Strange bug/problem in mobile server control center

I am running Mobile server control center for settings some properties for synchronisation. When I leave the system idle for few minutes, I get the following errors:
WTG-10109: Web-to-Go could not locate requested URL
Web-to-Go could not locate requested URL /admin/console/usrblank.html
Please contact the application vendor
Also this error "oracle.html.HtmlRuntimeException: HtmlFile.toString() IO Exception caught" .
I had to restart the server again. This happens all the time when I leave the system idle for few minutes.
I dont think this is a session problem. Even if this is session problem then it should give a valid error message.
My session timeout was set to 180 minutes(default).
Your suggestions will help us to evaluate the product.
Thanks a lot in advance.
regards
Yugandhar

RP
thanks but I tried all combinations and understand from metalink and other replies in this discussion forums, we need to remove the mobileadmin schema and reinstall it.But dont know why - is it a bug or some problem with installations.
I am still not able to enter as ADMINISTRATOR/ADMIN or administrator/admin(if case sensitive).
thanks in advance for suggestions.
regards
Yugandhar

Similar Messages

Mobile Server Control Center?

Hi,
Where can i find Mobile Server Control Center?
Http://localhost/webtogo/startup is working fine.

sorry,
found it

Installation/Config Problem with Sun Directory Server Control Center (6.0)

Hi All,
I have recently attempted an installation of Sun Directory Server EE 6.0 on a x86 Solaris 10 machine.
I have selected to install Core Directory Server and Sun Directory Server Control Center with my installation.
After installation, if I check the status of the SUNDSCC, I receive the following message:
bash-3.00# ./dsccsetup status
DSCC Application is not installed
DSCC Agent is registered in Cacao
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
I have also tried to re-start the Sun Java Web Console using the /usr/sbin/smcwebserver start command but that does not do anything.
If i try to initialize the SUNDSCC usin the ./dsccsetup initialize command, the registry got created, but it still displays as "application not installed".
I do not understand. I have already installed this application using the JES installer.
please help!
Regards,
Saahil Goel

I had a similar issue. Here is how I fixed it.
Run dsccsetup status with the -v option. it will show you where it is trying to find the DSCC Application. Then do a find on your system to see where it is actually installed. Then simply copy it over to where dsccsetup is looking for it. Then do dsccsetup initialize. Below is what it looked like on my system when I did it:
# ./dsccsetup status -v
## /usr/sbin/smreg is present
## /usr/sbin/smcwebserver is present
## /opt/server/sun/dscc6/dccapp is MISSING
DSCC Application is not installed
## /opt/sun/cacao/bin/cacaoadm is present
## /opt/server/sun/dscc6/lib/jar/nquickmodule.jar is present
## Running /opt/sun/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /opt/sun/cacao/bin/cacaoadm status
## Running /opt/sun/cacao/bin/cacaoadm list-modules
## Running /opt/sun/cacao/bin/cacaoadm get-param network-bind-address
## Running /opt/sun/cacao/bin/cacaoadm get-param jmxmp-connector-port
## /opt/server/sun/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /var/opt/sun/dscc6/dcc/ads
Port of DSCC registry is 3998
# find / -name dccapp
/opt/server/dscc6/dccapp
# cp -R /opt/server/dscc6 /opt/server/sun
# ./dsccsetup dismantle
DSCC Application is not registered in Sun Java(TM) Web Console
Unregistering DSCC Agent from Cacao...
Deleting DSCC Registry...
All server registrations will be definitively erased.
Existing server instances will not be modified.
Do you really want to delete the DSCC Registry ? [y/n]y
Server stopped
DSCC Registry has been deleted successfully
# ./dsccsetup initialize
Registering DSCC Application in Sun Java(TM) Web Console
This operation is going to stop Sun Java(TM) Web Console.
Do you want to continue ? [y,n] y
Stopping Sun Java(TM) Web Console...
Registration is on-going. Please wait...
DSCC is registered in Sun Java(TM) Web Console
Restarting Sun Java(TM) Web Console
Please wait : this may take several seconds...
Sun Java(TM) Web Console restarted successfully
Registering DSCC Agent in Cacao...
Checking Cacao status...
Deploying DSCC agent in Cacao...
DSCC agent has been successfully registered in Cacao.
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
DSCC Registry has been created successfully
Hope this helps.

