Strange date and empty mail
I receive strange emails. They are empty and the date is 1-1-01 .
After reset my iPad it still happens. The mails are not on my iMac. I have gmail. I cann,t see them when i log into webmail.
Try deleting your gmail account on your iPad, then create it again and see if that clears up the problem.
Similar Messages
-
Deleted my "microsoft user data" and emptied trash! how to recover!!
I deleted my "microsoft user data" which contains everything to do with my entourage and then emptied the trash (not secure though). I know what was I thinking....I am running filesalvage. What do i do next in order to recover everything?? thanks!
First, you need to understand that it's highly unlikely the recovered data will be intact. The longer it's been since you deleted it and the more you've used the computer during that time, the less likely it is that you'll be able to recover 100% of the data.
This is because it's likely that the computer has written new data over the same sections of the hard drive that the old data used to occupy. This means that you may recover the folder only to find that Entourage tells you the database is "corrupt" or "unreadable" or something similar.
(Also - I encourage you to switch to Apple Mail and IMAP accounts for your email. Using IMAP, everything stays stored on your server so that you never lose your email, no matter what happens to your computer. For more information, google IMAP and read about it.)
Having said that, you'll find instructions for how to use FileSalvage at this website, roughly 2/3rds of the way down:
http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
Good luck! -
HT1338 Strange tones and sending mail sounds when not sending mail - MacBook Pro
My MacBook Pro started making a strange repetitive tone. Also, sometimes the sending mail sound commences repetitively when not sending mail.
maybe a glimmer of hope, eventually deleted my email account and reinstalled it, so far so good! time will tell, thanks to Alexander from Apple support (Greece) for that one!!
-
Problems with incoming and outgoing mail
I've read a number of posts on this topic, yet none completely matches the problems I'm having.
Incoming Mail:
My incoming e-mail is a pop account hosted by Earthlink. I am able to enter my data and get mail using a non wi-fi network.
Outgoing Mail:
When I use the generic AT&T outgoing server, it works, but then I am unable to get mail, and vice-versa. (I tried sending mail through the general web hosting server that Earthlink recommended (and works on my laptop when traveling away from home network, but it just spins.)
Conflict:
I am either able to send mail or receive mail, not both at once, thank-you-very-much.
The settings and ports are unchanged. And, I can't figure out why one would affect the other considering they are two completely different settings.
We're currently trying to set up a smtp.com or Google mail account, which is okay, but I would much rather solve this without any more links in the chain.
Any suggestions? Will re-setting my iPhone completely help?Yes, thanks, was my first stop and very handy.
Unfortunately, because my pop account is hosted/relayed at Earthlink, it did not identify the account as it would a stand-alone service. I tried using the basic Earthlink account info, but of course, my basic account does not have anything to do with my current business pop account. So after using the set-up assistant, I was back at square one.
I was able to set up smtp.com successfully and am up and running.
I just can't figure out why one setting would mess up another. -
Many messages are showing up randomly on my mail. They say no message, no sender and have strange dates. The text is gray; I cannot delete them. What is this?
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contacting Apple for
support and service.
c. Rescue email address and how to reset Apple ID security questions -
I inadvertently deleted all the mail in my in box and emptied trash. Can they be retrieved?
Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft
Data Recovery - Recovering Deleted Files
Data Recovery - Recovering Deleted Files (2) -
How do I clean up mail in my icloud? I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room). When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room. Is there a way to actually log on to the icloud server to manage what it stored there? If so, how do I do it? Also, on a related subject, why does my mail not sync accross all devices? ie. when I delete an email on one device, why do I still see it on all my other devices? How can I change this?
I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem? Looking to upgrade to a Mac sometime this year...
Thank-you for the help!beckyfromoz wrote:
I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday. They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule -
can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead
The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao. -
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
How to capture date and userdi in the alert mail
Hi,
In the alert mail I want to capture the userid, date and time. In the container I can define these variables but I was unable to caputre the values. Iam not using any BPM scenario. Can any body help me in this regard how to capture these values. Thanks in advance.
Thanks & Regards,
Mallikarjun.MHi,
Iam using the correct dict type as you mentioned in the above mail. But in my mail it shows that the container elements ZDATE of type SWFXST_DATE, ZTIME of type SWFXST_TIME as not found. I hope this will be solved.
Thanks,
Mallikarjun.M -
Wrong date and time in apple's mail client
All mails in my inbox are displaying date at 1429 a.c. Although through my web gmail interface, dates are correct the mac client is fault. I also tried with Thunderbird e-mail client and i also get wrong date and time. I checked the date and time preferences and everything is correct. Any suggestions?
ThanksHi,
In the Initial screen, please remove the tick for Display Header. It will not give any header details after execution. If you want to remove only date, you just check with your ABAPer, he can help by changing in program.
Thanks
Kishore Babu -
Setting date and time in java mail
I want to set date and time for the mail sent by my application.
So how to set date and time for my mail.msg.setSentDate(new Date());Where msg is an instance of javax.mail.Message.
-
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete -
How can I copy the date and time in Mail header?
How can I copy the date and time in Mail header?
I can copy everything else in the header for pasting in another application.
But not the date and time which is absolutely vital.
It was ok in 10.6I suppose you could copy it from the Raw Source. View>Message>Raw Source
-
Birmingham, Thursday 2. Feb. 2012
To whom it may concern,
I have an issue regarding the e-mail system, and I wanted to know how I can add a default that the date and time is added automatically to the E-mail page everytime I draft a new e-mail.
Does anyone know how do create a "plug-in" to enable me to have the date and t ime posted on the e0-mail page every time i send a new e-mail ?
If there is a plug in which is compatible with Lion iMac computers thart insert the date and time into every E-mail I send ?
Kind regards
Christipoher H. Bull
E-mail: [email protected]This supports macros and variables, it doesn't specifically state date and time, but if it supports variables I'd be surprised if it didn't have variables for those:
http://email.about.com/cs/mailplugins/gr/mailtemplate.htm
This one also supports variables and may do what you want:
http://itunes.apple.com/gb/app/logical-mail-free/id451881152?mt=12
You may want to look for more, I found those by googling 'mac email templates variables'.
Maybe you are looking for
-
Yesterday We went to At and T store and they told me to download from old phone to new phone and I am really upset and I got Icloud and prove but part of still in 4S and has not go in 5S and that is biggest problem and no commuication that woman stay
-
Can i use the SAP standard package for lock object creation ?
Dear Guru , I want to create a new lock ojbect for my abap program . When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package . But i saw the help from SAP said : >* Package begins
-
hello my problem is i am trying to make a 3D environment using pure java concepts, im a newbie to java and this is my college project......actually wat i exactly wanna know is.........how can a increase or decrease the size of an image without affect
-
Proxy configuration in Portal 6.2
Hello, the Portal 6.2 Administrator's Guide contains the following instructions to use a proxy server: <---------------->8------------->8-------------------> Configuring a Sun ONE Portal Server Instance to Use an HTTP Proxy If the Sun ONE Portal Serv
-
MSI GTX 750 Ti upgrade for a "hpe-521 it" model
Hello, I would like to upgrade my desktop video card to a GTX 750 Ti. My desktop model (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02782877&cc=it&dlc=it&lc=it&product=5095560) should be compatible with the card, at least it seems to me. I h