Strange behaviour of weblogic 6.1 while delivering charts

Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, so I
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write the right
file. But that's too late because my script tries immediatly after the OK to
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

You should post on interest.webserver, but 200 OK is standard http response.
Don't confuse the headers with the content. I would expect that any other
simple http server functions in the same manner.
cheers
mbg
"Martin Haberstroh" <[email protected]> wrote in message
news:[email protected]..
Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, soI
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write theright
file. But that's too late because my script tries immediatly after the OKto
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

Similar Messages

LR 1.3.1 strange behaviour: L key adds keywords and removes pictures from collection

After updating to LR 1.3.1 yesterday I found a very strange behaviour that I cannot explain: While in the Library module and looking at a picture from a collection (in loupe mode) I cycle through the different light modes using the L key. Then suddenly (after several hits of the L key) a keyword is added (not always the same keyword) and at the same time an unknown number of pictures is removed from the collection. The keyword is not added to the picture I was currently viewing, but to another one from the same collection. This has not happened before and I have no idea what is going on. I can restore the collection by relaunching an older catalog but of course this does not solve the problem. Can anybody help?
(PC, Win XP prof SP 2, 4 Gig RAM)

It is possible that instead of hitting the l key, or perhaps within the same sequence of hits your are in fact accidentally hitting the k key.
K is the shortcut for "Add shortcut keyword"
Of course you would have had to set that particular keyword at some point and it does not explain the different keywords being assigned.
Unless the alt key was involved somehow and you were rating the images with 1-9 numbers. That would account for different keywords being assigned and would seem arbitrary.
To check: look at one or two of the images that you may have rated using a number key and then look at the keyword set the keyword came from. Press the alt key and a number from 1-9 will appear next to the keyword. If they match then thats the answer.
If you weren't rating the images this way then.....??
Perhaps there is a fault with the keyboard itself rather than the program.
David

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
          String result = "";
          try {
               // Execute a command
               Process child = Runtime.getRuntime().exec(command);
               // Read from an input stream
               InputStream in = child.getInputStream();
               int c;
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
               in = child.getErrorStream();
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
          } catch (IOException e) {
          return result;
     }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
          String line;
          String result = "";
          OutputStream stdin = null;
          InputStream stderr = null;
          InputStream stdout = null;
          // launch EXE and grab stdin/stdout and stderr
          try {
               Process process;
               process = Runtime.getRuntime().exec("cmd.exe");
               stdin = process.getOutputStream();
               stderr = process.getErrorStream();
               stdout = process.getInputStream();
               // "write" the parms into stdin
               for (int i = 0; i < commands.length; i++) {
                    line = commands[i] + "\n";
                    stdin.write(line.getBytes());
                    stdin.flush();
               stdin.close();
               // clean up if any output in stdout
               BufferedReader brCleanUp = new BufferedReader(
                         new InputStreamReader(stdout));
               while ((line = brCleanUp.readLine()) != null) {
                    result += line + "\n";
               brCleanUp.close();
               // clean up if any output in stderr
               brCleanUp = new BufferedReader(new InputStreamReader(stderr));
               while ((line = brCleanUp.readLine()) != null) {
                    result += "ERR: " + line + "\n";
               brCleanUp.close();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return result;
     }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?

Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support

IPhoto: strange behaviour with preview thumbnails

Is there a simple way in iPhoto 8 to rebuild the thumbnail database?
I recently noticed a strange behaviour iPhoto 8 has with previews: In some of my event categories, iPhoto does not display the correct preview thumbnail of the picture, but a preview thumbnail of another event. When I click on the thumbnail, it reloads the appropriate preview and it does not happen again - with that picture. Also, if I double click an event to open it, the small thumbnail of the event's key photo that is to be displayed in the title bar (next to the All Events button) is not always correct.
Thank you for your help!
Stefan

I have similar problems (lately) with iPhoto 6.0.6 -- thumbnails do not equal the images they 'thumbnail' of.
Sometimes when it opens, it (recently) asked me to rebuild the thumbnails, but not always.
Can I force a thumbnail rebuild using the command you gave - Apple-option while opening iPhoto? In iPhoto 6.0.6 this primarily forces a new selection of a library.

Nokia C3-01 -strange behaviour/ problems with Noki...