Configuring Directory server control center after installation..

Hi,
We have already installed Sun Java Communication Suite 6.0 on a Sun solaris 10 machine along with Directory Server.
During installation , we have skipped the directory server control center component. How do we select the same after the installation?
Any addition inputs for configuration of Directory server control center will be helpful.
Thanx in advance....
Edited by: ashish0_0 on Nov 18, 2007 9:40 PM

Hi,
We have already installed Sun Java Communication Suite 6.0 on a Sun solaris 10 machine along with Directory Server.
During installation , we have skipped the directory server control center component. How do we select the same after the installation?
Any addition inputs for configuration of Directory server control center will be helpful.
Thanx in advance....
Edited by: ashish0_0 on Nov 18, 2007 9:40 PM

Problem with execution results (Control Center)

Hi,
I have created a mapping with output parameters.
Unfortunately, when i run the mapping, i can't see the values in
the output parameters through the job details reporting (control center).
Is there any patch that correct this problem ?
TIA,
Stéphan

Hi,I have also somewhat similar problem in creating content selector using e-business control center.The problem is that in the Window titled "Select Customer Segments", there are no radio buttons for specifying whether Qualifying visitors may belong to Any or all of these segments. Although it is mentioned in the documentation yet not available in actual.So when we try to save it the following error appears"Atleast one selected clause has not been completed. Offending clauses: [Action clause has not been completed.].Please tell me what to do?Regards,Atif

Problem with E-Business Control Center

Hi,
I am trying to create a content selector using the e-business control cnter. When
I try to save it I get the following error.
The content selector is not complete. Please complete before saving. Could not
save the rule. Could not find GlobalContentSelectors to save the rule.
Can somebody help me with this?
Thanks and Regards,
Subramaniam

Hi,I have also somewhat similar problem in creating content selector using e-business control center.The problem is that in the Window titled "Select Customer Segments", there are no radio buttons for specifying whether Qualifying visitors may belong to Any or all of these segments. Although it is mentioned in the documentation yet not available in actual.So when we try to save it the following error appears"Atleast one selected clause has not been completed. Offending clauses: [Action clause has not been completed.].Please tell me what to do?Regards,Atif

HP MediaSmart server control center quit unexpectedly error message when installing the server console

Need help installing the software. Keep getting the error message above

Need help installing the software. Keep getting the error message above

Sample JAVA Mobile Server Publish code, and technical questions

Dear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
     1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
     2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
     1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
     2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
     3. Webtogo.ora
     4. tnsnames.ora for the Mobile Server.
     5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora file

Dear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
     1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
     2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
     1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
     2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
     3. Webtogo.ora
     4. tnsnames.ora for the Mobile Server.
     5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora file

How to set Data Subsetting Parameters in MOBILE SERVER

Hello.
How can I set data subsetting parameters in Mobile Server with patch 5.0.2.10.0 NLS.
From Mobile Server "Control Center" -> "Applications" it's not appears at left screen the following field:
* Data Subsetting
* Registry
* Access
* Files
The browser appears this error message:
"http://120.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp"
Have you any idea for this problem?
Thanks All.

Thanks Oliver,
I have to go in control center in "applications tab" then i have the list of application and i edit one of them, on the left clic Data Subsetting it's not appears.
The following it not appears:
* Data Subsetting
* Registry
* Access
* Files
The browser (internet explorer) appears (at buttom on the left browser) this error message:
"error http://127.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp missing link".
Whereas (Oliver's solution) in Mobile Server "Control Center" -> "Users Tabs"
i have the list of users go and i edit one of them, on the left clic Data Subsetting then clic on the right pan platform and then i see but not parameter are definited.
Help me please.

