Strange dots in Phantom "packed" .cine-files with Mac OSX 10.9
Hi there
I have problem with my Miro .cine-files. After upgrading my operating system to MAC OSX 10.9 (Maverick) I found strange dots on the right side of the frame in my footage shot with the Phantom Miro 320LC.
I first thought it might be a bad pixel on the camera but then checked older footage of the same camera that was already edited and working perfectly fine. Even those .cine-files now have those dots in Premiere CC, Speedgrade & Davinci Resolve 10 Lite (FreeVersion). I also own the GlueTools Plugin for the .cine codec and if I load the files into AfterEffects the dots are NOT there.
Screenshot Premiere CC - top right & bottom right of the frame
Screenshot AfterEffects w/ GlueTools Plugin
Another work-around is to load the .cine-files in the PCC-Software and safe them as "unpacked" .cine-files. The dots are gone in all programs mentioned above. The only program that interprets the footage correctly is Davinci - all other programs show the file approx. 2 stops darker and have the same overall green tint to it.
Have you encountered the same problems? Did you find a solution beside downgrading OSX to something like 10.6.?
As a reference I uploaded 3 files into my dropbox:
https://www.dropbox.com/sh/aukk8hj8xjhkp1r/AACd5LwaanRKj4xhF1SHPrSla
1. file: c_15153_187_ORG.cine --> original .cine file from Miro
2. file: miro_test_unpacked.cine --> original .cine file converted with PCC-Software and safed "unpacked"
3. flie: miro_test_packed.cine --> original .cine file converted with PCC-Software and safed "packed"
I'm working as a Highspeed-Operator, the post is normally done somewhere else and the systems vary from MAC to PC with Adobe, Avid or ...
Any suggestions would be appreciated.
Kind regards
torsten
Is anybody from Adobe monitoring this issue? I'm having the same problems with Premiere and .CINE files. Previewing them looks fine (no longer having the darker issue) but when I render, it becomes green and pixelated.
Similar Messages
-
How to delete pages in a pdf file with mac OSX Mavericks?
Indeed i don't have Pages options in my tools window... Is that normal for the mac version? Please it's urgent...
Sorry, it was my fault. When I searched on the Internet, I was reading the Acrobat help pages, without knowing it, because in my research I wrote "how to delete pages in a pdf file with Adobe reader", i was just automatically redirected toward Acrobat help but i didn't notice.
So no incorrect information exist in the Reader Help pages. -
Trouble viewing my Phantom 4K cine files in Premiere
I am having trouble viewing my Phantom 4K cine files in Premiere. Playback is quite good, but the picture is abnormally dark. I have seen in other forums that I am not the only one to have this issue. Is there a fix?
Thank you.Hi EatsMungotictus,
We support the format, but for now you will have to apply a LUT (via Effects > Color Correction > Lumetri) to obtain correct image. We'll work on improving the picture moving forward.
Sorry for any inconvenience.
Thanks,
Kevin -
I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
Problem opening files with Mac OS Mavericks and Elements
I have recently installed Mac OS 10.9.x Mavericks. Since this I have had problems opening files in Elements 11. I upgraded to Elements 12, blindly hoping the problem would fix itself, however it hasn't. When I try to open a file the Finder window pops up then disappears immediately. Occasionally it will stay open until I scroll down but then closes. I keep the files on an external drive but the drive is working with all other applications, so I don't think it is that. If anyone has had a similar problem and has any ideas I would be grateful as the program is unusable for now. Thanks very much in anticipation
Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
Re: Problem opening files with Mac OS Mavericks and Elements
created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations. -
Facetime is supposed to come with Mac OSX 10.9.1 right? It suddenlt requires me to sign in with Apple ID. So I did and it still won't open. The worst part is that it doesn't even recognize my Apple ID no matter how many times I try fill it out again and again. I've seen this happen when I first bought the Imac last year, it was fixed by replacing the host file (with some help from the community here). I did the same thing again, it didn't work.
Any idea please?It's fixed by changing the account name (Apple ID) and password
-
where is button to accept end user agreement so I can download or read online file. mac osx reader XI
every time i click on a file to downloac
i get a reader message Before viewing PDF ... you must launch adobe reader and then accept the End User License Agreement. Ive searched every part of the menu for this and cant fine itOk, so the Reader app works. Fine, but why did you say ",the reader won't open any more", that led us a confusing direction.
