Strange behaviour on two New BM3.9sp1 servers

Hi All
Environment BM3.9sp1, fresh install on NW6.5SP7 with tcp patch, Surfcontrol, 16GB ram, Dell PE2950's.
On two new servers we are seeing this wierd error whereby i can be viewing "www.amazon.com" and all is working great, then i perhaps wait a while then try and go back and for some reason i cannot connect to that site at all but i can to others.
However if i switch my proxy to "newserver2" then it works for a while until it doesnt and then i have to switch back then all is well again!. This isnt just for amazon that is just an example. Ive tried the proxy.cfg file from craigs site but i still am experiencing the same results.
Is BM somehow refusing to send me a page until a timeout period?. Its worth mentioning that when this happens collegues also cannot view that site going via the same proxy.
The site does resolve when i ping, as i thought it may be DNS but nope, a reboot will fix it.
Anyone got any ideas or have i cocked up the install somewhere?.
Cheers
Julian

Originally Posted by phxazcraig
In article <[email protected]>, Jules2003 wrote:
> One thing i havent yet tried is going to a later TCP patch than the one
> i installed. Do you have a recommended tcp patch number for NW6.5 sp7
> and BM3.9sp1?.
>
Yes, in tip #1 at my web site, I recommend tcp681k after NW65sp7. Also
wsock6o and nwlib6l.
If you put on NW65SP8 (not yet listed in my tip #1, but I've been testing
it), you get tcp 6.82/6.92.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to Craig Johnson Consulting - BorderManager, NetWare, and More ***
Thanks Craig, i have applied them patches and things seem well. To be honest i think i have traced the actual error i was receiving to a bug in Firefox 3 with static images and caching.
Can i bother you with a non-technical question?!, do you know of a roadmap for BorderManager (if any), are Novell going Astaro with Linux as its replacement and if they are how good will the eDirectory integration.
Apologies for this being out of the scope of this thread/forum.
Cheers
Julian.

Similar Messages

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

ViewObject based on two entities strange behaviour on insert

Hi,
I've noticed a strange problem today when I insered a new record in a detail view object.
I have a master entity and a detail entity and an composition association between the entities. I also have a third entity which is referenced by the detail entity using an association (and is read-only/referenced in the detail view object). Based on these entities I have the following view objects / viewlinks:
MasterView (uses MasterEntity).
\-- DetailView (uses DetailEntity, DetailRefEntity) using
the view link MasterDetailViewLinkEverything works fine, but when I add a new record to the detail view I get to see *two* new records. The first record shows empty fields for the fields that are part of the read-only/referenced DetailRefEntity. The second record shows all columns fine (how it is supposed to do). When I do a refresh on the ViewObject's I only get to see the correct detail record.
This seems like some weird entity/view cache problem to me. Is this a known problem and is there a work-around (next to refreshing the views, which I'd rather don't do)?
Regards,
Peter

Looking at your post my problem could be related, but the row I create surely gets initialized because I also set some other attributes in the new row. Next to this I use a viewlink for the relationship so I don't need to set the foreign key reference manually (like you did in your post for the department no). Anyways, like I said 9.0.3.2 doesn't fix my problem so these are probably distinct issues. When I find a solution I will update this posting, but I think it's something internal which I don't have access to. Hopefully someone from Oracle knows a workaround.
Regards,
Peter