Control center problems in iOS 8.1.2

Hi!
I just wanted to see if anybody else have any problems with bringing up the control center in apps on the iPhone 6 Plus? On the homescreen and lockscreen I experience no problems bringing up the control center but when in apps, swiping from bottom to up, the control center only appears around 4 out of 10 times. Worth noting is that having the keyboard showing when for example writing a message makes it even worse, with a success rate of about 2 out of 10 swipes. Oddly enough I never had this problem with my previous iPhone 4. Is this something that Apple is acknowledging?

I haven't seen that problem.
When trying to bring up the Control Center in an App it is best to start your swipe with your finger actually off the screen (on the border). This will help in bringing up the Control Center.

IPad 2 control center for music not working for iOS 7.0

I have downloaded iOS 7 on my iPad 2 and I cannot play music of control itune from the new control center. I have to play it by going to itune itself. Is there a bug on iPad 2 for control center? Other controls like wifi or airplane mode does work.

I have the same issue with the ipad 2, works fine on the iphone 4s, any progress in getting this resolved

Start_Service is Not Available in OWB Control Center Manager

I am running OWB 10.2.0.1.0
I have one problem connecting to the Control Center Manager
(RTC-5260,RTC-5301).
RTC -5260: Failed to connect to Control Center. Please check you have provided the correct host, user, password, and service name.
RTC - 5301: The Control Center Service is not currently available.
I am logging as my repository owner and I run the script start_service.sql in Sql*Plus location in “@OracleHome\owb\rtp\sql\....”.
SQL> @e:\OraHome_1\owb\rtp\sql\start_service.sql;
Not available
Diagnostics:
service startup failure using command "cmd /q/c E:\OraHome_1\owb\bin\win32\run_
service.bat -manual 1 E:\OraHome_1 REP_PROPIETARIO WORACLE10G.BFGP.COM 1521 JDE
OWB" reason ORA-29532: Java call terminated by uncaught Java exception: java.io
.IOException: service early exit: code=0 : err=2007/02/16-14:51:50-GMT-04:00 [8
72380] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: A
n infrastructure condition prevented the request from completing.
- ORA-01882:
timezone region not found
at oracle.wh.runtime.platform.service.controller
.PlatformDb.connect(PlatformDb.java:83) at oracle.wh.runtime.platform.service
.Service.<init>(Service.java:125) at oracle.wh
PL/SQL procedure successfully completed.
SQL> @e:\OraHome_1\owb\rtp\sql\show_service.sql;
Not Available
PL/SQL procedure successfully completed.
How can I place availably the service?
pls help...
regards
Jorge M. Tomioka M.
[email protected]

Hi Jorge,
You have something to do in your local PC with regard to its timezone setting. Please follow the below link ...
RTC-5260 AND RTC-5301
Cheers,
Swagata

Forms Server Control Scipt error

Hi All,
I have R12 installed in my machine which is a Oracle enterprise Linux. The usual way I start the Oracle Application is First start the Database and then the Application.
I run adstrtal.sh script for starting the application. This is the usual way I start Oracle Apps. But now I encounter a problem. After running the scripts my application is not starting. When I type in the address the page usually redirects to the login page. But i get this error now.
The requested URL /OA_HTML/AppsLogin was not found on this server.
I checked the log file of adstrtal.sh.There is a problem with Forms server Control Script (adfrmctl.sh)
It exists with status 204. The log file details are below.
07/02/08-11:36:27 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=mecca.gaeaglobal.com:6200
0 of 1 processes started.
ias-instance id=gaea_mecca.mecca.gaeaglobal.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/forms/default_group/
Error
--> Process (index=1,uid=1660036927,pid=6013)
failed to start a managed process after the maximum retry limit
Log:
/r12/oracle/gaea/inst/apps/gaea_mecca/logs/ora/10.1.3/opmn/OC4J~forms~default_group~1
07/02/08-11:36:57 :: adformsctl.sh: exiting with status 204
This is the same for adoafmctl.sh and adoacorectl.sh.
Pls do help me.
Regards
Niranjan.G

