Strange camera problem when adjusting screen?

I just bought an S10 and noticed that the camera disconnects then reconnects every time I move the screen forward or backward.
Everytime this happens I hear the Windows chime indicating that a USB device was unplugged then plugged back in.
Is this normal?

This looks like some wire lost it's seat or has defect in it. You should send it to repair.
//help will save the world

Similar Messages

  • Unwanted noise when adjusting screen brightness

    Are there any other new iMac (iSight) owners out there experiencing unwanted noise when adjusting their screen brightness to any setting other than maximum? Dimming my screen causes a loud buzzing sound similar to feedback you get with bad grounding.

    Dyummy,
    Thanks for posting this link. I am as puzzled as some of those posters are, since this noise only happens under Vista and not in OSX. In my case it also happens in the lower right side of the screen and only when I lower the screen brightness in Vista five or six notches using the F1/F2. If I lower the brightness using the nVidia control panel in Vista there is no sound either. The only problem is that the nVidia control panel is not very good and quite limited at lowering the screen's brightness.
    I am still inclined to believe this is a driver/software issue with the nVidia 256MB card or the display. If your screen replacement helps, let us know.
    Thanks,
    JLC

  • ITSMobile - Problems when changing screen layout with CSS

    Good afternoon,
    I have a service ZLM00(SICF) with some public screens in the stile MOBILE4(Service of  internet-se80), and I am trying change your layouts with CSS.
    Steps taken:
        1 u2013 I activated the repository MIMES (/default_host/sap/public/bc/its/mimes);
        2 u2013 I copied the mobile.css from internet service standard ITSMOBILE for my service ZLM00(se80) with the name ZRF01.CSS;
        3 u2013 I added the parameter ~ITSMOBILECSSINCLUDE = ZRF01 in my service ZLM00(SICF);
        4 u2013 I published all screens and file ZRF1.CSS;
    The problem:
          When I test the service in the browser, I see in the source code that the file CSS was added u201C<link rel="stylesheet" href="/sap/public/bc/its/mimes/zlm00/99/ZRF01.css" type="text/css" />u201D
          And the screens received some changes, however when I added a new line in file CSS for exemple
    /* --- Basic Row -
          .MobileRow {
            white-space:pre;
            vertical-align:middle;
            background-color:#F3F3F3;  "new lineu201D
            Is not ok. Just the command standard works.
            I am doing something wrong ? Is missing some step ?
            My configurations:
             - Version SAP ECC 6.0/SAP_APPL 604 SP8;
             - Device mobile Symbol/motorola MC3190;
             - Operating system Windows CE 6.0 with Internet Explorer 6.0;
             SICF:
             ~THEME                          99
             ~TRANSACTION                          LM01
             ~ITSMOBILE                          1
             ~SOURCES                          ZLM00,ITSMOBILE
             ~POPUPS                           1
             ~ITSMOBILECSSINCLUDE     ZRF01
             ~ITSMOBILEELEMUNITS       px
             ~DYNPRO_COMPRESSION     1
             ~ITSMOBILECUAINCLUDE     ZCUAAREA
             ~ITSMOBILEELEMFACTOR      6
          PS: I am trying change the layout of the screens only to remove blank spaces placed on the screen MOBILE4, the objects do not fit the device screen.        
          Best regards,  
          Gerson S. Livio

    No.
    If you want to see how the screen will look; look in the iPhone/ iOS 7 section of this site.

  • Strange TableView problem when entering editing mode.

    I'm having a problem when entering editing mode in a tableview. What happens is the cell data from the section below is being displayed on top of the last cell in the current section.
    The narrower cell, with the plus sign on the left side, is briefly visible before (a copy of) the cell from below covers it up.
    Has anyone else seen this behavior? I'm really stumped here.
    More info, or how my table isn't standard: Each of the three sections is populated from a list. If the user has previously deleted one of the items from the section, only then is the plus sign shown. Otherwise, only the delete sign is shown. In other words, if there isn't anything to add, then the plus sign with the associated ...add a new X is not shown. This all works correctly. The counters work. The lists of previously deleted items are populated correctly.
    What doesn't work is the last row of the second section being covered by a copy (at full width) of the first row from the third section. The first and third sections both look correct. phew, I hope this makes sense.
    Here is what it looks like:
    Sizes
    - Size 1
    - Size 2
    + ..add a new Size
    Measurements
    - Measurement 1
    - Measurement 2
    Note 1 << this is the problem row
    Notes
    - Note 1
    - Note 2
    + ...add a new Note
    Thanks for any help you can provide.
    Ty

    OK, after more digging I answered my own question.
    The problem was the section order for added and deleting rows in setEditing. I was setting the indexPathForRow in section 2, then, 1, then 0. If I do the update in order 0, 1, then 2 it works fine in 2.0, 2.1, and 2.2.