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
 String result = "";
 try {
 // Execute a command
 Process child = Runtime.getRuntime().exec(command);
 // Read from an input stream
 InputStream in = child.getInputStream();
 int c;
 while ((c = in.read()) != -1) {
 result += ((char) c);
 in.close();
 in = child.getErrorStream();
 while ((c = in.read()) != -1) {
 result += ((char) c);
 in.close();
 } catch (IOException e) {
 return result;
 }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
 String line;
 String result = "";
 OutputStream stdin = null;
 InputStream stderr = null;
 InputStream stdout = null;
 // launch EXE and grab stdin/stdout and stderr
 try {
 Process process;
 process = Runtime.getRuntime().exec("cmd.exe");
 stdin = process.getOutputStream();
 stderr = process.getErrorStream();
 stdout = process.getInputStream();
 // "write" the parms into stdin
 for (int i = 0; i < commands.length; i++) {
 line = commands[i] + "\n";
 stdin.write(line.getBytes());
 stdin.flush();
 stdin.close();
 // clean up if any output in stdout
 BufferedReader brCleanUp = new BufferedReader(
 new InputStreamReader(stdout));
 while ((line = brCleanUp.readLine()) != null) {
 result += line + "\n";
 brCleanUp.close();
 // clean up if any output in stderr
 brCleanUp = new BufferedReader(new InputStreamReader(stderr));
 while ((line = brCleanUp.readLine()) != null) {
 result += "ERR: " + line + "\n";
 brCleanUp.close();
 } catch (IOException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
 return result;
 }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Strange behaviour in Mail

I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
Have to quit Mail - sometimes forcibly, and restart it.
Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
Had to upgrade machine to allow upgrade to Mountain Lion. Not sure which is responsible - new MB PRo , or 10.8?!
Do I really have to re-install OSX just to reinstall Mail?
Any other pointers/hints very welcome.
Thanks

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

Nokia C3-01 -strange behaviour/ problems with Noki...

When I was choosing my new mobile, I had two options : Samsung Wave 533 and Nokia C3-01. After a lot of hesitance I decided to pick up Nokia, believing to its high quality despite its poor media potential. However, now I think that it was a bad idea.
      Firstly, I have never thought that Touch and Type won't have ability to adjust brightness of the screen (AWFUL IN THE NIGHT), set up more then one alarm and use many of JAVA applications. When I tried to install some applications, it said- out of memory. Out of memory?! My old SE K770i could much more! What annoys me the most is that I can't use my e-mail account via Nokia Mail. When I press the icon of it , there is an error Null pointer exception and applications shuts. Other strange behaviour- while I was typing sms , suddenly there was hard, long vibration, screen went white and mobile restarted. Other users of C3-01, check this: go to messages, then other messages , then direct , start typing and try to go back to menu- screen turns white, mobile restarts (I'm polish , so names may be a little bit different) . How on earth, can mobile restart so often?.
    , Secondly,the funniest one- Ovi shop. Important thing in every Nokia. Guess what- I can't use it! When I to launch the apllication and try to go to the shop, there is information that it's not avaible for my phone. I used it a week ago and worked properly.
      All in all, I hope that Nokia will share an update of software to this model. I am just so disappointed. What I am sure about that next mobile will not be from finnish enterprise.
Solved!
Go to Solution.

Sorry Brother, Your Device is totally misfunctioned and FAULTY, You Need to go back to Nokia Care Centre and GET IT REPLACED.
Your Device is faulty.
Please Dont Blame Nokia Or the C3-01 Device Because both are QUALITY PRODUCTS.
I have C3-01 Since 4 Months Now and I havent Had a Single Complain about my device even though I am a Rough Handler and Using the Mobile Upto its Extend.
You Have 2 options, Try To Fix your Device at Home By :
Soft reset your Nokia C3-01 Touch and Type you need to press *#7780# and then Dial. The security code is 12345. Once you complete this, your phone will come back to factory settings, but you will not loose personal data. Anyway it is recommended to make a backup before performing any of the mentioned procedures.
To hard reset your Nokia C3-01 Touch and Type you just have to press *#7370# and press Dial. The phone will request the security code that is by default 12345. Please be aware that you will loose all the data in your phone, so you should backup all relevant information.
If Problem still persist then Connect to PC Suite/Ovi Suite and Reinstall the Firmware.
BUT U NEED YOUR DEVICE TO BE UPDATED TO ITS LATEST FIRMWARE = v06.05
If still not fixed then, REPLACE YOUR DEVICE ASAP, because as given by Nokia, C3-01 Device Works according to its Specification as Specified.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Strange behaviour when looping MIDI

