Strange Diming Screen in InDesign after CC 2014 upgrade

Hi,
Since Upgrading to Adobe CC 2014 I have noticed a really strange diming of my preview screen in InDesign. I also noticed strange diming in Photoshop too.
Anyone out there had the same issue?
Thanks
Laura

Ok I've just tried to view it on my other
monitor and it doesn't do it.
The offending monitor is a Philips 231S Plus plugged in via DVI and the other is a Philips 226VL plugged in via VGA.
When you straddle the window between the two monitors it doesn't happen.
I have attached a video of the dimming effect. Please note the grey border disappearing and the white turning grey.
Laura

Similar Messages

Enabled fonts not showing up in InDesign after Mountain Lion Upgrade

After upgrading to Mountain Lion, fonts that are enabled in Font Book (Adobe open Type) are not showing up in InDesign CS5.5.
However, if I go to Font Book and disable the fonts, then re-enable them...they will show up in InDesign.
Anyone know how to fix this?
Thanks!

It sounds like a small glitch in your Mountain Lion upgrade. If you're just done an in-place upgrade (not a clean install) these things can happen.
It sounds like you've found the workaround. But if you discover other problems with the upgrade, you should consider a clean install. Do a Google search on "clean install Mountain Lion" to find out how.

Black screen in Iphoto after Snow Leopard upgrade

Hi, I've just upgraded the OS to Snow Leopard and now when I try to view or edit in iphoto the photo appears and then the window goes black - has anyone else seen this? Any suggestions how to fix, I've rebuilt the photo library but this hasnt helped.

Sometimes it helps to know you're not alone. I'm facing the same thing. Called Apple Support. They told me to reinstall iPhoto '09 (which I did), rebuild the libraries (which I did). Still getting the same problem.
I also find often that when I attempt to crop a photo, the screen image distorts and stretches to the desired size, instead of crops.
Something to do with the way Snow Leopard uses Open GL?

My iphone 4S screen keeps freezing after the iOS6 upgrade. Can I roll back

Can't stand these glitches anymore. Browsing on my iphone has now become irritating to say the least. Sometimes when I an typing, there is a lagged response. Its such a turn-off!

No, you can't roll back. But you can probably fix the issue you are having with iOS 6 with a little searching the forum and support articles.

After clicking on "Upgrade.exe"

1. After clicking on "Upgrade.exe" -->
2. "Welcome to the SAP Business One CD Launcher" screen appears -->
3. after clicking on "Upgrade" -->
4. two options come -->
5. after clicking on "Server" -->
6. four options come -->
7. after clicking on any of the options (for e.g. upgrade add-ons) -->
8. a description and a option "Upgrade" come -->
9. now clicking on the above "Upgrade" option the screen comes back to the step 6....
please any one can explain the reason behind this problem?
for
SAP B1 2007 B SP0 PL7
Windows Server OS 2003 + SP 2

when clicking upgrade.exeit will show upgradewhen click upgrade,it will give u 2 options i.e. server and client.
click on the server it will give u next 4 options.
1stly click on server tools,
then after the server tools upgrade is complete it will again come to same screen automatically from where u clicked the 1st ootion
2nd click on common upgrade..........similarly after complete again to same screen
3rdly help upgrade
and last is addon upgrade..
always RUN them in the sequence as shown ...never run it like addon 1st then server.......
after that take the back up of ur database....login into sap b1..it will ask for upgrade click ok......and wait for a momeny untill upgrade complete..
by this way u will never get any error.
Regards,
neetu

I cannot open any documents in Indesign after downloading Yosemite. Says I need Java 6. I have Java 8 and still doesn't work. Please suggest.

I cannot open any documents in InDesign after downloading Yosemite. Says I need Java 6. I have Java 8 and still doesn't open.

It may seem strange indeed, but yes, you have to ALSO install the older version 6 for Apple's system; other applications will use your Java (which I believe is now even 9) and others will use that version 6.
Download directly from Apple here:
Java for OS X 2014-001

How to reactivate the welcome screen of indesign?

how to reactivate the welcome screen of indesign?

Thanks, but it seems that there is no welcome screen in CC.
Jeronimo Nilson
Em 10/06/2014, à(s) 20:16, Fede Gianni <[email protected]> escreveu:
how to reactivate the welcome screen of indesign?
created by Fede Gianni in InDesign - View the full discussion
this is CS6, but maybe is still there
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6448823-645751/Screenshot2014-06-10at18.15.08+.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6448823#6448823
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1

I have this on both machines running 10.10.1 OS X and AE 2014. I see on line that others are having this issue. I think it needs a Patch ASAP.

Hello. Basically I can create a new comp that is set to 1920 x 1080, @ 30 frames per second for 1 minute TRT. I create a new solid layer, say red. I hit space bar or play on the screen, and it does not play in real time. ITs on my Imac as well. same OS and Same Version software.
After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1
created by Dave LaRonde in After Effects - View the full discussion
Well, before you hit the panic button, why don't you tell us precisely what you're doing when AE plays at 17fps -- the keys you hit, the buttons you click to begin play.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7102588#7102588 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7102588#7102588
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Geoffrey M. Wetzel
[email protected]
[email protected]
302.353.0798

Opening from sleep. Strange Loading Screen.

