Strange Blueish cast after Exporting

I color correct my 1080p clips with 3 way color corrector. When there are white portions, I usually use the eye dropper of the hilights to make sure I get a pure white.
Then I batch export them to Pro Res 422 HQ. When I check them later (pre check in Quick Time, and those with strong cast I bring back to FCP for more accurate check. Very often I find the whites (and the overall image) have a blue cast
I run a test with b&white gradient..... but can not see any color shift.
This is quite disturbing, since I work on hundreds of clips, because I have a double work color correcting them. I also notice sometimes that the clips seem to be darker than when I corrected them first.
Dorian
Message was edited by: dwctv

When color correcting, are you checking the outcome on a reference monitor, or the preview window of Final Cut pro? If yes you're bound to see differences.
The other important thing is, what are the source files you're editing with? You might be essentially (when rendering to ProRes HQ) converting 8bit to 10bit, so there are bound to be some changes...

Similar Messages

Brocken hyperlinks after exporting to SWF

hi all..
i have a really strange problem here, after exporting an e-magazine to SWF ((not PDF)) all the created hyperlinks lost, there is no action at all when i pres on any of them, please i need a help, i folowed the video that explain how to create a hyperlinks but no results.
thanks alot, if u please send to: [email protected]
thank u all

Thanks Bob!
I saw something similar mentioned on another forum but that link actually had a fix which worked great although he failed to mention the actual URL.
Here it is incase anyone needs it:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

Indesign CS4 button flashes after exported to PDF and viewed in Acrobat Reader/Professional X

Hey everyone,
Greetings!
I've encountered this odd problem when preparing my portfolio.
I've created some 40 buttons in InDesign CS4 (all according to the official tutorial) to Show/Hide Fields (specificly images), and navigate through the pages.
The buttons all have their own Normal and Rollover states, but no Click states.
After exporting the file to PDF, I tested the buttons in Acrobat Reader 9 and Acrobat Pro 9, and both the actions and the states worked fine.
BUT that's not the case with Acrobat Reader X or Acrobat Pro X.
The actions are still there, showing the images and navigating, but the states are not!
The buttons' rollover states just flashes when the mouse hover above them, and even in Normal state, they kept *blinking* randomly.
Frustrated for a week.
PS. I suspected and used a Indesign file with only one simple button to rule out the following:
1. Overlapping buttons
2. Slow processing due to large image size
3. Mishandling of transparency
At this moment I'm pretty sure it's an Acrobat thing...Help!

Thanks Dave! I was in the middle of writing this when your post came in:
Not sure if this will help anyone, but I changed the button fill color to white and it seemed to fix the flicker. I exported each state from indesign as a PDF and recreated the button from scratch. This still had the flicker. I'm guessing something strange is happening with the transparancy of the states.
Glad to hear it's fixed!

Blueish Cast in 10.8

I had a interesting thing happen after I upgraded to 10.8, here is the sequence of events:
I down loaded Mountain lion and upgraded Pages, Keynote & iPhoto. After all where installed I ran iPhoto and I got a blueish cast over the whole screen, I quit iPhoto and the cast disappeared, I then ran Pages and the same this happened, again the same with Keynote. I then ran Photoshop CS6 and the cast appeared at the load screen then disappeared when the application started, unlike Pages, iPhoto and Keynote where the cast stayed on.
I booted into disc repair run a permissions repair which there where a few things to fix whch the disc repair did. Now I do not seem to be getting the bluish cast.
Just a note to let others know how things have seemed to sort out for me. I hope this is an iscolated incedent.
Cheers
Del

the problem is for macbook pro 2010 with ssd or 7200 rpm hd installed.
mountain lion cannot load the discrete graphic driver well and it mistakes when it switch to this using some programs (like chrome, ps, Transmission and so on)
by now u can just logout and login after every restart to fix this.
i hope they'll fix it forever in the next update.

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Media unlinking after export

I am doing a Keying job, so I am replacing some clips with after effects compositions through the use of dynamic linking. When I do this the previews in Premiere show the media being present, then when I export using media encoder the footage shows up as missing. HELP PLEASE

Had the exact thing happen to me the other day. A very strange bug. After multiple renders of "missing media" with a linked AE comp (doing some camera tracking), i decided to just "Use Previews" in my final render as the AE Comp was showing up in my timeline just fine. However after re-visiting that project the next day (after a restart) and trying to render out my timeline without "use previews", the link worked fine.
I suggest close Adobe, restart, reopen project, click your AE comp inside Premiere and "edit original" to open the AE file. Reduce your render timeline to just that portion, export media, and see if the problem continues.

Strange output in ldif export?

