Strange Constant HD Access Sounds for no reason??

Well, i just upgraded my system From....
MB: Asus AM266-D
CPU:  Dual Athlon MP 2400+
RAM: 1 Gig Ram
Controller: Promis SATA controller,
HDs: Western Digital Raptor 74gig SATA
       Maxtor 300gig SATA2
To:
MB: Platinum powerup V2
CPU:Core 2 Duo EN6600,
RAM: 2 Gig crosshair 800mhz, (pc6400)
PS: Enermax liberty 620w
VGA: Ati X1950XT (saphire)
HD: Same as Before
Problem... Strange Very Annoying Constant HD Access.
First everything is all good, so i boot into my previous windows install from my other system, it updates all the drivers and i notice the thing is messed up, the HD access is slow and seems like its working harder than usual.... Turns out this was due to it being in IDE Mode, so i did a re-install of windows anyway in ACHI or whatever it is and installed the proper drivers, for the Intel SATA controller in AHCI.
Well, that definatly fixed the initial problem, but now, when the PC is completely IDLE, 0% CPU usage, No System restore, and nothing obvious using preformance monitors i setup, the HD is being accessed and its a constant sounding pattern, over and over and over every 3 seconds.... and its very very annoying.
So, for "I'm a potty mouth"s and gigles, i try a diffrent controller, the other sata controller, and same thing (with a re-intall of windows) then, i tried my old promis controller, installed driver, new windows install just incase, no repair, Same thing!!!!!!!!
Windows shows NO hd access in any of its preformance monitors and 0% CPU usage during this time.
Its like somthing is happening in the background, but not at the windows level, but at the hardware level????
I still havent ruled that out 100% though, but when i install linux Next, We'll see...
Windows in safe mode does the same, i've excluded a number of services etc... still the same thing.
This never happend once in my life, or on my previous hardware.
Also, i've even tried installing windows on my secondary drive, a SATA 2 Maxtor 300gig, NCQ... same thing, except its much quieter... so its not noticable, but its still there. On the WD Raptor though, its noticable and very annoying... especially when the PC is suppose to be IDLE, lol......
I've kept my windows install on my Maxtor, since its unoticable, and i put my raptor as a slave for now, but strangely enough, the raptor still makes that sound pattern during access and for 5 mins after, then it stops.   When windows was installed on it, it would do it for 20-30 mins then stop eventually only if you left it IDLE and dont do anything on the PC.  It even does this in the windows XP setup, lol.... like when entering the serial number, its all idle, and it does it.  its annoying as hell.
Also, the HD access LED does light during this access, but i see no simular patterns from HD access of other programs at all. and like i said 0% idle cPU usage.
So, WT is happening? Anyone experience such a weird problem?? anyone with this Board and a Raptor 74gig running windows XP have this issue?????????
 Theres not really any preformance issues i beleive, since i got a 72xxx score in PCMark, and the HD's speed surpased even the other PC's in my PC's class that got right marks, even one running quad core.... but its the sound, its just driving me nuts, if i couldent hear it, i would be set, lol......i wouldent attempt to dampen the sound given how hot those raptors can run.  only thing i havent tried were, Linux, and trying the Raid Driver instead of AHCI. 
is there any tools for monitoring HD access on the HW level? anything? any ideas?
Thanks for any suggestions.....
FYI, the sound is like ("errrrr", "chick", "chick"....wait 3 seconds, repeat)
the "errrr" is a solid consistant sound for about a full second, the other sounds after it seem more like normal sounding HD access, but it goes in that pattern.  In IDE mode, its just insanely retarded... everything that loads does a solid consistant agressive sounding HD access.   using my previous MB, CPU, controller, it never did any of this at all. 

 Hello!  Thanks for suggestions... the power is all good though, thats for sure.  I also mentioned the PS above... its New too.   
PS: Enermax liberty 620w.   For cables, i have tried with the legacy power connection and SATA power, plus a change of data cables.
 I ran the WD diagnostics tool checker, the drive is being a secondary now.  No bad sectors or problems writing 0's to the drive, all reports good anyhow.  it might be some sorta power saving issue like you mentioned.  I also have the jumper on the HD still at default, which i believe is set to no spread spectrum clocking, like it aways was.  There is a setting for power management, but it isn't on that jumper.  the jumpers and power management in the bios are the only things i haven't tried, but thats next.   
 Also, i updated to the latest bios version, just to see.    I wish there was some tools to monitor the commands + data going to the HD from the controller, that may narrow things down a bit.   I'm a coder and its annoying troubleshooting these odd ball problems without proper tools, hehe.
i'll try the power stuff and see what happends

Similar Messages

  • Lenovo L420 THINKPAD starts with a constant long beeping sound for atleast 1 min.

