Strange Delay with XGL and Beryl in popups

I have a strange delay in Beryl with XGL. When I open a menu or the start many, or anything, it appears a strange slow motion delay. How can I get rid of it? It is ugly.

Go inside the beryl Setting, because I know that there is an effect that does that.

Similar Messages

  • Strange Problems With Display and Permissions Since 10.5.1 update.

    Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
    I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
    I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
    Here is a screen shot of the line and dock problem.
    Here is a screen shot of my "About This Mac.
    If anyone could lend some light on this issue, I would greatly appreciate it.
    Thanks
    Jeff

    you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
    btw - no solution yet.

  • Strange problem with DatagramSocket and DatagramPacket.

    Hi!
    I got a strange problem with UDP sockets:
    Client (hardware device) send binary data messages, consisting of bytes and shorts fields (8 and 16 bits). But when I tried to read byte array, received from socket, I got some type anomaly. For example:
    byte[] buffer = new byte[1024];
    DatagramPacket packet = new DatagramPacket(buffer, 1024);
    socket.receive(packet);
    byte[] data = packet.getData();
    System.out.println("Received data:");
    for (int i = 0; i < packet.getLength(); i++) {
      System.out.printf("%h:", data);
    I got such thing: 34:4:fffffff1:ffffffdb:ffffffdc:20:1:1:0:2:50
    If I try to parse it using ByteArrayInputStream and DataInputStream
    ByteArrayInputStream is = new ByteArrayInputStream(packet.getData());
    DataInputStream dis = new DataInputStream(is);
    int head = dis.readByte();
    int recvinfo = dis.readByte();
    short count = (short)dis.readShort();
    System.err.printf("Decoded:\n head: %h\n recvinfo: %h\n count: %h\n",
         head, recvinfo, count);i got following:
    Decoded:
    head: 34
    recvinfo: 4
    count: fffff1db
    So I get Integer entries in byte?! array. I also got Integer even I try to read and cast it as short in short!!! variable.
    Please help!
    P.S. Sorry for my bad English.

    Rather fortunate that it auto-casts(or rather, that 0xFF is int by default, rather than attempting any type-detection as most languages do), as otherwise the brackets would have been in the wrong place. If it was still a byte after the "& 0xFF", sign extension would still occur.
    For the sake of the less bit-literate reading this thread, it should be explained that the reason for this was large bytes being interpreted as negative numbers, which translate to negative int, which in hexa become very large ints. That's about as verbose as I can be about this without writing the equivalent of a wikipedia entry about 2s complement.

  • Strange issue with imap and a blank empty sent messages folder

    So here is a weird one. I got a new computer last week, Mac mini core duo. Set everything up, synced my .Mac and it set up mail. I have been using mail, i try to view Sent Messages for one of my IMAP accounts which should have 10,200 messsages in it. I see nothing. On rebuild mailbox it goes blank. Some messages I send are stored until i rebuild mailbox and it again is empty. On my other Macs (powerbook 12" and dual G4) I am still able to view and manipulate this same accounts Sent Messages. One webmail everything still works as well. While trying to copy old messages down to the Powerbook to archive them I noticed that it was very slow, and messages which were not cached already caused the Copy to fail. I am using Courier IMAP with Maildirs and Postfix on FreeBSD as a server.