When I was choosing my new mobile, I had two options : Samsung Wave 533 and Nokia C3-01. After a lot of hesitance I decided to pick up Nokia, believing to its high quality despite its poor media potential. However, now I think that it was a bad idea.
      Firstly, I have never thought that Touch and Type won't have ability to adjust brightness of the screen (AWFUL IN THE NIGHT), set up more then one alarm and use many of JAVA applications. When I tried to install some applications, it said- out of memory. Out of memory?! My old SE K770i could much more! What annoys me the most is that I can't use my e-mail account via Nokia Mail. When I press the icon of it , there is an error Null pointer exception and applications shuts. Other strange behaviour- while I was typing sms , suddenly there was hard, long vibration, screen went white and mobile restarted. Other users of C3-01, check this: go to messages, then other messages , then direct , start typing and try to go back to menu- screen turns white, mobile restarts (I'm polish , so names may be a little bit different) . How on earth, can mobile restart so often?.
    , Secondly,the funniest one- Ovi shop. Important thing in every Nokia. Guess what- I can't use it! When I to launch the apllication and try to go to the shop, there is information that it's not avaible for my phone. I used it a week ago and worked properly.
      All in all, I hope that Nokia will share an update of software to this model. I am just so disappointed. What I am sure about that next mobile will not be from finnish enterprise.
Solved!
Go to Solution.

Sorry Brother, Your Device is totally misfunctioned and FAULTY, You Need to go back to Nokia Care Centre and GET IT REPLACED.
Your Device is faulty.
Please Dont Blame Nokia Or the C3-01 Device Because both are QUALITY PRODUCTS.
I have C3-01 Since 4 Months Now and I havent Had a Single Complain about my device even though I am a Rough Handler and Using the Mobile Upto its Extend.
You Have 2 options, Try To Fix your Device at Home By :
Soft reset your Nokia C3-01 Touch and Type you need to press *#7780# and then Dial. The security code is 12345. Once you complete this, your phone will come back to factory settings, but you will not loose personal data. Anyway it is recommended to make a backup before performing any of the mentioned procedures.
To hard reset your Nokia C3-01 Touch and Type you just have to press *#7370# and press Dial. The phone will request the security code that is by default 12345. Please be aware that you will loose all the data in your phone, so you should backup all relevant information.
If Problem still persist then Connect to PC Suite/Ovi Suite and Reinstall the Firmware.
BUT U NEED YOUR DEVICE TO BE UPDATED TO ITS LATEST FIRMWARE = v06.05
If still not fixed then, REPLACE YOUR DEVICE ASAP, because as given by Nokia, C3-01 Device Works according to its Specification as Specified.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Strange Behaviour after 6.0.2 install

Hello all,
This is my first posting to Apple Discussions, so please be kind...
I recently installed iTunes 6.0.2 via Software Update and noticed strange behaviour while trying to edit a smart playlist. I have a smart playlist set up to select songs between 3 and 5 stars in My Rating, which have not been played in the last four weeks. While trying to edit the star range, I found that I could only select two stars or five stars. If I clicked one star, it changed to two; if I clicked any other number of stars, it changed to five. As a test, I restored the previous iTunes.app from backup and the problem disappeared.
Anyone have any ideas what might be causing this?
Thanks,
Jon

Hello Web_Diko,
I'm sorry but I don't know where you can find that package. I take nightly backups of my machine so I just restored the previous version from my backup. Maybe try a search for "iTunes 6.0.1" on Google or on www.apple.com?
When I mentioned the "privacy thing" I was alluding to the various items about iTunes 6.0.3 "phoning home" with details of what tracks you are playing together with your Apple ID. It doesn't bother me personally, but I think that the complaints are legitimate, because people should be told whenever they install a program that sends information back to the vendor.
Jon