    From few days my laptop starts with a long beeping sound for atleast more than 1 min, then comes a boot order option. I have no idea whats wrong with it,last time when it happened i had to change my harddisk. Guys anyone with expert ideas please help me,and as fast possible.

    Nope. Not using a dock at all. I have to mention tho', that the machine already visited an authorized service. The motherboard was replaced, because it didn't recognise the power brick and refused to charge the laptop.
    I'm guessing they didn't put it back together properly. Since I posted I checked the cpu / gpu temps and the cpu temps rise to 80-90 C just when I do a simple operation like delete a larger folder. I tried to turn on bluetooth to copy some stuff from my phone yesterday and for some reason it acted like i pressed fn+f4.  Went to sleep. I pressed fn+f5 just for the record, but after a few times doing this, I found that no matter what fn combo I press it goes to sleep. I have to press the power button again to bring it back. Started playing piano on the rest of the keyboard and same thing. Going to sleep. The lcd went in off mode and disappeared from both the bios and device manager. I was back at square one again seeing my desktop only on the external monitor.
    I suspect the tech guys who fixed it didn't put something back right + the fact that the cpu is so hot lets me believe that the thermal paste was not applied right.
    I still don't get why all the hardware self test pass. Maybe I should do a stress test? Or should I just send it back to service?
    Lenovo Thinkpad T61 __ Lenovo Thinkpad W520

  • I can't delete an itunes account that my xhusband also has on his iphone and my email account as well.  He can read my emails but I can't delete this itunes account because I can't access it for various reasons.  Short of paying apple to delete is a way?

    I still think my xhusband can see my emails on his iphone since I had downloaded an app on his iphone using my itunes account. Now I can't get into this account for various reasons.  Is there any way of deleting this itunes account short of paying apple to do it?

    You can't delete an iTunes accounr/Apple ID. All you can do is stop using it. What you can do is change your Apple ID password, as well as the password for your email account. That will put an end to this.

  • Alert sound for no reason and typing 9's by itself! help!

    this started a few weeks ago.. when im typing in email 9's will show up between the letters I type and when I stop typing .. sometimes 9's will sow up like the key is being held down and my alert sound will sound like Im doing it over and over.. it doesn't always do it.. but when it does it will do it on and off all day until I shut down..sometimes it stops sometimes not.. I have also zapped the pram.. didn't help? any ideas? any help?
    Rebecca T.

    nope thats not whats wrong..I did that all before.. I put it upside down and shook it.. then I did the air thing then the vacuum..its not a stuck key.. and that also does not explain the sound... its doing it again today too the 9's and the should..I had to turn my sound volume off.. what it looks like is this.. I'll9 b9e typ9ng and 999999 wil9l show99 up lik9e this alot. and sometimes it will just go999999999 and longer so I hit the delete key until its stops.. drives me nuts! then the sound I have picked as my alert sound will beep.. ( not when the 9 thing happens but sometimes it may.. but not always..) then it will beep over and over about 10 times then stop... when im not even touching the computer.. Im not a newby to macs.. I bought my 1st one when powermacs first came out. a 7100 a 8100 and the 1st big blue and white g-3 and a laptop to.. one of the silver ones.. I still have all but the 7100 and 8100.. ( I am planning on getting rid of them though) ..Im the one everyone would call for help.. I dont know the new os x very well though... I am a sculptor and painter and I just don't have as much time to mess with the computer... but I know its not a stuck key..I searched the forum and saw one other person had this same problem but with a letter not number and he/ she did the same thing as me.. cleaning the keyboard out.. hers also stopped but Im betting its coming back as mine did... there has to be a reason its doing this..

  • Weird Mario Music Plays for no Reason -- HELP!!!

