Strange crash with shrill noise - anything to worry about?

A few minutes ago I was moving my cursor across the screen and accidentally clicked on the garageband icon in my dock, which I haven't used in over a year. The program goes to load and while it's loading, my computer starts emitting this loud, shrill sound while freezing up. It allowed me to open a few new windows but as I was trying to force quit Garageband (which eventually loaded up), the computer froze. I turned it off and it seems fine now but it was a strange incident...anything I should be worried about now?

Hi Jiggymike!
Run Repair Disk.
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
You should also run the Apple Hardware Test.
Post the results.
ali b

Similar Messages

  • Is failure to install "N-Mon.kext" anything to worry about?

    When I've done the latest update I get the message (appearing twice) that N-Mon.kext can't be installed and I should contact the vendor.
    This has happened each time I've updated on two separate bootable partitions I use.
    It has not happened on a fresh OSX install on a third partition that had no additional software and where I went straight from 10.6.3 to 10.6.6, only on the ones that had a version of 10.6.6 that was downloaded recently and lots of software.
    Is it anything to worry about..? Everything (so far) seems to work ok.

    Uninstall VUZE
    http://discussions.apple.com/message.jspa?messageID=12119966

  • Is this anything to worry about?

    Using Javascript to apply XSLT when importing XML [using Mac OS 10.6.4, CS5 7.02], and all seems well. But when I "sort" using the XSLT, I get the message "International sorting unavailable on this system - sorting natively. Line: 7, Column: 12".
    It seems to work OK, but that looks like an error message. Is it anything to worry about? Is there any easy way of avoiding it?

    If it appears to work, then I shouldn't worry too much about it. You can try adding a "lang=" attribute to the xsl:sort command, so the XSLT processor won't worry about what you mean (see http://www.w3schools.com/xsl/el_sort.asp). I think the message is to remind you that there might be a difference between international and 'native' (system?) sorting.
    The lang= attribute accepts international language abbrevs such as "en", "de", "fr", "en-GB", and "en-US".

  • IPod makes clicking noises, but works normally. Anything to worry about?

    As i've been using it i've noticed my ipod has been working fine for the longest time, but reciently there are 2 things I notice that happen occasionally.
    1. Once in a while when I plug an ipod into the comptuer it freezes, though this hasn't happened in about a month now.
    2. Sometimes I hear clicking sounds like what you hear a lot on like older mac laptops that usually occurs when the mac has to process a lot (kind of?)anyways reciently I hear that on my ipod but it hasn't before.
    So I just wanted to know is there anything I should worry about that could happen in the future or will it likely work just fine?

    ive got excatly the same problem, my pod (also had it 3yrs 30gb 5th generation) has started making the clicking noise, i get the apple symbol appear or the sad looking face, im unable to restore it and i think the sad face may mean its a hardware problem from wot ive read on the online support. but i dont know what to do or where to send it to be fixed or if it can be fixed, if you find out how it can be fixed please let me know its doin me head in.

  • Strange crash with Intel FFT in Windows XP x64: only when first starting LabVIEW and opening VI, not when opening VI by double-clicking

    When I use the Intel FFT libraries(MKL), I seem to have a strange crash whenever I start allocating the Intel DFTI descriptors. I call a DLL from LabVIEW 8.2.1, in which these functions are used. I am working on Windows XP x64. This seems like a bug which was present in these libraries, but I got the libraries where the bug was resolved.
    The strange things is that, when I open LabVIEW and then open the VI, LabVIEW crashes from the moment I allocate an Intel Dfti descriptor. But when I just double-click the VI and open it this way, I can run the VI without a crash! I already removed the DLLs in \Program Files (x86)\National Instruments\Shared\MKL\MKL70 to see if they were the cause. But even without them, I still get the crash.
    I know there was a strange crash in the previous version of Intel MKL when calling a DLL and allocating this type of descriptor, so it seems like somewhere LabVIEW still uses old versions of some of these DLLs. But even then, can this explain the difference in behaviour between opening the VI through LabVIEW or directly? And if so, were could I find these DLLs? I've already searched from them everywhere.