  • Strange display problem band through screen -=Pictures included=-

    I bought a refurb intel imac and had it delivered on May 30th. June 2nd, I brought the computer in to the apple store to repair the bleeding backlight on the LCD (corners were very bright); I just picked it up again on June 5th.
    At first, I was very impressed with the turnaround time on the repair (3 days, 2 of which were weekend days). However, once I got the imac home & set up again, I was disappointed to see a thick discoloured bar down the entire vertical length of the screen!
    The band is really strange; it changes colours depending on what colour is on top of it, and seems to flicker. I've determined that it only appears when the display is set on "millions of colours", not "thousands" or "256". I've also tried resetting the PRAM with no luck...
    What are my options here? Is there an easy fix that I can try myself? Or is it more likely that the Apple store techs damaged something internally when they installed the new LCD? I really don't want to lug this computer back to the store, wait several more days, then lug it back home again. It's a huge inconvenience especially since the imac is all-in-one so I'm left using my old PC that was looking forward to a peaceful retirement...I just don't see any other choice...
    iMac 20" core duo 2.0   Mac OS X (10.4.6)   1GB RAM; 128 MB Video

    It appears this other post on another thread shows a similar pattern. You might have to be logged on to see it:
    http://discussions.apple.com/message.jspa?messageID=2487810#2487810

  • Bright blue cast causing problems when adjusting blacks on RAW files

    Just recently, I'm seeing bright blue in the darkest areas of my RAW images when working in Elements 8.  It's very distracting, as you can imagine.  Of course, when I adjust the blacks with the Alt key and the slider it just gets worse.  If I complete the adjustments to the RAW file, save it as a PSD and then open it in the regular Elements workspace, the bright blue colors disappear and the photo looks normal.  Any idea what might be causing this and how do I fix it?

    Thank you to a fellow photog who answered my question via Facebook!  Apparently one of my assistants mistakenly made adjustments in the Libray tab to the "Saved Prest" which saved her settings as "Custom" as well as saved the Whitebalance change she made there and the Tone Control section.  I hit the "reset all" button under Tone Control and all is right with the world again! WHEW!

  • My 5700 camera, problems when i want to capture a ...

    when i switch to video mode it shows me an error: general: system error!
    and i cant capture any video just photos or panorama.
    do anyone knows whts the problem!???
    Attachments:
    New Image.GIF ‏22 KB

    Reset your phone to factory settings 12345.
    If this does not work, backup your phone and do a *#7370#
    reset. If this fails too solve the problem take it to the Nokia care.
    If my post has helped you please click the white star on the right

