC, and now i nothing is running... Btw sometimes, i coudn't run the system and bios was freezeing also, if my TL-WN722N wasn't connected to USB port in front case's panel. But now, whenever Tp-LINK is connected or not, it's not running...
CPU: i5 4440
GPU: R9 270x
SSD: Plextor 2,5' 128GB, SATA III ( 520/200MB/s ), 9,5mm (PX-128M5S)
Power Supply: XFX Pro Series 550W PSU 120mm 80+ (P1-550S-XXB9)
RAM: Kingston HyperX 2x4GB 1600MHz DDR3 Non-ECC CL9 Intel XMP X2 Grey Series (KHX1600C9D3X2K2/8GX)

Quote from: badboy2k on 04-January-14, 18:37:20
A2 is IDE detect <--- that is a HDD/SSD problem or its cable (try a different one)
if the above doesn't work try to foll0w >>Clear CMOS Guide<< do that to reset the BIOS to defaults with power cord removed from your PSU!
after performing the above steps make sure you enter BIOS and reset the SATA mode (AHCI/IDE/RAID to what you installed your os at) and boot order to your SSD first!
Ye that's the reason, I have a new brand 1tb sata 3 where I installed the windows, but the old 320gb sata 2 is causing the same error, so I have to remove the cables from the sata 2 hdd, than the pc boots ok. I shutdown & reatach the old drive & evrething works untill the PC enters stand by again.

I'm using MS-5136& I forgot my password in the BIOS setup

I'm using MS-5136 & I forgot my password in the BIOS setup
What can I do ?
I've lost the manual
The web site shows only chapter 2 of the manual
I cannot find any batteries to remove to reset the bios
Is there a way of shorting a jumper or ???
Any help is appreciated
TIA
[email protected] ?( ?(

There is a JRTC by the bios and RTC chips. Try that.

Strange behaviour of the rangeSize - or is it desired?

Hi there,
as recently asked in Difference between VO Fetch Size, Iterator rangeSize and af:table Fetch Siz we have a problem with the rangeSize property of the iterator binding.
First of all, we're currently working wit JDev version 11.1.2.2.0. So, we have a page with a table. In this table is nested inside a panel collection which is nested inside a panel stretch layout. To cut a long story short, it stretches.
The rangeSize is now set to the default 25, but you could see in the fullscreen usage about 35 rows. When we now select a row which is in the rage of the first 25 records and use the data in such a method:
RichTable table = this.getTable();
RowKeySet rowKeySet = table.getSelectedRowKeys();
Iterator selectetNodesIterator = rowKeySet.iterator();
CollectionModel treeModel = (CollectionModel)table.getValue();
JUCtrlHierBinding treeBinding = (JUCtrlHierBinding)treeModel.getWrappedData();
while (selectetNodesIterator.hasNext()) {
List selectedRowKeyPath = (List)selectetNodesIterator.next();
JUCtrlHierNodeBinding nodeBinding = treeBinding.findNodeByKeyPath(selectedRowKeyPath);
Row row = nodeBinding.getRow();
DBSequence aaId = (DBSequence)row.getAttribute("AaId");
}We got a NPE at Row row = nodeBinding.getRow();, because the nodeBinding is null. Only the last fetched records have a JUCtrlHierNodeBinding.
So yeah ok, for testing purposes we changed the rangeSize to 1, just to see what happens. And again it fetches one row after another as long is the tables current view is full. And if we try it again every record results in a NPE excpet the very last visible record. So far so good, after what we've seen with 25 records this was expected.
When we change the rangeSize to a value greater than 36 (the visible rows, in that current fullscreen resolution) it works as it should.
So, to see if there is a bug i decided to create a small testapp with the HR schema. I've just dropped the employees vo as a table inside a panel collection which is nested inside a panle stretch layout. And used nearly the same method:
public String onButtonClicked() {
RowKeySet rks = table.getSelectedRowKeys();
CollectionModel tablemodel = (CollectionModel)table.getValue();
JUCtrlHierBinding binding = (JUCtrlHierBinding)tablemodel.getWrappedData();
Iterator it = rks.iterator();
while(it.hasNext()){
    List selectedRowKeyPath = (List)it.next();
    JUCtrlHierNodeBinding node = binding.findNodeByKeyPath(selectedRowKeyPath);
    Row row = node.getRow();
    System.out.println("Testausgabe: " + row.getAttribute(1));
return null;
}When the rangeSize is now set to 1 every visible row except the last also result in a NPE. If we run that above code on a button click, but now the strange part. When the rangeSize is changed to a value greater 1 it works like a charm. You can run that code with every visible record an you get now NPE. Also very strange with a rangeSize = 1, when you select the last visible record which is working and run the code, then select a record above, which had thrown an NPE previously and run the code. It is working, but with the value of the last visible record.
This leads us to a bunch of questions.
1) Is it the supposed way to work, that you get a NPE when the rangeSize is set to a smaller number than visible rows?
2) If 1) is the desired way, how do you handle the rangeSize for a table which is stretched? You couldn't now how many rows you could see.
3) Does anyone have an idea how to explain the last explained behaviour with the testapp? (I could upload it)
Thanks in advance.
Alex

Hi Alex,
can you open a SR at Oracle support for this issue?
I know there are several bugs which are somehow related with the rangeSize and the synchronization of the model (currrent row) and the view (in this case the visible part of af:table).
See also Restore current row after rollback does not work with page ranging
As far I know Oracle plans some enhancements in this area to fix the syncronize problems and change e.g. the rangeSize dynamically depending on the number of rows visible in the GUI.
But anyway your issue sounds like a new bug.
regards
Peter

Where is the BIOS setup? - Satellite Pro 490XCDT

my wife has a pre-historic notebook 490XCDT and yesterday she came home with a brand new WLAN card
>> please, best husband of the world, install this <<
she said, and now its me who struggels for hours with this sh...notebook :/
it might help if I could get into BIOS settings, but when I press ESC during power on, this model just say:
>> check system and press F1 <<
If I do so, the "system" boots (WIN98) and no BIOS setup is available
what can I do? (exept recycling, devorce, etc...)
Jake

Hi
I agree with you. This unit is pretty old.
Are you sure that your wireless LAN card is compatible with your unit?
Which card did you use? minPCI or PCMCIA WLan?
You have suggested that your unit is preinstalled with Win 98 OS. Well, Im sure that you need also a right driver.
As far as I know the ESC is a right button to enter the BIOS but check other possibilities; F2 or F12.

