Strange error message when building dvd

Hi
I have a dvd project, at about 80% progress of the build, I get the following error
Has anyone got any idea what this may be.
Many thanks
Chris Anderson

Hi
Thanks for your reply.
I do have a blu-ray burner, and i was creating a image, the error came up during the transcode. I have 12gb memory - what do you mean by tons ? is 12 enough.
I am working with avchd 1920x1080, that i have successfully used before.
I would then intend to burn the iso file afterwards, so the error is purely in encore, not relevant to burner as such
I did actually go the AME route, then import into encore and it worked fine, so it appears the transcoding in encore is the issue.
It would be helpful offcourse if the error message gave more info or what stage it was at at the time of the error.
Thanks again
Chris

Similar Messages

  • Strange error message when I tried to use the "collaborate" function under "File"

    Has anyone else met this before? : I am trying to share my project with my team members. Tried File -> Collaborate and then try three options under it. Non e of them works. It asks for your Adobe ID in order to sign in and upload. However, every time I typed in my Adobe ID and password, it gave me strange error messages. The first time it says: User has not verified email address yet. I have been using this Adobe ID since 2008 or 2009 and of course I have verified my email address. But to make sure, I went back to my email box and search for emails about Adobe ID verification but I didn't find any (I never delete emails such as this).
    Then I tried to register a new Adobe ID. This time when I tried to singn in with the new Adobe ID, it will either say "Network may not be available" (which is not true because I am able to surf on the Internet at the same time), or it says "User has not accepted user condition/agreement".
    I feel so frustrated because I feel this is definitely not my mistake which caused the failure of log in.
    Hope someone can tell me what the reason is and how to fix it though.
    Thanks a lot.

    Hi Lilybiri,
    Thanks for your quick response. I followed your suggestion and verified my Adobe ID on acrobat.com.
    Now I can enter the collaborate function. However, everytime when I tried to send it to myself (for test purpose) I got another error message "You need to enter a valid emaill address". I saw someone else on this forum has met the same problem. Do you have any suggestion on what is the possible reason for this to happen?
    Again, thanks for the fast response. You have been helping me and other ppl so much.

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • Getting error message when burning DVD

    I keep getting an error message when I try to burn my DVD in iDVD 08. I have imported the movie in quicktime format from iMovie HD and everything works fine until I go to burn the project. I renders everything else but when it get to the movie it has an error and cancels the burn.

    Suggestion: Not a bad idea to test the disc image with apple's dvd player app prior to burning.
    Click Here
    I prefer to use Toast for burning an image to Dvd-R (verbatim at 4x or slower for best results).
    Click Here
    Not my personal favorite choice ... however it is possible to burn thru apple's disc utility like this:
    Click Here:
    Hope these help but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • [SOLVED] Strange error message when updating Pacman

    I get a following error message when updating pacman and doing system upgrades:
    [mike@goat ~]$ sudo pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    looking for inter-conflicts...
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    I tried running pacman -Syyu, but that did not seem to solve the problem.  There is /var/lib/pacman/local/openssl-0.9.8l-1/
    directory but it is empty.  When running pacman -S openssl, I get the above error message as well but it spans for hundreds of buffer lines.  In the end I end up with this:   
    openssl: /usr/share/man/man3/ssl.3.gz exists in filesystem
    openssl: /usr/share/man/man3/ui.3.gz exists in filesystem
    openssl: /usr/share/man/man3/ui_compat.3.gz exists in filesystem
    openssl: /usr/share/man/man3/x509.3.gz exists in filesystem
    openssl: /usr/share/man/man5/config.5.gz exists in filesystem
    openssl: /usr/share/man/man5/x509v3_config.5.gz exists in filesystem
    openssl: /usr/share/man/man7/des_modes.7.gz exists in filesystem
    Errors occurred, no packages were upgraded.
    [mike@goat ~]$
    Anybody have any insight?
    Thanks,
    maschinetheist
    Last edited by maschinetheist (2010-03-02 17:18:42)

    Bregol wrote:
    Sounds to me like openssl is installed on your system but the info on it is now missing from the local pacman database (/var/lib/pacman/local).  In other words, pacman forgot that you installed it.  So in your second clip of code, pacman is complaining that files belonging to openssl exist in your filesystem, since you do have it installed but it no longer knows that.
    Don't know if this is the proper way to fix it, but I imagine forcing a reinstall of openssl (pacman -Sf openssl) should get pacman to reinstall openssl so that it knows it is installed.
    Bregol,
    pacman -Sf openssl
    seemed to have fixed it.  Did not know of the force reinstall option.  The necessary directories in /var/lib/pacman/local/openssl have been created.
    Thanks,