Hi,
I encounter a strange behaviour when looping MIDI:
1) Created a new MIDI track
2) Recorded two bars of MIDI drum track (e.g. just a bass drum with Indie Kit Live) via my EDIROL and MIDI piano.
3) played it back: works
4) checked the "Loop" box
5) played it back: after the 4th repeat the drum pattern changes. either it misses two beats or does not play the bass drum but the hihat for two beats.
I'm using Logic Pro 8.
Can someone tell me what's going on and how this can be resolved?
Also on some occasions I have the following behaviour:
1) Recorded MIDI in loop mode (a few takes).
2) Played it back: Did not produce any sound.
3) Tried a different take from the take folder: Did not produce any sound.
4) Tried to mute/unmute track and different take from the folder: Did not produce any sound.
5) Tried to MIDI mute/unmute different takes from the folder: Did not produce any sound.
6) Closed/reopened project and MIDI unmuted the take: Played fine.
Thanks a lot for some help with those two problems.
Alex

Did not happen again in Logic 9 and after starting a fresh project.

Strange behaviour when using connection pooling with proxy authentication

All
I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
* User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
* User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
Regards,
Chris

Hi Chris,
I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
Cheers
Greg

Strange behaviour in web cartographic application

Hi group,
I have noticed a strange behaviour with the overview tool of my web application with MapInfo data uploaded in Oracle 10g with EasyLoader. When I put the cursor near the limit of some polygons but outside of its surface, the overview tool shows the info of this polygon when it should show the info of the neighbor polygon. It's like if the boundary of the polygon is outside of its limit but visually the borders are looking good.
After many tests, I think the problem may be related with the tolerance precision and the table bounds in sdo_metadata. The table is in lat/long (8307) and the tolerance setted by Easyloader is X: 7.9013E-6 and Y:1.01201E-5
In MapInfo I gave this bounds to the table: min x: -82.0483359 min y: 43.2322719 max x: -54.6521931 max y: 64.3415211 but when loaded in Oracle the bounds are automatically set to -180/180 and -90/90
I tried to change the tolerance and the bounds in Oracle and create a new spatial index without success. Changing the bounds in MapInfo prior uploading to Oracle was unsuccessfull as well.
Anything else could be tryed?
Thank you
Maxime D.

Maxime,
Didn't you contact me privately about something like this? No matter.
the tolerance setted by Easyloader is X: 7.9013E-6 and Y:1.01201E-5These tolerances are not what Oracle says should be set for geodetic (8307) data. From the documentation...
The tolerance value for geodetic data should not be smaller than 0.05 (5 centimeters)You can do one of two things:
1. If you have SQL Developer, install GeoRaptor and then right mouse click on the table in the connect pane and select Metadata Manager. Then calculate XY values and if GeoRaptor doesn't set the tolerances to 0.05 do it manually. Then press Update.
2. Using SQLPlus or SQL Developer's SQL Worksheet, do this:
update user_sdo_geom_metadata
set diminfo = SDO_DIM_ARRAY(SDO_DIM_ELEMENT(-82.0483359,-54.6521931,0.05),
SDO_DIM_ELEMENT(43.2322719,64.3415211,0.05)),
SRID = 8307
where table_name = YOUR TABLE
and column_name = YOUR SDO_GEOMETRY COLUMN NAME;
commit;NOTE: It is OK to have ordinate ranges different from -180..180, -90..90.
Drop your index and rebuild.
Should now be OK.
If it starts to misbehave again (and the metadata has been changed) then all one could say is that perhaps the MapInfo software is modifying the metadata some how. Perhaps this is related to the MAPINFO_MAPCATALOG?
Any MapInfo gurus know?
regards
Simon

Strange behaviour of weblogic 6.1 while delivering charts

Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, so I
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write the right
file. But that's too late because my script tries immediatly after the OK to
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