  • Kerberos local DC problem when using screen sharing

    Hi,
    this is a brand new Mac Mini server with preinstalled ML and Server.app 2.2.1.
    I started the following services: DNS (automatic), OpenDirectory, Sharing, Web and Mail. One additional user and that was it.
    After this configuration session, Kerberos seems to be in a non-operable state. See the information below. I can log in locally, can access a share (similar LKDC related error message as below), mail and screen share. But screen share takes ages to start and gives some nasty error messages.
    I have almost no knowledge of Kerberos and could use any help to fix-up the Kerberos configuration, preferably without reinstalling.
    If there is anything else you need to see about the server configuration, please ask.
    Turnin OD off and on again did not change anything. Keeping it off removes the error (obviously) but I think this will not be good for server operations.
    Regards, Andreas
    Problem statement: accessing the server from a ML client gives the following KDC error sequence before the authentication succeeds. This can take 20-30 seconds.
    26.02.13 15:31:21,001 kdc[2321]: Got a canonicalize request for a LKDC realm from 192.168.178.32:59299
    26.02.13 15:31:21,001 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:21,001 kdc[2321]: Got a canonicalize request for a LKDC realm from fe80::426c:8fff:fe37:6b28%en0:59300
    26.02.13 15:31:21,001 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:21,021 kdc[2321]: Got a canonicalize request for a LKDC realm from 192.168.178.32:59301
    26.02.13 15:31:21,021 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:21,021 kdc[2321]: Got a canonicalize request for a LKDC realm from fe80::426c:8fff:fe37:6b28%en0:59302
    26.02.13 15:31:21,021 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:32,079 kdc[2321]: Got a canonicalize request for a LKDC realm from 192.168.178.32:59306
    26.02.13 15:31:32,079 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:32,080 kdc[2321]: Got a canonicalize request for a LKDC realm from fe80::426c:8fff:fe37:6b28%en0:59307
    26.02.13 15:31:32,080 kdc[2321]: Asked for LKDC, but there is none
    26.02.13 15:31:32,214 screensharingd[83904]: Authentication: SUCCEEDED :: User Name: Administrator :: Viewer Address: 192.168.178.32 :: Type: DH
    Apparently there is something seriously wrong with the Kerberos local data cache:
    sudo ./checkLocalKDC
    krbtgt/LKDC:SHA1.F0454A755D0C818D04161E8547E9D485D004F224@LKDC:SHA1.F0454A755D0C 818D04161E8547E9D485D004F224 doesn't exist, are you sure LKDC:SHA1.F0454A755D0C818D04161E8547E9D485D004F224 is a realm in your databaseThe kadmin check failed.
    configureLocalKDC did not fix this. There are Kerberos config files but I cannot determine if they were created before or after starting any of the services.
    sudo ls -l krb5kdc/
    total 48
    -rw-------  1 root  wheel    61 21 Feb 19:33 acl_file.MARVIN.DOMAIN.DE
    -rw-r--r--@ 1 root  wheel   330 26 Feb 20:17 kdc.conf
    -rw-------  1 root  wheel  4555 20 Feb 19:24 log
    -rw-------  1 root  wheel   111 20 Feb 19:24 m-key
    -rw-------  1 root  wheel    78 21 Feb 19:33 m_key.MARVIN.DOMAIN.DE
    sudo ktutil list (limited to vnc)
    1  aes256-cts-hmac-sha1-96  vnc/LKDC:SHA1.F0454A755D0C818D04161E8547E9D485D004F224@LKDC:SHA1.F0454A755D0C81 8D04161E8547E9D485D004F224       
      1  aes128-cts-hmac-sha1-96  vnc/LKDC:SHA1.F0454A755D0C818D04161E8547E9D485D004F224@LKDC:SHA1.F0454A755D0C81 8D04161E8547E9D485D004F224       
      1  des3-cbc-sha1            vnc/LKDC:SHA1.F0454A755D0C818D04161E8547E9D485D004F224@LKDC:SHA1.F0454A755D0C81 8D04161E8547E9D485D004F224       
      1  aes256-cts-hmac-sha1-96  vnc/[email protected]                                                                         
      1  aes128-cts-hmac-sha1-96  vnc/[email protected]                                                                         
      1  des3-cbc-sha1            vnc/[email protected]
    The Kerberos part of the server open directory settings:
    dirserv:kerberizedRealmList:availableRealms:_array_index:0:dirNodePath = "/LDAPv3/127.0.0.1"
    dirserv:kerberizedRealmList:availableRealms:_array_index:0:realmName = "MARVIN.DOMAIN.DE"
    dirserv:kerberizedRealmList:defaultRealm = "MARVIN.DOMAIN.DE"
    So far all fits AFAIK and the domain is also correct.

    After a night of experimentation, I found a workaround but do not know if this simply avoids Kerberos authentication or what is going on.
    It can be a domain problem except for the checkLocalKDC error that needs to be fixed anyway.
    Above I used the server occurrence in a Finder window, which I presume takes as a name marvin.local.
    Then I used a Go to Server vnc://marvin which worked without a Kerberos error. Also marvin.fritz.box (router) works fine.
    marvin.local looks up the machine via Bonjour, right? Can this be the reason for the difference in authentication?
    My domain setup is likely illegal at the moment:
    local DSL router does the DNS/DHCP for local devices
    server marvin has its own dns for marvin.domain.de (reason below) alone and otherwise uses the router dns
    domain.de is a registered domain (mine) with fixed ip and server behind
    Reason: the domain.de server will be replaced by a DynDNS provider forwarding any request to my dsl router, which acts a firewall and port forwarder.
    So my reasoning was that the new server marvin should be in domain.de as from the point of view of the internet, it is the machine at domain.de. Except that during setup and tests, it is not.
    The client accessing marvin however has no idea about marvin.domain.de! It uses the router as the dns.
    If anyone has done a similar setup (server behind router-ISP-DynDNS), I would appreciate examples how you setup the dns such that the server acts properly from the outside world of view.
    And yes, there is a MX at domain.de and SMTP requests will be forwared to marvin also.