Strange behaviour on reading procfs

Hello,
I have a strange behaviour reading process table from procfs. Some processes have a resident size and image size of 0 (zero). So I wrote a little test program and generated a 32bit binary. It gave me the same result. After I made a 64bit binary and this brought the expected results. Do anyone of you have an idea what i'm making wrong. Below you can find an output example and the code of the program.
Every answer is appreciated
erinda
pfs.s32pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 0 0
24151 oracle 11 0.00 7.01 0 0
pfs.s64pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 9352 3440
24151 oracle 11 0.00 7.01 330240 286664
and here the program
int main(int ac, char * av[])
struct dirent * procEntry;
char prcPath[PRARGSZ];
psinfo_t prcInfo;
pid_t pid;
int rtc;
DIR * procDir = opendir("/proc");
if(procDir == NULL)
printf("opendir(/proc) failed\n");
return 1;
printf(" pid name nlwp %%cpu %%mem image resident\n");
printf("----------------------------------------------------------\n");
rewinddir(procDir);
while(procEntry = readdir(procDir))
if(procEntry->d_name[0] == '.' || // skip "." and ".."
procEntry->d_name[0] == '\0') // skip empty name
continue;
pid = atoi(procEntry->d_name);
if(pid == 0 || pid == 2 || pid == 3)
continue;
size_t size = sizeof(psinfo_t);
sprintf (prcPath, "/proc/%s/psinfo", procEntry->d_name);
int pprocfs = open(prcPath, O_RDONLY);
if (pprocfs < 0)
return 2;
else
ssize_t bytesRead = read(pprocfs, &prcInfo, size);
if (bytesRead != size)
return 3;
close (pprocfs);
printf(" %5d %-15s %4d %5.2f %5.2f %8lu %8lu\n",
prcInfo.pr_pid,
prcInfo.pr_fname,
prcInfo.pr_nlwp,
(float)(100.0 * prcInfo.pr_pctcpu / 0x8000),
(float)(100.0 * prcInfo.pr_pctmem / 0x8000),
(ulong_t)prcInfo.pr_size,
(ulong_t)prcInfo.pr_rssize);
}

Hello.
If a 32 bit process reads from /proc different structures are returned as if a 64 bit process reads the same files.
In the OpenSolaris sources this can be seen in http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/fs/proc/prvnops.c#2600 (line 2600).
Unfortunately a 32 bit task cannot get all information about a 64 bit task - at least not in current Solaris version. I think this is a problem to be solved by Sun...
Martin
If anyone from Sun involved in the development of the procfs reads this: My proposal is:
/proc/xxx/psinfo32 and psinfo64 and a symlink psinfo. The symlink's destination depends on the reading processes data model....
(The same should be done with all files (lwpinfo...) in /proc).
Another idea is a special IOCTL that controls if a 32 bit task wants to access the 64 bit structures...

Strange behaviour of jdbc-mysql driver

I am trying to store japanese characters in mysql and display also after reading from the database using JSP. I am using the following code.
<%@ page contentType="text/html; charset=UTF-8"%>
....... some code ......
<%
Class.forName( "org.gjt.mm.mysql.Driver" );
Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/DB?useUnicode=true&characterEncoding=UTF-8", "user", "pass" );
Statement st = con.createStatement();
st.executeUpdate( "insert into test values('" + request.getParameter( "imgname" ) + "')" );
ResultSet rs = st.executeQuery( "select * from test" );
while( rs.next() ) {
%> DB Value: <%= rs.getString( "imgname" ) %>
<% } %>
I found one strange behaviour. I have to change the DriverManger.getConnection line to the following, to write the data correctly in the database.
DriverManager.getConnection("jdbc:mysql://localhost:3306/DB","user","pass")
If I read from the database using the same parameters as above, I am getting garbled data.
To retrieve the data correctly from the database I have to use the following line instead of the previous one.
DriverManager.getConnection("jdbc:mysql://localhost:3306/DB?useUnicode=true&characterEncoding=UTF-8", "user", "pass" );
In short, I have to pass different parameters to DriverManager.getConnection() for writing and reading from the database. But it is not possible practically. I am using mm.mysql-2.0.8 jdbc-mysql driver, mysql is 3.23.47 and english windows 2000.
I have tried the string.getBytes("UTF-8") and new String( getBytes(string), "UTF-8") methods, but not getting the correct data.
Can anybody guide me how can I store and display the japanese character correctly?
Thanks to all,
gaurang.

I downloaded the latese driver from sourceforge, but still the same thing is happening. Is there any other thing which I should do?
Thanks
gaurang.