You should post on interest.webserver, but 200 OK is standard http response.
Don't confuse the headers with the content. I would expect that any other
simple http server functions in the same manner.
cheers
mbg
"Martin Haberstroh" <[email protected]> wrote in message
news:[email protected]..
Hi everybody,
I hope I'm right here.
I've a strange behaviour of weblogic server 6.1.
What I want to do: Requesting a chart and writing it to somewhere else, soI
send a request for this chart with wget.
It seems that weblogic server is sending an 200 OK in front of the data,
which is very strange for me.
So wget is writing a chart file with length 0, later it will write theright
file. But that's too late because my script tries immediatly after the OKto
copy the file to two other destinations.
Here's the output
bash-2.05$ /usr/bin/wget -O wlserver6.1/cache/temp/test.gif
http://192.168.1.226:7001/charts/tool?ID=103
[2] 28992
[3] 28993
[1] Done /usr/bin/wget -O wlserver6.1/temptest.gif -S
http://192.168.1.226:7001/charts/tool?ID=103
--16:24:22-- http://192.168.1.226:7001/charts/tool?ID=103
=> `wlserver6.1/cache/temp/test.gif'
Connecting to 192.168.1.226:7001... connected!
HTTP request sent, awaiting response... bash-2.05$ 200 OK
Length: 2,785 [image/gif]
0K .. 100% @ 2.66
MB/s
16:24:26 (2.66 MB/s) - `wlserver6.1/cache/temp/test.gif'
saved [2785/2785]
BTW: same thing happens with lynx, so it's not wget
Hope someone can help
Martin

Strange behaviour (bug?) of 3D widget on iPad2

Hi,
I've just encoutered very strange behaviour when playing around with 3d widget.
Here's what I'm doing:
Created new project from basic template,
On section page removed everything and placed two simple 3d objects (~7000 faces each no textures) and removed title, description, background etc from them, both was set to autorotate.
Send to my iPad using preview button.
What's happening:
When page with 3d objects opens one of them behaves as expected (autorotate), but other is either unresponsive for a very long time (few minutes) or you have to pinch it to full screen to be able to interact with it, however when you close full screen mode every thing gets normal and you can play with both objects at once.
It looks like a bug to me, but maybe someone else could try to reproduce this behaviour to rule out configuration factors.
Do you know when I could fill bug report?
Best regards,
Jacob

While there is no formal bug reporting method similar to what devs have w/apps, iBA does have a 'Provide iBooks Author Feedback' menu item.
As well, confirm your 3d related process here:
iBooks Author: Best practices for using 3D models - Support - Apple

One to many mapping - strange behaviour

I noticed a strange behaviour which happens when working with 1 to n
relationships. Maybe the behaviour is intended by the JDO specification or
maybe I haven't set the proper kodo properties to make it work.
Here's the problem:
I have the following two classes wich I map to a database table each (using
datastore identity):
class Person
private String name;
private Collection cars;
// setters and getters
class Car
private String model;
private Person owner;
// setters and getters
When I have a persistent car object and I assign it to a persistent person
like this:
car.setOwner(person);
and I immediately retrieve all cars of the person by calling:
Collection c = person.getCars()
the car ist not in the collection as I would expect it to be. In my opinion
JDO should make sure the car is added to the collection.
Even after I commit the whole transaction the car is still not in the
collection.
To make the car appear in the collection I have to create a new
PersistentManager (when using javax.jdo.option.Optimistic=true) and refetch
the person object again.
Can anyone enlighten me on this problem?
Thank you!
Donat Hauser
[email protected]
mapping.jdo
<class name="Person">
<extension vendor-name="kodo" key="table" value="PERSON"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="name">
<extension vendor-name="kodo" key="data-column"
value="NAME"/>
</field>
<field name="cars">
<collection element-type="Car"/>
<extension vendor-name="kodo" key="inverse" value="owner"/>
</field>
</class>
<class name="Car">
<extension vendor-name="kodo" key="table" value="CAR"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="model">
<extension vendor-name="kodo" key="data-column"
value="MODEL"/>
</field>
<field name="owner">
<extension vendor-name="kodo" key="data-column"
value="OWNER"/>
</field>
</class>