    Ok guys, I just upgraded to leopard today, and I'm gettin REALLY weird problems. Sometimes, my macbook just plays this weird mario theme like music or this weird buzzing and bird chirping sound for no reason whatsoever. I have made sure that there is nothing running other than finder, yet it is still happening. Also, if it helps, I took a list of all the activities in my activity monitor, so see if you can see anything weird. Here is the list (Now that I think about it, the problem started after I installed the Boot Camp Drivers on my Windows Partition):
    0 kernel_task root 1.8 55 153.13 MB 1.15 GB Intel
    1 launchd root 0.0 3 524.00 KB 586.73 MB Intel
    10 kextd root 0.0 2 1.16 MB 586.19 MB Intel
    11 DirectoryService root 0.0 5 3.15 MB 588.79 MB Intel
    12 notifyd root 0.0 2 484.00 KB 586.18 MB Intel
    13 syslogd root 0.0 4 532.00 KB 587.26 MB Intel
    14 configd root 0.0 3 1.75 MB 587.18 MB Intel
    15 distnoted daemon 0.0 1 696.00 KB 585.59 MB Intel
    16 mDNSResponder _mdnsresponder 0.0 2 2.06 MB 587.89 MB Intel
    20 securityd root 0.0 1 1.94 MB 586.74 MB Intel
    25 ntpd root 0.0 1 844.00 KB 586.12 MB Intel
    26 cron root 0.0 1 636.00 KB 586.69 MB Intel
    28 update root 0.0 1 284.00 KB 585.57 MB Intel
    29 SystemStarter root 0.0 1 664.00 KB 585.61 MB Intel
    33 mds root 0.1 16 71.59 MB 757.27 MB Intel
    34 loginwindow nourezrawji 0.0 3 6.90 MB 873.18 MB Intel
    35 KernelEventAgent root 0.0 2 644.00 KB 585.68 MB Intel
    36 kdcmond root 0.0 2 1,020.00 KB 585.73 MB Intel
    38 hidd root 0.0 1 580.00 KB 585.59 MB Intel
    39 fseventsd root 0.0 10 1.21 MB 592.52 MB Intel
    40 dynamic_pager root 0.0 1 704.00 KB 585.61 MB Intel
    43 diskarbitrationd root 0.0 1 1,016.00 KB 585.69 MB Intel
    47 blued root 0.0 1 2.28 MB 596.83 MB Intel
    48 autofsd root 0.0 1 660.00 KB 585.62 MB Intel
    49 socketfilterfw root 0.0 2 1.40 MB 585.82 MB Intel
    83 vmnet-natd root 0.0 1 252.00 KB 586.15 MB Intel
    87 coreservicesd root 0.0 4 19.70 MB 623.29 MB Intel
    88 vmnet-dhcpd root 0.0 1 208.00 KB 585.93 MB Intel
    90 vmnet-netifup root 0.0 1 152.00 KB 586.64 MB Intel
    93 vmnet-netifup root 0.0 1 152.00 KB 586.64 MB Intel
    97 krb5kdc root 0.0 1 1.39 MB 586.05 MB Intel
    98 vmnet-dhcpd root 0.0 1 208.00 KB 585.93 MB Intel
    100 vmnet-bridge root 0.0 1 376.00 KB 586.70 MB Intel
    101 WindowServer _windowserver 1.1 4 35.58 MB 938.88 MB Intel
    107 launchd nourezrawji 0.0 3 520.00 KB 585.73 MB Intel
    121 coreaudiod root 0.0 2 3.38 MB 594.70 MB Intel
    128 Spotlight nourezrawji 0.0 6 15.66 MB 1.01 GB Intel
    129 UserEventAgent nourezrawji 0.0 2 2.12 MB 844.76 MB Intel
    130 pboard nourezrawji 0.0 1 580.00 KB 586.63 MB Intel
    131 Dock nourezrawji 0.0 3 17.24 MB 930.66 MB Intel
    132 SystemUIServer nourezrawji 0.0 8 12.55 MB 930.07 MB Intel
    133 Finder nourezrawji 0.2 8 28.73 MB 996.32 MB Intel
    135 ATSServer nourezrawji 0.0 2 4.71 MB 637.29 MB Intel
    148 GrowlHelperApp nourezrawji 0.0 1 6.80 MB 912.71 MB Intel
    149 iTunes Helper nourezrawji 0.0 2 2.95 MB 859.89 MB Intel
    155 usbmuxd nobody 0.0 2 1.10 MB 587.12 MB Intel
    157 AirPort Base Station Agent nourezrawji 0.0 3 2.88 MB 907.20 MB Intel
    162 mdworker nourezrawji 0.0 4 7.31 MB 605.34 MB Intel
    192 racoon root 0.0 1 1.01 MB 586.12 MB Intel
    208 AppleSpell.service nourezrawji 0.0 1 3.66 MB 601.72 MB Intel
    237 Safari nourezrawji 0.2 9 95.62 MB 1.01 GB Intel
    244 DashboardClient nourezrawji 4.0 8 40.86 MB 975.07 MB Intel
    245 DashboardClient nourezrawji 0.0 4 12.03 MB 916.85 MB Intel
    246 DashboardClient nourezrawji 0.0 4 9.66 MB 914.64 MB Intel
    288 Activity Monitor nourezrawji 4.7 6 17.07 MB 971.49 MB Intel
    289 pmTool root 1.0 1 1.30 MB 595.68 MB Intel
    I know that there is a lot of stuff, but I really need help. I've shut off sound for now, but I'm really getting confused. HELP!!!

    Hahahhahahahahahahahah!!!!!
    I just figured it out.
    I had made a web clip of Nintendo.com, and apparanty, it was making the sounds. I guess I didn't realize that web clips keep the sounds associated with the webpages they are linked to. In the end, I guess I paniced over nothing, but man, that was WEIRD!

