Strange error in mapping test: Structure with min!=max without mapping

Hi,
a very simple mapping: flatfile 2 Idoc.
in mapping test I'm trying to test it. but I get always a strange error warning:
11:25:12 Teststart Mapping-Objekt MM_XXXXX2WGSREQ is not completely designed. The execution is impossible.
Structure with min!=max without mapping
11:25:12 Testende
What for a problem?
Thanks for any hints!
Regards
Rene

Hi Rene,
Check the mapping of 1:n occurence and 0:n occurence nodes.
you can find the node in yellow color in the map level.
Regards,
Harish

Similar Messages

Error in messege mapping " Structure with min!=max without mapping"

Hi Experts,
got an error in messege mapping, after mapping was done as " Structure with min!=max without mapping" . Any idea what is my mistake!
Points will be rewarded.
Thanks and Regards,
Arnab.

Hi Mohd,
This error pops up when your mapping is incomplete...
First check all the fields are mapped....
and check all the required fields are mapped which are in RED in colour...if not map to the specific field or to a constant or disable that one...and check the type of the sourse and target fields.....is it string,floatetc
you got a element, which occurences (=minOccurs & maxOccurs) are unequal.
Those fields have to be mapped.
http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm
Reward points if this helps
Regards
Pragathi.

Structure with min!=max without mapping

Hi,
At Message Mapping - Test Tab, we have the following error:
"Mapping object incomplete. Unable to continue execution
Structure with min!=max without mapping"
We did added some custom segments to the standard idoc, but we already validate the xml structure and it seems valid.
Do you guys know what it means?
Thanks in advance,
Luí

Hi,
If you don't map a mandatory target field, red bulb is shown in graphical mapping.Altough it saves "successfully", it fails while testing using the Test Tool and throws an error mapping incomplete Unable to continue execution. So try debugging for the unmapped target field .
BR.Venkat

Mapping Error : structure min!=max without mapping

When trying to test my map, I am recieving the error:
structure min!=max without mapping
It seems to me that thsi would normally be caused by a particular field that has a minimum occurance of 1, and is not being populated. However, I have double checked to make sure all of the fields that must be populated are in fact getting populated.
Are there any other causes for this error?

I am obviously missing something, but having difficulty spotting it. I assume I must be forgetting a field somewhere. I am mapping to a Matmas05 IDoc. The only fields / segments that XI requests be populated are:
E1MARAM (segment, plus several fields)
E1MAKTM (segment)
F7 says the mapping is not sufficiently defined, so obviously I have left something out. When the E1MARAM structure is open all fields inside it are green, however when I close it, it becomes red. But there are not any red fields inside it. How do I find the field that it is requesting be populated?

After updating waterfox 12.0 to 15.0, but while launching from task bar its giving error not compatable version 15.0 min/max version 12.0

after updating waterfox 12.0 to 15.0, and i opend the app and pin it to the task bar (windows 7 64bit enterprise edition) but while launching from task bar its giving error not compatable version 15.0 min version 12.0 ,max version 12.0

Such an error is caused by some files that weren't updated successfully, so you are left with a mixture of files from different Firefox versions.<br />
There is usually some security software involved that protects .ini files against modification (update).
You will still have to do a clean reinstall and delete the Firefox program folder before reinstalling a new copy of Firefox.
*C:\Program Files (x86)\Mozilla Firefox\

