Strange discrepancy with adjustment levels

Using CS4 on a MacBookPro with OS 10.6.2.
Being a very experienced user, I suddenly encountered a weird thing that doesn't go away restarting the computer or resetting PS:
When I have the levels dialogue (cmd+l) on the screen, I tweak the settings until I see what I want to see, like always.
HOWEVER, when I then click OK to accept my adjustment, the image CHANGES.
Looks rather similar to switching between RGB and CMYK-preview, or even more drastical.
This makes the whole dialogue completely useless, since what I see is no longer what I get.
Same problem with the other adjustments - curves, saturation.
What I see in preview is NOT what I get after accepting.
I can trick it by using an adjustment layer in stead, since that obviously doesn't involve clicking OK.
BUT! When I than flatten the image or merge the adjustment layer down on to the image layer, the same thing happens: the image changes appearance.
Can't begin to imagine where the problem might lay - anyone got an idea??
Have run this program on this computer with this monitor for some time now, and the strange behaviour just started today, out of the blue.

Yes, you were right.
With "bizarre" I meant that I never noticed the effect in more than 10 years, having spent probably in the thousands of hours in Photoshop, all the way back to the Stone Age version 4.
In fact, I tried different files and could NOT reproduce the effect, except with the one file that caused my alarm.
It was a shot of a very textured metal surface, and I am of course well aware of the fact that PS cannot depict 16,6% of a pixel, hence the moire and general noise.
I was amazed, however, to see how much of a discrepancy the levels caused at this magnification.
Anyway, point taken, case closed. Thanks.

Similar Messages

Adjustment Level Error

Hi all
I have got consolidation rules using the adjustment rules table but when I try to order this rules with Adjustment level field, the stored procedure produces the error.
If I only put "1" in one rule the package works fine when I make a consolidation with a group with a perimeter with all entities, but when I select groups with a perimeter with less entities the consolidation package doesn't works. The only way is quit the "1" from the automatic adjustment rule
Execute formulasError
SPRunConso Version 7.5.105
ERROR CSD-150 Problem extracting Data : C_REPART
ERROR CSD-160 Problem extracting Data : C_CONSO
10000051 - 340 Rows Calculated
10000051 - 0 Rows Updated
I saw other post and have the same problem
Do you have any idea?
Thanks in advance

Hi Nilanjan
I have 2 rules in the Automatic adjustments table:
In short, Rule 1 should be executed first as Rule 2 should be based on the results of rule 1.
Rule 1: Non Group part cancellation for Proportionate units
Adjustment level = 0
Adjustment type = Proportional
Rule 2: Inter-company elimination
Here the adjustment level = 1
Adjustment type = Generic
When i run the following stored procedure:
*RUN_STORED_PROCEDURE = SPRUNCONSO(%APP%, %CATEGORY_SET%,%CONSOSCOPE_SET%, %SCOPETABLE%,%LOGTABLE%)
The correct results are posted but the package displays as failed with the error message as per the first message in this thread.
The help states the following, which is exactly what i need:
Adjustment level
This field must contain an integer value ranging from 0 to 99 and can be used to order the sequence of execution of the various ELIM rules, if desired.

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Adjustment Levels Bug

Hi, i'm using cs3 and i've got a weird error with adjusting the levels of an image.
All i have done is create a black background layer, added some noise, then i want to edit the levels. Unfortunately the image changes as per preview but whatever i change the settings to, it reverts back to the orginal set up when i press ok.
I have literally no idea what is going on and why, more to the point. Really frustrating.
Please help.
Thanks

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Strange Problem with Forms (Smart Forms)

I have lately been experiencing a strange problem with standard forms in the system. We have WebAS640 / ECC5.0 System. Soon after the initial run of patches, most forms in the system are showing the character '#' in place of formatted texts.
I have searched the internet and most forums, but have not found a solution. Since this is the standard forms that i am talking about (unmodified and untouched) so i assumed this had something to do with our patch levels. However that is only an assumption.
In particular i am having problem with the billing invoice type RD00, form name: LB_BIL_INVOICE. I have traced the problem to this much. The form shows the expected text, where no character format is applied to it. And where ever there is some character format, it just shows a string of hashes ('#'). The style being used by this form is LO_STYLE.
I am also listing my patch levels in case that helps.
SAP_BASIS     640             0014
SAP_ABA             640             0014
ST-PI             003C_640     0001
PI_BASIS     2004_1_640     0006
SAP_BW             350             0012
SAP_HR             500             0005
SAP_APPL     500             0006
PI             2004_1_500     0004
EA-IPPE             300             0004
EA-RETAIL     500             0005
EA-PS             500          0005
EA-HR             500          0005
EA-GLTRADE     500          0005
EA-FINSERV     500          0005
EA-DFPS      500          0005
EA-APPL      500           0005
Hope somebody can help in regard

