Strange: Domain-Directory deleted

Hi
I have a strange problem with my GroupWise domain agent.
When I start the domain, it deletes the whole domain directory and
recreates some default directories:
mslocal
mtaname
wpcs
wpcsin
wpcsout
wpgate
wpoffice
wptools
Everything else is deleted and lost.
The Agent runs on linux and I start it like this: gwmta -home
/dir/to/domain
I tried to start with a new domain directory with the dc-Files from the
GroupWise CD and I rebuilt the wpdomain.db in ConsoleOne, but no success.
Any idea?
Patric

I have the same problem, but the server is a supported platform, sles10sp4 with oes2sp3 + updates, GW7SP4.
The short story:
The server has been moved to a new identical hardware, because one of the disks in a raid1 array stopped working, and could not be replaced. So i migrated the server to a new hardware. I downed the server and with the help of two live CDs rsynced the system. I also changed the partitioning (to LVM) and filesystem type (reiser->ext3) After the migration, when i started the GW (domain only system with IDM), the domain directory got deleted. :(
I tried to rebuild the domain, i removed every gw rpm and reinstalled, but nothing helps. The domain is intact, i can open it with C1 and is valid.
What can i do? Reinstalling the whole server is not possible, it contains idm drivers, and is a replica server with over 250 replicas.
Any suggestions?
TIA,
Gellert

Similar Messages

Mail Exchange 2013 auto send some email to strange domain

My mail server is ok now. i can send and receive fast.
but some time it is auto send email to strange domain and continuous send to [email protected]
PLEASE HELP ME, thanks
Identity: Mail01\30101\25804163514390
Subject: Undeliverable: TODAY: Apple Macbook Pro for $23.38?
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 12
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 4/10/2014 8:08:02 PM
Expiration Time: 4/12/2014 8:08:02 PM
Last Error: 400 4.4.7 Message delayed
Queue ID: Mail01\30101
Recipients: [email protected];2;2;400 4.4.7 Message delayed;0;CN=Directly to Internet,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=elgaucho,DC=asia
AND
Identity: Mail01\158323\14873471746194
Subject: Delivery delayed:Inbound proxy probe
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 10
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 12/25/2013 4:48:12 PM
Expiration Time: 12/27/2013 4:48:12 PM
Last Error: 400 4.4.7 Message delayed
Queue ID: Mail01\158323
Recipients: [email protected];2;2;400 4.4.7 Message delayed;0;CN=Directly to Internet,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=elgaucho,DC=asia

Hello,
As the Vishwanath's provide the article, Exchange 2013 automatically creates several HealthMailbox<guid> objects in Active Directory which are used by Managed Availability to send e-mails through Exchange to verify mail flow every few minutes. These
e-mails are used to do health checks for resources from Frontend Transport role to Hub Transport and health checks on mailbox database resources.
Additional article for your reference.
http://exchangeserverpro.com/exchange-server-2013-inboundproxy-com-ndr/ (Note: Microsoft is providing this information as a convenience to you. The sites are not controlled
by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link)
Cara Chen
TechNet Community Support

