Strange effects in using f:convertNumber and h:inputText

Hi everybody,
I'm having really strange results with the following <h:inputText> and <f:convertNumber> tags in one JSF page:
<h:inputText id="total" value="#{myBean.total}" required="true" size="10" ><f:convertNumber minFractionDigits="2" maxFractionDigits="2"/></h:inputText>
When I enter the value 1585,9 for example, it is converted to 1 585,90 when I click on some link on the same page. And this is OK, since I'm using French locale. But when I click on the same link or something else, the value is changed to 1,00 !!! The other strange thing is that if I show the same value in a <h:outputText> tag, the value is always OK, that is I always have 1 585,90.
Does anyone has any idea, and tell me how to solve this weird problem?
Thanks
Billy

I found out after playing for a good time with different tests. The problem is that JSF uses NumberFormat to parse input string, and characters following an invalid character( space in my case ) are ignored! That's why I got just 1,00.
So,the solution is to write a converter to handle this as follows:
1. In method getAsString(): format the string according to the locale selected.
2. In getAsObject(): remove any space in the input parameter, and return the appropriate value.

Similar Messages

Strange Effects When Using Erase & Clone Tools In CS4

I recently upgraded from Elements 8 to CS4 and I've noticed that I have started getting strange effects with both the erase and clone tools. When I have been working with either of these tools for a while I suddenly find that left clicking the mous will cause a spurious reaction in another part of my image. The erase tool erases strips and the clone tool clones other colours and areas. I suspect that it might be due to the amount of memory I'm using but advice would be appreciated. I am running Windows 7 and I have 4.00GB of physical memory and 11.8GB of virtual memory.
Looking forward to suggestions.
Ward1941UK

I've found the solution to the problem, although it doesn't really please me because I've had to sacrifice the number of history states I can keep. I have reduced the number to 15 from 20 and the problem has gone away, which indicates that it's a memory problem. I'm going to slowly increase the number of states until the problem re-appears.
Ward1941uk

What are the general effects of using recovery mode, and is it possible for one's data to be backed up on to it afterwards?

My iPad, in my opinion is a great device to have whenever I need to use it for work - mainly using it for creating music. However I feel that it's a bit outdated, and I plan to get a new iPad Air for this holiday season and give this one to my children. That being said, I have stumbled across a weird problem that keeps me from backing my iPad (generation 2) up to my computer. The error in question states that "The iPad is currently owned by another computer." By looking around on the internet, I was able to deduce that one of the ways to solve this problem was to put it in recovery mode to get rid of the 'ownership', and this seems logistical. The problem I'm facing now, is that, after trying to find the answer, I do not know how recovery mode has an impact on all the data stored on my iPad. To clarify the question into three parts:
1) Is there a way to back up files from my iPad and easily retrieve them without the use of iTunes?
2) If not, is there a way to get rid of the 'ownership' of another computer other than recovery mode WITHOUT jailbreaking it?
3) If still no, then what are the effects of putting my iPad into recovery mode, and will all of my songs and data be safe?
Thank you for answering, if possible.

Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it

Do not use the Megaphone effect when using external amp and speakers

Hi guys,
I just wanted to let you know that I damaged my Yamaha NS10 speakers while I was testing the effect section on garageband with an external mic through my studio amp and the NS10 studio monitors. When I switched to the Megaphone effect to test it I received such a high frequency signal that it killed my NS10 tweeters. It is very frustrating and I had never really any issues in the past with my monitors.
I am just posting this topic here to warn you guys, just in case you are trying the same thing. It cost me 250 dollar to replace the tweeters so you better test the effect section of garageband on a very low level or even use your old headphones before you plug your mac to an external amp and speaker set up.
Good luck,
Martin

Sorry to hear about those blown tweeters.
If it'll help, once you establish a microphone setup using the dropdowns in the lower right-hand corner of the browse window, there are three monitor options: Off, On, & On (no feedback protection).
Knowing this, the latter may have been the unbeknownst destructive culprit.