    Update:
    - Opening the single VIs directly by double-clicking indeed solves the crash: from then on I can run all VIs using the libraries without any problem. So LabVIEW must do something strange when it is opened.
    - Linking my DLLs statically against the Intel libraries ALSO solves the prolbem. So this seems to indicate LabVIEW loads some dynamic library which screws up everything. But only on x64 systems . This bloats my DLL, but currently I do not see another work-around.
    Anyone has any more ideas? Otherwise I can always submit some test case to LabVIEW support.

  • Strange crash with photos from Picassa

    I came across a problem today that I can't explain. When I download photos from a specific site on picassa and each time i imported them into iphoto it crashed. I received the same photo from the person who put the photos up and it was fine but when I downloaded the photo onto my desktop from Picassa and then dropped onto iphoto it crashed. when i resized the photo in photoshop and saved it it was fine and when i imported a different file, a large tiff file that was fine.
    I'll post a part of the crash log if anyone can see something I can't.
    Thanks
    Command: iPhoto
    Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Parent: WindowServer [62]
    Version: 6.0.5 (6.0.5)
    Build Version: 2
    Project Name: iPhotoProject
    Source Version: 3160000
    PID: 355
    Thread: 9
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000000c
    Thread 0:
    0 libSystem.B.dylib 0x9000ab48 machmsgtrap + 8
    1 libSystem.B.dylib 0x9000aa9c mach_msg + 60
    2 com.apple.CoreFoundation 0x907dcb78 __CFRunLoopRun + 832
    3 com.apple.CoreFoundation 0x907dc47c CFRunLoopRunSpecific + 268
    4 com.apple.HIToolbox 0x93208740 RunCurrentEventLoopInMode + 264
    5 com.apple.HIToolbox 0x93207dd4 ReceiveNextEventCommon + 380
    6 com.apple.HIToolbox 0x93207c40 BlockUntilNextEventMatchingListInMode + 96
    7 com.apple.AppKit 0x936eaae4 _DPSNextEvent + 384
    8 com.apple.AppKit 0x936ea7a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
    9 com.apple.AppKit 0x936e6cec -[NSApplication run] + 472
    10 com.apple.AppKit 0x937d787c NSApplicationMain + 452
    11 com.apple.iPhoto 0x0000b05c 0x1000 + 41052
    12 com.apple.iPhoto 0x0000af04 0x1000 + 40708
    Thread 1:
    0 libSystem.B.dylib 0x90049ea8 syscallthreadswitch + 8
    1 com.apple.Foundation 0x929795d0 +[NSThread sleepUntilDate:] + 152
    2 com.apple.AppKit 0x93787a10 -[NSUIHeartBeat _heartBeatThread:] + 1100
    3 com.apple.Foundation 0x92961194 forkThreadForFunction + 108
    4 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 2:
    0 libSystem.B.dylib 0x9005b660 accept + 12
    1 com.apple.iPhoto 0x001e309c 0x1000 + 1974428
    2 com.apple.iPhoto 0x0022f080 0x1000 + 2285696
    3 com.apple.iPhoto 0x0022f114 0x1000 + 2285844
    4 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 3:
    0 libSystem.B.dylib 0x9001f08c select + 12
    1 com.apple.CoreFoundation 0x907ef40c __CFSocketManager + 472
    2 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 4:
    0 libSystem.B.dylib 0x90054ae8 semaphoretimedwait_signaltrap + 8
    1 libSystem.B.dylib 0x90071168 pthreadcond_timedwait_relativenp + 556
    2 ...ple.CoreServices.CarbonCore 0x90bf5500 TSWaitOnSemaphoreCommon + 176
    3 ...ickTimeComponents.component 0x98b817c4 ReadSchedulerThreadEntryPoint + 5300
    4 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 5:
