Strange characters in output when using

We are using xsql and xsqlrequest class
when I use xsql I get the following result
Media Type: VCCD1
Price: 3708.72
when I use XSQLRequest I get the following result
Media Type: VCCD1
Price: 3708.72B B
B: This character is coming out of nowhere.
We are using weblogic5.1
The following code also introduces these characters in the output:
private XSLProcessor XSLProc = new XSLProcessor();
XSLProc.processXSL(xsl, (XMLDocument)doc, new PrintWriter(out));

Does your stylesheet have an encoding="..." attribute in its <xsl:output> ?
Are you using 2.0.2.9 version?
Thanks.

Similar Messages

Characters chopped off when using 'ps -ef'

Hello all:
When I monitor a java process, I use this commond:
ps -ef | grep MyJavaServiceit appears that MyJavaService has a long jar file list prepended as the classpath, the above command didn't show all the file names on the console - it's chopped in the middle.
Is there a limit of the numbers of the characters shown when using ps -ef | grep someProcess ?
Thanks,
Johnny

ps -ef | grep MyJavaServiceThere is a system limit on line length, check with:
# /usr/bin/getconf LINE_MAX
2048LINE_MAX: maximum number of characters that a utility can accept as an input line (either from the standard input or a text file) when the utility takes text files as input. This number includes the trailing newline.
Are you piping this through a pager such as less(1)? The ${LESS} environment variable can control whether long lines wrap or truncate.
What terminal emulator are you using? These can also be set to wrap or truncate long lines.

Spacing between characters too large when using line justification !!!!

Dear friends,
Since the first time when I have used Pages I noticed a somewhat annoying feature: Sometimes when I use line justification (left and right) the spacing between the characters increase substantially. Sometimes the spacing is ridiculously large. I guess that I have mad something wrong, but I do not know what. Can someone give me a hint what I should do to overcome this irritating aspect?!
Thanks in advance
LJ

There is no doubt that Mellel is a much better application than Pages in a lot of areas. It has been around for longer, it is more mature and it is actively maintained. Pages is of course better in a lot of other areas - and there is room for both on the market.
Mellel handles hyphenation in a much more advanced way than Pages and it has support for example for soft-hyphens, editable hyphenation dictionaries and hyphenation zones - something Pages lacks.
When it comes to the large space between characters, however, I cannot say that Mellel has invested a lot in making it look good. They just chose the simplest solution, just like MS Word, to increase space between words - not between characters. They even use this as an example of something ugly in Mellel's own user guide: "For example, the following text is fully justified but not hyphenated. The spaces between the words look wide and make the text look quite ugly."
As mentioned before, in some cases increasing space between words is the most pleasing solution to the eye. In some cases adding some space between characters is more pleasing, and that is the reason why Apple went to the extra trouble of adding that functionality. In many cases, it is not obvious which way is best, and people will have diverging opinions.

Disable print output when using bapi BAPI_GOODSMVT_CREATE

Hello,
I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
I wish to prevent the print output of the documents created by the BAPI.
Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
Is there a way to disable printing ONLY when using the BAPI?
Thank you very much.

Hi,
We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
In your case Print is coming automatically or user is taking the print !!
Regards,
Dhanush.

There is no printer output when using the PrintOut method

I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
And when the output is directed to the screen, we can see the report.
Could someone give me an idea of what is the problem?
Thanks,
Isis
SP - Brazil
The code used is below:
                   Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
                   rpt.FormulaSyntax = crCrystalSyntaxFormula
                   rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
                   rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
                   rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
                   ' ... Some lines to compose the selection formula
                   rpt.RecordSelectionFormula = Cond
                   ' To evaluate the image length:
                   Arq = rsTMP3!FT_Arquivo
                   ImageScaling = FatorDeReducao(Arq, "F")
                   ' To reduce the image length:
                   AchouOLE = False
                   For Each oSection In rpt.Sections
                       For Each oObject In oSection.ReportObjects
                           If oObject.Name = "PictureFoto" Then
                              Set oOleObject = oObject
                              AchouOLE = True
                              Exit For
                           End If
                       Next oObject
                       If AchouOLE Then Exit For
                   Next oSection
                   With oOleObject
                        .Suppress = True
                        .XScaling = ImageScaling    ' 0.5 = 50%, 1 = 100%
                        .YScaling = ImageScaling
                        .Suppress = False
                   End With
                   Aguarde.Show 1
                   If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
                      rpt.PrintOut True              ' <<<---- Here using true or false nothing happens
                   Else
                      PrintRPTtela rpt, "Fotos"   ' <<<--- Here it works fine
                   End If