Need help with min max sql

hi all, forgot i had a user name and password and haven't needed help for quite a bit since i didn't do sql for a while but now i'm back at reporting again...
Here is a sample table as i remember it:
Item     Date     Time     Time Frame     Duration     Duration Frame
A     20100926     0     5     500     10
A     20100926     600     10     500     30
A     20100926     1500     12     100     30
B     20100926     1800     28     200     40
B     20100926     2200     6     150     70
B     20100926     2600     15     600     60
B     20100926     3600     30     200     70
Results Set (expected):
Item     Date     Time     Total Duration
A     20100926     0     1600:20     --basically max (time+duration) - min(time+duration)
B     20100926     1800     2000:00
Sorry, but. I didnt put my sql statement as I wasn't planning on posting and left it at work, but, i've been looking on internet and people say to use min/max function and i've attenpted it with it works with just this table (without grouping). But as soon as i group it the values seem to mess up.
Last i remembered it gave me:
Item     Date     Time     Total Duration
A     20100926     0     1600:30     --basically max(time+duration) - min(time+duration)
B     20100926     1800     2000:70
I think it's looking at max duration which is 30&70 and hence it retrurns those values in the result set. Is it because of the max function hence it's returning this value? any help is appreciated. thanks
Edited by: stanleyho on Sep 30, 2010 4:44 PM

Okay, here we go again, repost, hopefully okay this time:
Hi Madhu, okay, just got to work: I am using TOAD and working in Oracle 10g. Here is my table structure and the query i use to try and get what I am looking for:
There is one extra table but that is only used to link these two tables listed below so i didn't bother posting it.
TABLE: TX_RECON_INSTANCE_VIEW
ColumnName ColID DataType Null
CHANNEL_CODE 3 VARCHAR2 (4 Char) N
DURATION 8 NUMBER (10) N
DURATION_FRAME 9 NUMBER (2) N
REAL_TIME 6 NUMBER (10) N
REAL_TIME_FRAME 7 NUMBER (2) N
ITEM_ID 4 NUMBER Y
TX_DATE 2 CHAR (8 Byte) N
TX_ID 1 NUMBER (9) N
TX_TYPE 13 VARCHAR2 (4 Char) N
TABLE: TX_SCHEDULE
ColumnName ColID PK Null DataType
TX_TYPE 22 N VARCHAR2 (4 Char)
TX_ID 1 1 N NUMBER (9)
TX_DATE 2 N CHAR (8 Byte)
SCHEDULE_TIME_FRAME 9 N NUMBER (2)
SCHEDULE_TIME 8 N NUMBER (10)
REAL_TIME 10 N NUMBER (10)
DURATION_FRAME 13 N NUMBER (2)
DURATION 12 N NUMBER (10)________________________________________
And the data and results:
TX_ID TX_DATE REAL_TIME REAL_TIME_FRAME DURATION DURATION_FRAME ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION SCHEDULE_TIME SCHEDULE_TIME_FRAME DURATION_1 DURATION_FRAME_1
1651000 20100710 0 0 545 20 1234 00:00:00:00 00:09:05:20 00:00:00:00 00:09:05:20 0 0 545 20
1752223 20100710 667 12 281 7 1234 00:11:07:12 00:04:41:07 00:11:07:10 00:04:41:07 667 10 281 7
1846501 20100710 1071 13 335 9 1234 00:17:51:13 00:05:35:09 00:17:50:09 00:05:35:09 1070 9 335 9
2001102 20100710 1525 6 249 14 1234 00:25:25:06 00:04:09:14 00:25:22:08 00:04:09:14 1522 8 249 14
3246669 20100710 1800 0 586 2 1235 00:30:00:00 00:09:46:02 00:30:00:00 00:09:46:02 1800 0 586 2
4456822 20100710 2492 16 276 5 1235 00:41:32:16 00:04:36:05 00:41:32:16 00:04:36:05 2492 16 276 5
1253168 20100710 2890 15 222 17 1235 00:48:10:15 00:03:42:17 00:48:10:15 00:03:42:17 2890 15 222 17
1112456 20100710 3277 18 297 0 1235 00:54:37:18 00:04:57:00 00:54:35:10 00:04:57:00 3275 10 297 0
Grouped results set:
TX_DATE ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION
20100710 1234 00:00:00:00 00:29:34:20 00:00:00:00 00:29:31:20
20100710 1235 00:30:00:00 00:29:34:17 00:30:00:00 00:29:32:17
--> SCHEDULED DURATION "00:29:31:20" is not correct as it should be (00:25:22:08+00:04:09:14)-(00:00:00:00)=00:29:31:22
--> see expected results below
Expected results:
TX_DATE ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION
20100710 1234 00:00:00:00 00:29:34:20 00:00:00:00 00:29:31:22
20100710 1235 00:30:00:00 00:29:34:18 00:30:00:00 00:29:34:10________________________________________
And the query I am using:
SELECT --TXR.TX_ID,
TXR.TX_DATE, TXR.ITEM_ID,
TO_CHAR(TRUNC((MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) )/3600),'FM00')||':'||TO_CHAR(TRUNC(MOD(MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,3600)/60),'FM00')||':'||TO_CHAR(MOD(MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00')||':'||TO_CHAR(MOD(MIN(TXR.REAL_TIME_FRAME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00') "AS RUN TIME",
to_char(trunc((MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME))/3600),'FM00')||':'||to_char(trunc(mod(MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME),3600)/60),'FM00')||':'||to_char(mod(MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME),60),'FM00')||':'||to_char(mod(MAX(TXR.REAL_TIME_FRAME+TXR.DURATION_FRAME)-MIN(TXR.REAL_TIME),60),'FM00') "AS RUN DURATION",
TO_CHAR(TRUNC((MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) )/3600),'FM00')||':'||TO_CHAR(TRUNC(MOD(MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,3600)/60),'FM00')||':'||TO_CHAR(MOD(MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00')||':'||TO_CHAR(MOD(MIN(TXS.SCHEDULE_TIME_FRAME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00') "SCHEDULED TIME",
to_char(trunc((MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME))/3600),'FM00')||':'||to_char(trunc(mod(MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME),3600)/60),'FM00')||':'||to_char(mod(MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME),60),'FM00')||':'||to_char(mod(MAX(TXS.DURATION_FRAME),60),'FM00') "SCHEDULED DURATION"
FROM TX_RECON_INSTANCE_VIEW TXR, TX_SCHEDULE TXS, TX_SCHEDULE_RECON TXREC
WHERE TXR.TX_DATE=20100926 AND TXR.TX_TYPE='P'
AND TXR.TX_ID=TXREC.RECON_TX_ID(+)
AND TXREC.BASE_TX_ID=TXS.TX_ID(+)
GROUP BY TXR.TX_DATE, TXR.ITEM_ID
ORDER BY TXR.TX_DATE, TXR.ITEM_ID, MAX(TXR.REAL_TIME)--does this work for everyone now? let me know...thanks