    0 libSystem.B.dylib 0x9002bbc8 semaphorewait_signaltrap + 8
    1 libSystem.B.dylib 0x900306ac pthreadcondwait + 480
    2 com.apple.iPhoto 0x001efa50 0x1000 + 2026064
    3 com.apple.iPhoto 0x0021b64c 0x1000 + 2205260
    4 com.apple.iPhoto 0x000cbe38 0x1000 + 831032
    5 com.apple.iPhoto 0x000cfc90 0x1000 + 846992
    6 ...ple.CoreServices.CarbonCore 0x90bf763c InvokeDeferredTaskUPP + 24
    7 com.apple.iPhoto 0x0021b390 0x1000 + 2204560
    8 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 6:
    0 libSystem.B.dylib 0x9002bbc8 semaphorewait_signaltrap + 8
    1 libSystem.B.dylib 0x900306ac pthreadcondwait + 480
    2 com.apple.iPhoto 0x00219fb8 0x1000 + 2199480
    3 com.apple.iPhoto 0x001ef380 0x1000 + 2024320
    4 com.apple.iPhoto 0x001ef4c8 0x1000 + 2024648
    5 com.apple.iPhoto 0x0021b31c 0x1000 + 2204444
    6 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 7:
    0 libSystem.B.dylib 0x9002bbc8 semaphorewait_signaltrap + 8
    1 libSystem.B.dylib 0x900306ac pthreadcondwait + 480
    2 com.apple.iPhoto 0x00219fb8 0x1000 + 2199480
    3 com.apple.iPhoto 0x001ef380 0x1000 + 2024320
    4 com.apple.iPhoto 0x001ef4c8 0x1000 + 2024648
    5 com.apple.iPhoto 0x0021b31c 0x1000 + 2204444
    6 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 8:
    0 libSystem.B.dylib 0x9002bbc8 semaphorewait_signaltrap + 8
    1 libSystem.B.dylib 0x900306ac pthreadcondwait + 480
    2 com.apple.iPhoto 0x00219fb8 0x1000 + 2199480
    3 com.apple.iPhoto 0x001ef380 0x1000 + 2024320
    4 com.apple.iPhoto 0x001ef4c8 0x1000 + 2024648
    5 com.apple.iPhoto 0x0021b31c 0x1000 + 2204444
    6 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 9 Crashed:
    0 com.apple.ColorSync 0x91550f34 CheckValidProfile + 16
    1 com.apple.ColorSync 0x91551d94 CMCloseProfile + 24
    2 com.apple.iPhoto 0x001a200c 0x1000 + 1708044
    3 com.apple.iPhoto 0x001a2498 0x1000 + 1709208
    4 com.apple.iPhoto 0x0012dfbc 0x1000 + 1232828
    5 com.apple.iPhoto 0x000cfa60 0x1000 + 846432
    6 ...ple.CoreServices.CarbonCore 0x90bf763c InvokeDeferredTaskUPP + 24
    7 com.apple.iPhoto 0x0021b390 0x1000 + 2204560
    8 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 10:
    0 libSystem.B.dylib 0x90054ae8 semaphoretimedwait_signaltrap + 8
    1 libSystem.B.dylib 0x90071168 pthreadcond_timedwait_relativenp + 556
    2 ...ple.CoreServices.CarbonCore 0x90bf5500 TSWaitOnSemaphoreCommon + 176
    3 ...ple.CoreServices.CarbonCore 0x90bfffa8 AIOFileThread(void*) + 520
    4 libSystem.B.dylib 0x9002b508 pthreadbody + 96
    Thread 9 crashed with PPC Thread State 64:
    srr0: 0x0000000091550f34 srr1: 0x000000000200f030 vrsave: 0x0000000000000000
    cr: 0x24422444 xer: 0x0000000020000003 lr: 0x0000000091551d94 ctr: 0x0000000091551d7c
    r0: 0x0000000000000000 r1: 0x00000000f01928b0 r2: 0x00000000a474ff1c r3: 0x0000000000000004
    r4: 0x0000000000000048 r5: 0x000000000000008c r6: 0x00000000ffffffff r7: 0x0000000000000002
    r8: 0x0000000000000000 r9: 0x0000000000000001 r10: 0x000000009474d970 r11: 0x000000000046af30
    r12: 0x0000000091551d7c r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
    r16: 0x0000000024420422 r17: 0x00000000004a0000 r18: 0x00000000004a0000 r19: 0x0000000005021eb0
    r20: 0x00000000063246c0 r21: 0x00000000070c6e30 r22: 0x0000000000000000 r23: 0x0000000005022ba0
    r24: 0x0000000006359710 r25: 0x00000000050200d0 r26: 0x0000000000000006 r27: 0x0000000000000001
    r28: 0x0000000000000000 r29: 0x00000000007315e8 r30: 0x0000000000000004 r31: 0x0000000000731614

