Strange cropping activity from photoshop cs6 to lightroom 4.3

i have never noticed the following activity:
I edited, including cropping, an image in photoshop CS6. I saved the image as a tif and also as a psd. Both sent to a folder which exists in LR catalog. Both images were revealed in LR with the SYNCHRONIZE FOLDER command.
Both images are shown in the appropriate folder, BUT BOTH ARE CROPPED MUCH MORE THAN was done in CS6 editing. Approx 1 inch has been removed along the left side (long dimension) of both images as compared to the dimensions in CS6. They happen to be sitting next to the original image in the LR catalog and it is easy to see the unwanted change. The route from CS6 to LR 4.3 was what I normally use.
WHAR COULD HAVE CAUSED THE APPARENT ADDITIONAL CROPPING SEEN IN LR. Developing in LR crop does allow the image to be restore to proper dimensions by expanding the cropped edge.
wonder if this makes any sense?
I have probably set a switch wrong in LR but cannot find my error. Photoshop seems to have performed flawlsessly.
I use iMac, i7, 10.8.2, 16GB ram.
vince
Message was edited by: vinsolo
Message was edited by: vinsolo

thank you cornelia, for your reply.
I really have no workflow as I rarely do more than retouching of photos for others, each of which usually requires an irregular, often trial-by-error workflow. Most of these images are in very poor condition and are less than well photographed.
The "future project" was really a shortcut to say that i suspected that my client cannot open PSD on her machine and I wanted to have tiffs available for her.
I am afraid that i have not clearly described what i saw happen. And, it continues to occur with this single image after repeat tests of the same procedure. NONE of the other images in that folder, or any other image I have, responded in the way I attempted to describe. Probably user error-I guess I will never know!
In any case, I am very grateful that your had the time to respond.
vince

Similar Messages

  • I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress

    I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress whatsoever. When I export with lightroom 4 trial, no problem.
    Social media marketing is an important part of my business as a photographer, so it is very important for me to make this work.
    Thank you for your help.
    - Reinhard

    The uploaded file has 389kb... Wordpress accepts everything up till 1mb
    error message (see image) is german saying 'bei dem upload ist ein fehler aufgetreten. Probier es später nochmal.' In english should by something like 'there was an error while uploading. Try again later.'
    is definitely a adobe problem, because I tried the exact same foto with same export settings, and it works well with lightroom 4 as well as photoshop cs5, but neither lightroom 5 nor photoshop cs6...

  • Using Mac Mini with Photoshop CS6 and Lightroom

    Hi
    I use Photoshop CS6 and Lightroom 4 mainly as I am a photographer. It involves both programmes live and some huge PSD files kicking around. I would be interested in hearing from any one who does similar on a high end mac mini. I am thinking of getting the high end new i7 with 16g and an SSD.
    Any good ?

    While it will not deliver 'blazing fast' performance, it has tested OK with Photoshop CS6 MGE recently and it has faired decently well in some benchmark reports. Since the OP insisted Mac Mini, I think he can go for it. Also, since his work demands more 'Photo-specific' editing, I guess he should be good. Not much 3D I assume!
    Here are some references:
    http://www.pugetsystems.com/labs/articles/Adobe-Photoshop-CS6-GPU-Acceleration-161 - Look at benchmark reports (images) for Z77 chipset
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html - HD4000 has been tested with CS6 by Adobe
    And I haven't heard of a 'reported failure' per se yet.
    -ST

  • Deactivation . Crash hard drive. New computer. Photoshop CS6 and Lightroom 5.7

    I have both desktop and laptop. Photoshop cs6 and Lightroom 5.7 installed on both. My desktop hard drive crashed and I can't deactivate both Photoshop cs6 and Lightroom 5.7 on the desktop. I believe I have 2 activations on both Photoshop and Lightroom. I need to deactivate both Photoshop and Lightroom to reinstall on new Desktop. I do not want to deactivate on the laptop. Remember the old desktop hard drive crash before deactivating. Help.

    If you have a subscription there should be no problem.  You should be able to install on two machines. If you try to activate a third machine I believe the activation server will deactivate all your activations.  Then activate the current machine. You can then re-activate one of you other machines.
    If you have a perpetual licence and have two activation you will need Adobe Customer Support to assist you.

  • I can't open Bridge and Mini Bridge from Photoshop CS6 (64bit)

    I can't open Bridge CS6 64(Bit) and Mini Bridge from Photoshop CS6 (64bit), I get an error message (APPCRASH ). I can open only Bridge (32bit) as a stand alone program.
    Operating system Windows 7 (64bit).

    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Mylenium

  • Installing Photoshop CS6 and Lightroom 4

    I currently have Photoshop CS6 and Lightroom 4 on my MacBook Pro. However I am considering a purchase of an iMac
    Can I install a second copy of CS6 and Lightroom on to the iMac (Same License Key), and run both at the same time
    Thank You

    Yes you can install on up to two computers.  You can find additional details in the End User License Agreement at http://www.adobe.com/products/eulas/#desktop.

  • The Newly Redesigned Crop Tool in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV

    There are several advantages to the newly redesigned Crop tool in Photoshop CS6. In this video tutorial, Julieanne demonstrates the refined interface, new features, customizable presets, enhanced tools and essential shortcuts that will make cropping easier than ever.
    http://adobe.ly/LiFbdI

    In CS6 if you simply switch to the crop tool after making the selection the crop area is automatically set to the selected area and if you don't want to change anything click on the ok check mark and you are done.  Is that what you want to do?