Hi Ashan!
Interesting problem. You are seeing replacement characters, because assigned font(size) is not installed (somewhere, SAP or printer).
But since this is completely standard, open an OSS-request - maybe it's not as fast as SDN, but I'm sure you will get a qualified answer (and solution).
Regards,
Christian

Adjustment levels

Many times when I make a new adjustment level, CS6 defaults to "Levels" even though I had selected "Threshold" or Color Balance".
I am trying to do an accurate color adjustment using the "Threshold" darkest and lightest sample point, new layer-50% grey "Difference" mode, then back to "Threshold"
to find grey point. Having marked these points, I go to "Curves" and select my points with the appropriate eye dropper tool.
This technique worked flawlessly in

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

[CS5][Save for Web][Anti-aliasing] Fine lines in exported PSD with adjustment layers

Hello,
You can reproduce the bug this way:
- link a PSD with a adjustment (Levels, Brightness/Contrast) layer in your AI file
- Save for Web, with AA for Art (not text) selected
In the exported image there will be artefacts, white lines usually.
Flattening the PSD or deleting the adjustment layers will solve the problem and anti-aliasing will be applied correctly.
I used CMYK/RGB settings, FOGRA39/Adobe RGB 1998 for all the files involved.

Hi,
I am experiencing this same problem of pixelated gifs when I use the "save for web" dialog from Illustrator, but this solution has not worked for me. I have tried the trick of using type-optimized anti-aliasing, but it doesn't change the output at all. I've done this from within the "Image size" tab as well as through Effect>Rasterize>Options)Anti-aliasing: Type Optimized. My image is a logo made entirely from text, although for some of it I used "outline path", so I'm not sure if it still qualifies as text...I'm a newbie at this stuff, so the technical details are still quite opaque to me.
Does anyone know of a solution to this that does not require me to add Photoshop to my workflow?
I'm using Illustrator in CS5, version 15.0.2.
Thanks in advance
Jonathan

Strange behavior with csv flat file integration

Hi,
i've a real strange behavior with csv flat file integration.
I've defined the file inbound with | as separator
Here is the sender payload result, extra columns appears !
<row>
<VAL1>D</VAL1>
<VAL2 />
<VAL3>01</VAL3>
<VAL4 />
<VAL5 />
<VAL6>003160000</VAL6>
<VAL7 />
<col>003160001</col>
<col />
<col>2</col>
<col />
<col>91200604212</col>
<col />
<col>VIRTUAL DJ HOME EDITION</col>
<col />
<col>2</col>
<col />
<col>2</col>
<col />
<col />
<col>2</col>
<col />
</row>
When i changed the separator to ; in my file and in the file inbound it gives the following.
Everything is ok.
<row>
<VAL1>D</VAL1>
<VAL2>01</VAL2>
<VAL3 />
<VAL4>003160000</VAL4>
<VAL5>003160001</VAL5>
<VAL6>7</VAL6>
<VAL7>91200604212</VAL7>
<col>VIRTUAL DJ HOME EDITION</col>
<col>10</col>
<col>10</col>
<col />
<col>10</col>
</row>
Why using a different separator would change the payload ?
It will be a good thing for me if I could use the pipe separator.
Thanks

Can you give the steps you're using to get this error? I'm not seeing any problem here.
1) Create a new audio project (44.1 KHz).
2) Arm the record head in track 1 by pressing the "R" button in that track. Verify audio levels.
3) Record by pressing the record button in the audio controls.
4) Stop recording by pressing the stop button.
5) Play back the resulting audio. Sounds fine.
6) Select File > Export.
7) Change the file format to WAVE file. Change the bit depth to 16 bit, change the sample rate to 44.1 KHz.
8) Type the name SAVETEST.wav and click on the Export button.
9) Play back the resulting WAV file in QuickTime Player, Apple Loops Utility, etc. and it seems just fine.
What am I missing that you're doing?

