Strange Box Around Flash IN PC I.E.
My flash files have strange boxes around them when viewed on
a PC using internet explorer. You have to click on the file before
you can access the buttons. Using I.E. 6.2.
I am baffled. Please help.
on man - ok - really must search before posting - this has
been a topic discussed every day and
lately several time per day and as recent as within the hour.
http://www.keyframer.com/?p=24
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
m.fogarty wrote:
> My flash files have strange boxes around them when
viewed on a PC using
> internet explorer. You have to click on the file before
you can access the
> buttons. Using I.E. 6.2.
>
> I am baffled. Please help.
>
Similar Messages
-
Strange Box Around Flash File IN PC I.E.
I have a strange box that appears around my flash file when
viewed using PC Internet Explorer 6.2. Thhe box appears when the
page loads and does not go away until you click on the flash, once
you do that you can access the buttons and the box goes away.
Baffled.....please help.Please dont cross-post either - already answered twice in the
flash general forum.
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
m.fogarty wrote:
> I have a strange box that appears around my flash file
when viewed using PC
> Internet Explorer 6.2. Thhe box appears when the page
loads and does not go
> away until you click on the flash, once you do that you
can access the buttons
> and the box goes away.
>
> Baffled.....please help.
> -
On my flash movies when I post them to the web, there is a
box around the movie and then it says "Click to Activate and Use
the Control". Why is it doing this and how can I get it to
stop?my 1st reaction is that these posts are just a funny
joke - since about every 8th post is on this
exact topic nowadays
My newsreader is actually downloading them as the same thread
because they share the same subject
line - usually that happens with subects like "HELP!" or
"URGENT!" lol
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
Cloudbrk wrote:
> On my flash movies when I post them to the web, there is
a box around the movie and then it says "Click to Activate and Use
the Control". Why is it doing this and how can I get it to stop? -
Remove box around flash when rollover
Does anyone know how to remove the white box inside a browser
(in my case Internet Explorer) that appears around a flash area
when your mouse rolls over into the flash area? What I've noticed
is that on some websites this actually does not happen and on other
websites it does. Is it something I can control as a flash
designer? In other words, is there a setting or something that
turns off this white box area from showing up on a mouse roll over?
Any tips or help would be appreciated.
Thank you very much,
TonyThis is why:
http://www.findmotive.com/2006/10/13/ie-click-to-activate-flash-fix/
This is how to fix it:
http://www.adobe.com/devnet/flash/articles/swfobject.html -
Here's my problem. I have a box appear around my Flash in
internet explorer, I know about the lawsuit between Microsoft and
Active X, and understand why it is there, and can even get rid of
it with a javascipt file. My problem is that whenever I get rid of
the box, I also get rid of my dhtml. Here is the page:
http://d14684333.r200.radiowebworks.com/info_farm.htm.
As you can see, my dhtml menu goes "OVER" the flash, but
because of that box, no links can be clicked until you click on the
flash. I am pulling my hair out here! How can I get rid of that box
and not get rid of my DHTML script? Please don't send me to the
Microsoft site because I read their info there and was totally
lost! Please advise. I am at my wits end! Also, by the way, I am
using Dreamweaver MX 2004. Thanks for all the help guys, I
appreciate it greatly!http://blog.deconcept.com/2005/03/31/proper-flash-embedding-flashobject-best-practices
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ChuckRWD" <[email protected]> wrote in
message
news:e9la0c$k0f$[email protected]..
> Here's my problem. I have a box appear around my Flash
in internet
> explorer, I
> know about the lawsuit between Microsoft and Active X,
and understand why
> it is
> there, and can even get rid of it with a javascipt file.
My problem is
> that
> whenever I get rid of the box, I also get rid of my
dhtml. Here is the
> page:
>
>
http://d14684333.r200.radiowebworks.com/info_farm.htm.
>
> As you can see, my dhtml menu goes "OVER" the flash, but
because of that
> box,
> no links can be clicked until you click on the flash. I
am pulling my
> hair out
> here! How can I get rid of that box and not get rid of
my DHTML script?
> Please don't send me to the Microsoft site because I
read their info there
> and
> was totally lost! Please advise. I am at my wits end!
Also, by the way,
> I am
> using Dreamweaver MX 2004. Thanks for all the help guys,
I appreciate it
> greatly!
>
> -
All the flash work I've designed, when I open up a site where
the element is, a box is around the flash....what is this box? If I
click on the box, it disappears. If i put my mouse over the flash,
that box appears around the flash. Is there a way I can fix this is
or is it a setting n my browser and/or flash player? Here is an
example:
http://bradyallmondds.com/.
Place your mouse over the header, and you'll see what I mean.
Thanks, Guys and Gals!