Strange behaviour in the text resources on the km

Hi, we have got a strange problem here..
when we try to retrieve the content of a text resource from the km by code, we often get the content, but with this 3 characters at the beginning: "ï»¿"
Does anybody knows why?
thanks to everybody...

http://en.wikipedia.org/wiki/Byte_Order_Mark

Anyone else experiencing strange behaviour using the App Store/iTunes

I'm having a strange problem with both iTunes and the App Store apps. Searching for items is hit or miss, sometimes no results are returned or tiles are missing their pics etc. Clicking on a item of interest like a TV show, for example, brings up the details page but sometimes the individual episodes descriptions/pics won't load.
The first time I used the new App Store it was showing me GBP currency instead of CDN. I checked my settings and my location was set as Canada, so it definitely wasn't a settings issue on my end. Killing the app and going back in seemed to fix the problem.
I was just browsing some new games when I ran into another problem, prompting me to post here. I clicked on a game's icon/tile to access the details page, but nothing happened. Clicked it again thinking it was me and this time the tile showed as depressed but nothing happened. Clicked another tile and it depressed as well (and the first tile stayed in that state too) but the details page didn't load.
I definitely think there are a few bugs in the new App Store/iTunes apps. Very annoying as there are a few purchases that I'd like to make but can't. Argh.
This all started after upgrading to iOS 6, which has otherwise been fine so far.
Anyone else having similar problems?

YES! I am having a lot of AppStore problems since iOS 6. My 2 main issues are:
1. AppStore crashes constantly or will just sit & spin then does nothing at all.
2. If I search for a specific App, making sure my spelling is correct, AppStore will NOT bring the app up. Instead, it will bring up unrelated apps.
Podcasts app does the same thing, as well as jumbling up dates. Very impossible to find the correct episode.
APPLE, please tell me you are reading this and that a fix is quickly under way!!

Strange behaviour of the web UI

Hi,
I have encountered something weird when i used the web UI of Oracle 10g Express.
I have a table with one of fields defined as Blob type and this table contains a record with data in the blob field.
I used a Java application (created by myself) and standard Java's record fetching methodology to get the record from that table and everything works fine. The key point here is that i am able to retrieve the blob data from the DB.
However, when i used the web UI to update a particular field in that table (e.g. changed a value), i could no longer retrieve the blob data using the Java application. It returned a null instead and moreover, the web UI still indicates that there was value in the blob field.
I am wondering if anyone else has encountered this problem. Is it a bug?

when i used the web UI to update a particular field in that table (e.g. changed a
value), i could no longer retrieve the blob data using the Java application. It
returned a null instead and moreover, the web UI still indicates that
there was value in the blob field.Post exactly how you update that table.

Strange behaviour of the Energy Saver settings

I noticed that the two sliders in the Energy Saver settings seem to work in tandem. If I set the Display to "Never shutdown" (I used this as I don't want my display/TV to go off in the middle of a movie as the mac sees there are no user interactions), and then try to adjust the sleep timer to anything (15min, 30min, etc.), it aligns the slider for the Display at the same point!
Is it happening only on my mac or is it the way it works for others?

That would be the simple logic. But, the scenario I mentioned is also a logical one. I have noticed that when I am watching a long Youtube video or an online movie from sites like Jaman, the screen would go off even though the system access is alive. At that time I have to scramble to the mouse/kbd to reactivate the display.
At the same time, I want to put the mini to sleep after 30min of inactivity. Hence, I want to set the sleep timer to 30min and the display to "never".
The energy saver settings show two separate sliders and there is no indication that they are attached at the hips.
Since it works this way for you as well, then I am not doing something weird. I think this is a bug in the OS.

Strange behaviour using the "Save Region(s) As..."

I'm encountering some apparently repeatable oddities when using the "Save Region(s) As..." command.
I take one long track, snip it up into smaller regions (say, 20) and then in the Audio Window menu, select all the regions and use "Save Region(s) As..." from the Audio File menu.
What happens is that the FIRST time I try this Logic only saves EVERY FOURTH REGION as a new audio file, ie if I had 20 regions selected I'll only get 5 new audio files!
If I select all the regions and try it again, Logic now saves all the regions correctly and in order.
(File conversion settings all are set to "Preserve Original" "No Change".)
Anyone else?
12 PB 1.33Mhz, 1.25GB RAM Mac OS X (10.4.7)

correction:
this only happens when i delete the first region, then save the remainder. to clarify:
load audio file. there's one region showing, which consists of the entire audio file. go make 16 new regions, so you've got 17 total. delete the first one, which is the full length of the file. now you've got 16. select all 16 by click-dragging down the side of the audio window so all 16 are selected. "save regions as..." saves only regions 2-16.
when i don't do that initial delete of the full-length region, all regions are saved properly.

Strange behaviour of the bios (setup)

Similar Messages

Maybe you are looking for