Issue with min/max when vertical axis assigned to multiple series

Hi.
I have some simple charting code that is dynamically adding LineSeries to a chart as the user requests them from the gui. As each series is added the vertical axis is assigned to the series and then data is requested and assigned to the dataProvider on the series. This is all working fine however I have found that if I add a sceond series after the first series is displayed and assign the same vertical axis to the second series then the vertical axis seems to set teh min/max based only on the second series added and ignores the first series. It doesnt set to the max of both series and so I get an incorrect max set. If I add a 3rd series the same happens again and the first and second series values seem to be ignored and the axis is set based on the last series to be added.
Is this expected? Ive tried different variations of invalidating the data/series/styles to force it to refresh but I always get the same. It does refresh but based on only the values in the last added series.
What is odd is that if I add 2 series at the same time, and assign the axis to both of them and then request data for both and update the dataProvider on both of them the axis is configured correctly based on the max value of both series.
Any workarounds to make it do the right thing if they are added dynamically? Is this a bug or a known "feature"?
Any light anyone can shed would be appreciated.
I need to have the axis assigned to the series directly as I want to be able to use multiple axes. I have found that if I set the verticalaxis on the chart rather than the series then it works fine and sets the min/max based on the combined values of both series.
The vertical axis is just a simple LinearAxis.
Any help or suggestions would be appreciated.
Im using Flex 4.1
Tks
Dan