Strange results with Insert statement having select query

Hi all,
I am facing a strange issue with Insert statement based on a select query having multiple joins.
DB- Oracle 10g
Following is the layout of my query -
Insert into Table X
Select distinct Col1, Col2, Col3, Col4, Function(Col 5) from Table A, B
where trunc(updated_date) > = trunc(sysdate-3)
and join conditions for A, B
Union
Select Col1, Col2, Col3, Col4, Function(Col 5) from Table C, D
trunc(updated_date) > = trunc(sysdate-3)
and join conditions for C, D
Union
.... till 4 unions. all tables are residing in the local Database and not having records more than 50,000.
If I execute above insert in a DBMS job, it results into suppose 50 records where as if I execute the select query it gives 56 records.
We observed following things-
a) no issue with size of tablespace
b) no error while inserting
c) since query takes lot of time so we have not used Cursor and PLSQL block for inserting.
d) this discrepancy in number of records happens frequently but not everytime.
e) examined the records left out from the insert, there we couldn't find any specific pattern.
f) there is no constraint on the table X in which we are trying to insert. Also tables A, B, C....
I went through this thread -SQL insert with select statement having strange results but mainly users are having either DB Links or comparison of literal dates, in my case there is none.
Can somebody explain why is the discrepancy and what is the solution for it.
Or atleast some pointers how to proceed with the analysis.
Edited by: Pramod Verma on Mar 5, 2013 4:59 AM
Updated query and added more details

>
Since I am using Trunc() in the where clause so timing should not matter much. Also I manually ruled out records which were updated after the job run.
>
The first rule of troubleshooting is to not let your personal opinion get in the way of finding out what is wrong.
Actually this code, and the process it represents, is the most likely CAUSE of the problem.
>
where trunc(updated_date) > = trunc(sysdate-3)
>
You CANNOT reliably use columns like UPDATED_DATE to select records for processing. Your process is flawed.
The value of that column is NOT the date/time that the data was actually committed; it is the date/time that the row was populated.
If you insert a row into a table right now, using SYSDATE (8am on 3/5/2013) and don't commit that row until April your process will NEVER see that 3/5/2013 date until April.
Here is the more typical scenario that I see all the time.
1. Data is inserted/updated all day long on 3/4/2013.
2. A column, for example UPDATED_DATE is given a value of SYSDATE (3/4/2013) in a query or by a trigger on the table.
3. The insert/update query takes place at 11:55 PM - so the SYSDATE values are for THE DAY THE QUERY BEGAN
4. The data pull begins at 12:05 am (on 3/5/2013 - just after midnight)
5. The transaction is COMMITTED at 12:10 AM (on 3/5/2013); 5 minutes after the data pull began.
That data extract in step 4 will NEVER see those records! They DO NOT EXIST when the data pull query is executed since they haven't been committed.
Even worse, the next nights data pull will not see them either! That is because the next pull will pull data for 3/5/2013 but those records have a date of 3/4/2013. They will never get processed.
>
Job timing is 4am and 10pm EST
>
Another wrinkle is when data is inserted/updated from different timezones and the UPDATED_DATE value is from the CLIENT pc or server. Then you can get even more data missed since the client dates may be hours different than the server date used for the data pull process.
DO NOT try to use UPDATED_DATE type columns to do delta extraction or you can have this issue.

Strange problem with Domain Values

Dear All,
I encounter one strange problem with Domain Fixed Values.
Background:
We have a custom domain ( ZXREF2) created for custom data element(ZXREF2) which has replaced standard dataelement in BSEG for field XREF2. This domain has 12 Fixed values. The idea was to have F4 help for field "Reference Key2" in FBL5N/FBL01 tcodes. It is working fine with these 12 Fixed value, means, on F4 we could see all these 12 values and when selecting a line from F4 the entry got thru the screen validation ( plz note hat this validation is like checking the mandatory value so this is done even before PAI).
Problem:
The requirement was to add a new line to F4 values( tecnically, 13th record in domain ZXREF2). We added this line to domain and moved to Quality system. Its working fine in both Dev and Qality, but the strange problem occured after moving and testing in Production.
In production, we could see all 13 lines in F4 help. <b>BUT</b>, after selecting the new one( 13th one), and after the value appears on screen field, when Enter is pressed, it gives error message "Enter Valid value".
This error message also comes when we enter any value which is not there in F4. That means, system is able to recognize the new value in F4, but falied to validate that.
We thought that, this might be the problem with Buffer, and request Client to re-start the system. Even after system restart, it still gives the same error message.
Please note that, the error message is triggered even before PAI of the screen called. So noway( I already tried system debugging) we can debug this error message to findout the rootcause.
Any quick help would be highly appriciated.
Thanks and Regards,
Prasad.

Hello Max,
I guess DB Utility ( SE14 ) is to be run only when there is a change at structure level, to make Runtime and Database objects in sync. Here, we just added a new line to existing domain, and this added a new row to the Database table DD07T/DD07L.
Could you please expalin it more clearly if your view is different that what I just described.
Prasad.