Strange behavior when searching a phrase using reg exp and dynamic sql

Hi,
I have a strange issue while using dynamic sql for an apex page. I have a requirement to search a string in the database column which is entered by user on a page item. The search process should search the whole phrase only.
I have a query generated dynamically in the back end and use it in a cursor in the stored procedure
SELECT t.group_cn , t.group_desc, t.group_type, t.partner_organization_id, t.partner_organization
FROM vr_idm_group t WHERE regexp_like(t.group_desc,'(^|\W)HR Selection & Assignment(\W|$)', 'i')The pl sql code with the dynamic sql statements are below.
   IF p_search_process NOT in ('PARTNER') THEN
      OPEN v_cursor FOR v_sql;
   ELSE
      OPEN v_cursor FOR v_sql USING p_search_id;
   END IF;
   LOOP
      FETCH v_cursor INTo v_obj.group_cn, v_obj.group_desc, v_obj.group_type, v_obj.partner_organization_id,
         v_obj.partner_organization, v_obj.match_count;
      EXIT WHEN v_cursor%NOTFOUND ;
      v_search_array.extend;
      v_search_array(v_search_array.last) := v_obj;
      dbms_output.put_line(v_sql);
   END LOOP;The search works fine if the search string does not contain any special character like &,- etc.
However, if the search string contains any special character, it does not return any thing. This strange issue happens only if I call the procedure from the apex page and the search string contains a special character. (please note that the procedure works fine even from apex if the string does not have a special character). When I debugged this, found that, the cursor does not fetch any rows (it is supposed to fetch two rows) for unknown reason. When I run the query separately, it returns the two rows (in which the column group_desc contains the search string "HR Selection & Assignment") as desired. Also, when I test the procedure in the back end (PLSQL developer), it works fine.
Any idea, what is causing this strange behaviour?
Advance thanks.
Regards,
Natarajan

i don't see anything about a dataProvider. you're assigning a source for a scrollpane. scrollpane's don't have a dataProvider property.
anyway, other than arrayRun always being false when that last if-statement executes, what's the problem? doesn't that movieclip display when that 2nd branch of the last if-statement executes (assuming instance is defined correctly etc)?

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the Actions box up, it is only showing a small list of effects to use. And no side bar to go any further. When I click on the little arrow at top and then click on "load actions"

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?

To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

I am trying to use the Filter-Render-Lighting Effects tool but the Lighting Effects is in light grey and I can not access it can anyone hel please

I am trying to use the Filter-Render-Lighting Effects tool but the Lighting Effects is in light grey and I can not access it can anyone help please?

