Strange dialing sound after PS 14.1.1

Hello guys,
Since I've installed PS 14.1.1 I'm hearing a dialing sound whenever I load a .psd file.
Today I also heard the signal when I was moving a layers in the file.
I've made a quick Google search, but unfortunately I wasn't able to find a solution.
The song is just like entering digits to try to call someone.
Best Regards,
Dimitar M.

There are indeed bullets in a text block and also I've made a couple of tests only on the same .psd
I've check on different .psds and the dialing sounds doesn't occurs.
I'll update the PS to 14.1.2 and hope to see any difference because this is pretty annoying.
Best Regards,
Dimitar M.

Similar Messages

Strange clicking sound on my Lumia 930 arround the...

When my camera is not activated, if I mildly shake my Lumia 930 I can hear a strange clicking sound on the upper part of the device, just arround the camera lense. Can it be the lenses just shaking, because when the camera is activated that sound disappears.

Hi, Tomislav5. Welcome to Microsoft Mobile Community. How long have you been noticing this issue? Did you change any settings on the device that may cause this to happen? Make sure that the system apps on the device are all updated. You may check it by going to Store > ... > settings > check for updates. You may also try rebooting your phone by pressing and holding the volume down and the power keys at the same for 10-15 seconds and see if it makes any difference. you may need to set the date and the time after this operation. We'll wait for your response.

Dialer crashes after KitKat

Is anyone else seeing this? Ever since upgrading to KitKat 4.4.2 on Droid Razr HD my dialer crashes after 4-8 seconds. Open up dialer.... try to dial number.... dialer crashes to the homescreen, also it is 50/50 if recent calls will be listed or not. The only reliable way to call a number is to create a contact and dial it that way. It also makes it very difficult to call into an online meeting as I cannot keep the dialer up long enough to put in the meeting code. I have tried several other dialers off the market and they crash also... but tend to last a little longer sometimes. I have done 3 factory resets, and each time the problem comes back after about 2-3 hours. I went to the Verizon store, they over-nighted me a new phone and the same thing happens on it also. It also happens in safe mode. Looking at my battery usage Android core apps is using about 30% (user dictionary, contacts, contact storage). I have turned off the dictionary and stopped all contact syncing. still happens. Looking in running apps, Qualcomm, contacts, sound, and a number of apps are listed as "restarting" after it happens. I have removed all nonessential programs. Anyone? It can't just be me.. after all it is happening not only on my original but also my replacement phone.
Very frustrating... what good is phone you cannot dial?

Itwall, thanks for trying all of these steps. Do you have any kind of physical or liquid damage to the device? How long have you had this device for? I would like to see what other options we might have. Can you please accept my request to follow you. Then request to follow me back. Once we are following each other you will be able to send me a Direct Message http://vz.to/1fbIKzK. I hope to hear from you soon.
KevinR_VZW
Follow us on Twitter @VZWSupport

No Sound after installing Xfce

Hello, I'm having a strange problem. After installing xfce I've got no sound in my system. I have an Asus Xonar DX and usually the only thing I needed to do after installing a new system was to select it in the audio controller but this time it doesn't work. I tried uninstalling xfce4-mixer and install paprefs pavucontrol and set the card there but it doesn' t work and I don't know what else to try.
http://i60.tinypic.com/6i6wcl.png
Any help would be really appreciated. Thanks.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Herbalist wrote:Muting S/PDIF in alsamixer seemed to fix this problem as suggested in this thread https://bbs.archlinux.org/viewtopic.php?id=156502
How do I do that ?
http://es.tinypic.com/r/250nywj/8

No sound after making a Facetime Call on Macbook Pro

Hello everyone,
I have a mid 2011 macbook pro with Mavericks installed. Whenever someone calls me on Facetime on my Macbook there is a strange sound coming off the speakers like they are broken. I was scared at first but I thought there is only a problem with Facetime. However, today after I made a call, speakers stopped working for good. I restarted my macbook and there were still no audio. I found a solution by making a hard restart. I am scared now to use my Facetime again on Macbook. Is there anybody who knows why this happen? This issue started when I installed Mavericks I think. Also sometimes, I cannot do any facetime calls due to the strange bubble sound out of the speakers..