Strange problem with jpcap library.

Hello everone;)
I have a very strange problem with jpcap. I have ubuntu 8.10, libpcap installed by apt (manually upgraded to 0,9,8) and jpcap 0.7 (installed from deb package).
My code is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package agh;
import java.util.logging.Level;
import java.util.logging.Logger;
import jpcap.*;
import jpcap.packet.Packet;
* @author iceman
public class Main
     * @param args the command line arguments
    public static void main(String[] args)
        try
            Tcpdump interfejsy = new Tcpdump();
        catch (Exception ex)
            Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
//        agh_MainFrame ramka = new agh_MainFrame();
//        ramka.setVisible(true);
    // TODO code application logic here
class Tcpdump implements PacketReceiver
    public void receivePacket(Packet packet)
        System.out.println(packet);
    public Tcpdump() throws Exception
        System.out.println("wszedlem do wykazu interfejsow");
        NetworkInterface[] devices = JpcapCaptor.getDeviceList();
        if (devices.length ==0)
           System.out.println("no devices");
        for (int i = 0; i < devices.length; i++)
            System.out.println(i + " :" + devices.name + "(" + devices[i].description + ")");
System.out.println(" data link:" + devices[i].datalink_name + "(" + devices[i].datalink_description + ")");
System.out.print(" MAC address:");
for (byte b : devices[i].mac_address)
System.out.print(Integer.toHexString(b & 0xff) + ":");
System.out.println();
for (NetworkInterfaceAddress a : devices[i].addresses)
System.out.println(" address:" + a.address + " " + a.subnet + " " + a.broadcast);
When i start this simple code it isn't working correctly. On the output i have only "no devices". JpcapCaptor doesn't see any mine network interfaces. On windows this code works correctly.
Anyone has any idea what is wrong?
Thanks,
iiceberg

Hi, guys,
I also have a similar problem but in Windows. I've been using a W2008 Server for a short time. For what I've seen and have been told, it works like a Vista. I've wrote a program which uses jpcap and winpcap and, first of all, gets the device list.
Well, if I boot my computer and log on with my usual account, which in theory is an administrator, gets 0 devices when I run the program.
Then, if I log on with the actual Administrator account i works perfectly.
And, if after logging and running the program with the Administrator account (NOT just logging on) I log on with my usual account, it works too.
It's like the Adm account has some kind of "top" permission that doesn't go away at logoff. I tried that because I had some other problems accessing the DVD-ROM for writing from my usual account.
I think that I doesn't happen in WXP, but I haven't tested that last problem, yet.
Any ideas??
Thank you.

Automatic adjustments - Adjustment level not working

Hi all
I have got some basic consolidation rules using the rules tables but as soon as i try and control the order in which the rules are executed using the Automatic adjustments - Adjustment level field, the stored procedure produces the error below:
Any help would be appreciated
Byron
TOTAL STEPS 1
1. Execute formulas: Failed in 6 sec.
2. Legal Consolidation: completed in 6 sec.
[Selection]
(Member Selection)
Category: ACTUAL
Time: 2010.P16
ConsoScope: C_ENGEN
[Messages]
Execute formulasError
SPRunConso Version 7.0.116
Warning : Nothing Extract From Ownership for OPENING Period
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
10000015 - 2498 Rows Calculated
10000015 - 0 Rows Updated

Hi Nilanjan
I have 2 rules in the Automatic adjustments table:
In short, Rule 1 should be executed first as Rule 2 should be based on the results of rule 1.
Rule 1: Non Group part cancellation for Proportionate units
Adjustment level = 0
Adjustment type = Proportional
Rule 2: Inter-company elimination
Here the adjustment level = 1
Adjustment type = Generic
When i run the following stored procedure:
*RUN_STORED_PROCEDURE = SPRUNCONSO(%APP%, %CATEGORY_SET%,%CONSOSCOPE_SET%, %SCOPETABLE%,%LOGTABLE%)
The correct results are posted but the package displays as failed with the error message as per the first message in this thread.
The help states the following, which is exactly what i need:
Adjustment level
This field must contain an integer value ranging from 0 to 99 and can be used to order the sequence of execution of the various ELIM rules, if desired.