    my IMAP server uses INBOX as its root.. hence that folder only contains...
    INBOX.imapmbox
    INBOX
    However one level down in INBOX I have...
    DeSmit.imapmbox
    HealthCareSource HR.imapmbox
    SimTech.imapmbox
    Lange International.imapmbox
    Sandhill Photography.imapmbox
    Sales People.imapmbox
    Hosting.imapmbox
    Marwan.imapmbox
    Lucidics.imapmbox
    Jeorgea Beck.imapmbox
    Web Marketing.imapmbox
    Sent.imapmbox
    SEBA.imapmbox
    Merchant Accounts.imapmbox
    The Hired Pens.imapmbox
    Kuhl Therapy.imapmbox
    Keen Films.imapmbox
    PeopleVision.imapmbox
    Competition.imapmbox
    East Street Woodworking.imapmbox
    Cambium Learning.imapmbox
    Legal.imapmbox
    LFCG.imapmbox
    Mailing Lists.imapmbox
    Drafts.imapmbox
    Ipswitch.imapmbox
    Prism Scienceworks.imapmbox
    Printers.imapmbox
    Mindspark7.imapmbox
    Air Media.imapmbox
    Demios.imapmbox
    Cabem.imapmbox
    LexiPixel.imapmbox
    Apple.imapmbox
    Regent Theatre.imapmbox
    Proun Design.imapmbox
    Prospects.imapmbox
    Goodwin PR.imapmbox
    Xplana.imapmbox
    Competitive Analysis.imapmbox
    Banimon.imapmbox
    Zaid.imapmbox
    Stay In Touch.imapmbox
    Junk.imapmbox
    UI Research.imapmbox
    Faxes.imapmbox
    Dewey Nichols.imapmbox
    StrideRite.imapmbox
    Future Works.imapmbox
    Franklin Cafe.imapmbox
    Epsilon.imapmbox
    CitySoft.imapmbox
    Bearak.imapmbox
    Pridgeon Design.imapmbox
    BDS.imapmbox
    Highland MBP.imapmbox
    Create TV.imapmbox
    Crystal Clean.imapmbox
    Longs Jewelers.imapmbox
    Lollipop.imapmbox
    AFT.imapmbox
    Wholen.imapmbox
    Peppercoin.imapmbox
    RocketShop.imapmbox
    Rocket North.imapmbox
    Barrister Books.imapmbox
    Venture Capital Fund of NE.imapmbox
    bodygard.imapmbox
    Blakely Project.imapmbox
    Comm Promo.imapmbox
    Judith Aronson.imapmbox
    Vendors.imapmbox
    Trash.imapmbox
    Accounts.imapmbox
    Agena.imapmbox
    Manifesto.imapmbox
    Portfolios.imapmbox
    Progressive Roofing.imapmbox
    Process & Deliverables.imapmbox
    Advertising.imapmbox
    Chris Zikakis.imapmbox
    Mojo Marketing.imapmbox
    Lauer Learning.imapmbox
    NOME.imapmbox
    Nantucket Kneepants.imapmbox
    NEMO.imapmbox
    Nickelsen Partners.imapmbox
    Essential.imapmbox
    Lawler Kang.imapmbox
    Accounting.imapmbox
    Compuworks.imapmbox
    Inside of Sent.imapbox we have...
    Messages
    Info.plist
    And inside of Messages are the 2 messages I sent today after testing another rebuild command...
    29601.emlx
    29193.emlx

