Strange device under Device manager(KT4VL)

Hi, under device manager, there is a device called the PCI Simple Communications Controller. It is under the other devices section and says it needs a driver, what is this device and where do I get the driver? Thanks!

i don't know if this is it BUT riser modem slot is a real
short PCI type slot on your M/B and it's enabled from inside Bios.The setting in bios is under integrated peripherals normally near the onboard sound Setting,if you don't have a riser modem,Disabled It.(It's the MC'97 modem line,i've just checked my M/B book)
When it is enabled and NO modem,your op system looks for the modem and gives two modems or problems sometimes.
Cheers lonfa

Similar Messages

Strange root certs in device manager

When I opened the device manager (preferences -> advanced -> certificates -> security devices) I was surprised to find the following entry under "Root Certs":
path /home/<user name>/.mozilla/firefox/<profile name>/libnssckbi.so
The corresponding file does not exist at this location (the correct location is /usr/lib/x86_64-linux-gnu/nss/libnssckbi.so).
I'm wondering how this entry originated, and whether it should be deleted? It is dated Nov 2012. A fresh profile does not have any root certs in the device manager.

''cor-el [[#answer-693597|said]]''
<blockquote>
The correct location of the libnssckbi.so file would be the Firefox installation directory and not the Firefox profile folder (~/.mozilla/firefox/).
</blockquote>
Indeed. I have never set this preference manually, so I'm wondering what the preferences->advanced->certificates->security_devices->Root_Certs preference does, and whether setting it to a strange value could compromise security?

My iPod touch 5g is not syncing, opening in iTunes, charging, or showing up under Device Manager

My USB connectors are working--my brother's 4g iPod Touch could charge fine on my PC.
THis iPod is relatively new--August of 2013--and I have not had trouble with it before.
I guess it started when my iPod ran completely out of power, as it sometimes does. However, this time it would not charge right away and showed the "Low Battery" screen (The charge bar with the little bit of 20% red charge, with a symbol of a USB charger and a lightning symbol underneath).
It wouldn't charge, sync, or connect to my PC, so I left it in the wall overnight. In the morning it was fully charged--I think it is only able to charge in sleep mode. When plugged in via USB cord to the wall or computer, the little lightning sign, symbolizing that it is charging, does not appear.
When plugged into my PC, under MY COMPUTER, instead of reading "Apple iPod," there was some USB link, including "F://".
Upon clicking it it read : F:// refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location. I stupidly DELETED this file and emptied my Recycling Bin. I cannot find my Apple iPod in Device Manager or anywhere. Please Help! I need to charge my iPod. Can I somehow restore my iPod without iTunes?
I will do this if I have to,but I would rather not have to reinstall all my apps, contacts, etc.
I have tried uninstalling (by going into Control Panel and one-by-one completely deleting everything Apple-related, including iCloud and Safari), then reinstalling iTunes; resetting my iPod; restarting my computer. Both my iTUnes and iPod are updated to the most current version. Do I need a new battery?

You need iTunes 11.1 or later on the computer
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My wireless adapter is not showing in my device manager under network adaptors

I have a Pavilion, model p6210f with Windows 7
I have used it for 2 years with an ethernet cable and now I need it to go wireless, however, no wireless adpater is showing in the device manager under network adaptors, only showing the LAN.
Checking the specifications for this model at the hp website, it should have a 56K Win Modem.
Don't know what to do except go buy a USB Wireless adaptor, any ideas?
Called tech support, but I was given no assistance.

Hi:
Below is the link to the product specs for your PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01852858&tmp_task=prodinfoCategory&cc=us&dlc=en...
The PC does not come with wireless networking capability - only a wired ethernet adapter and a dial up modem.
The easiest thing to do is to purchase and external USB wireless network adapter.
Below is a link which will give you plenty of choices to consider. Look at the reviews and buy one that best suits your needs. You will of course, also need a wireless networking router.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=100006519&isNodeI...

Can't start device-manager.exe under Vista

Can't start C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\bin\device-manager.exe under Vista 32. It works fine under Windows XP
error is java.net.BindException: Address already in use: JVM_Bind
I changed C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\toolkit-lib\modules\bootstrap\conf\system.properties
I tried
device-manager.object-registry.host: 127.0.0.1
device-manager.object-registry.port: 61309
no success
my C:\Windows\System32\drivers\etc\hosts consists
127.0.0.1 localhost
::1 localhost
error output is
[   2408] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-ConnMg
rBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Midle
tMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Midlet
MgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Profi
lerBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Profil
erBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
ConnMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-C
onnMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
MidletMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-M
idletMgrBridgeFactory
[   2410] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceAddre
ssManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceAddres
sManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceRegis
trationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceRegist
rationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on RapiClientS
ervice
[   2500] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.createServerSocket(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.run(Unknown Source)
[   2547] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
...

