Strange error message duting Creation bid invitation

hi!
i try to create Bid invitation and add Bidder with contact person
and get strange error message
Message not found (in main memory)
Do you know what's a problem?
Thanks.

Hi
<b>Which System version are using ?</b>
<u>Please go through the following SAP OSS Notes -></u>
Note 1037262 BBP_QUOT_BOB: Surrogate Bid receives Message not found error
Note 787154 Unreasonable error message in contract output forecast
Note 732472 Incomplete attributes of a user lead to termination
Note 684024 Error "Message not found (in main memory)"
Note 641960 New processing of terms of payment in EBP 3.5
Note 502534 Message "Log not found (in main memory)" in CW
Hope this will definitely help.
Regards
- Atul

Similar Messages

Strange error message when I tried to use the "collaborate" function under "File"

Has anyone else met this before? : I am trying to share my project with my team members. Tried File -> Collaborate and then try three options under it. Non e of them works. It asks for your Adobe ID in order to sign in and upload. However, every time I typed in my Adobe ID and password, it gave me strange error messages. The first time it says: User has not verified email address yet. I have been using this Adobe ID since 2008 or 2009 and of course I have verified my email address. But to make sure, I went back to my email box and search for emails about Adobe ID verification but I didn't find any (I never delete emails such as this).
Then I tried to register a new Adobe ID. This time when I tried to singn in with the new Adobe ID, it will either say "Network may not be available" (which is not true because I am able to surf on the Internet at the same time), or it says "User has not accepted user condition/agreement".
I feel so frustrated because I feel this is definitely not my mistake which caused the failure of log in.
Hope someone can tell me what the reason is and how to fix it though.
Thanks a lot.

Hi Lilybiri,
Thanks for your quick response. I followed your suggestion and verified my Adobe ID on acrobat.com.
Now I can enter the collaborate function. However, everytime when I tried to send it to myself (for test purpose) I got another error message "You need to enter a valid emaill address". I saw someone else on this forum has met the same problem. Do you have any suggestion on what is the possible reason for this to happen?
Again, thanks for the fast response. You have been helping me and other ppl so much.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
TKS !

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

Strange Error Message In Return Order - (CRM B2C Internet Sales)

I have a strange error message when creating a return order with reference to a standard order in internet sales B2C scenario.
err message: Document 900038963 doesn't have document category but (Notification E V2 068)
and the standard order 900038963 is error free.

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

Strange Error Message at start up of FCE

Hello all. I've got a strange error message at the Startup of FCE 3.5.1 on a MacBook Pro 2.33 C2D.
It's this--
"Unable to locate the following External devices:
"Built-in Audio
But FCE runs fine. I'm not sure what it's asking for. Any suggestions?
MacBook Pro 2.33 C2D with 2GB of RAM Mac OS X (10.4.9) FCE 3.5.1, attached to LaCie 500GB drive and using Sony A1P camera

Try uninstalling your MobileMe control panel.

ITunes won't launch and I get a strange error message-

My iTunes will not launch and I get this strange error message: The iTunes application could not be opened. The disk could not be read from or written to. But I have no problems with the disk it is on, which is my harddisk. Help, help, help…

I have now tried a billion things: None of them work. I still get the same error message, when I try to launch iTunes after logging into my user profile. However, I can launch iTunes 6.0.1 if I create another userprofile on my computer and log into that. But that isn't very helpful. I have also tried removing iTunes 6.0.1 and installing iTunes 4.7 instead. I can actually launch that. However, I cannot connect to the iTunes music store using iTunes 4.7 nor can I play any of the music purchased from the iTunes music store. What am I to do, except curse Apple for creating a version of iTunes that many people seem to have problems with?