Strange behaviour whit custom JTextField and JToolTip

Hello everyone. I hope I'm writing in the right section and sorry if I did not search for this issue but I really don't know which keywords I should use.
I'm using NetBeans 6.1 on WinXP and JDK 1.6.0_07, I have a custom JTextField with regex validation: when you type something that don't mach regex it shows a JToolTip. This JToolTip should disappear when the text typed is finally correct, or when the textfield loses focus (see code below).
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Point;
import javax.swing.JToolTip;
import javax.swing.Popup;
import javax.swing.PopupFactory;
public class MyJTextField extends javax.swing.JTextField implements FormComponent
private static Popup popUpToolTip;
private static PopupFactory popUpFactory = PopupFactory.getSharedInstance();
private boolean isValidated = false;
private String regEx = "a regex";
public MyJTextField()
this.addKeyListener(new java.awt.event.KeyAdapter()
public void keyReleased(java.awt.event.KeyEvent evt)
if(evt.getKeyCode()!=java.awt.event.KeyEvent.VK_ENTER)
validateComponent();
else if(evt.getKeyCode()==java.awt.event.KeyEvent.VK_ENTER)
if(isValidated)
((Component)evt.getSource()).transferFocus();
this.addFocusListener(new java.awt.event.FocusAdapter()
public void focusLost(java.awt.event.FocusEvent evt)
if(popUpToolTip!=null){popUpToolTip.hide();}
public void validateComponent()
if(text.matches(regex))
isValidated = true;
if(popUpToolTip!=null){popUpToolTip.hide();}
else
isValidated = false;
if(popUpToolTip!=null){popUpToolTip.hide();}
String error = "C'è un errore nella validazione di questo campo";
JToolTip toolTip = createToolTip();
toolTip.setTipText(error);
popUpToolTip = null;
popUpToolTip = popUpFactory.getPopup(
this,
toolTip,
getLocationOnScreen().x,
getLocationOnScreen().y - this.getPreferredSize().height -1
popUpToolTip.show();
}(I've cut it a bit, here's only the lines that involve JToolTip use)
I have many of them in a form, and when the first tooltip appears (on the first textfield I type in) it never disappears, while nex textfields work just fine.It seems the first tooltip appearing can't be overwritten or something similar. If I use this same component on any other NetBeans project, everithing works without issues.
I have some other custom components working the same way (JComboBox, JXDatePicker), and they had this "not disappearing tooltip" issue since I changed this
popUpToolTip = popUpFactory.getPopup(this, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
whit this
popUpToolTip = popUpFactory.getPopup(null, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
but if I try it on the JTextField all textfield's tooltips stay stuck there, not only the first one appeared (while other components still works fine).
This thing is really driving me crazy. Someone has an hint (or a link to another thread) which could explain this strange behaviour?
Thanks in advance.

BoBear2681 wrote:
Note that an SSCCE wouldn't require you to post any proprietary code.Hmmm... well, I'll try again to reproduce the issue and post an SSCCE.
BoBear2681 wrote:
That probably indicates that the problem is somewhere other than where you're currently looking.Yes, I suppose so. Maybe it's some interference between all the custom components I created, or maybe something else that apparently doesn't conern at all. If I cannot reproduce it in an SSCCE and I'll figure out what's the cause of this mess I'll post it here for future knowledge.
Many thanks for your advices. :)

A strange behaviour throwing Threads via anonymous class technique

Hi friends!
I've noted a strange behaviour executing the next code:
public class ResolAnonimes
     private int value;
     public ResolAnonimes(int value)
          this.value = value;
     public ResolAnonimes myMethod(int nThreads)
          final ResolAnonimes a = this;
          int nThreadsFor = nThreads - 1;
          for( int i=0; i < nThreadsFor; i++)
               new Thread(){
                    public void run()
                            System.out.println(Thread.currentThread().getName() + " has begun processing");
                                 doSomethingWith(a);
                            System.out.println(Thread.currentThread().getName() + " has finished processing");
               }.start();
               this.value++;
          }//for loop
          return a;
     public static void doSomethingWith(ResolAnonimes a)
          System.out.println(a.value);
     public static void main(String Args[])
          ResolAnonimes first = new ResolAnonimes(1);
          ResolAnonimes result = first.myMethod(5);
}When I execute it, that's the output I get:
Thread-0 has begun processing
2
Thread-0 has finished processing
Thread-0 has begun processing
3
Thread-0 has finished processing
Thread-0 has begun processing
4
Thread-0 has finished processing
Thread-0 has begun processing
5
Thread-0 has finished processingWhere's the "1" printed? It doesn't appear! It seems it has thrown only 4 threads, not 5.
Am I doing anything wrong? Is it a bug?
Can you help me, please?
Thank you in advance.