I am having the same problem here with Windows 7 64bit. Why are most of Oracle forum posts are left unanswered. Found many people having similar problems, but nobody seems to have the answer. Anybody, please help
Thank you in advance
Regards,
pra

G470 Bluetooth not listed under Device Manager and not working

Hi,
Can someone teach me how to solve my G470 problem?
Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
Before that, it isn't working at all.
Thanks
Solved!
Go to Solution.

hi athirah11,
Welcome to the Lenovo Forums.
Can you try the following:
1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
- Link to picture
- Link to picture
2. If the bluetooth device shows up under the Device Manager, do the following:
a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
b. Run the Bluetooth Driver Installer
- this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ipod not recognized. yellow ! mark shows up under device manager

I have acquired a 30gig 5 g ipod. I also had an ipod mini that worked perfectly but was stolen. When my ipod is plugged in, it doesnt appear under " my computer". I did find it under the device manager but it has a yellow ! mark beside it. I also found that when i plugged in my other storage devices (flash drive, sandisk) that normally worked, also share the same problem as my ipod. What does this ! mark mean? i havent been able to figure it out and amy direction that someone would be able to share would be most appreciated. Thank you for your time in reguards to this subject and make it a great day!

Almost certainly your drivers for usb/firewire (whichever you're using) are screwed. Try ininstalling then reinstalling the hardware. You don't have to actually remove anything, you're just telling windows to forget hardware, then asking it to detect any hardware it didn't know about, and install it.

Does Cisco Fabric/Device Manager 5.0(4d) run under VM?

I'd like to upgrade the OS on our W2k3 to W2K8 64-bit via virtual machine. First, is it possible to run Cisco Fabric and Device Manager under VM 2K8 64-bit? Has there been any issues reported running these tools, on VM?
Thanks

Hello Jayson,
Yes, Cisco Fabric Manager and Nevice Managercan run on W2k3 to W2K8 64-bit VM
http://www.cisco.com/en/US/partner/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_504d.html
VMs:
VMs that run any qualified or supported operating system version can run Cisco Fabric Manager.
Thanks

Unknown Device Under Device Manager After Doing A Win8 Pro Upgrade!

I have an HP Pavilion dv7-6b32us notebook computer. I just installed Windows 8 Pro. I looked under Device Manager & I have one Unknown Device now. I installed all of the drivers, so I don't know what it can be. How can I find out? I'm attaching some screen shots. Thanks for your help and time!
This question was solved.
View Solution.

That is the HP wireless button.
Download and install the HP wireless button driver .
Please report your results here in your thread.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

FWSM missing under Campus Manager Device Management

Hello everyone,
We are running LMS 3.2 with CM, CS, RME, etc. patched to the latest release.
Under Campus Manager -> Admin -> Data Collection -> Device Management -> Include Devices, all available devices have been added. However, our Firewall Service Module (and some other ones) are missing from the list of included devices.
The FWSM is listed under DCR and RME though. It passes and runs inventory collections and SNMP credential checks. The FWSM is running code version 4.1(1).
Is this normal behavior or should it be possible to add it to the list in CM?
Thank you.

Yes, this is expected. Campus Manager does not support firewall devices like the FWSM, PIX, and ASA as they do not support CDP.

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Ipod classic 7 gen, windows 7 32bit won't install usb driver. in device manager, exclaimation mark under other devices, it says no driver loaded.

I have uninstalled any programs that looked starge or might be causing conflict.
uninstalled everythign to do with itunes or apple, rebnooting and diong a fresh install.
my older ipod works fine.
updated intel usb chipset drivers.
i have tried any instructinos i can find online.
I tried updating the "ipod" driver in device manager, I point it to c:\windows\system32
it gives me a starge message saying it can't install the mass storage device, somethign is wrong . . . .

Hi mycaddigo,
Welcome to the Support Communities!
You may have tried some, but not all of the steps outlined below:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Judy

Yellow mark in device manager under other devices pci driver for B50 laptop with Windows 8.1 64 bit

Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.

Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Win 7 Home Premium with X-Fi Titanium - What Should I be Seeing in Device Manager Under Sound...

[Just changed configurations. Went to a single graphics card and moved my X-Fi Titanium Pro to a now open slot well away from the new graphics board. New graphics drivers went in smoothly and show up correctly in Device Manager. The audio seems to be working but it looks like Win 7 installed a bunch of generic "High Definition Audio Device" drivers in addition to a single driver for "Creative SB X-Fi". So what I have now is the one X-Fi driver and four "High Definition Audio Device" driver entries. This appears to be different compared to the Device Manager entries that existed before I changed slots.
Anyone know what I should be seeing? If this is wrong what's my best course of action? Uninstall all the Creative stuff and then reinstall?
Thanks in advance for any help provided.

Hi there!
It seems to me that you didn't disable your onboard audio device on the BIOS.. The other high definition audio device can be the HDMI devices for your videocards...
But, if there's a X-FI among the audio devices, it should be working properly. It's the only device the X-Fi presents on device manager...
So, check if your onboard sound card can be disabled via BIOS, and the try deleting the other devices in device manager and restarting the PC. If the X-Fi is being detected more than one time, it will solve the problem!
Tell if it works!

Sony z3 not showing up in google device manager

Sony z3 not showing up in google device manager
I have checked the mark under security....
same with my new sony z3 tablet.
Solved!
Go to Solution.

Strange thing. Are you willing to try the repair? Do it with PCC if you want to:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Strange device under Device manager(KT4VL)

Similar Messages

Maybe you are looking for