Time Machine - strange behavior while deleting old backups

Not sure if this is the right place, because this is actually not on Time Capsule, but on a Time Machine on an external USB drive.
In any case, I searched the web for "time machine delete old backups" and found many discussions of various aspects of this task. My objective is to clean up a partition on a the external drive that I no longer use for active TM backups, but to retain a small set of backups in case I need to go back to them. The partition now has other uses and I need the space. My main TM backup is now on a separate Time Capsule.
So again my objective is not to remove all backups, but just most of them.
It appears that the well-discussed procedure is the following:
Go into Time Machine.
Select the Macintosh HD.
Go back to one of the oldest backups.
Click on the Gear > click Delete Backup.
This procedure will remove one Backup at a time, and it seems to take 5 - 10 minutes for each backup.
Here is what I noticed that was "strange":
You could delete a selected backup using the above procedure.
For the first selected backup so deleted, there is a confirmation dialog with a warning message that it is not undoable.
After clicking OK on the warning message, the display backs up to the "Present" backup, and the administrative password is requested.
After the administrative password is entered, the backup starts but control is passed back to the user interface, and another backup can be selected to be deleted.
However, after the second backup is selected and deleted, there is no warning dialog, and no request for the administrative password. At this point the user interface is busy and nothing more can be done until the backup delete is completed. Except that the Time Machine can be exited by first pressing Escape, then Cancel on the lower left of the screen.
If the time machine is exited, there is a Delete Backups progress dialog with a progress bar for each backup so far requested. If the second backup was requested, as in the steps above, there would be two backups.
I discovered by playing around that either you had to wait within Time Machine for the deletion to complete, or alternatively exit Time Machine. While I was not sure what was going on, I kept starting one backup, then exiting Time Machine and re-entering Time Machine and requesting another delete operation. Each time after entering Time Machine, the warning/admin password sequence occurred and I was able to exit. And then immediately re-enter Time Machine and request another backup. Only by exiting and re-entering could another delete request be made.
When out of Time Machine, I thus saw the Delete Backups dialog with any number of concurrent "Delete One Backup" progress bars.
Because of the nature of the hard links used to indicate backups, I was wondering if these multiple delete operations could possibly be hung in a deadly embrace, so I decided to only do one at a time. Some further study to see if the multiple delete operations were all able to complete would be needed to know if this would be a good way to "queue up" multiple delete requests.
Bottom line: seems like kind of an odd implementation. Would be really nice if you could select many (say 30) individual backups and delete them all at once, rather than taking 5 - 10 minutes each. Again, this is because I am trying to reclaim disk space, but not delete all the backups from a Time Machine backup set that is not in active use.
Also, the method of "queuing up" backup delete requests is kind of odd, but seems to work, with the proviso that I have not yet confirmed that doing more than one at a time actually works.

Heinz-G?uenter Arnold wrote:
since the upgrade to SL it seem that Time Machine has problems to completely remove old backups completely. The "removed" backups do not show up in Time Machine anymore, but the backup folders and part of their contents can still be seen in Finder.
Hi, and welcome to the forums.
That happens occasionally, in both Leopard and Snow Leopard, sometimes after something was deleted from the Finder, but also after an abnormal shutdown or improper disconnection of the TM disk.
Run a +*Repair Disk+* on it via Disk Utility, in your Applications/Utilities folder. If it finds errors, but can't fix them all, run it again (and again) until it either fixes them all, or can't fix any more.

Get the Domain Directory...

Hi
I am working with weblogic 8.1...my need is to get the current domain directory...there is...one process i am using is not working properly...
i.e using the method of weblogic.management.configuration.DomainMBean method getRootDirectory....which is returning..server starting directory...but not Domain directory....any one plz help me to get this....
raju

John,
OK. If you want to go the JMX route, have a look at the CurrentDirectory attribute of the ServerRuntime mbean. It would report your directory as this:
C:\bea\user_projects\domains\myDomain\.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Weblogic servers directory not getting created in the domain directory

Hi
I installed weblogic 12c(12.1.1.0) and then ran the config.sh to create the domain/managed servers directories.
After the config.sh completely ran I am not seeing the servers directory under the domain directory. All other directories like config, bin are present under the domains directory.
If anyone can let me know for weblogic-12c if they have come across such a issue during installation/configuration please reply to this thread.
Thanks
BharanB

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

Get Domain directory path in weblogic server 10gR3

Hi all,
Does anyone know how to get the directory path of to a domin in WLS 10gR3 using JMX?
Basically, I am trying to create a timer in WLI manually using Java code but for that to work, I
need to know the domain directory path as below.
BTW, I know it can be created in WLST with ease... but I want to try using Java code
import com.bea.wli.mbconnector.timer.TimerConnGenerator;
public class WLITimerTest {
public static void main(String args[]) {
String domainDir = <path of domain>; // e.g. C:\bea103\user_projects\domains\mydomain
String domainDir = "C:/bea103/user_projects/domains/esis_domain";
try {
TimerConnGenerator.main(new String[] {"-inName", "timerName", "-outfile",
domainDir +"/WLITimerEG_" + "timerName" + ".jar"});
} catch (Exception e) {
e.printStackTrace();
Thanks
Sam

Just to answer my own question. It's System.getenv('DOMAIN_HOME') where DOMAIN_HOME is set in setDomainEnv.cmd of your domain.

Domain directory path different than unc path??

GroupWise 8 new secondary on Linux
things "looked right, but couldn't connect
Checked "Display Object" in C-1 on the domain object and I see that the Domain directory path is wrong - it is not what the UNC path is.
Where do I change it?? or do I need to copy the files from the "real" domain directory to the wrong one and change the unc path?
This is a new empty secondary domain.
Also the "Display Object" listing shows Unsafe = 3
anything I need to worry about there?