Capture problem -- strange error messages -- computer freezes

Upon 25 minutes or so into capturing, I get a strange error message to this effect: "analyzing DV audio -- validating audio data" -- the video slows to a crawl until it completely freezes -- rainbow wheel whirls nonstop -- sometimes command-option-escape force quits it, sometimes not and I have to reboot the computer. Sometimes I don't get the error message -- the computer capture screen freezes but the camera keeps going. Anyway here are the specs: Intel dual-processor iMac 300 GB with Mac OS X Leopard 10.5.5., format Mac OS Extended journaled. External hard drives Western Digital 500 GB formatted the same; QT 7.5.5; FCE 4.0.1; Settings: DV NTSC 48 Khz. Format & use - DV NTSC. Device control preset: firewire NTSC. Camera - Canon 900 ZR (miniDV tapes) hooked up to back of iMac via 6 pin shiny orange firewire for capture. I capture to Mac hard drive and then move video to external hard drive. Yes there is enough space and RAM. I had this problem before except the error message was "locating time break." So it was suggested I capture to hard disk. Seems like it's always something! I've lost hours trying to fix this problem. Hope someone can help. Thanks.

12 bit. Haven't been having any audio problems with FCE. However, I tried the nightmare iDive and never got audio (much less anything else) to work with that. So I uninstalled it and asked for my money back.

A strange error message on a code-modified page

I am trying to implement this plugin on a simple Muse page:
http://www.catchmyfame.com/catchmyfame-jquery-plugins/jquery-beforeafter-plugin/
Simple addition of working code to the Muse page produced a strange error. "beforeAfter is not a function"
By trial and error, a fix was removing one Muse function! The page then seemed to work without problem from my hard drive. But when added to my server, a Muse-related error message pops up. After dismissing the error, the page seems to work. I have been unable to figure out this mysterious error. Any suggestions will be appreciated.
http://www.rupestrian.com/Inscription_Point.html

Come on, Adobe Muse engineers. Give me a hand with this problem. Someone must know what this error means.

Error Message While creation of SC No commitment item entered in item

Hi,
I am creating SC while creation following error message is appearing :-
No commitment item entered in item 1 10 6534
Where 10   :Comp code
           6534 : CC
Is there any thing commitment related missing in SRM ?
Thanks,
Sachin

Hi,
run TA FS01
-> G/L Account        <enter your G/L account>
     Company Code    <enter the company code - i think its 6534 in your example>
     -> Tab "Create/bank/interest"
         -> "COMMITMENT ITEM" <======
I hope that helps!
Best regards,
Georg

Creating Error message during creation of SC using create limit item option

Hi,
I am using option "create limit item" option to create a service SC, now i need to set an Error message if the value in the "value limit" field is lower than the value in the "expected value" field during the creation of sc and i should not be able to order such cart. Currently there is no message displayed and i can create a SC with the lower value in the value limit field.
Please suggest.
Regards
GGL

Hi. Try BBP_DOC_CHECK_BADI to issue a custom error.
Regards,
Dave.

Error message while creation of material for wrong warehouse no

dear all,
i have assigned plant and storage location to warehouse no x,created the material for the same.our question is why the system is not showing warning or error message if we create the same material ,plant and stg location combination to a diff warehouse no Y.
Eg:
material    plant   stg location   warehouse no
12345      1000   1001             111
12345      2000   2001             111 ?????.how is this possible as i have assigned this plant and stg location combination to a different warehouse no:222
Is there any settings available in SPRO to solve out this problem.
Regards,
velu

Hi,
System will not give any error message at the time of Creation of materials, you can create for any other Warehouse no which is not assigned to Plant , Str loc.
But the system will throw the error while doing any transaction with respect to the Material with different combination of plant , str loc, warehouse no
This is drawback of Standard SAP.
rgds
gsc

No approval workflow found error while processing the Bid Invitation

We are working on SRM 5.0 (SP level6). We are able to create the bid invitations successfully from the sourcing cockpit. However while saving the changes in the bid invitations, system shows the error "No approval workflow found". When checked in SWB_PROCUREMENT , no workflow exists for object" BUS2200, Bid Invitation EC"in the standard SRM.
Kindly confirm what is missing...
NNK

Hi Nitin,
Use T-code OOCU - Task custamising overview. Then SRM-EBP --> SRM-EBP-WFL then active event linking.
Please activate WS145000026 for automatic approval of bid. or WS145000027 for one step approval of bid invitation.
This will help to solve your problem. IF not please reply me the error.
Regards
Apparao.