Chuckyour .js file looks like this:
{\rtf1\ansi\ansicpg1252\deff0\deflang5129{\fonttbl{\f0\froman\fcharset0
Times New Roman;}{\f1\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit
5.41.15.1507;}\viewkind4\uc1\pard\sb100\sa100\f0\fs24
var bo_ns_id = 0;\line\line function startIeFix()\{\line
if(isIE())\{\line
document.write('<div id="bo_ns_id_' + bo_ns_id +
'"><!--
');\line\}\line\}\line\line function endIeFix()\{\line
if(isIE())\{\line
document.write('</div>');\line var theObject =
document.getElementById("bo_ns_id_" + bo_ns_id++);\line var
theCode =
theObject.innerHTML;\line theCode = theCode.substring(4
,9+theCode.indexOf("</object>"))\line
document.write(theCode);\line\}\line\}\line\line function
isIE()\{\line //
only for Win IE 6+\line // But not in Windows 98, Me, NT 4.0,
2000\line var
strBrwsr= navigator.userAgent.toLowerCase();\line
if(strBrwsr.indexOf("msie") > -1 &&
strBrwsr.indexOf("mac") < 0)\{\line
if(parseInt(strBrwsr.charAt(strBrwsr.indexOf("msie")+5)) <
6)\{\line return
false;\line\}\line if(strBrwsr.indexOf("win98") > -1
||\line
strBrwsr.indexOf("win 9x 4.90") > -1 ||\line
strBrwsr.indexOf("winnt4.0")
> -1 ||\line strBrwsr.indexOf("windows nt 5.0") >
-1)\line\{\line return
false;\line\}\line return true;\line\}else\{\line return
false;\line\}\line\}\par
\pard\f1\fs20\par
There seems to be a lot of extra stuff in there that would
make it not be
valid javascript. It hsould just be a plain text file.
Jeckyl -
Box around flash files in explorer
I am doing a site with flash buttons and every tim i go to a
new page and roll over the buttons section a bounding box comes up
around everything that is flash. When you roll over it, it tells
you to click to activate this control.
it works fine in mozilla but not in explorer. I havent had
this problem until recently and i am wondering is it a new version
of explorer that is doing this and i need to change some browser
settings or something.
Here is the link to the test site.
http://www.firstlinemedia.com/test
ThanksHi Mike,
Sorry, but that link won't work.
Here is the text of the post:
At my company I create LMS enabled lessons to help clinicians
learn to use patient tracking software. We recently encountered a
small problem that might be encountered by others who use this
forum. I thought I’d post my experience.
The issue began when my company began upgrading computer
terminals with the latest version of Windows XP. The symptoms of
the problem occurred when a web page containing any active content,
such as Flash, QuickTime, etc., displayed via the latest version of
Internet Explorer.
Here is the sequence of events:
After a page containing active content loaded, the user would
hover a mouse over the (active) content. At that time two curious
things would occur; a gray “bounding box” would appear
around the borders of the active content, and a small message box
would appear saying “Click to activate and use this
control.”. The user would have to click the active content
(to make the message and bounding box disappear). After the message
and bounding box disappeared the active content would function as
intended.
For me this meant that HTML files where I had Flash embedded
(generated from a Captivate file) would require an initial mouse
click to activate the (Flash) control. (I had many short Flash/HTML
files strung together for form a single lesson. I did this to track
the users progress through the LMS.) Each time a HTML page with
active content loaded the user would have to repeat the mouse
click. This was not a good thing for my lessons.
After doing a little research I found a Macromedia/Adobe
article that explained what was causing this new quirk and how to
work around the problem.
Here is a link to that article:
http://www.adobe.com/devnet/activecontent/articles/devletter.html
I thought this might be helpful for any folks encountering
the same problem.
Cheers TPK -
Box around curser, dock and desktop
I have a strange box around my curser, dock and anything on the desktop. Any help is appreciated.
Try starting in
Single-User-Mode(Hold the cmd()+S when you hear the tone and release when you see the Apple logo) this will give you a black screen with text (command-line) wait till it finishes booting up and you have a command prompt(localhost:/root#) then type in (/sbin/fsck -fy) this verifies and repairs your startup drive. If it finishes and reports the hard drive has been modified---repeat the command-line entry as above.
Do that until it report the hard drive is OK. then type in (reboot).
If that doesn't work, you might want to reset the <a href=http://docs.info.apple.com/article.html?artnum=2238>PRAM</a> -
Strange Black Box around every prompt I am given...
This is very strange. I started up iChat for the first time on MBP and am now having a very strange occurance. At every prompt there is a strange black box around it. For example, right now there is a black box around the back arrow in my safari browser. When I open the finder there is a black box around my hard drive. I just opened system preferences and there is a black box around the back arrow in system preferences box...
Can anybody help me?
MacBook Pro 2GHz, PowerBook G4, PowerMac G4 Mac OS X (10.4.5)heheh ya it's funny when you look at the people who just hear the mac talking and they don't know wat to do.. but ya.. universal access is only for that.. for the F8 key is exposè, which is nothing related to Universal Access at all, so you can keep Universal Access options off and exposè will still running
Anyway, you can configure both from the System Preferences. -
My ipod is acting so strange? boxes around everything? and wifi doesnt work.