Originally Posted by dzanre
kjhurni wrote:
> Only because if the GWIA is down, it'll alert nobody (haha) because well,
> the GWIA is down.
Oh - but you don't want to use your GWIA for alerts. Monitor has its own
SMTP mailer, so unless you HAVE to go through a relay host, monitor can
alert you regardless of whether the system is down. I send my alerts to the
smtp address of my phone.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
Moving GroupWise
Even better! Yes, we can send to the relay host and let it go wherever.
I was just thinking that let's say a regional POA/MTA is having problems, that the delivery address for the notification should be an " internal" GW account.
Obviously though, if the GWIA is having an issue we'd not know about it because it would try to deliver to the internal GW address and that has to go through the GWIA.
Although with diff. groups I will see if I can put the GWIA/MTA into a special group that gets notified to like the blackberry or something (like a text message).

Can we put config.xml outside of domain directory?

Hi,
          I am currently working on Admin server failover under weblogic 8.1 clustering.
          I want to put config.xml outside of domain directory, if hosted machine of admin server is unreacheable, I want to build the admin server from another box using the config.xml we kept aside of domain directory.
          Idea is, All configuration files (startWeblogic.sh, config.xml etc.,) want to keep another box, we use these configuration files from admin server hosted machine. Please let me know, whether this is feasible? if so, Please suggest me solution.
          Thanks,
          Murthy P.

yes, we can place config.xml outside of domain directory.
          We have to include in startup script as,
          -Dweblogic.RootDirectory=/u/murthy/examples/config/
          Thanks,
          Murthy P

I/O error while reading domain directory

I have created a server under admin server. Actually i was trying to integrate weblogic server with obiee.. as i am very new to weblogic i cudn't find the reason for the error.
while i am starting the server which i created i am getting this error
error details i will give below.. Thanks for any help and i will highly appreciate it.
Description: Starting OBIEE server ...
Status: FAILED
Begin Time: 5/12/11 10:14:36 AM IST
End Time: 5/12/11 10:14:37 AM IST
Exception: I/O error while reading domain directory
Thank you.

While starting node manager iam getting this error
SEVERE: Fatal error in node manager server
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:194)
at java.net.ServerSocket.<init>(ServerSocket.java:150)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:84)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unkn
own Source)
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:76)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)

Domain directory path for Monitor Agent on Linux?

If I'm installing Monitor (agent) on an OES2 Linux server, I am prompted for the path to a domain directory
But this server is not going to have any domains on it.
the docs are poor at best on this section (other than to follow the prompts)
I am assuming (since there's a "file browser" button) that if there's no domain on this server, that I cannot use a UNC path and must use a mount point to a server that has a domain?
And if the other server is on NSS, I will need ncpmount?

Originally Posted by dzanre
kjhurni wrote:
> Only because if the GWIA is down, it'll alert nobody (haha) because well,
> the GWIA is down.
Oh - but you don't want to use your GWIA for alerts. Monitor has its own
SMTP mailer, so unless you HAVE to go through a relay host, monitor can
alert you regardless of whether the system is down. I send my alerts to the
smtp address of my phone.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
Moving GroupWise
Even better! Yes, we can send to the relay host and let it go wherever.
I was just thinking that let's say a regional POA/MTA is having problems, that the delivery address for the notification should be an " internal" GW account.
Obviously though, if the GWIA is having an issue we'd not know about it because it would try to deliver to the internal GW address and that has to go through the GWIA.
Although with diff. groups I will see if I can put the GWIA/MTA into a special group that gets notified to like the blackberry or something (like a text message).

Domain name deletion within Business Catalyst

I am trying to add a domain name to a website created with Muse and hosted through Business Catalyst, but I am receiving this error meassage 'Domain already exists. Please delete all records associated with the domain before re-adding it'. Anbody know how to do this please? The domain I need to use was used in a previous website which had a single, monthly Business Catalyst hosting subscription, and I now need to add this domain name to the website I am hosting through the included sites provided with the Creative Cloud monthy subscription.

Move from the Creative Cloud to the Business Catalyst forum. They will be able to help you here.