Oh I'm sorry. I was changing the code because of privacy rerasons and I finally didn't type what I want.
Consider an array which all cells must be typed with the array lentgh. Moreover, the work is distributed by some threads.
I'm refering to something like this:
import java.util.Random;
import java.util.LinkedList;
public class MyArray
     private static int initialRow = 0;
     private static int lastRow = 0;
     private int[] vector;
     public MyArray(int size)
          vector = new int[size];
     public static boolean correctIndex(MyArray a )
          for(int i = 0; i< a.vector.length; i++)
               if(a.vector[i] != a.vector.length)
                    return false;
          return true;
     public String toString()
          String s ="";
          for(int i=0; i < this.vector.length; i++)
               s += this.vector[i] + " ";
          return s;
     public MyArray operationWith(int nThreads)
          MyArray a = this;
          MyArray result = null;
          final Contenidor ctros = new Contenidor(new LinkedList());
          result = a.putTheIndexValue(nThreads, ctros);
          Thread consumerThread = new Thread( new Consumer( ctros, nThreads));
          consumerThread.start();
          try
               consumerThread.join();
          catch(InterruptedException ie){}
          return result;
     public MyArray putTheIndexValue(int nThreads, Contenidor ctros) //Este metode encara es experimental
          final MyArray a = this;
          final MyArray result = new MyArray( a.vector.length);
          final Contenidor ctrosR = ctros;
          for(int i = 0; i < result.vector.length; i++)
                    result.vector= 0;
          int incRows = a.vector.length / nThreads - 1;
          initialRow = 0;
          lastRow= incRows;
          int nFilsFor = nThreads - 1;
          Thread[] vectorFils = new Thread[nThreads];
          for( int i=0; i < nFilsFor; i++)
               /*vectorFils[i] = */ new Thread()
                                             public void run()
                                                  System.out.println(Thread.currentThread().getName() + " has begun processing");
                                                  MyArray.putTheIndexValue( a, initialRow, lastRow);
                                                  System.out.println(Thread.currentThread().getName() + " has finished processing");
                                                  String s = Thread.currentThread().getName();
                                                  ctrosR.put(s);
               vectorFils[i]*/.start();
               initialRow = initialRow + 1;
               lastRow = initialRow + incRows;
          new Thread()
               public void run()
                    System.out.println(Thread.currentThread().getName() + " has begun processing");
                    MyArray.putTheIndexValue( a, initialRow, a.vector.length - 1);
                    System.out.println(Thread.currentThread().getName() + " has finished processing");
                    String s = Thread.currentThread().getName();
                    ctrosR.put(s);
               vectorFils[i]*/.start();
          return result;
     public static void putTheIndexValue( MyArray a, int initialRow, int lastRow)
          for(int i = initialRow; i <= lastRow; i++)
               a.vector[i] = a.vector.length;
public class Interface
     public static void main(String Args[])
          int nThreads = 2;
          int arraySize = 5;
          MyArray ma = new MyArray(arraySize);
          MyArray result = ma.operationWith(nThreads);
          if(MyArray.correctIndex(result))
               System.out.println("The operation has been done correctly");
          else
               System.out.println("THE OPERATION HAS NOT BEEN CORRECTLY!");
          System.out.println(ma.toString());
public class Consumer implements Runnable
     private Contenidor ctros;
     private int nFils;
     public Consumer(Contenidor ctros, int nFils)
          this.ctros = ctros;
          this.nFils = nFils;
     public void run()
          System.out.println(Thread.currentThread().getName() + "is waiting the total process to be finished");
          for(int i = 0; i< nFils; i++)
                  System.out.println( Thread.currentThread() + " is waiting a thread to give me its chunk");
                  String s = ctros.get();
                  System.out.println( Thread.currentThread() + ": " + s + " has already given me its chunk");
             System.out.println(Thread.currentThread().getName() + "says all threads have finished");
import java.util.Queue;
import java.util.LinkedList;
public class Contenidor
    private int nDadesNoves;
    private Queue contenidor;
    public Contenidor(Queue contenidor)
        this.contenidor = contenidor;
        this.nDadesNoves = 0;
    public synchronized String get()
        while(nDadesNoves < 1)
            try
                wait();
            catch(InterruptedException ie){}
        nDadesNoves--;
        notifyAll();
        return (String)contenidor.poll();
    public synchronized void put(String s)
        contenidor.offer(s);
        nDadesNoves++;
        notifyAll();
}The output I get sometimes is:
THE OPERATION HAS NOT BEEN CORRECTLY!
5 5 5 5 5And I get also sometimes that:
THE OPERATION HAS NOT BEEN CORRECTLY!
0 5 5 5 5That's what I wanted to refer last post. I think I'm doing a correct synchronization. Am I wrong?
I don't understand that behaviour.
Anyone can help me, please?
Thank you in advance.