Hi Isis,
Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
You'll find the distribution files for your app also from that same download area.
If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
Thank you
Don

2 Apple TV's and no sound output when using AirPlay/mirroring?

Hi,
Bought my first apple tv and when air mirroring was able to go to my system preferences and choose sound output for it and it worked beautifully when I wanted to play a movie on my computer and send it to the TV. Bought a second apple tv for the bedroom, both are connected over wifi. Using Mountain Lion on my iMac. Now it won't play any sound on either and will not let me choose which apple tv in system preferences - sound. Any help would be appreciated
Sue
I have tried turning Apple TV on first, then choosing sound output before turning on air mirroring. Problem is it won't let me choose, stays on internal speakers.
This fix won't work for me.

Might I recommend the following sample code instead?
[http://www.jsresources.org/examples/MidiNote.html]

Noise on audio output when using the power adapter

I'm a musician and use my mid-2007 MBP 15" in my live rig. When I use the power adapter, I hear a buzz, sometimes accompanied by a slightly louder buzz that cycles on & off about 1x/second. There are a few weird things going on here:
1. The buzz does not happen all the time. That leads me to think it may be noise in the AC line that the adapter is plugged into.
2. The noise is heard when I use both the built-in audio output AND an external USB audio interface.
In any case, when I disconnect the power adapter and run my MBP on battery, the noise goes away completely. I can probably do this on most gigs, but I'm a little nervous since I run a FW drive, an external USB audio interface, and my midi keyboard (powered by USB) so I am putting a little heavier than usual load on the MBP's battery.
As I said, this may be a noisy AC line. Another guess is that it's the PMU inducing noise into the audio circuitry. I'm hoping a simple AC line filter can help me but I thought I would ask here first in case anyone else has dealt with this. TIA for any help!

I had a similar problem and fixed it with a $5 universal travel adapter. Yours might be different but here's my situation. Try it for little cost and see if it works.
I'm also a muso with an iMac running external KRK speakers via USB Mbox2. Previously I had a Macbook Pro and the same audio problem. I've been putting up with a very low volume, high pitch noise until now. I simply plugged the Mac power cord into a universal travel adapter which then goes into the wall. For Aussie users there is an adapter on ebay that will allow a 3 pin Aussie plug to go into female side and has a two pin Aussie male on the other. For US users you can probably get the same although there is a 59c product that will do the trick called a ground lift adapter. Applecare actually agreed this was the best fix and confirmed there would be no problems with power supply or Mac performance. What a gem ! God knows I've looked into all kinds of alternatives that could have cost hundreds instead of $5.

[SOVED] Bizarre Output When Using ls -al

So I've been mounting a remote filesystem using SSHFS to a directory called "remote" in my home folder.
Today, I tried mounting that same folder and I got this error message:
fuse: bad mount point `/home/user/remote': Transport endpoint is not connected
Hmm .... let's do an 'ls -al'.....
$ ls -al
-rw------- 1 user user 8908 Dec 2 14:01 awesomefile.txt
d????????? ? ? ? ? ? remote
-rw-r--r-- 1 user user 817920 Jan 15 11:08 dwarfporn.avi
Odd. Trying to delete or chmod the 'remote' folder as root gives the following error:
# rm -r remote
rm: cannot remove ‘remote’: Is a directory
# chmod 777 remote
chmod: cannot access ‘remote’: Permission denied
What's going on?
Last edited by lxkraken (2015-01-19 21:59:27)

WorMzy wrote:The question marks in ls' output signify that ls can't get information about that folder (in this case for the same reason -- it's not connected).
Thanks!
Doing an 'fusermount -u ~/remote' brought everything back to normal. I remember doing an 'fusermount -uz ~/remote' the last time I dismounted the remote filesystem, which is likely the cause of the strangeness (lazy unmounting).

Low output when using Akai MPK49 controller

I'm completely new to Logic so I appreciate your taking the time to read this.
When ever I add a software instrument track and use my Akai MPK49 controller to control the instrument, the meters show that I have plenty of signal coming in, but the output is extraordinarily low. I can't even hear the instrument when I play other tracks with it! The Akai has TERRIBLE documentation so I'm not sure if I've screwed something up there as well. I just wanted to make sure that I wasn't missing something in Logic.

hi. one trick to try:
1. look to the right of the mode wheels, you will se the "performance controls" section in orange.
2. press the FULL LEVEL button. this should give you zero velocity sensitivity, but up your output.