Hi. I made an export of some data in our DS today and when i look into the ldif-file I found several strange entrys. The following is an example of what I found.
# entry-id: 8375
dn: uid=konto1, ou=people, o=oru.se, dc=oru, dc=se
modifyTimestamp;adcsn-405aed1600050065000d;vucsn-405aed1600050065000d: 2004031
9125238Z
modifiersName;adcsn-405aed1600050065000c;vucsn-405aed1600050065000c: uid=calma
ster,ou=applications,dc=oru,dc=se
icsCalendarOwned;adcsn-405aed1600050065000b;vucsn-405aed1600050065000b: konto1
$Adam Adamsson
icsSubscribed;adcsn-405aed16000500650006;vucsn-405aed16000500650006: konto1$Ad
am Adamsson
icsCalendar;adcsn-405aed16000500650001;vucsn-405aed16000500650001: konto1
preferredLanguage;adcsn-405aed16000500650000;vucsn-405aed16000500650000: en
userPassword;adcsn-405aed05000000650000;vucsn-405aed05000000650000: {SHA}4ifXl
1K3bDstAfJkfSu6mrMBf0k=
objectClass;adcsn-404eeebf000000650000;vucsn-404eeebf000000650000: top
objectClass;vucsn-404eeebf000000650000: person
objectClass;vucsn-404eeebf000000650000: organizationalPerson
objectClass;vucsn-404eeebf000000650000: inetOrgPerson
objectClass;vucsn-404eeebf000000650000: inetUser
What happend with the attributenames? What is this ";vucsn-404eee......."?
I have one master with one replica. No errors in logfiles. Using DS5.2. I hope that someone know what this is about.
Thanks in advance/ Tomas

Hi Chris and thank you for your answer.
I have got a little deeper into this by now and I realise that this started after we added a replica to the system. Ldif-files made before adding the replica is clean from this 'vucsn-' information. Ldif-files made after adding the replica all contains such entries and they tend to grow over time. Here is a simple way to tell.
master-1# grep vucsn all-suffix-2004-01-23-08.54.ldif | wc
0 0 0
master-1# grep vucsn all-suffix-2004-02-03-09.48.ldif | wc
5164 10444 388512
master-1# grep vucsn all-suffix-2004-04-04-13.28.ldif | wc
17015 35010 1159345
master-1# grep vucsn all-suffix-2004-04-27-13.28.ldif | wc
31947 65721 2086786
I have also made a test on an entry that I know is not changed since we added the replica. That entry didn't contain any strange info. After modifying an attribute on that entry, the attribute now also contain both 'vucsn-' and 'adcsn-' . I also took a look on recently added entries and they all contain this extra info on all attributes. So, my conclusion is that something happend when we added the replica. Now I just need to find out what's wrong but I dont have any idea of where to start.

Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

How can I eliminate a green rectangle showing up after exporting?

After exporting in FCP and viewing in Quicktime, a green rectangle on the right side of the Quicktime window is showing up for about 1 second at a point where there is black between two clips with fade in/out transitions. There is a slug there which I thought might have something to do with it. I tried deleting the slug but the green rectangle persists. Can anybody help me eliminate this green monster?

Nick-- Thanks so much for your reply.
CODEC is H.264.
In Sequence Settings I have the Quicktime Video Settings Compressor set to HDV 1080i60.
After rendering and saving the sequence, I click
File >
Export >
Using Quicktime Conversion. After window opens to save the file
Format: Quicktime Movie
Use: Most Recent Settings
I click "Options" >
Settings, I choose H.264, then click OK (the green rectangle appears regardless of quality setting (I tried 2 kinds: Best and Hight), (also, encoding doesn't matter, either. I tried Multi-pass and Single-Pass)
Click Size, choose NTSC 720 x 480 16:9 (using this just for a smaller file to FTP to show progress)
I then uncheck Sound and Prepare for Internet Streaming (no soundtrack on this yet), then click OK
I then click Save.
As I mentioned I tried it several different ways and each time the green rectangle shows up. I am nearing the end of this project and this is really becoming a problem. I hope you can help eliminate it. If you would like to see it I can email a small few second clip that will show it.
Thank you again--

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

MapiSendMail doesn't work after Exporting a report in CR2008 (Outlook2003)

Hi,
This one sounds crazy but I'm hoping this might make sense to someone..
We're using CR2008 SP4. In our WinForms app, we use the MapiSendMail function to open up a new email message for the user to send.
This issue only occurs when Outlook 2003 is installed (outlook 2007 and 2010 work fine).
If, in my application, I call MapiSendMail to send an email before exporting a Crystal Report to PDF .i.e oReport:Export() then both the export and sending mail work fine as long as I'm logged into my app.
If, however, in my application, I export a Crystal Report to PDF .i.e oReport:Export() and then I try to call MapiSendMail I get a generic MAPI erorr(2). I have to log out of my app to be able to open up a new mail message.
Is there anything in the Report:Export method that some affects default MAPI behavior?
Thanks,
Fergus

Hi Don,
Many thanks for getting back to me. I've found a workaround without having fully understood the cause. I'll put it all down here in case some others have similar problems.
I was already closing and disposing the report object in my code as soon as the export completed.
The Mapi error 2 is MAPI_E_FAILURE which translates to "One or more unspecified errors occurred while sending the message. It is not known if the message was sent."
I could not find any any "Access Denied"s using ProcMon.
I used the Modules.exe to determine which dlls were loaded when the MapiSendMail worked correctly and compared that to when it didn't work. One dll that poped out was "outex.dll".
I searched for that in ProcMon and (in the case where MapiSendMail didn't work) and found that it was looking for this outex.dll but couldn't find it. It's located in C:\Program Files\Common Files\System\MSMAPI\1033 but it never looked there.
So:
Calling MapiSendMail before exporting a report - outex.dll can be found
Calling MapiSendMail after exporting a report - outex.dll can't be found
To get around this I added C:\Program Files\Common Files\System\MSMAPI\1033 to the path on the machine(s) in question and it worked every time.
Thanks again for your help.
Fergus
p.s. After finding this workaround I found an almost identical problem but with Oracle instead of Crystal (How to serach text via TREX with cryptograph attachment in SAP system?).

Strange Blueish cast after Exporting

Similar Messages

Maybe you are looking for