Strange colour spots (red & green) appear after RAW files converted to JPEG, anyone know how to fix it?
Strange colour spots (red&green) appear after RAW files converted to JPEG, anyone know how to fix it? Thanks.
I use "Export" function to convert the picture from RAW format to JPEG format, resolution 240 pixels per inch. Strange red dots appeared in the area supposed to be dark grey, as per the picture below. The red colour does not appeared in the original RAW picture when viewing from Lightroom, only exist in the JPEG it created. Any ideas how to fix this? Thanks!
Similar Messages
-
My iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this I keep getting error message 3014 ?
i dont know but you went through all of this
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times to no avail. There are no other problems with w/ other CS4 programs, they all have the normal system font. I can't figure it out. Thanks!
Funny fonts issue in PI etc.,
http://kb2.adobe.com/cps/405/kb405153.html
Fonts in Dreamweaver panels display incorrectly
http://kb2.adobe.com/cps/138/tn_13862.html
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
Hi,
can any one tell me why when I sync my Iphone to my Mac all my Calendar to do´s appear as though due for one hour later than they show in my computer? Does anyone know how to fix it??Not simple enough. Please read the original concern.
The issue is not "getting music to the new machine" or "authorizing the new machine" or "transferring purchases from an idevice". The issue is that after doing all those things, even creating a backup using the new iTunes/Mac, syncing my device with the new library erases all the app data from the iPhone, as well as folder structure and page layout. Music is expendable in this situation as it's just a matter of moving the files around. (Which I did before I ever started this exercise.)
The problem is that everything from email accounts to folders are lost when I sync the device with a new computer. I tried this on my iPad first and spent a good deal of time re-arranging everything and getting all the data back. The pictures are just gone. Good thing I backed them up on the old PC.
It won't be as simple on my iPhone as I have a ton of stuff on it and can't afford to lose anything. Some of the data is gave saves and such, but other things are more important. And I don't want to lose those game saves either. -
My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?
Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)
I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.
-
IPod 1st gen does not work after upgrade to iOS 3.1.3. Does anyone know how to fix this?
I upgraded my iPod 1st Generation from 1.1.5 to iOS 3.1.3. through iTunes. After it went through the upgrading process, I received the error message, "iPod could not be restored. An unknown error occurred (6). I went to another PC and was able to restore to the original version. However, I would like to be able to upgrade to 3.1.3 so that I can buy some Apps that requires 3.1.3. Does anyone know how to fix this or have any suggestions? Thanks.
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
http://support.apple.com/kb/TS3694#error6 -
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
I plug my iphone 3gs into my laptop and it no longer syncs with my iTunes. I've tried all the trouble shooting methods and nothing works. My iPhone doesn't appear on iTunes or under "My Computer." Does anyone know how to fix this?
If AMDS is running, you are using a USB port directly on the computer and not a hub, you have disconnected other USB devices except keyboard and mouse, you have completely uninstalled and reinstalled iTunes as described in http://support.apple.com/kb/HT1925, You have tried cleaning the connector on the bottom of the phone, you have tried a different cable, you have installed the latest USB drivers for your computer, you have disabled your antivirus and firewall, you are running as an Administrator account and you have tried creating a new user on your computer and connected when logged in as that user then you have exhausted my knowledge. The only other thing to try is a different computer. If it isn't recognized on a different computer you have a hardware problem. Good luck!
-
I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?
First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R. -
Error with universalis responsive template. Prices appear with 163; code before them instead of £ sign. Does anyone know how to fix this problem?
Error with universalis responsive template. Prices appear with 163; code before them instead of £ sign. Does anyone know how to fix this problem?
-
my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help
If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?
Hi Charles...
Try re downloading the iBook > Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When i click on a song to play or drag it to a playlist an exclaimation mark appears next to it. a message says , could not be used because the original file could not be found. does anyone know how to fix this problem?
1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary
Maybe you are looking for
-
Hi, I need to display the MON-YYYY format date in a SQL Query, Query Condition is like this If I run the query today it must display starting from May-2012 to November-2012 ( i.e 6 Months interval ) If I run the same query next month it must show Jun
-
How to get ADF UI Component value in managed bean
JDev version 11.1.1.1.3.0 I have written a managed bean method and calling that method on valueChangeEvent of a Select boolean Checkbox ADF Component. I want to retreive the value of some other component located in the same page as the checkbox. I ne
-
Alpha channel showing in preview
If I import a .psd file that has an alpha channel, it shows in the preview. Does anyone know how I can eliminate the alpha channel in the preview. iView has a specific option for this but I can't seem to find anything similar in Aperture.
-
Creating New Sales Order with Total=$0.00
B1 is not allowing me to save a Sales Order with a DocTotal of zero. Is there a setting to allow this? Something I missed in admin, maybe?
-
Multiple accounting doc in single file - PROXY
Hi, I am reciving multiple accounting doc in single file.. MT_INPUT acc_doc1 acc_doc2 I need to send it seperately to PROXY. MT_INPUT acc_doc1 MT_INPUT acc_doc2 proxy needs to be called multiple times..... how to do this? Regards, Akshay.