Hi,
As far as I know you log in with your Apple ID.
To make a call you have to add your friends by entering their email or phone number. If you have already added them, you just have to click on the contact you want to call and click the button Facetime. Now your friend has to accept the invitation and then you'll see each other.
For more information have a look at the iPod Touch user manual:
1. Click on that link: https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits& RequestTimeout=500&calledFromFrame=N&applicationid=338019&fccid=
2. After that click on "Full user manual"

Strange dial tone

Hello, just noticed recently when I pick up the phone I have a strange dial tone.
It sounds like the normal one but then the tone lowers, then comes back up, then down again. Kind of like a siren on a police car/ambulance only not as loud.
Any idea what could cause it, there is only one socket in the house, and we only bought a new phone back in October, broadband speeds all seem fine and I have removed the sky box to also see but its still there.
We have an overhead line and some quite heavy rain a few nights back, was wondering had the connection box on the side of the house got damp and would I be charged for someone to come and look at it?
Many thanks

Hi,
I've been researching this issue on the internet and came across this post as it sounds exactly what has happened to us.
On bank holiday monday, we set our phone on divert #21# as usual when we spend a day out. We came home only to find we had a strange ring tone (sounds like a siren) and we can't make any outgoing call, nor can we switch off the divert. Even though we can't make any outgoing calls, the divert still works so we can take calls on our mobile.
It is very strange. We have reported the fault with BT who have checked the line remotely and say it looks fine. We have test our internal equipment, and also tested a phone through the emergency socket which runs into the master socket. We still get the same ring tone.
BT.com/faults suggest now that it may be something not right near our home.
Did anyone on this post get their issue resolved? What was the issue?
Many thanks!

FaceTime making strange clicking sound

FaceTime making strange clicking sound
When FaceTime calls from my MacBook through my iPhone 5 work its a great feature. When it fails, extremely frustrating. I often experience a loud clicking sound when trying to place calls. I can be heard by the person I am calling but I can't hear them, only the clicking. Restarting worked for months to eliminate clickling which seemed to happen after using the headphone port now nothing seems to work predictably, even lost all sound from attempted calls today even after restarting although everything worked fine yesterday. Running MacBook Pro (13-inch, Late 2011) with OS 10.10.2 and an iPhone 5 with 8.1.3. Would love to see a permanent fix that includes the ability to see voicemail messages on my Mac.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

New iMac20, strange clicking sound

Hi,
I have had my iMac 20" MB324RS/A for about 2 week, and from first day I have strange clicking sound like a clock "tick-tock" with 2-3 sec frequency. There is no dependence between this noise and CPU/HDD/CD load etc.
I now, somebody have a troubles like this, but only when display sleepeng. My iMac have this clicking every time after "Power On" regardless of OS was loading or not.
Sorry for my English

Well... looks like any 5400rpm drive produces such a clicking sound, even though I've never heard it on a 15" PB 1.5 Ghz et al.. The new Hitachi HD isn't as bad as the other one (Toshiba), yet the sound is still very noticeable.
Guess I got to get used to it. On the Titanium PB, the fan kicks in when charging the battery for about 15 min, so a PB 12" with a clicking HD might not that bad.
Traded a yet jet engine for a movie projector, he he he.
The display doesn't look quite as good the TiBook's and it's got a fairly poor viewing angle, yet I knew that already. Besides that, you got to love the 12" PowerBook!!! There's a significant speed increase (1.5 Ghz 1.25 GB Ram, bigger, faster HD vs. 867 Mhz, 768 MB Ram) and - thanks to DesktopManager - the smaller screen is very usable for most tasks. It's much more portable than the 15" and the best of all, all my third party (PowerPC) menu items, preference panes, Latex installation, applications work perfectly. Cloned the TiBook HD and I was up and running within 2 h, thats how long it takes to copy 40GB via FW 400.
Let Apple roll out some great Intel machines and software developers universalize their apps. In the meantime, I'm carrying around a cute little PB. Buying a PowerPC Mac today is a reasonably choice, if you're like me and need to support a bunch of Macs around you. Software reliability is another key point. Joe Average might be tempted to get a fast Macbook though.
Who knows, maybe Apple comes up with a 12" PB replacement tomorrow, which is so good, I'll be kicking myself he he he. Wish list: HD screen (without any strange lines, of course), back-lit keyboard, thinner and lighter, Core Duo.