Adobe Flex LiveDocs seemed to indicate "Using multiple series in the same chart works best when the data points are in a similar range (such as a stock price and its moving average). When the data points are in numerically very different ranges, the chart can be difficult to understand because the data is shown on a single axis. The solution to this problem is to use multiple axes, each with its own range. You can plot each data series on its own axis within the same chart using the techniques described in Using multiple axes" and that link is here:
http://livedocs.adobe.com/flex/3/html/help.html?content=charts_types_11.html
I was going to tae a look at this myself, but the code posted here is quite complex, and I suspect incomplete.
If you refer to that link and still cannot solve the issue, I would try your best to boil down your code to a more simple example still exhibiting the issue, and then post that, along with any data and the simplified main app.
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Urgent: Chart Axis with Min, Max, Help needed.

Hi guys,
I am rushing on a report submodule in our application, which will go on live in a short time. We need to have charts which use min and max value from the table and calculate the appropriate interval as the scale of the axis, instead of the default interval.
I also tried to put page items into the Min&Max in the chart attributes, but always got the error message that asks for a number.
I have searched the forum and the conclusion I can made now, is that HTMLDB does not support parameterized value for chart axis.
So, my question is: if I have to do it manually, how should I do it? I don't have much experiences in pl/sql, so really need some help here.
Any input is appreciated.

Does anybody know whether a chart can be built on a collection? I've tried but didn't succeed.
If somebody has experiences on this, please let me know, so I won't waste more time on trying it if the answer is no. Thanks.

HT4623 whT is the differencebetween ipad mini mac ios with mini ipad without the ios.

What is the difference between apple mini ipad mac ios and mini ipad without mac ios?

The question doesn't make sense. There is no iPad without iOS. If you are talking about an iPad Mini and a Mac Mini, then one is a small tablet while the other is a desktop computer.
iPad Mini
Mac Mini

Getting BEA-000337 error in a TEST environment with no load at all.

Hi,
We're currently experiencing an unknown issue regarding the key BEA-000337. We've looked on the internet to understand what happens, but we are completely stuck.
<Jan 30, 2009 3:23:29 PM CET> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "712" seconds working on the request "weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl@cc1102", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.lang.Object.wait(Native Method)
weblogic.rjvm.ResponseImpl.waitForData(ResponseImpl.java:81)
weblogic.rjvm.ResponseImpl.getTxContext(ResponseImpl.java:108)
weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:109)
weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
xxx.yyy.sas.SASConnectorService_37hpy3_EOImpl_922_WLStub.getRoutingInfo(Unknown Source)
xxx.yyy.tp.manager.SASManager.getRouting(SASManager.java:1071)
xxx.yyy.tp.ccb.RetrievalOperatorProcess.execute(RetrievalOperatorProcess.java:139)
xxx.yyy.tp.Process.baseExecute(Process.java:598)
xxx.yyy.tp.Process.execute(Process.java:683)
xxx.yyy.tp.TransactionService.execute(TransactionService.java:291)
xxx.yyy.tp.TransactionService.executeProcess(TransactionService.java:241)
xxx.yyy.tp.TransactionService.handleAction(TransactionService.java:476)
xxx.yyy.tp.TransactionService.handleMessage(TransactionService.java:431)
xxx.yyy.tp.mdb.TransactionManagerMDBBean.onMessage(TransactionManagerMDBBean.java:126)
weblogic.ejb.container.internal.MDListener.execute(MDListener.java:429)
weblogic.ejb.container.internal.MDListener.run(MDListener.java:674)
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
On the internet everybody tells that the best thing to do is to extend the StuckThreadMaxTime. But we are executing only one single process on our own, on a test environment. So this can't be because WL is overloaded. When checking memory it is quite low (regarding its usual load), and there is a lot of available CPU.
The strangest thing is that this error occurs as follow:
An EJB is created correctly (we don't see issues in the logs), but this error occurs when we try to access it for the first time. I guess the SASConnectorService_37hpy3_EOImpl_922_WLStub class is our client proxy, that needs to call our real EJB on another instance of Weblogic. But we see no trace of that EJB on our distant server. It is fully reproducible, since everytime we launch it, we get that error.
If anybody has a lead, or at least a clue, I take it.