  • Strange problem with Outlets and Collection View Items

    This is a strange issue. I am using XCode 3.2.2 and I am building a Collection View. To do this I have a non-document based application that uses Core Data.
    *Collection View Item Class*
    I created a new class that inherits NSCollectionViewItem and built it to have an outlet to the Label.
    *Collection View Item NIB*
    I created a Empty NIB for my Collection View Item. To the NIB I added a Custom View object and set the Class Identity to NSBox. I then added a Label to the new NSBox. I changed the File Owner to the new class and connected the "view" outlet to the new NSBox and the Label to the label outlet.
    *Main Menu NIB*
    I added a new NSCollectionViewItem object to the Main Menu NIB and set the Class Identity to the new class mentioned above. I then set the NIB Name to the name of the NIB mentioned above. In the window I added a NSCollectionView then set its Item Prototype to the new NSCollectionViewItem object I just configured. This is the typical way to set up a collection view with its item in a different NIB.
    *Back to the problem*
    Everything seem to work well except that in the setRepresentativeObject in the Collection View Item class when it attempts to set the Label to a value. Nothing happens. When I check closely I find that the Label is coming back nil. It is properly linked. I deleted everything and rebuilt the collection view item and relinked everything without success.
    *How I made it work but not happy with it*
    I have finally made this work by simply putting the line "[self view];" just before I attempt to run "[label setStringValue:name];". If I remark out the "[self view];" the label returns nil. I have a note near the line to make it easier to spot. It seems that I should not need to access the superclass's "view" accessor just to access one of view's subviews. Is this a bug or have I written this wrong?
    The Collection View Item code is below. Any help is appreciated.
    Thanks,
    Rob
    #import <Cocoa/Cocoa.h>
    #import "PersonManagedObject.h"
    @interface PersonSelectionViewItem : NSCollectionViewItem {
    NSTextField *label;
    #pragma mark Finalizers
    - (void)dealloc;
    #pragma mark Outlets
    @property (nonatomic, assign) IBOutlet NSTextField *label;
    #pragma mark Instance Methods
    - (void)configureKeyValueObserving;
    - (void)removeKeyValueObserving;
    #pragma mark Overrides
    - (void)setRepresentedObject:(id)representedObject;
    - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context;
    @end
    #import "PersonSelectionViewItem.h"
    @implementation PersonSelectionViewItem
    #pragma mark Finalizers
    - (void)dealloc{
    [self removeKeyValueObserving];
    [super dealloc];
    #pragma mark Outlets
    @synthesize name;
    #pragma mark Instance Methods
    - (void)configureKeyValueObserving{
    PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
    [person addObserver:self forKeyPath:@"lastNameFirstName" options:0 context:NULL];
    - (void)removeKeyValueObserving{
    PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
    [person removeObserver:self forKeyPath:@"lastNameFirstName"];
    #pragma mark Overrides
    - (void)setRepresentedObject:(id)representedObject{
    [super setRepresentedObject:representedObject];
    NSString *personName = (NSString *)[representedObject valueForKey:@"lastNameFirstName"];
    [self view]; //<---Without this line the "label" variable 2 lines down will be nil.
    if (personName) {
    [label setStringValue:personName];
    [self configureKeyValueObserving];
    - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context{
    if ([keyPath isEqualToString:@"lastNameFirstName"]) {
    [[self label]setStringValue:[object valueForKey:@"lastNameFirstName"]];
    } else {
    [super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
    @end

    I think you must be correct. I just ran into the problem again in yet another NIB. It was in the setRepresentedObject method. I simply put in the same line "\[self view\]" just before I needed to set the value of the view component and it worked again. If it is the same in other components I guess I just need to pay attention to it. Thanks for the information.
    Message was edited by: Cycles4Fun

  • Strange behavior with Zoom and Image control

    HELP - I have a strange behavior (bug?) with using Zoom
    effect on an Image that has been placed on a Canvas. I am using
    dynamically instantiated images which are placed on a canvas inside
    a panel. I then assign a Zoom IN and Zoom Out behavior to the
    image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
    is that the image jumps around on the Zoom OUT and lands on a
    random place on the canvas instead of coming back to the original
    spot. This is especially true if the mouse goes in and out of the
    image very quickly. HELP -- what am I doing wrong? Computer = Mac
    OS X 10.4.9 Flex 2.0.1
    Here's a simple demo of the bug -- be sure to move the mouse
    in and out rapidly:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" creationComplete="setUp();">
    <mx:Script><![CDATA[
    import mx.events.EffectEvent;
    import mx.effects.Fade;
    import mx.effects.Zoom;
    import mx.rpc.events.ResultEvent;
    import flash.display.Sprite;
    import mx.core.UIComponent;
    import mx.controls.Image;
    private var zoomIn:Zoom;
    private var zoomOut:Zoom;
    private function setUp():void {
    var image:Image = new Image();
    image.id = "album_1_1";
    image.x = 200;
    image.y = 200;
    image.width = 64;
    image.height = 64;
    image.source = "
    http://s3.amazonaws.com/davidmccallie/album-128.jpg";
    image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
    image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
    myCanvas.addChild(image);
    zoomIn = new Zoom();
    zoomIn.zoomHeightTo = 2.0;
    zoomIn.zoomWidthTo = 2.0;
    zoomIn.captureRollEvents = true;
    zoomIn.suspendBackgroundProcessing = true;
    zoomOut = new Zoom();
    zoomOut.zoomHeightTo = 1.0;
    zoomOut.zoomWidthTo = 1.0;
    zoomOut.captureRollEvents = true;
    zoomOut.suspendBackgroundProcessing = true;
    private function doZoom(event:MouseEvent):void {
    var image:Image = Image(event.currentTarget);
    if (event.type == MouseEvent.ROLL_OVER) {
    zoomIn.target = event.currentTarget;
    zoomIn.play();
    } else if (event.type == MouseEvent.ROLL_OUT) {
    zoomOut.target = event.currentTarget;
    zoomOut.play();
    ]]>
    </mx:Script>
    <mx:Panel width="100%" height="100%"
    layout="absolute">
    <mx:Canvas id="myCanvas" width="100%" height="100%">
    </mx:Canvas>
    </mx:Panel>
    </mx:Application>