Hi again is this what you are looking for?
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00)
x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE
Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 1796 MHz
Built-in memory: 3977 MB
Free memory: 1203 MB
Memory available to Photoshop: 3289 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Disabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2052
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Intel(R) HD Graphics 4000"
gpu[0].RendererID=358
gpu[0].Vendor="Intel"
gpu[0].VendorID=32902
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="10.18.10.3379"
gpu[0].Driver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10 iumd32"
gpu[0].DriverDate="20131218000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 "
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 10.18.10.3379"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[96]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Subscription
Serial number: 96040664679779475738
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Trisha\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 452.3G, 51.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64
Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64
Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/10/29-11:47:16   79.548223   79.548223
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/10/25-12:15:59   5.0.24   79.547804
   AdobePDFL.dll   PDFL 2013/10/29-11:47:16   79.508720   79.508720
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/10/29-11:47:16   79.154911   79.154911
   AdobeXMPFiles.dll   Adobe XMP Files 2013/10/29-11:47:16   79.154911
79.154911
   AdobeXMPScript.dll   Adobe XMP Script 2013/10/29-11:47:16   79.154911
79.154911
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/10/29-11:47:16   79.548223   79.548223
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.249 BuildVersion: 7.0; BuildDate:
Thu Nov 14 2013 15:55:50)   1.000000
   ARE.dll   ARE 2013/10/29-11:47:16   79.548223   79.548223
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830
66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/10/29-11:47:16   79.548223   79.548223
   BIBUtils.dll   BIBUtils 2013/10/29-11:47:16   79.548223   79.548223
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/10/29-11:47:16   79.548223   79.548223
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/10/30-13:12:12   79.546835
79.546835
   FileInfo.dll   Adobe XMP FileInfo 2013/10/25-03:51:33   79.154511
79.154511
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode
2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode
2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.145
   JP2KLib.dll   JP2KLib 2013/10/29-11:47:16   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r)
Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/10/29-11:47:16   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   PatchMatch.dll   PatchMatch 2013/10/29-11:47:16   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)
4.2.0.36
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/10/30-13:12:12   79.546835   79.546835
   ScriptUIFlex.dll   ScriptUIFlex 2013/10/30-13:12:12   79.546835
79.546835
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r)
Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012,
1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1,
2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library
7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078
0.19078
Required plug-ins:
   3D Studio 14.2.1 (14.2.1 x001)
   Accented Edges 14.2.1
   Adaptive Wide Angle 14.2.1
   Angled Strokes 14.2.1
   Average 14.2.1 (14.2.1 x001)
   Bas Relief 14.2.1
   BMP 14.2.1
   Camera Raw 8.4.1
   Camera Raw Filter 8.4.1
   Chalk & Charcoal 14.2.1
   Charcoal 14.2.1
   Chrome 14.2.1
   Cineon 14.2.1 (14.2.1 x001)
   Clouds 14.2.1 (14.2.1 x001)
   Collada 14.2.1 (14.2.1 x001)
   Color Halftone 14.2.1
   Colored Pencil 14.2.1
   CompuServe GIF 14.2.1
   Conté Crayon 14.2.1
   Craquelure 14.2.1
   Crop and Straighten Photos 14.2.1 (14.2.1 x001)
   Crop and Straighten Photos Filter 14.2.1
   Crosshatch 14.2.1
   Crystallize 14.2.1
   Cutout 14.2.1
   Dark Strokes 14.2.1
   De-Interlace 14.2.1
   Dicom 14.2.1
   Difference Clouds 14.2.1 (14.2.1 x001)
   Diffuse Glow 14.2.1
   Displace 14.2.1
   Dry Brush 14.2.1
   Eazel Acquire 14.2.1 (14.2.1 x001)
   Embed Watermark 4.0
   Entropy 14.2.1 (14.2.1 x001)
   Extrude 14.2.1
   FastCore Routines 14.2.1 (14.2.1 x001)
   Fibers 14.2.1
   Film Grain 14.2.1
   Filter Gallery 14.2.1
   Flash 3D 14.2.1 (14.2.1 x001)
   Fresco 14.2.1
   Glass 14.2.1
   Glowing Edges 14.2.1
   Google Earth 4 14.2.1 (14.2.1 x001)
   Grain 14.2.1
   Graphic Pen 14.2.1
   Halftone Pattern 14.2.1
   HDRMergeUI 14.2.1
   IFF Format 14.2.1
   Ink Outlines 14.2.1
   JPEG 2000 14.2.1
   Kurtosis 14.2.1 (14.2.1 x001)
   Lens Blur 14.2.1
   Lens Correction 14.2.1
   Lens Flare 14.2.1
   Liquify 14.2.1
   Matlab Operation 14.2.1 (14.2.1 x001)
   Maximum 14.2.1 (14.2.1 x001)
   Mean 14.2.1 (14.2.1 x001)
   Measurement Core 14.2.1 (14.2.1 x001)
   Median 14.2.1 (14.2.1 x001)
   Mezzotint 14.2.1
   Minimum 14.2.1 (14.2.1 x001)
   MMXCore Routines 14.2.1 (14.2.1 x001)
   Mosaic Tiles 14.2.1
   Multiprocessor Support 14.2.1 (14.2.1 x001)
   Neon Glow 14.2.1
   Note Paper 14.2.1
   NTSC Colors 14.2.1 (14.2.1 x001)
   Ocean Ripple 14.2.1
   Oil Paint 14.2.1
   OpenEXR 14.2.1
   Paint Daubs 14.2.1
   Palette Knife 14.2.1
   Patchwork 14.2.1
   Paths to Illustrator 14.2.1
   PCX 14.2.1 (14.2.1 x001)
   Photocopy 14.2.1
   Photoshop 3D Engine 14.2.1 (14.2.1 x001)
   Photoshop Touch 14.0
   Picture Package Filter 14.2.1 (14.2.1 x001)
   Pinch 14.2.1
   Pixar 14.2.1 (14.2.1 x001)
   Plaster 14.2.1
   Plastic Wrap 14.2.1
   PNG 14.2.1
   Pointillize 14.2.1
   Polar Coordinates 14.2.1
   Portable Bit Map 14.2.1 (14.2.1 x001)
   Poster Edges 14.2.1
   Radial Blur 14.2.1
   Radiance 14.2.1 (14.2.1 x001)
   Range 14.2.1 (14.2.1 x001)
   Read Watermark 4.0
   Reticulation 14.2.1
   Ripple 14.2.1
   Rough Pastels 14.2.1
   Save for Web 14.2.1
   ScriptingSupport 14.2.1
   Shake Reduction 14.2.1
   Shear 14.2.1
   Skewness 14.2.1 (14.2.1 x001)
   Smart Blur 14.2.1
   Smudge Stick 14.2.1
   Solarize 14.2.1 (14.2.1 x001)
   Spatter 14.2.1
   Spherize 14.2.1
   Sponge 14.2.1
   Sprayed Strokes 14.2.1
   Stained Glass 14.2.1
   Stamp 14.2.1
   Standard Deviation 14.2.1 (14.2.1 x001)
   STL 14.2.1 (14.2.1 x001)
   Sumi-e 14.2.1
   Summation 14.2.1 (14.2.1 x001)
   Targa 14.2.1
   Texturizer 14.2.1
   Tiles 14.2.1
   Torn Edges 14.2.1
   Twirl 14.2.1
   Underpainting 14.2.1
   Vanishing Point 14.2.1
   Variance 14.2.1 (14.2.1 x001)
   Variations 14.2.1 (14.2.1 x001)
   Water Paper 14.2.1
   Watercolor 14.2.1
   Wave 14.2.1
   Wavefront|OBJ 14.2.1 (14.2.1 x001)
   WIA Support 14.2.1 (14.2.1 x001)
   Wind 14.2.1
   Wireless Bitmap 14.2.1 (14.2.1 x001)
   ZigZag 14.2.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
   Adobe Exchange
Installed TWAIN devices: NONE
On Tue, Feb 24, 2015 at 10:29 PM, Benjamin Root Photography <