Strange behavior in deleting images - works on second but not first try

In Library mode, Grid view, right after importing, after I select several images with an "x" to be deleted, when I bring up the "Delete Rejected Photos" dialog, I find this strange behavior. I get the message that there are not photos marked for deletion. I then invoke the dialog again, and my photos that were marked show up, with the choices of deleting from disk or removing from the catalog. What am I likely doing wrong? I'm on WinXP Pro with LR 2.2. Thanks!
Dilip

Dilip,
I too have seen this behaviour in all versions of LR. Even when deleting a single image in the develop module. If LR is writting the preview you can't delete the file until the preview is rendered. I think it's more to do with the OS not allowing the deletion of a file being accessed than a LR bug as such.
Gordon

Open Directory deleted objects

Hi,
I am familiar with performing ldap searches on Active Directory. I was wondering if the Open Directory has support for tombstone objects like AD or does it have other method to store the deleted objects which can be retrieved using an ldap search?

The article is still valid so you can refer to it and apply what is mentioned.
Of course, it is always recommend to try changes in a test environment before going to production.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Strange issue on deleting some rows on SYS.AUD$ table

I just found out this strange thing happened on my 10gR2 database. I created a user called AUDIT_LOG and GRANT DELETE, REFERENCES, SELECT ON SYS.AUD$ TO AUDIT_LOG when I logged on as SYS dba.
(1) Then I logged on as AUDIT_LOG user, tested the following statements:
SELECT count(*) from sys.aud$ where ntimestamp# < TRUNC (SYSDATE-14);
COUNT(*)
2
DELETE from sys.aud$ where ntimestamp# < TRUNC(SYSDATE-14);
0 rows deleted
(2) When I logged on as SYS account, SYS deleted them all,
DELETE from sys.aud$ where ntimestamp# < TRUNC(SYSDATE-14);
2 rows deleted
I don't understand why the AUDIT_LOG user can't delete that two rows?
Thanks for your help!
lixidon

Apologies for misreading the first time. I am wondering if the rows in question were related to audit actions on sys.aud$ itself as those rows should not be deleted by the AUDIT_LOG user (even if the user has been granted delete).
Here's an excerpt from the Security Guide under the "Protecting the Standard Audit Trail" section:
Audit records generated as a result of object audit options set for the SYS.AUD$ table can only be deleted from the audit trail by someone connected with administrator privileges, which itself has protection against unauthorized use.
Here's a quick example illustrating this:
SQL> connect / as sysdba
Connected.
SQL> grant delete, references, select on sys.aud$ to scott;
Grant succeeded.
SQL> connect scott/tiger
Connected.
SQL> select count(*) from sys.aud$ where sessionid = 30002;
COUNT(*)
2
1 row selected.
SQL> delete from sys.aud$ where sessionid = 30002;
2 rows deleted.
SQL> commit;
-- now try to delete the sys.aud$ rows related to the above delete
-- this will not succeed as user scott even though delete has been granted
-- the session that performed the delete is 422426
SQL> select count(*) from sys.aud$ where obj$name = 'AUD$' and action# = 7 and sessionid = 422426;
COUNT(*)
2
1 row selected.
SQL> delete from sys.aud$ where obj$name = 'AUD$' and action# = 7 and sessionid = 422426;
0 rows deleted.
SQL>Regards,
Mark

Strange behavior when deleting text in an email.

When composing emails I have noticed that if I make a mistake and delete some text it behaves strangely. This only happens if the text deleted is at the end of the message. On deleting the text I am then left with a small highlighted area (like when you have used your cursor to select an area). If I then try to continue typing it types a few letters and then stops and the new letters typed just go over and over in the same cursor spot. This is difficult to describe so i hope I have made sense but it is extremely frustrating and I was wondering if anyone else was having the same problem of if it is a known bug??? If anyone knows, please could they let me know :-)
Thanks
P.S. I'm on an iMac using 10.7.3

Thanks for the info sanjapet.
1) I just trashed the Preferences
com.apple.mail.plist
com.apple.mail.plist.lockfile
2) then reboot. It is still misbehaving in texts in Apple Mail. For example i select a whole paragraph but only some words are highlighted. Here is a sample
http://www.pixentral.com/show.php?pi...rYnikzXiYS5Ir0
very annoying indeed.
3) Now i go to Preferences and
com.apple.mail.plist
com.apple.mail.plist.lockfile
are not there any more. I thought Apple Mail will restored them automatically. Isn't that right?
Best,

Strange: Domain-Directory deleted

Similar Messages

Maybe you are looking for