Ok, the problem is most likely caused because you downloaded Acrobat Pro, which takes over from Reader, then got rid of it. You now have part of Acrobat in Safari, not part of Adobe Reader.
There are two things to try to fix this. The first and easiest is to download and install Adobe Reader again. That should puts its stuff back in Safari with a bit of luck.
Important note for others following this thread. Downloading Adobe Reader is not going to help you if you have not understood and followed the instructions to "launch" Adobe Reader (or Adobe Acrobat). Make sure you understand what "launch" means before downloading anything again. -
I can't download linked files on mac osx lion what do i do?
i can't download linked files on mac osx lion what do i do?
There have been some reported problems with Apple's servers.
Try this.
Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
I assume you are trying to update via wifi. You can also connect the iPad to your computer and update using iTunes.
Cheers, Tom -
Hello out there...
Right now I'm trying to add subtitles to some movies that I have downloaded. Unfortunately, all of the subtitle files are .smi and for some reason the disk mounting image fails after downloading and the files are worthless. I can't get them to open in Quicktime, Real Player, or the DIVX player.
Could anyone please lead me in the right direction here? Is there someting I should know about downloading and opening .smi files in Mac OSX? Is it different than for Windows perhaps...Hi soxcoverfeet,
first of all: WELCOME TO THE DISCUSSIONS!
The .smi extension is an indicator for a Self-Mounting-Image from OS 9. As a first step try to open it with disk utility. For that just drag the smi-file over the disk utility icon.
If it did not work, try this: click the .smi-file and type Apple-i to get the information window. There you should see a checkbox that allows you to define it as Classic-file. Check it so that the file will be opened in Classic and there it should expand correctly. In case you deleted Classic you will have to reinstall it.
These articles might help:
Mac OS: What is a .smi File
Mac OS X: Using Disk Copy disk image files (Disk Copy is now integrated into Disk Utility)
Mac OS 9.1 and Software Updates: .smi Disk Image Volumes Appear Empty
Common error messages when downloading files
If this answered your question please consider granting some stars: Why reward points? -
Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver. -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
Using a network-stored catalog with Mac OSX
Greetings all.
I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
Is this true. or has someone found a workaround to the problem?
Thanks!
--JohnThanks, for that ( I assume we have to carry on in English due to forum policy even though we are both of German tongue I assume)
You mean the access problems are part of the "no network drive" thing? I suspected that. Took me a whole day in front of my computer to realign the mess. So should one better not use the network drives at all? Quite a pity in times where everybody seems to use network storage.
No, I did not use organizer to use the photos. So there is no way to reconnect them? Should I delete the catalogue and start with the photos from scratch?
Regards
Andibuch
Am 02.01.2013 um 23:35 schrieb Barbara B.:
Re: Using a network-stored catalog with Mac OSX
created by Barbara B. in Photoshop Elements - View the full discussion
Well, yes, these are part of the "no network drive" thing.
As for moving the photos, did you use organizer to move them? You will always have trouble if you move photos outside of organizer, even on the same drive--you have to let it manage your photos or it doesn't have a clue as to what happened.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963270#4963270
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963270#4963270
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963270#4963270. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Itunes is not compatible with mac osx 10.5.8
latest itunes not compatible with mac osx 10.5.8. How do I resolve this?
You need Snow Leopard at least.
MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store.
Maybe you are looking for
-
I cannot open or print pdf. files with Adobe on my windows 8
I have downloaded Adobe Acrobat but can only read files not print them - even when I save them.
-
Has anyone in the UK tried this CPU upgrade from Daystar? http://daystar-store.com/index.asp?PageAction=VIEWPROD&ProdID=555 I am unsure about, due to the shipping, and I was worried it would cost me much more. At the current exchange rate, the 1.83gh
-
Is there a problem using Acrobat Reader plugin Find with Mac OS X v10.7 Lion?
I've recently noticed that the Find function is not working when I am viewing a pdf with Safari 6.1.1 and OS 10.7.5. I get a "Not Found" result no matter what I enter, even when I'm sure the search phrase is in the pdf. Is there a preference in Safar
-
Print Capture Signature in Smartforms
Hi experts, I would like to know if it is possible to print a captured signature from a mobile device into my smartforms. The customer will sign through a device and the output for the invoice will be printed with the signature. I believe another SAP
-
I'm trying to export photos to usb and keep getting this message, "There is not enough disk space to complete that operation". The usb is almost completely empty. Is the problem with the library?