    There must be bugs in the Zoom effect code -- I changed the
    Zoom to Resize in the above code, and it works perfectly. Of
    course, Resize is not as nice as Zoom because you can't set the
    resize to be around the center of the image, but at least it works.
    Does anyone know about bugs in the Zoom effect?

  • Strange happenings with text and links

    I am not very tech savy so be gentle. I have a blog on iweb. Today I posted and there is something going awry with my text. In a certain part it is hazy and stretched when you mouse over it the mouse pointer turns to a link. Very strange as I didn't place a link there.
    Also, as a side note, I was wondering how I would make my blog more noticed? Is there a way to make it search engine friendly, or are there any boards I can post it on?
    if it would be helpful here is a link to the blog:
    http://web.mac.com/hottee295/iWeb/Site%202/Blog/E4A931A9-D343-4CE2-9259-1F759532 5E09.html

    Are you sure you didn't make a hyperlink there? The link goes to...
    http://www.sewneau.com/how.to/flat.felled.seam.html
    ...which seems in keeping with the subject matter of your site.
    Anyways, look again in iWeb and make sure you did not inadvertantly put a hyperlink for the involved text. Otherwise, this stretched out text is usually indicative of a corruption of your link image. It's nothing to worry about as it is easily remedied by a "Publish All to .Mac" command.
    As far as getting your site indexed, you are doing the right thing by posting your URL here. It's a step in the right direction. Give it some time. You can also submit your iWeb URL here...
    http://www.google.com/addurl
    Just submit: http://web.mac.com/hottee295/iWeb/
    That should be sufficient.

  • Having strange issues with kbmap and utc/localtime

    Hello,
    I've been using Archlinux for a month or so, never had any problems until now.
    1. Setting the keymap doesn't stick. At first I had the German keymap selected in System-Preferences-Keyboard, and at reboot it would switch back to the standard US layout. Yesterday I deleted the current layout and again added German as the default.. And at bootup today I had a russian layout .
    2. I haven't been able to get the UTC function properly working.. The hwclock was set in UTC (date -u showed the correct time), UTC was set in the rc.conf, but the Gnome clock always showed the wrong time. (Now localtime is set in rc.conf)
    2a. Related to that, I installed openntpd and added it as a startup daemon.. System-Administration-Time and Date still gives me an error message "NTP support is not installed" when I set the configuration to "Keep synchronized with internet servers".
    Here's my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Vienna"
    KEYMAP="de"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(atl1 mii slhc vboxdrv
    !ac97_bus !snd-mixer-oss !snd-pcm-oss !snd-seq-oss !snd-seq-device !snd-seq-midi-event
    !snd-seq !snd-page-alloc !snd-pcm !snd-rawmidi !snd-timer !snd !snd-mpu401-uart
    !snd-ak4xxx-adda !snd-cs8427 !snd-i2c !snd-ac97-codec !snd-ice1712 !snd-ice17xx-ak4xxx !soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="localhost"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="dhcp"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng !network hal @dhcdbd @networkmanager netfs @crond @acpid
    @sensors @oss-linux-free @cups @openntpd gdm)
    ..and xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder57) Thu Jul 17 18:40:12 PDT 2008
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    RgbPath "/usr/X11R6/lib/X11/rgb"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    # Load "type1"
    Load "freetype"
    Load "glx"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "Xkblayout" "de"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "@@@ T19DS"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 77.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 8800 Ultra"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "1"
    Option "TwinViewXineramaInfoOrder" "DFP-1"
    Option "metamodes" "DFP-0: nvidia-auto-select +1680+0, DFP-1: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    thanks in advance for any help!