Strange problem with cut-through proxy

hi
i have configured cut- through proxy on the router with acs.i am facing a strange problem .
my routers's ethernet 3/0 interface ip add is 10.1.1.1/24 and the acs server is 10.1.1.2/24 and the host ip is 10.1.1.3/24
my routers' e2/0 interface is connected a server running a website .
int e2/0
no shutdown
ip add 20.1.1.1/24
exit
the webserver is running on 20.1.1.2
my router's config
aaa new-model
aaa authentication login default group tacacs+
aaa authorization auth-proxy default group tacacs+
aaa authorization exec default group tacacs+
tacacs-server host 10.1.1.2
tacacs-server key cisco
ip http server
ip http authentication aaa
ip access-list 101 permit tcp host 10.1.1.2 eq tacacs host 10.1.1.1
ip auth-proxy name auth http
int e3/0
no shutdown
ip add 10.1.1.1/24
ip access-group 101 in
ip auth-proxy auth
exit
on the acs server in the tacacs+ ios
i have selected auth-proxy in the services for users and groups
i have created a user john with privilege level 15
have selected auth-proxy and custom attributes
proxyacl#1=permit tcp any any priv-lvl=15
i get the auth-proxy login page when the host on 10.1.1.3 is trying to access 20.1.1.2 web site .
after putting the login credentials i get authentication failed
i tried the debug. i see the router is sending the authentication login and password and getting the status from the acs as pass. i also see the auth-proxy triggered. in there i see
AUTH-PROXY PROTOCOL NOT CONFIGURED.
could someone pls help me what could be the problem. i am have tried many times to get this work. but not fortunate enough.
am i missing on any commands on the router or on the acs. i tried doing as the example mentioned in the student guide but still failed. pls help. waiting for some reply.
sebastan

Check out the following link...
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080450b5e.html

Strange issues with Liquorix Kernel (no network)

Hi all,
I have a strange problem with the Liquorix Kernel from AUR. It builded fine, without problems, but when I boot it I don't have network-access. I'm on an old Asus V6 (Pentium M, Centrino platform).
Some informations:
find /lib/modules/$(uname -r) -iname \*ipw2200\*
gives:
/lib/modules/3.1.0-lqx/kernel/drivers/net/wireless/ipw2x00/ipw2200.ko.gz
while modprobe
modporbe ipw2200
gives nothing.
dmesg:
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
cfg80211: failed to add phy80211 symlink to netdev!
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
skge 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
skge: 1.14 addr 0xfbffc000 irq 18 chip Yukon-Lite rev 7
skge 0000:03:00.0: eth1: addr 00:11:d8:9f:df:f5
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
NET: Registered protocol family 31
avahi-daemon[1998]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
avahi-daemon[1998]: Successfully dropped root privileges.
avahi-daemon[1998]: avahi-daemon 0.6.30 starting up.
eth0: Setting MAC to 00:12:f0:5f:d0:83
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge 0000:03:00.0: eth1: enabling interface
skge 0000:03:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control both
eth1: no IPv6 routers present
Messages.log:
Dec 7 13:49:27 localhost NetworkManager[2084]: <info> Auto-activating connection 'Ethernet (automatisch)'.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) starting connection 'Ethernet (automatisch)'
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Dec 7 13:49:28 localhost dhcpcd[2425]: version 5.2.12 starting
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> dhcpcd started with pid 2425
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Beginning IP6 addrconf.
Dec 7 13:49:28 localhost avahi-daemon[1992]: Withdrawing address record for fe80::211:d8ff:fed0:76eb on eth0.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Dec 7 13:49:28 localhost dhcpcd[2425]: eth0: rebinding lease of 192.168.1.57
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): DHCPv4 state changed nbi -> preinit
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): DHCPv4 state changed preinit -> fail
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Timeout) scheduled...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Timeout) started...
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Marking connection 'Ethernet (automatisch)' invalid.
Dec 7 13:49:28 localhost NetworkManager[2084]: <warn> Activation (eth0) failed.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Timeout) complete.
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): deactivating device (reason 'none') [0]
Dec 7 13:49:28 localhost dhcpcd[2425]: received SIGTERM, stopping
Dec 7 13:49:28 localhost dhcpcd[2425]: eth0: removing interface
Dec 7 13:49:28 localhost NetworkManager[2084]: <info> (eth0): canceled DHCP transaction, DHCP client pid 2425
Dec 7 13:49:28 localhost NetworkManager[2084]: <warn> (pid 2425) unhandled DHCP event for interface eth0
Does anybody know what goes wrong here?
Last edited by Thorsten Reinbold (2011-12-07 21:46:09)

First I would disable IPv6 and then see if you are able to connect to the network.
https://wiki.archlinux.org/index.php/IP … the_Module
Last edited by Mavirick (2011-12-07 23:33:00)

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange discrepancy with adjustment levels

Similar Messages

Maybe you are looking for