    Derek
    This looks like a version of the Color Profile bug that afflicts iPhoto since the last update to it and Quicktime.
    The crash is at thread 9
    Thread 9 Crashed:
    0 com.apple.ColorSync 0x91550f34 CheckValidProfile + 16
    1 com.apple.ColorSync 0x91551d94 CMCloseProfile + 24
    This thread
    http://discussions.apple.com/thread.jspa?messageID=3450321&#3450321
    Has a link to Mr. Old Toad's script that will embed the correct colour profile on the file/s.
    Regards
    TD

  • Ilife 11 software upgrade failing and crashing with clicking noise happens

    HELP
    after upgrading my 09 macbook pro to the ilife 11 software. all the others work fine, but iphoto has worked but it says before i can use it, I need to upgrade my library and about less than a 1/3 done it crashed and my mac makes a weird clicking noise?

    Find the OS X installer DVD that came with your computer, or your Snow Leopard upgrade DVD if your computer came with Leopard or Tiger preinstalled — whichever installer disk contains the most recent version of Mac OS X. Insert it into the optical drive and start or restart the computer while holding down the "C" key. Keep holding down the "C" key until the Apple logo appears on the screen, then release it. The computer will start up from the DVD rather than from its internal hard drive, and that will enable you to repair the hard drive's directory using the Repair Disk routine. You wouldn't be able to run that routine if the computer had started up from the drive you were hoping to repair — much the same as you can't change the oil in your car while you're driving it.

  • Anything to worry about?

    Hi for the last couple of days my connection has been slowing down quite a lot. I've had bt broadband for about 20 days now the first 10 days  was great quick connection and low pings (great for online gaming). I've looked at the router settings and I really don't understand it
    would be really grateful for any advice
    here are the stats
    cheers Steve
    Line state
    Connected
    Connection time
    1 day, 4:36:52
    Downstream
    8,128 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    12.3 dB / 27.0 dB
    Line attenuation (Down/Up)
    6.0 dB / 5.5 dB
    Output power (Down/Up)
    9.8 dBm / 12.1 dBm
    Loss of Framing (Local)
    12
    Loss of Signal (Local)
    1
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    3356 / 0
    CRC Errors (Down/Up)
    2 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    3

    just to help with comparisons.
    Line state
    Connected
    Connection time
    0 days, 4:26:32
    Downstream
    16,488 Kbps
    Upstream
    952 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    5.3 dB / 4.8 dB
    Line attenuation (Down/Up)
    27.5 dB / 14.9 dB
    Output power (Down/Up)
    21.1 dBm / 12.4 dBm
    Loss of Framing (Local)
    11
    Loss of Signal (Local)
    1
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    26606 / 259
    CRC Errors (Down/Up)
    9 / 2147480000
    HEC Errors (Down/Up)
    nil / 25103
    Error Seconds (Local)
    55
    i have no idea about errors though

  • Under "About My Mac"-"Memory", it says " ECC:Disabled" Is this anything to worry about?

    I purchased this MacBook Pro from BestBuy as new. I never did any upgrades to it or anything...
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          2 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x484D54313235533654465238432D47372020
      Serial Number:          0x2074D6AF
    BANK 1/DIMM0:
      Size:          2 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x484D54313235533654465238432D47372020
      Serial Number:          0x2044D6AE

    ECC is a different kind of RAM and it is not as fast.  ECC is supposed to be disabled in your laptop.

  • I get hieroglyphics in the top bar of he screen rather than "Firefox - Mozilla Firefox". Anything to worry about?