    I don’t know that problem, but have you tried if turning off OpenGL and restarting has a bearing on the issue?
    Boilerplate-text:
    Other than that are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

  • Strange problem with RDP and mouse, only solved after minimize/maximize

    Good day,
    We have this very annoying problem with a RDP Terminal Server. It is Windows Server 2008 R2 SP1.
    This server has the Session Host role installed, with local RDP user licenses.
    We only have this issue when running a certain application.
    This application is called Rockwell FactoryTalk View and this in an application to display industrial processes.
    It will take the Full Screen in a fixed resolution and will display buttons, objects, values... The application also uses Internet Explorer cache so I think it uses ActiveX, Flash or Java, I don't know.
    What sometimes happens is this:
    - The mouse point is able to move in the entire screen (good)
    - The mouse button will only work in 1 certain area of the screen (which is a small rectangle)
    - The mouse "hovering" above objects will also only highlight items that are in this rectangle
    - The keyboard remains functional and with alt-tab other objects or other applications can get focus, but still no mouse clicking
    The problem can be solved by:
    - Minimizing the RDP window and maximizing it again
    - Or: Sending a message to the session using task manager, after clicking "OK" on that message the problem is gone
    Normally, about 5 users will have this application opened in their session, the "crash" is only effecting 1 session.
    The problem seems to happen randomly and we don't know if we should point to the FactoryTalk application, or to Terminal Services/RDP. The end users have no rights to minimize/maximize, this is not the solution. 
    Is it possible to have any input on this please?
    Thank you.

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly please check with the application support team whether the application is fully supported by Windows Server 2008 R2 in remote session. In addition, suggest you to update the client RDP version to RDP 8.1 and check the result for better feature and functionality. 
    Apart from this, there is Hotfix for the issue. Please download, install and check the result.
    Cause:
    The issue occurs because the remote desktop ActiveX object does not deactivate the focus of the remote desktop session when the focus is lost. Because the focus is still activated, the remote desktop ActiveX object cannot set the focus of the remote desktop
    session again when you change the focus back to the session.
    A remote desktop session does not respond to keyboard input or mouse input after it loses the focus in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2579381
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Strange behavior with Premiere and effects in CS6

    Hello
    I created a PS file with several layers of a subject for a TV show idea i am preparing for a presintation but every time a render my effects are not as i see them., speciffialy the 8-16 point Garbage mattes and keying.
    The PS files where dragged and dropped into Premiere and as Sequences to maintin them in folders and in a Nested Sequence.,
    Then i sort of sequences masked PS layers, using Ultra key to punch out the greene screen,  8/16 point Gabrage mattes to take out any other noise or background images un wanted, MOJO to warm up the subject i then placed the sequence as a NESTED sequence in my time line, but when i would render the Garbage Mattes, keying and all would be partially showing a previous tweek, but when i open the nested Sequence i would not see these errors or older tweeks, yet in the main Sequence aka composition i would see them yet when i would place the mouse over the time line to select an area for the position to play they would go away again,
    sounds like a bug?
    OSX10.7.4 
    imac i7 12GB
    8TB RAID
    CS6 Suite
    Message was edited by: Andrew Yoole
    This message was relocated from the After Effects Forum.

    There must be bugs in the Zoom effect code -- I changed the
    Zoom to Resize in the above code, and it works perfectly. Of
    course, Resize is not as nice as Zoom because you can't set the
    resize to be around the center of the image, but at least it works.
    Does anyone know about bugs in the Zoom effect?

  • Strange occurrence with iPad and posting to WordPress

    I came across an odd issue with my iPad. When I click on "New Post" at my regular WordPress blog (online) I can enter a title, however, the cursor refuses to click in the window where the body of the post is written. Not only will it not click in there, but the keyboard disappears back into the dock as if there's nowhere to type anything.
    So, the bottom line is I can't use my iPad to write my blog posts.
    Works fine, however, on my iPhone 3GS.
    Anyone else experienced this?