Ai, 3D effect - after using to either extrude or revolve the settings are retained in my drawing tools - pen, pencil and shapes. Example I draw a 50 pt extruded object in wireframe, isometric view and my pen and all drawing tools will only draw using thos

Ai, 3D effect - after using to either extrude or revolve the settings are retained in my drawing tools - pen, pencil and shapes. Example I draw a 50 pt extruded object in wireframe, isometric view and my pen and all drawing tools will only draw using those settings. I can not exit, help please!

Appearance panel menu > New art has basic appearance.

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

Negative effects by using DBMS_REDEFINITION package

Hello everybody,
I am looking for all 'bad' side effects of using the package.
I am in project where the definition of tables changes.
Sometimes a column needs to be placed in the middle of the table.
Up to now there are scripts which doing a lot of drops of columns, updates, add adds again.
My idea was to use the package, which I could test successfully.
Now I learned, that the grants to the table are lost.
What else should be concerned by using the package?
Thanks

Hi,
Sometimes a column needs to be placed in the middle of the table.hmm and why do you need some redefinition/reorg for the table - just put the columns on the right place in the select statement?
Now I learned, that the grants to the table are lost.hmm not "really"... have a look at the procedure "COPY_TABLE_DEPENDENTS".
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_redefi.htm#sthref5656
-> This subprogram is used to clone the dependent objects like grants, triggers, constraints and privileges from the table being redefined to the interim table (which represents the post-redefinition table).
Side effects:
You need to create/rebuild the indexes.. because of the rowids change.
Btw. your scenario seems a little bit "strange" to me...
Regards
Stefan

Strange effects in using f:convertNumber and h:inputText

Similar Messages

Maybe you are looking for