  • So I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    so I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    Hi,
    As you have match, I suggest that you create a new library by holding ctrl whist launching iTunes. Select create new library. Sign into iTunes Store and activate match. You will now have access to your music and will be able to stream your music.
    Options : get a new external drive formatted for mac and either download music from match or copy music from old drive to new one. Alternatively you could reformat old drive and download music from match - I would not be comfortable using this option as it means erasing drive before being able to use with mac.
    Jim

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on both accounts. how do I take the money and put it on one account?

    I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on the new account. How do I take the money and put it on one account? 

    You can't merge Apple IDs.  What you could do is set up your phone to use the same iCloud accout you are using on your Mac.  To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off.  When prompted, choose to keep the data on the phone.  When everything is off, scroll to the bottom and tap Delete Account.  Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc.  When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.

  • I have Itunes on my PC. For some reason, I now have only one song in my library.  I can still access my songs through my hard drive but they don't show up on Itunes anymore.  Any idea how I can fix this?

    I have a lot of songs in my Itunes library.  However, for some reason, they have disappeared and I only have one song left.  When I check under My Music, I can see all the songs but can't access them through Itunes.  Any idea why this happended and how I can fix it?

    I think I fixed this problem a few years ago by literally copying and pasting all my audio content into the iTunes library folder. I can't remember what is called of the top of my head and I don't know if this will still work.

  • I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

  • My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

  • HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

    Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
    Many thanks
    Anthony

    Try this Discussion...
    https://discussions.apple.com/message/18783684#18783684

  • I have an old apple id that i havent used for years. For some reason i have updates on my mac i cannot do unless i sign onto that old account. It uses an old e mail account i no longer use or have access to. How can i get to do these updates?

    I have an old apple id that i havent used for years. For some reason i have updates on my mac i cannot do unless i sign onto that old account. It uses an old e mail account i no longer use or have access to. How can i get to do these updates?

    its very specific.
    If you are seeing the old Apple ID with regard to this Mac, then it would seem that somehow you have incorporated the ID in the setup of this new Mac.
    Iphoto i use never used imovie.
    If you began using iPhoto without having Accepted it into your Apple ID, then that would explain why you are unable to update the app. If any of the iLife apps are used without Accepting them into your Apple ID, the ability to accept them will lapse and you will not be able to update them.

  • For some reason I am unable to access my purchased itunes music from my icloud or from my computer.  I suddenly get this message: say that I the original location for the song cannot be found.

    For some reason I am unable to access my purchased itunes music from the purchased folder in the itunes store or in my icloud.  The descriptions of the songs I purchased are there, but when I attempt to play them it says that the original location of the song cannot be located.  This is so frustranting. How do I get my songs back??

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I changed my I'd and password but for some reason it still shows my old ID and I can't access my app store. Please help

    I changed my apple I'd and password because my old ID was not working, but for some reasons I can not get into my app store with the new ID and pass. Please help

    Anybody can access the App Store - even without an Apple ID.
    What are you saying? You cannot access your purchased apps with your new ID? If you are, that is the way that it works. If you set up a new Apple ID - you can't update the apps that you bought with the old ID. You have to continue to update the purchased apps with the old ID and password since purchases are always tied to the ID that made the purchases.
    If you need to sign into your new ID you can do that in Settings>iTunes and App Stores>Apple ID. Tap th old ID and sign out then sign in with the new one.

Maybe you are looking for

  • How to built my  abap carrier

    hi all  seniors, i am new to ABAP,  could anyone  please advice me  how to  built  my self a good  abaper.To  which part i give more  attention ?                 thanks  & regards                      subrat

  • Auto TO for 102 IM (104 WM)

    I have done production with 101 IM Movt(103 WM Movt) which has crated an entry in WM with st. type 902 and Bin "Production order". After this, I have transffered to bin no S-001 with 999 WM movt. But when I am doing 102 IM movt(104 WM Movt) , system

  • Polling application and System.gc()

    I discovered that a polling AIR application slowly uses more and more memory, probably because of the garbage collection algorithm. These two screen shots show the memory usage displayed in the Flex profiler of an application that polls XML data from

  • Windows 8 Internet explorer only- an error occured

    I am using windows 8. NOT 8.1. I have tested flash player in firefox and chrome. They both work fine. The only browser with a problem is, of course, microsoft's internet explorer. I have the latest version of everything. I have tried uninstalls and r

  • How can we restrict Key Figure in the BI System

    Hi All, Can any one explain How can i restrict key figures in BI system. So when i create a query a specific user  can only execute it if a specific key figure is a part of query otherwise he is not allowed to execute a query. For Example: A user TES