Strange error messages being logged.

Hi, my first post!
Not sure if this is the right place to ask this, but i'm getting a strange issue ever time I run Adobe Muse.
I have a fully paid up subscription, and the program runs fine, but every time I run it, two files appear in my documents folder, Muselog.txt and MuseLogPrefs.xml.
The MuseLog file contains several identical error mesages, timestamped a few seconds apart.
They are all the same and say -
"Build 6: Oct 5 2012 0:22:48.046: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)".
This is then repeated twice more, with a later timestamp.
Anyone any idea why this is happening?
As I said, the program seems to be working fine, but what's this about a serial number, i've never had one!
And why is it logging an error all the time that "may not be an error", every time I run the program!
Any suggestions gratefully received.
Cheers, Dave.

Thanks Sachin!
I did wonder if it might be checking for something that's not actually relevant to my installation of Muse.
I did activate Muse online, and it seems to be happy that I have a valid subscription, so I guess it doesn't matter.
Adobe should address this though, as it makes it look as if something in wrong with the validation of the program.
Cheers, Dave.

Strange error message - linked lists (again)

I have to keep at this linked list thing if I'm ever going to really understand it!!
I have created a method to create a linked list via user input. I'm receiving only one strange ERROR, which states:
"This method must return a result of of type ListADT.Node."
And I have just started building my class ListADT...
class ListADT{
public Node createList(int aNumber){     // THIS IS WHERE THE ERROR POINTS
      * integer variable aNumber is the length of the list user wishes to create.
     Scanner console = new Scanner(System.in);
     int number;                    // declare variable number as an integer.
     Node newNode = new Node();          // declare and initialize newNode.
     Node first = new Node();          // declare and initialize first.
     Node last = new Node();               // delcare and initizlize last.
     try
          for(int i = 0; i <= aNumber; i++){               // for loop to enter numbers to build list.
          System.out.println("Please enter an integer: ");     // prompt user.
          number = console.nextInt();                    // assign user input to variable number.
          newNode.info = number;          // assign number to newNode;
          if(first == null){               // checks to see if Node first is a null value.
               first = newNode;          // if true, then this node is the first and last node in the list.
               last = newNode;
          else{                              // if first is not null, then newNode is placed at the end of the list.
               last.link = newNode;
               last = newNode;
          return first;
     catch (InputMismatchException imeRef)     //Catches non-integer values
          System.out.println("You entered a non-Integer! " + imeRef.toString());     //Prints error message

Now why can't the error messages help
out a little more? I would have never guessed that
there was a problem with the catch block not
returning anything!!The message was pretty informative -- it told you what was wrong. If the compiler could be so smart as to be able to tell you exactly what to fix, then the compiler would be able to write code all by itself -- and then you'd be out of a job.

Strange error message getting displayed

Hi All,
We are facing a strange problem when we type in the following URL http://<host>:<port>/irj/blah.jsp
The error message says that the file blah.jsp does not exist and then gives the complete directory structure for e.g. c:\usr\sap\<instance name>\JC<Instance Number>\.....irj\.....\blah.jsp does not exist.
We want to prevent this directory structure from getting displayed and display a generic error message.
Please let us know how this will be possible.
Regards
Sidharth
Message was edited by: Sidharth Deshpande

Hi,
If you want to display your error message you must add in "apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\web.xml" file the following tags:
<error-page>
<error-code>404</error-code>
<location>/my_error_page.jsp</location>
</error-page>
Now when error code 404 occurs then this my_error_page.jsp will be displayed instead of default error page.
In my_error_page.jsp you may process the errors as you want.
Best Regards,
Violeta Georgieva
Message was edited by: Violeta Georgieva

Strange error message duting Creation bid invitation

Similar Messages

Maybe you are looking for