Try the solution outlined in the following note:
Note: 412980.1 - oafm,forms and oacore not starting up after IP address change
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1
If the above does not help, please run AutoConfig and check whether it completes successfully or not. If it shows any errors, please post it here.
Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle Applications Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

Application Server Control - Servlet error: Error instantiating servlet

After migrated oracle ias to 10.1.2, I have problem access Application Server Control <serverip:1810>. The error from the web is
"500 Internal Server Error
Servlet error: Error instantiating servlet 'console' (servlet class not found, make sure it exists at /oracle/iasdev/sysman/webapps/emd/WEB-INF/classes/oracle/sysman/eml/app/Console.class, in a jar in /oracle/iasdev/sysman/webapps/emd/WEB-INF/lib/, in an orion-web.xml specified classpath or global server classpath)
I checked in /oracle/iasdev/sysman/webapps/emd/WEB-INF/lib/, there are may .jar files as below
bc4joem.jar
d4o.jar
disco_dsc.jar
disco_dsc_smi.jar
discoconfig5.jar
emd.jar
emdjsp.jar
formsConfig.jar
frmem.jar
frmem_jsp.jar
frmemplugin.jar
iview.jar
jcb.jar
junit.jar
log4j-core.jar -> /oracle/iasdev/sysman/jlib/log4j-core.jar
ojpse_2_1_5.jar
oracle_forms_rb.jar
portalEMD_jsp.jar
reportsConfig.jar
reports_emd.jar
reports_emdjsp.jar
ssoEMD_jsp.jar
ultrasearch_emdjsp.jar
usca.jar
webcachecfg.jar
wireless_admintool.jar
wireless_sysmgr.jar
I wonder any settings need to be fixed/added ? please help ?

Do you think you can reconfigure the EM, using something like this below, actually i use this for Database, but I am sure with few changes you should be able to reconfigure application server EM.
$ORACLE_HOME/sysman/admin/emdrep/bin/RepManager -connect <TARGET>
-sys_password <password> -action drop emca -config dbcontrol db
-repos create –cluster
Thanks
Amit

Control Center Debug Error

A few days ago I installed the latest version of Control Center, 2.5.060, and it worked fine until today when it started putting up a debug error, "This application has requested the Runtime to terminate it in an unusual way". I tried uninstalling it and re-installing it, also tried doing a system restore to about a day ago when I'm pretty sure the problem wasn't there.
This problem came up after making some changes to the IME. I updated to the latest version but ran into a transient problem where the IME driver was failing when coming out of suspend, so I tried rolling back to the previous version. That seemed to fix the problem with the driver failing but then the problem came up with Control Center. So I tried updating to the latest version again, now it seems to be working when coming out of suspend but Control Center isn't. If I click on ignore it just hangs at the loading screen and has to be manually terminated, if I click retry it just crashes.
I previously had a problem with Control Center putting up the error message about replacing the IME version. I solved that by turning off Control Center Count. Now I've tried it with and without Control Center Count running but just get the same debug error no matter what.
Specs;
CPU: Intel Core i5 3570k @ 3.4 GHz
Mobo: MSI Z77A-GD65 Gaming
RAM: 2 x 4 GB G SKILL Ripjaws DDR3-1600
GPU: Sapphire Radeon HD 7870 OC
HDD: WD Caviar Black 1 TB
ODD: Asus 24x DVD Burner
PSU: Rosewill Capstone 650-M 80+ Gold Cert.
OS: Windows 7 Home Premium x64
Any assistance would be appreciated. Thanks in advance.
Edit: Just noticed that I'm getting the same problem with ClickBios
Also tried rolling back to the previous version of Control Center, no luck there.

>>Posting Guide<<
What hardware are you running, please read the posting guide.

Strange bug/problem in mobile server control center

Similar Messages

Maybe you are looking for