KYF exhibits strange behaviour with decimals

Hi everybody,
a DEC-key figure (IOBJ maintenance: additional properties->BEx->decimal places: Nothing Defined) exhibits strange behaviour regarding the treatment of decimals.
When looking at the data in the cube (InfoCube maintenance->content) the value is 2,086.
In the query the result is 2.0900000000 (%).
Now comes the problem: in BPS (in the buffer) the value is 2,08. The system simply truncates the figure! This is the value which is also used in the FOX and produces the wrong result.
I need the system to sensibly round the values correctly to 2 decimals OR work with an additional decimal place. How can this be done?
Thanks for any input,
Martin

Hi,
In the manual planning, while designing the layout, there is a setting in data columns tab called decimals. You have to insert 2 under this. Then in the layout data will be displayed with 2 decimal places.
Hope this helps.
Regards,
Isha

TCD - Peripheral Call Type 9 & 10 Strange Behaviour

Hi all,
I'm trying to get to the bottom of what causes ICM/UCCE to label a TCD record with Peripheral Call Type 9 or 10.
9 = Out
10 = Agent Inside
These values are used to populate the interval tables with ExternalOut and InternalOut
I'm seeing strange behaviour in that external calls are being classified PCT 10. Its worse on 1 pg pair and cucm cluster than the other (both pims agent ext length is 4 if this has any bearing).
From Europe PG and CUCM, most ExtOut calls are correctly classified as 9 (about 95%), but there are some 10:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 15:10:08
9
00415824xxxxx
10
4
18/02/2013 15:10:34
10
00415824xxxxx
10
4
But for Asia PG and CUCM, most ExtOut calls are classified as 10 (about 98%), but again there are some with the correct 9:
DateTime
PeripheralCallType
DigitsDialed
CallDisposition
CallDispositionFlag
18/02/2013 11:54:14
10
0080346xxxxx
14
1
18/02/2013 12:09:59
9
0080302xxxxx
14
1
For info I also see external calls with dispostion 10 and 4 in Asia as Agent Inside so it doesn't seem to tie up with that.
Any thoughts on what could be the cause, I'm kind of thinking along the lines of CUCM on net/off net or soemthing like that?
Thanks
Neil

Attached the full length TCD record.
Also found a pdf document id 67988 External Calls Appear as Internal in IPCC Statistics which says:
CauseThis problem occurs due to a change in Cisco JTAPI version. In earlier versions of Cisco JTAPI, when a
caller calls an address outside the cluster, Cisco CallManager delivers the CallCtlConnNetworkReachedEv
and CallCtlConnNetworkAlertingEv events for the far−end address.
Cisco CallManager version 4.0 and later do not deliver these events. In these versions, the CallCtlConnection
for the far−end address goes to the ESTABLISHED state from the OFFERED state. The application receives
the CallCtlConnOfferedEv and CallCtlConnEstablishedEv events for the far−end address. The application
does not receive the CallCtlConnNetworkReachedEv and CallCtlConnNetworkAlertingEv events.
In order to receive the network events, you must turn on the "Allow overlap sending" flag on the route pattern
configured for the gateway. A new jtapi.ini parameter called "AllowNetworkEventsAfterOffered" is
introduced to allow the application to control the delivery of these events. Applications that need the network
events but cannot turn on this flag can use this new ini parameter to receive network events for outgoing calls.
They are having a PG/CUCM upgrade in a few weeks so its quite possible this may sort it.

Load-Balancers strange behaviour.

Hi Gurus,
I have a kind of a strange behaviour of our our CSS11150 Load-Balancers configured in Active-Standby mode.
These LBs monitor the servers and the latters report UP and Down state from the Standby unit while they are always UP from teh Active unit.
Did anyone see this behaviour before?
Here is the sh version from both of them:
ActiveLB# sh ver
Version: ap0610203 (6.10 Build 203)
Flash (Locked): 3.10 Build 26
Flash (Operational): 6.10 Build 203
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
Thank you in advance.
P.S. It's worth mentioning that the servers weren't Down at the time when Standby unit reported Down state.

This one looks like a bug to me. I would suggest that you upgrade the firmware on the CSS to the latest version. The version that you are running is far behind the present release. I am sure that the upgrade of the firmware should solve the issue.

Strange behaviour of weblogic 6.1 while delivering charts

Similar Messages

Maybe you are looking for