So sometimes when I close my lid on my mac, it obviously goes to sleep. I haven't been able to see a pattern yet, but sometimes when I open up my screen/lid, something strange happens. It makes that sound right before the C note when you turn on the computer. Then my log-in screen has a white tint to it, with a loading bar on the bottom. It takes maybe 3 minutes for me to be able to type my password in, to unlock my computer. I wanted to see if Anyone knew why I am having this strange loading screen and if there is anything I can do to fix it. Thanks so much.

After an attempt by the store to reset the SMC over the phone, the % is now down to 98. Was 99 since I bought it last week.
I will try this reset today and check tomorrow morning;
Shut down , unplug charger , wait 15 seconds , plug in charger , restart.
Do you guys think this is the hibernation feature alluded to elswhere?
Would it affect all laptops ? Would hate to go and exchange for a new one only to have the same problem a week later.
I'll work on battery today and see what happens. When I have opened the lid on a few mornings after unplugging the charge it has started fine and quickly, milliseconds , no white screen.

Strange green screen problem while playing movie

For the first time I purchase a movie from iTunes Store, As I started playing it neither I could hear the sound nor I could see the video but after much of effort of re-starting my iTunes and MacBook, it started to play but while playing the movie if I shift to full screen mode, a strange green screen appears for a second or two and then plays normally and if while playing I return back to normal screen, the green screen never goes, then again I have to stop the movie and restart iTunes to be able to play back the movie normally. Does anyone have any idea about this strange problem?

Hi Maen Abdulhaq,
“When I start games like Red Alert2 and a lot others”, ” I don't think that this is a manufacturer problem since it's very common to all those having windows 7 x64 and trying to play such games”
Did this issue occur in the whole games or just the Red Alert2 in your machines ?
“unfortunalety windows compatibility settings”
Have you tried in windows 98 or lower compatibility mode, please ensure you have choose run as an administrator?
Apart from this ,I recommend you to try this method.
create a shortcut of "Yuri.exe" (or "Game.exe" if running normal RA2), and place it on the desktop. Open the properties, and in the target line add "-dxlevel 8" to the end. It should look like this (or similar if you're directories
are different).
"C:\Program Files (x86)\EA Games\Command & Conquer The First Decade\Command & Conquer Red Alert(tm) II\RA2\YURI.exe" -dxlevel 8
Meanwhile, entering Intel HD Graphics control panel (via Windows Control Panel or right-clicking the desktop) and enter Power section. Choose "High performance" mode.
If the issue persists, I recommend you to disable one graphic card from the device manager to have a check considering you have two graphic cards.
Best regards

Unable to boot Z10, stuck on loading screen at 99% after a few hours.

Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions. Running a Bell Canada 10.1. Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%. I tried plugging it in BB Link and computer will not recognize it.

dazedandconfused wrote:
Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
I've answered your thread already, here:
Re: Z10 stuck on loading logo on starting up
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Voice memo screen disappears right after I open it.

Voice memo screen disappears right after I open it. The last voice memos I recorded seem to have disappeared.
iPhone 4 iOS 6.1.3

have you tried the general cure for most issues?
http://www.apple.com/support/iphone/assistant/phone/#section_1

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

HT4279 ATI Radeon HD 5870 screen resets size after after sleeping. Why?

Purchased an ATI Radeon HD 5870. When connected to 1920x1080 it leaves a third of the screen out. However after starting up it fits the screen. Only after sleeping does it reset to this faulty screen size. I have attempted every Mini dv adapter vga,dvi and hdmi. All lead to the same issue or another.
Is this card defective? Is this an issue with the Lion OS?

Ok let me go into more detail for you.
Macpro had 2 Geforce gt 120 video cards. I recently had some blocking issues ( where the screen just over lays a bounch of boxes with random parts of the background and or aps running). Decided to upgrade to the Radeon 5870. Before the upgrade i have been using a Samsung LCD tv and and old Dell monitor. Worked great. Tv res was set to 1920x1080. Instailed the new card. Hooked up the Dell to the DVI output and Tv to a Mini DV at first using the Mini DV to DVI. Ended up with the half the screen issue. Took the back and got the Mini DV to HDMI. I didnt have the size issue but when set to 1080 it was not hidef. Took that back and got the Mini DV to VGA. Now here is where I currently am stuck. When both the TV (Mini to VGA) and the Dell (VGA to DVI) are connected to the 5870 and the harddrive and monitors go to sleep it resets and i lose an 8th of the screen. I currently am just using the TV and everything seems to be fine. Also on the amount i lose there is a dotted line that some times flickers. Not sure if that means anything.

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

Strange Diming Screen in InDesign after CC 2014 upgrade

Similar Messages

Maybe you are looking for