  • Strange Permissions problem when creating new Open Directory user

    I just set up a mac lab to authenticate to an Open Directory server which also stores home folders. All of the initial users I created work fine, there were about 50 users that I set up. When I added a new user this morning though, it would not allow him to access anything within his home folder (i.e. nothing worked)
    I went back to the server and took a look at the Users share and noticed that when his accound was created, instead of setting the owner of the folder to his username (xxx123) it was set to his userid number (1024). I did a chown on his directory to his username and he was then able to access his home directory from the clients.
    I realize I found a fix, but I would prefer to not have to do this every time I create a new user. Why is this happening?

    Have you used the "Role" drop-down to "SYSDBA"? - if not, you get the ORA-01017 error.

  • My 808 got screen and camera problems. I need new ...

    My 808 got so many problem..the camera did not working well and the screen has problem..
    The camera problem when recording the video, i used to use touch to focus, but the when listen to the video the weird sound was produced while i focused on something..the screen has problem when looked at the dark pictures especially on grey colour...it was not the noises but it the screen problem..
    Please Nokia i need new replacement..i just used this phone, and dissapointed with this..
    I bought this phone for the camera, if the camera didn't working well, what the point i bought this phone..
    Please one again Nokia, I NEED THE NEW REPLACEMENT..

    @Rafi808
    Have you installed any third party applications to account for the sound of the continuous auto focus (CAF) mechanism?
    You probably need to visit Nokia Care facility so that device can be reset to "factory settings" and completely re-install device software, before pointing towards hardware issue with camera module itself.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Strange "camera shutter" sound on form submit and screensaver activation

    My MBP has recently starting making a sound that I can only liken to a camera shutter when my screen saver activates. It's not the sound that the photo booth shutter makes, but is strange "shhhh-TINK" sound that makes me worry about the future of my display. At first I thought it only happened when my screensaver came on while on battery power, but now I am noticing it just about any time the screensaver comes on, and over the past few days, it's been happening when I auto-fill forms using 1Password.
    Best,
    Bill

    I have created a power point with some sample images to show what I mean, slide 4 demonstrates this problem
    http://jeremyragsdale.net/jsfissues.ppt
    I think what is happening is that when the JSF Lifecycle builds the server side representation of the control tree it is for some reason duplicating these controls, I am not farmiliar enough with the Lifecycle to know exactly why???
    Any thoughts?
    Thanks
    Jeremy
    Edited by: salsipius on Feb 17, 2009 8:07 AM

  • I have a problem when iPhone 5 includes the camera in the dark on the screen appear mlenki point that wink. what is it?

    I have a problem when iPhone 5 includes the camera in the dark on the screen appear mlenki point that wink. what is it?

    I still don't have any idea what caused the problem. It didn't go away when I re-synced. However, when I completely shut down the iPod (64GB Gen4) by pressing and holding the ON/OFF button until it gave me the red 'slide to turn off' control, and then rebooting it from scratch the problem went away.
    It looks like there was some conflict between the system and the app that is going to be quite difficult to find. If it happens again I'll try to be more observant of the conditions and report more information.

  • A strange peeb sound when unlock the screen!!

    Hi all,
     Recently I have been gfacing some problems with my Z1 phone. I purchased 5 months ago.
    1- Sometimes when I unlock the screen I got a strange peeb sound which last for few seconds. I got this 2-3 time a week!! and lately i got the same sound when I lock the screen!!
    2-Yesterday when I tried to start camera I got black screen!! I tried to reopen the camera app sevral times but same problem. When I restarted the phone the camera app opened successfully. Why this happend?
    3- Lately when I recive a call and try to answer it by sliding the screen, the screen hangs and stuck there fror 5-10 seconds!!! and the call keeps ringing, it really annoying!!!
    In general i got no problem in other apps and phone features its only the Camera app, when reciving a call and when locking/unlocking the screen..... Any advice I will appreciated?
    Thanks..
    NIggy

    I would suggest using the phone in safe mode,see if the same occurs:
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • I am having the problem when trying to take a panorama picture.   It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i  hold the phone straight up and down, so that camera is at the top

    I am having the problem when trying to take a panorama picture. 
    It may only take the first frame or doesn't even start at all when I press the shutter button.
    even though when i  hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
    This problem is irritating me....?

    To take panorama
    - ensure that the panorama option is on
    - press the shutter button once
    - you will see a line with an arrow
    - move around in a circle  ( I keep the camera steady and turn myself around in a circle)
    - as you do this you will see the arrow moving across the screen as it captures pictures
    - at the end of the capture, you will be able to see your panorama picture
    I hope that this helps, do report back.

  • I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

    I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

    Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
    Good Luck.

Maybe you are looking for