No output when using a USB interface / real instrument or mic

Hi, I'm a Logic noob. I can get input and output from software instruments, but when I'm using my interface for my guitar or mic, I don't get any output. I can tell I'm getting input because the input bars jump around when I play, but I just can't seem to get any sound. I've searched through a couple other threads, but they seem to address changing output to hear during recording. Any advice?
Thanks
MacBook
M-Audio Fast Track USB interface
Creative monitors plugged into MacBook

When you select the M-Audio as audio hardware the Output goes to it!
If you want to use Mac internal audio then open the Audio Midi Setup (it's in the utility folder) and create an aggregate device.
cheers
rob

No sound from optical output when using hdmi/dvi cable

I am trying to connect my apple tv2 to my B&O Beovision 7. I have used an HDMI to DVI cable which is working fine for the picture; but obviously DVI does not carry sound. I have therefore connected an optical cable to the digital optical output on the apple TV and put this through a converter to digital coax, which then goes in to the TV. I know the optical cable / converter set up works fine as I have tested it on my sky box and it works fine. But I get no sound from the apple TV - any ideas?

I hav exactly the same problem... Did you resolve this??

Strange error: gpib error when using DAQmx

Hello
I try to out put a single puls using a counter on a PCI-6602 Board with the attached LabVIEW code.
Strangely I get the following error message:
"Error 3 occurred at an unidentified location
Possible reason(s):
LabVIEW: Internal error. Wrong memory zone accessed.
=========================
NI-488: GPIB Controller not addressed correctly."
Why do I get an GPIB-Error, although I don't even use a GPIB-Card?
Attachments:
ShortTrigger3.vi ‏23 KB
ErrorMessage.GIF ‏9 KB

Hello!
The problem is coming from the simple error handler.
The Simple Error Handler cannot decide if plots error + warnings, or only errors.
You cannot put your enumerator to the simple error handler, it works only with the general error handler.
In your program you are giving to the simple error handler a number 3 as error code. The VI convert this error number 3 with the error GPIB you received.
You should so replace the Simple Error Handler.vi with the General Error Handler.vi
Best regards
Ken

No output when using ODA in WS Cluster

I am trying to dynamically assemble multiple documents using the new On Demand Assmebly module in a WebSphere cluster with a load balanced cluster of web servers in front of LC. While the process calls the ODA successfully, the output document is empty. Yes, I am building and passing a DXFA file to the ODA.
This is the same behavior I experienced while running the "old" DDG solution accelerator in the same environment - although the DDG would work approximately 50% of the time, depending on which server was being hit between process steps. BTW - the DDG also functioned correctly in a single server enviroment. (ok - the Turnkey on JBoss; which I would certainly expect to work)

While the URL for ODAWebApp was originally pointed at the web server/load balancer - I have changed it to point to one server on the cluster. Additionally, to aid in testing, we have disabled one of the app servers on the cluster to force all activity on the same server. (it was the only way to get the old DDG to work consistently) Regardless, after changing the URL, the ODA still does not produce any output. The XDP's are currently on a file system. I have not tried retrieving them from the repository (the old DDG could not retrieve them from the repository in our cluster, so we copied the XDP's to a file system on shared disk ) I can change the script/DXFA to retrieve the XDP's from the repository to see if that works. The XDFA file is also the same exact file (built with the same script) that we use with the DDG. I will examine the tech notes again to see if there is a difference required. We have recycled that server and still get the same result. I will install the ODA debug later and report the results.

Cannot export query output when using UNION ALL

Hi
I can run a query in SQL Developer 1.5.5 and if it's a SELECT statement it works fine, but if I output the result of several SELECT statements using UNION ALL after some 10,000 records the SQL Developer crashes and it generates a file whose size is 0 kb
Is there a workaround for this??
Thanks and Regards!
Isaac

Should be fixed in the upcoming 2.1... you can try the RC1 also...
Regards,
K.

Bogus output when using oh-my-zsh (standard) on urxvt-unicode ?

Hi,
see https://github.com/robbyrussell/oh-my-zsh/issues/770
the weird thing is, this only happens with rxvt-unicode (official package), and even when invoking the right print call as explained in the urxvt documentation.

Same here, but using the AUR package rxvt-unicode-patched

Strange characters in output when using

Similar Messages

Maybe you are looking for