My guess -
1) Networking issue
2) A long transaction(could be global or your EJB transaction) that you do really need more than 10 mins to finish it.
I would check netstat output for 1) and time the EJB transaction.
If your server is not hang and still accepting request, you can actually ignore it. Or you can tune stuck thread max time higher(longer time allow for stuck warning) so this message will stop bugging.

After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20

Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
Platform version '1.9.2.18' is not compatible with
minVersion>=1.9.2.20
maxVersion<=1.9.2.20"
That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?

You're welcome

Thread Pool with Min,Max. and other thread parameters

hello,
I found an Implementation of ThreadPool in the java.sun.com,but it didn't have the minimum,maximum no. of threads implemented in the code.
Could you help me find out an implementation of Thread Pool,that keeps track of minimum no. of threads,max. no. of threads in the pool,the increment size of threads,number of idle threads,idle time allowable for a thread,etc...
I also need to know if it is possible to have >5000 threads in a ThreadPool,beacuse I get OutofMemoryError,when I used a ThreadPool( which didn't have any of the above-mentioned parameters!)
Thanks!!!

Having greater then 5000 threads is a sign of a problem with your design. Threads are relativly costly
beasties. The idea of using a pool for your threads is that you won't need to use 5000 threads
simultaniously. Most OS's will have problems trying to create this many threads per process (unless you
tune the OS itself (which is normally not too difficult))
matfud

Hello, as its orientation reinstalled the latest version of iTunes and connect to update my iFone. Done that itunes asked me a backp and continued to install, in the middle of the procedure he detected an unknown error (2003) I am now with my iFone withou

Hello Vinay, as its orientation reinstalled the latest version of iTunes and connect to update my iFone. Done that itunes asked me a backp and continued to install, in the middle of the procedure he detected an unknown error (2003) I am now with my iFone without starting only on screen showing the itunes iconwith a usb cable. Please have a solution for a lot of informationand photo to save it. Already agradço your cooperation.

ive also uninstalled itunes and re-installed still dosent detect my fone when it does its takes ages to connect, the my laptop freezes and cant get out of itunes

Min-Max Planning concept

Hi Neils,
Can you please throw a light on --> Min-Max Planning Concept and what is the formula for Min-Max
regds
MRR

Hi MRR,
Min-max planning is used to maintain inventory levels for all of your items or selected items. With min-max planning, you specify minimum and maximum inventory levels for your items. When the inventory level for an item (on-hand quantities plus quantities on order) drops below the minimum, Oracle Inventory suggests a new purchase requisition, internal requisition, move order, or job to bring the balance back up to the maximum.
See the Inventory Users Guide > Planning and Replenishment > Min-Max Planning for more detailed description of the principles behind. In addition to Min-Max you may want to consider Reorder Point Planning where you bring demand figures into the calculations.
If you would like to have sales orders or production demands on end-item or sub-assembly levels influence the planning of components then a type of MRP is needed to break down a product structure to lower level material requirements. For even more advanced planning where capacities, constraints and may be even different optimizations objectives are to be considered you have to look at the Advanced Plannning Suite of applications.
Hope this helps ypu in the right direction.
/Niels LM

Want to set Min Max for a material for PD MRP type

Hi,
I know Maximum stock level field in Material master MRP 2 view ? but where do i maintain minimum stock level? not procured?
My client wants to set up his inventory with Min Max levels using MRP PD?
Thanks and Apprecaites help.
Regards,
Siva

Hi,
If you want to maintain a Max and Min stock level, Maximum stock is shown straight away, you cannot find the Minimum field directly.
if you want to use MRP type PD then go for safety stock that will be your minimum stock level
or else use Re-order point planning, re-order point will be your minimum and Max-level as maximum.
Thanks
Satya

Strange error in mapping test: Structure with min!=max without mapping

Similar Messages

Maybe you are looking for