Donat,
This is a bit of a philosophical question. One of the goals of JDO is to
be as closely aligned to the Java language as possible, and Java has no
concept of a shared relation. So, we do not perform any work to ensure
that relations get 'magically' set on both sides. Instead, you must set
both sides of the business relation yourself in Java code.
The result of this is that code that you write will behave the same
regardless of whether or not the objects are persistent. So, you can write
test cases or non-persistent parts of your application and trust that the
code will behave the same in both instances.
-Fred
In article <[email protected]>, M__ller Alfons wrote:
>
I noticed a strange behaviour which happens when working with 1 to n
relationships. Maybe the behaviour is intended by the JDO specification or
maybe I haven't set the proper kodo properties to make it work.
Here's the problem:
I have the following two classes wich I map to a database table each (using
datastore identity):
class Person
private String name;
private Collection cars;
// setters and getters
class Car
private String model;
private Person owner;
// setters and getters
When I have a persistent car object and I assign it to a persistent person
like this:
car.setOwner(person);
and I immediately retrieve all cars of the person by calling:
Collection c = person.getCars()
the car ist not in the collection as I would expect it to be. In my opinion
JDO should make sure the car is added to the collection.
Even after I commit the whole transaction the car is still not in the
collection.
To make the car appear in the collection I have to create a new
PersistentManager (when using javax.jdo.option.Optimistic=true) and refetch
the person object again.
Can anyone enlighten me on this problem?
Thank you!
Donat Hauser
[email protected]
mapping.jdo
<class name="Person">
<extension vendor-name="kodo" key="table" value="PERSON"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="name">
<extension vendor-name="kodo" key="data-column"
value="NAME"/>
</field>
<field name="cars">
<collection element-type="Car"/>
<extension vendor-name="kodo" key="inverse" value="owner"/>
</field>
</class>
<class name="Car">
<extension vendor-name="kodo" key="table" value="CAR"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="model">
<extension vendor-name="kodo" key="data-column"
value="MODEL"/>
</field>
<field name="owner">
<extension vendor-name="kodo" key="data-column"
value="OWNER"/>
</field>
</class>
Fred Lucas
SolarMetric Inc.
202-595-2064 x1122
http://www.solarmetric.com

Aliases file - Strange Behaviour

Greetings all,
I've been having some strange behaviour with my Postfix installations lately. My logfiles are filled with intermittent entries of:
Oct 17 18:52:10 xserve1 postfix/smtpd[4117]: table hash:/etc/aliases(0,lock|fold_fix) has changed -- restarting
Oct 17 18:52:12 xserve1 postfix/local[4129]: table hash:/etc/aliases(0,lock|no_regsub|no_proxy|no_unauth|fold_fix) has changed -- restarting
This would seem to be a minor nuissance, but unfortunately it seems that mails are arriving in the second or two it takes for Postfix to restart, and are getting rejected or delayed because the service isn't available.
Looking at the /etc/aliases/postfix file, something seems to be intermittently touching it. I don't see any changes to the file content, but the modification date is updated, and an extended (@) file attribute is added for "com.apple.TextEncoding".
The only recent changes I have made to my config were to enable SASL with some directives ("smtpd_tls_auth_only = yes" for example) to ensure proper security.
My servers are running 10.6.5 and 10.6.4. Any suggestions would be appreciated. Thanks.

Looking at the logs, I'm begining to suspect that the offender is "com.apple.wikid.mailinglists". I don't use group mailing lists so I've disabled this item by adding disabled-true to its plist. Hopefully this solves the problem.

Strange behaviour on two New BM3.9sp1 servers

Similar Messages

Maybe you are looking for