  • Update of Camera Raw 7.2 for Photoshop CS6 and Lightroom 4.2 - now Bad color

    Did the auto update of Camera Raw 7.2 to Photoshop CS6 and Lightroom 4.2 now the color is green and flat in all images after I save them. I do use a Nikon Camera profile and lens correction. Everything was working fine until the 7.2 update. Now the only way to save correctly is to Save for Web. Where do I match the color/profiles?
    Mig

    Color Settings are :     RGB     sRGB IEC61966-2.1
                                       CMYK     U.S.Web Cooated (SWOP) v2
    Color Management:     All say preserve embedded profile
    I had marked the Profile mismatch boxes to see if I got an error message, but I never did, so I cleared them again.
    Conversion Options:     Engine     Adobe
                                                Intent     Relative Colorimetric
    Advanced Control     Only one checked iis Blend Text Colors using Gamma at 1.45
    As far as what settings do I open images with.  File > Open and find the file. During the edit process everything looks perfect - only after I save is the file trashed.
    Under Preferences: File Handling > File Compatibilty > checked are Prefer Adobe Camera Raw for Supportred files
    Everything has been fine for months with PS CS6 & Lightroom 4.2 & Colorchecker software profiles, until the Raw Camera update. And I can still save perfect images as long as I save they with the File > Save for Web.

  • Need assistance to update Photoshop cs6 and Lightroom to version 2014. Please help!

    Need assistance to update Photoshop cs6 and Lightroom  to version 2014.
    I have a Mac. I am not a member in Creative Cloud, invested big and bought CS6 and LR in the beginning of last year.
    Please help!

    These are not updates (just as CS6 was not an update to CS5), but upGRADES. They are available to CC (Creative Cloud) subscribers. While in the past you might have been able to pay for an upgrade (e.g. CS5 to CS6) you now have to subscribe. Once you are a subscriber you can upgrade to each new version as it comes along.
    As well as the full CC subscription there is a $10/mo plan with only Photoshop and Lightroom. Creative Cloud Photography plan | Adobe Creative Cloud

  • Currently running OS 10.6.8. If I update to Mountain Lion will Photoshop CS6 and Lightroom 4 still work?

    Currently running OS 10.6.8. If I update to Mountain Lion will Photoshop CS6 and Lightroom 4 still work?

    Can't say anything about Lightroom, but Adobe officially supports CS6 all the way through Mountain Lion.

  • Why are 3D objects incredibly small when exported from Photoshop CS6?

    When I attempt to export 3D objects for use in Apple's iBooks Author software—say, a Collada 3D model of Earth for a children's science book—from Photoshop CS6, the object comes out impossibly small or completely invisible. It will work just fine in Photoshop, but if I view it in Finder using Quick Look, open it in Preview, or drop it into an iBooks Author project, the object appears so small that it's useless. No amount of scaling it in said software corrects the issue, either.
    What happened? Is there a new export preset I'm missing? I used this exact same process in Photoshop CS5, and it worked wonderfully.
    Thank you!

    HI,
    Am also having similar problem with exporting 3d model into ibook or iauthor.
    Any help ?

  • Printing from Photoshop CS6

    Having problems printing from photoshop cs6 the colors are way off. How do you collebrate the printer to print whats on screen?

    you are going to have to try and match your printer colors to the image colors. many questions involving color management and your settings in PS: is CMYK set? set your "printer handles colors"?
    for color management:
    1. calibrate and profile your monitor
    2. set up an image color space
    3. configure your printer driver for the print.
    reference this link:
    http://www.graphics.com/modules.php?artid=736&name=Sections&op=viewarticle
    http://www.computer-darkroom.com/ps10_print/ps10_print_1.htm
    take a look at the links-
    -janelle

  • Converting to Photoshop CC from Photoshop CS6

    If I convert to Photoshop CC from Photoshop CS6 will I have to uninstall the CS6 version or could it continue to run alongside CC?

    If you want it can stay installed. It is installed in a separate folder, so they do not affect each other.

  • Saving photo from photoshop back to lightroom

    I am trying to save my photo from photoshop back to lightroom and I keep getting an error that is "could not save because disk does not exist.  Anyone know how to fix this?

    Has the file ever been imported into Lightroom?
    Did you use the "edit in PS" function to send the file from Lightroom to PS for further editing?

  • I can not longer print from photoshop CS6

    I get an error message when I try to print from photoshop CS6
    Nothing I've done has helped.

    These suggestions are not the problem and I have contacted HP and they have run all the diagnostics and they say the problem is not with the printer or the software. All other browsers print, just not Mozilla

Maybe you are looking for

  • Blurry Video Exports

    Hello! I am working on a new project using the CS4 Master Collection and experiencing some issues using Premier Pro CS4. I've created a new project in Adobe After Effects CS4 and exported a quicktime movie with high quality "animation" settings appli

  • Participation Overview iView

    In Portal ESS> Benefits and Payments > Participation Overview iView is not showing "Flexible Spending" as one of the listed plans. Please advice.

  • SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users

    I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010. The problem is that it will not work for users who have Read access only on a SharePoint site.  It will work when those users have Contribute access

  • Printing QR Codes within CR

    Hello I need to create a addon for SBO 9.0 and SBO 8.8x that generate the QR code on the fly based on data on AR Invoice data so it can be printed in the AR Invoice. What libraries are recommended  for generating these QR Codes ? Any experiencies ? R

  • Cannot open .acsm files in Digital Editions 1.7.1.1085

    i have downloaded an ebook in .acsm file but cannot open it in the latest version of Digital Editions.  .acsm files are correctly associated with Digital Editions on my system (i'm running Visa) when i try to add items to the library, the only allowe