    Thanks OrangeMarlin. I've downloaded the app and it works fine, however, the problem still persists on my iPad trying to write a post, and it occurred at another site today, too. The iPad just won't let you click inside a message box at some sites.
    Perhaps it's something they'll remedy over time.

  • Strange sorting with Soundtracks and Compilations

    Hi,
    currently I am cleaning my iTunes library. I am going step by step sorted by artist in the left pane . For Example I am now with Louis Armstrong and found a title from a sondtrack that is a compilation as well.
    But there are lot of other albums found under Louis Armstromg that are compilations and / ore soundtracks as well. I have cecked the tags of the other albums, there is now Louis Armstron to find. Even if I try anothe genre as "soundtrack" or uncheck the compilation checkbox these albums are still under Louis Armstrong....
    Any ideas?
    Thank you
    Oliver

    Hi Emmanuel,
    thank you, but unfortunately this did not help
    Oliver

  • Strange glitch with keynote and iPad

    I have been using Keynote files created on my Mac and transferred to my iPad3 to go over problem sets in my physics classes. I tecently ran into an odd glitch. Sometimes, an arrow pointing upward on the original slide, shows reversed on the iPad, and vice-versa. I don't see a clear pattern yet of when it happens. Has anyone seen it and have an idea of what is going on?

    Actually, all of my builds (scale, scale up, wipe in a bunch of diections, appear) work fine. This phenomenon happens on some vertical arrows in the absence of any builds. It really is odd. As I'm importing the file, it shows a preview with the correct orientaion, but as I watch, it flips just before the import is complete!
    It's not very hard to fix in Keynotte, on the iPad, just irritating.

  • Two very STRANGE problems with JWindow and JTextField

    I am having some trouble in the program that I am making. It is a Swing based GUI.
    I have a JWindow with a JPanel in it that holds JTextFields and JLabels.
    problem1----I can't see a caret in any of the textfields but I can still enter text.
    problem2----If I control + tab to another window, and control + tab to get back to the JWindow then I can see a caret, but the caret will not change if I click on another textfield and also I can't move to another textfield to enter text. If i do another control tab, then the textfield that i tried to switch to will have focus, but there is now two carets...the first one is where I was but that field does not have focus. I can do this control-tab for as many textfields as I need to fill, but it obviously is not practical.
    I am using a call to super(Frame frame) when calling my JWindow but that didn't seem to fix it.
    Any help would be great!!!!! thanks john

    try checking out this thread :
    http://forum.java.sun.com/thread.jsp?forum=57&thread=153344
    sounds like your problem, kinda. it looks more like a repaint issue, since u get two carets at the same time - as if the screen isn't refreshing enough (u could give it some Spearmint POLO :)

  • Very strange bug with AIR and native process (Windows 7, EXE)

    Hello to everyone!
    The situation is:
    I've made an AIR Application, inside of that is running a native process - EXE file.
    I'm using Flash CC as IDE and tried to use compile that as EXE with AIR 2.6 and 3.6 - results are same.
    So I've insert inside a checking if Native Process is supported or not and the Native process is supported all the time.
    When I've just installed the application and run it - the very first attempt is good - everything is working as a must: internal EXE is called by my Application with necessary parameters as many time as I'm need.
    However if I'll close the App and then will run it again - internal EXE is not starting at all, doesn't depends on number of attempts to re-start of the App.
    So only way is to uninstall, install it back and then you'll be one more session of successful internal EXE-requests, till the next re-start of the App.
    That's it.
    I've tried to "google it" but unsuccessful. Probably the bug is very rare.
    Help me please?
    Update: at compilation with Flash CC IDE it's working all the time with no any issues.
    Update-2: when I'm running installator-EXE, there is going a notification "Same version is installed, etc." and then selected "Run Now" - there is also working with no problems.

    Well, I've found the solution and answer by myself and here is it please:
    In case with same situation as above you need to add just one line in your AS3-code
    nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;
    And you will be happy so much

Maybe you are looking for