    On some occasions, I get a series of hieroglyphics in the top bar on my web browser, rather than "Firefox - Mozilla Firefox". I'm concerned this may be linked to a virus. Should I be concerned?
    == This happened ==
    A few times a week
    == I launched Firefox

    If you see CJK (Chinese/Japanese) characters on the Firefox title bar or the Windows Taskbar then that can happen if Firefox switches to UTF-16 encoding for some reason.
    The ''RealPlayer Browser Record Plugin'' extension (Tools > Add-ons > Extensions) has been reported to cause that issue.
    Be sure not to get confused with the RealPlayer plugin (Tools > Add-ons > Plugins) that plays media files.
    The extension adds some extra features like saving media files.
    You can disable/remove the ''RealPlayer Browser Record Plugin'' extension in the RealPlayer Preferences (RealPlayer: Tools > Preferences > Download & Recording)
    See also [[Troubleshooting extensions and themes]]

  • Is this disk diagnostic anything to worry about?

    I'm running a 2011 27" imac. I keep getting this Verify Disk alert on a pretty regular basis. I don't honestly detect any performance issues with the computer. Should I be concerned aboutn this error. I do repair it, but it keeps returning.
    Any advice would be welcome. Thanks.

    You cannot repair the startup disk from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417?viewlocale=en_US
    For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
    http://www.thexlab.com/faqs/repairprocess.html
    Apple's advice on general maintenance:
    http://support.apple.com/kb/HT1147?viewlocale=en_US

  • 802.11n anything to worry about

    i was just thinking is the intel core 2 duo able to pick up 802.11n wireless, i was thinking of buying the new AirPort Extreme Base Station.Any help?????

    To the best of my knowledge, Apple has not yet released or announced a software update for any of the 802.11n-equipped Macs that will enable "n". It's probably just a matter of time, but if you have a working wireless router now, I'd suggest waiting until such an update is available before you buy a Airport Extreme. That way you can be certain your system can take advantage of it.
    Note, of course, that unless you're file sharing with other 802.11n devices on your local network or with wired (Ethernet) devices, having the faster wireless router probably won't do you any good. All wireless routers are faster than the fastest home Internet connection, so an 802.11n wouldn't connect to the Internet any faster, if that's part of your reason for upgrading.
    Regards.

  • I cannot finalize a project in iMovie, notwithstanding 175g of memory.  iMovie says there is a problem with the heap zone.  Worried about a virus or other issue.  Please help.

    I cannot finalize a project in iMovie, notwithstanding 175g of memory.  Could this be a virus or other operating problem.  Have shut down iMovie several times and moved more projects to hard drive to free up space.  Help!

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the application down in Dock)
    But can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    175Gb should be enough.
    Yours Bengt W

  • I'm worried about my PS4 Preorder

    I preordered in June,and I played the full 400 dollars. I can't go to the midnight launch and will have to pickup my PS4 after school tomorrow around 3:00. The thing is I think my Best Buy will have sold my PS4 by then. The console is launching in a few hours. And I won't be able to get mine until after school tomorrow. Hopefully they won't accidentally sell mine. Or hopefully they haven't forgotten I preordered. I still haven't got a call or a e-mail. Hopefully all goes well.

    Hello Damar-
    I’m sure that you can barely contain yourself today in anticipation of picking up your PlayStation 4 after school.  Hopefully you remember to sleep and eat this weekend as well!
    All PS4 pre-orders should be held for 8 days from the date of release and we did receive enough system to cover all of our pre-orders, so I don’t believe you have anything to worry about.  Your system should be waiting for you to pick up and take home today when you get to the store.
    Have fun!
    Bill|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Strange problem with Adobe Acrobat X (crash without a trace)

    Hi,
    I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
    What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
    I've already tried to restart system after crash, it doesn't help - reinstall is required.
    Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes  while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
    Has anyone encountered a similar problem?
    Acrobat version: 10.1.1
    System info: Windows 7 64 bit

    Hi Kelvin,
    Please let me know what OS version you are using.
    The error also shows OS requirements not met.
    Futher please try the steps below :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
    Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
    Regards,
    Rave

Maybe you are looking for