Hi
Well this morning I turned on my ipod and my internet wasn't connecting so I went to settings >> wi-fi >> and it was off, so I tried turning it on with the off/on slider and when it went to on , the box that comes up to select a network didnt appear. I tried again and it still wouldnt. It isn't on airplane mode either :\
How do I fix this?
After that I went to General in Settings and I probably clicked something I shouldnt have, now EVERYTHING I tap comes up with a box around it and I have to double app to select things and it is REALLY annoying! I tried going back to General but now I have this stupid box thing I can't scroll down to fix it
What should I do? I wanted to email Apple but I can't find how to.. is it just calling them these days?
Thankyou very much in advanceIt appears that you have VoiceOver or anothr accessibilty feature turned on. Turn them off by:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
For the wifi problem try:
iOS: Troubleshooting Wi-Fi networks and connections -
Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong resizable black box sitting on top of anything. The content changes depending on the actions I take. Right now it says, "You are currently on a close button. To click this button, which closes the current window, press Control-Option-Space." Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there. I've tried closing all my applications and restarting and I also reset the PRAM. It won't go away. It's probably something simple, but I don't know how to get rid of it. Any suggestions are welcome.
Thanks,
JanetThanks so much. I saw this on "desktop strangeness" immediately after I posted and tried to retract my question. It worked perfectly. I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer. I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up. Still looking for the resolution to this.
-
White box around png images in Final Cut Express 4.0
I was putting in some muzzle flashes into my video with final cut express 4.0, they were png images and there was a white box around the muzzle flash after i used the composite mode screen effect, if anybody knows what the problem is i could use the help.
I inserted a 3D bullet into my movie and it had a black background. I used Composite Screen and it it worked, but it made the bullet slightly transparent. What should I do?
-
IWeb 3.03 and Firefox 4 weird boxes around images
Just built a small site (keepourcityclean (dot) org) but for some reason it looks good on Safari but not on Firefox. There are strange boxes and
lines around images that are obviously indicative of the formatting that iWeb uses, but why doesn't it work across all browsers? Is there a fix?Not all browsers display a site the same because they implement web standards differently. Tried to log onto you site but it wouldn't load. Just kept the loading wheel going and going and going.
However, this tutorial might be of some help: #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image. It certainly will help in making sites more compatible with Internet Explorer and older versions of Firefox.
Since the http://keepourcityclean.org/Home.html won't load maybe you could take screenshots of the boxes in Firefox and post them in a reply.
OT -
Removing border around Flash content
I really cant stand what adobe has done to the flash player.
They totally messed it up.
My question is how do I remove the box/boarder that the new
flash player puts around flash content.
Go to a site with flash content, once there hover your mouse
over the content, you will notice a box/boarder around the content
now.
HOW DO I REMOVE THIS, so freaking annoying!
Just leave Flash how it was Adobe.
Good to see how you come and take over macromedia, and then
you jack with thier software making it a total annoyance.
Tell me how to turn this boarder crap off.You really are shooting off obviously without having read any
of the
hundreds of news reports on this in the last couple of months
.. nor the
hundreds of forum posts here. Do a little research before you
start
mouthing off about what adobe has done .. otherwise you are
just looking
very foolish.
Adobe has done nothing here. Microsoft have been forced as a
result of
EOLAS suing them to change how IE works with all embedded
ActiveX controls
(including Flash).
It is up to web site authors to change their HTML so the
flash content
doesn't need to be activated.
There is nothing you can do about it, nor adobe, nor
Microsoft.
You can temporarily do something about it be going to MS site
and
downloading a patch that turns off this new behaviour for a
month or two
(its only a temporary fix).
If you are a web site author, then see the many posts in the
flash general
discussion about what you should do .. in particular look at
http://activecontent.blogspot.com
Jeckyl -
I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?
Welcome to iMovie Discussions.
See my 2nd reply to 'getzcreative', here.
Maybe you are looking for
-
Handwriting input on X60T after Win 8.1 upgrade
Hi Folks Has anyone else had trouble getting their apps to insert handwritten text from the Tablet Input Panel? If I use onscreen keyboards, no problem. Only has a problem with parsed handwritting; and then only on some apps like the notes editor i
-
Crystal Reports 2008 Setup Has Failed
Post Author: MWheeler CA Forum: Upgrading and Licensing I get a setup error as soon as I hit "install" on the English upgrade to 2008 on my Windows Xp Sp2 machine. I am running XI developer edition on this machine. The Window title for the error me
-
PI7.0: SLD - Technical System of type "Exchange Infrastructure"
Hi Guys, The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps 1. Switch to "Home" in the "Technical Landscape"
-
3-4 seconds added on audio wavs when burning cd's
i like to put very brief audio wav clips on my cd's and when i burn one of 2 seconds it comes out as six on the finished cd. does anyone know why 3-4 seconds would be added on to the finished product?
-
Junior SAP FICO Consultant job
My name is Yunlong. I graduated on Dec. 2013. I joined a project as a SAP FICO consultant last Jun, and work there till this Jan. I also have about 2 years experience in FICO back in China. Now I am on STEM extension, it will expire on next July. I a