Strange buzzing sound under keyboard!!

I keep getting a strange buzzing sound sometimes when I use my macbook. And its not when im using a specific application. It just randomly starts and only stops if I shut the laptop. And after that if I try to open it, it starts to make the sound. What should I do?

wow took me forever to create an account to reply to this.
I've got the same problem on my aluminum macbook.
the sound is quite loud and can hear it over some background noise. it doesnt sound like a typical fan / disk. because i can identify the sound of the fan when it turns on and it doesnt start stop when alot of disk read/writes are happening or stopping. but say it is the disk, im worried.
since there arent a huge swash of people reporting this issue, im guessing its not normal behavior.
lucky buggers in the states can take their units back to the apple store and get it sorted. here in hong kong you've got to argue beg and plead to convince the distributer staff to replace the unit. which also means id be without this computer for some time while they figure it out.
Has anyone taken their macs back and gotten it fixed or exchanged? or is this pushed back on as normal behavior?

No sound after upgrading to Windows 7 M55-S3293

I upgraded to Windows 7 and installed the drivers from Toshiba for my sound card and before installing checked the windows XP box under the compatibility tab. No sound. I did windows update for this driver and it installed an updated driver. No sound. I went to Realtek and installed the windows 7 generic driver for this sound card (thats all manufacturer's offer is a generic driver) and LOW sound. Now I rebooted and back to No sound.
Before windows 7 sound, after no sound.
Toshiba put out a fix for a contextant audio driver for the low sound problem to be corrected with windows 7 but I cannot find anything for my computer.
I don't know know what to do! I don't want to go back to using XP but sound is REALLY important. I would think this is an integrated sound card (Toshiba isn't making service manuals public anymore, it was there the other day and gone today) so I cannot remove it. I don't think I have any available PCI slots to install a new one internally and I don't want extrenal speakers since I do a lot of traveling.
Is there a fix I don't know about? What can I do? Please HELP!!!

Hi Ryan,
Go here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=1671893&pf=true
and download the software called "Sound Utility to Turn Mute Off After Upgrading to Vista", it is made for people that upgrade to VISTA, however, once you have all your Toshiba updates installed by downloading the Toshiba updates, then apply this update to your Windows7 system and the problem will resolve.
I don't know why they did not make this update part of the Toshiba Update Package.
I hope this helps,
best,
Alejandro

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Lost ipad sound after upgrading to ios7

As soon as I click the iOS7 upgrade my ipad volume is gone

First thing to try if you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Still no luck - try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.
If that fails, then try resetting all settings. Settings>General>Reset>Reset all settings. No data will be lost but all device settings have to be entered again.
Should you still have no sound after trying all of these steps, restoring the iOS software would be the next thing to try.

Mac mail makes no sound after sleeping

Why does Mac Mail stops making the new mail alert sound after falling asleep? How can I solve this?
I have to close mail, wait a few seconds, then reopen to restore the sound. Very annoying.

Reset The Pram
http://support.apple.com/kb/ht1379
(Try several attempts to get the corect sequence)
Reset the SMC
http://support.apple.com/kb/ht3964

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Strange dialing sound after PS 14.1.1

Similar Messages

Maybe you are looking for