  • Error message when burning dvd

    I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when I open iTunes. On a third and forth attempt the dvd gets spit out without any burn attempt.
    Strangely, the first dvd I put in that was not readable on my machine I put in a Windows machine, which appears to read the dvd and I see the folders that I tried to burn, but obviously cannot open the files because it is a Windows machine.
    I have read the discussions and dvd issues seem to be rife. I thought I had applecare but it appears it hasn't been registered and this issue is being addressed with apple. So I have not managed as yet to get any apple support.
    Can anyone shed any light on my problem?
    Thanks
    PS: The reason for the back-ups is that I am soon going to upgrade to Tiger. I see from discussions that issues about dvds are rife.

    I didn't note the message I'm afraid. However I have just tried to burn a dvd again and got the message 'An error occurred while burning the disc. This disc cannot be used.' I have tried the burn with two different dvds and I don't think the discs are the wrong ones. One was DVD-RW and the other was DVD-R. I recall that on another occasion there was an error number, which might have been 303, but I can't be sure of that figure.
    Whilst on burning to disc, I want to make an image of a folder. I follow the instructions of navigating to the folder and click on it but the resulting image is only of the folder and not its contents. Am I doing something wrong here too?
    Thanks.

  • Error Message When Importing DVD

    I used PQDVD to copy several DVDs and have them along with all of my music files stored to an external hard drive.
    I have never had an issue adding files to iTunes before, but now I am getting the following error message:
    "There is not enough room on "HPNOTEBOOK" to copy all of the requested files. iTunes will copy as many files as possible."
    The strange thing is, there is 16gb of free space on my "C" drive and 217gb on my "E" drive.
    Does anyone out there have a clue as to how to solve this issue?
    HP Pavilion   Windows XP  

    I have answered my own question!
    I dug a little deeper, and found that even though I had saved all of my files to my "E" drive, it was still storing the music, videos, etc. on my "C" drives when I added them to my iTunes! I didn't realize this until my free space went from 16gb to 14gb in the time it took for me to post my question!
    I have changed the setting so that the files are now being stored and accessed from my "E" drive only!
    HP Pavilion   Windows XP  

  • 1771 error message when burning dvd

    I upgraded to the newest itunes and now when i try to burn a dvd i get a 1771 error message  Had no problem just before the upgrade. Is there a way to fix this or a way to go back to the old version  Please help

    Is there a way to revert to my older version of itunes and not lose my library along the way?

  • Strange error message when compiling an IPA ("multiple L$start$ labels found at same address in...")

    I get this message when compiling an IPA with AIR 3.6:
    ld: warning: multiple L$start$ labels found at same address in __ZN9NetStream12DispatchProcEP10NativeInfo at offset 0x06C0
    Googling a bit, it seems it's an error message from this C++ class:
    http://opensource.apple.com/source/ld64/ld64-133.3/src/ld/LinkEdit.hpp
    So I suppose it's a bug in the AIR for iOS compiler. Any clues about why am I getting that warning message?

    I've been getting this message for quite a while, but I think a fix will soon be needed. I got the following message from Apple:
    ==============
    Dear developer,
    We have discovered one or more issues with your recent delivery for "Quazar". Your delivery was successful, but you may wish to correct the following issues in your next delivery:
    Non-PIE Binary - The executable 'Quazar.app' is not a Position Independent Executable. Please ensure that your build settings are configured to create PIE executables.
    ===============================================

  • Error message when building

    I keep getting this message when I use Burn to Disc - then hit build.
    "The bit rate at 00:00:07:11 in timeline is too high for DVD. Lower the bit rate by reencoding or removing content from the timeline".
    The video on the timeline is 2 min long and at the time code mentioned, it is simply a zoom out of a sign. I encoded the video using the automatic setting and I am using standard DVD-R.

    The maximum bit rate the DVD-Video spec allows for video
    i plus
    audio is 9.8Mb/s. Normally Encore's automatic transcoding shouldn't exceed this, but there is a small chance of a fluke. You could try to let Encore do the transcoding again. Set the
    i maximum
    bit rate to 7Mb/s.
    Another cause for the issue could be that you changed the audio
    i after
    Encore had transcoded the video. E.g. by changing the audio format from Dolby Digital (AC3) to PCM, or by adding extra audio tracks to the timeline.

  • Strange error message when starting ITunes, ITunes doesn't recognise devices for wifi sync

    I have other wifi problems with my IMac running Mountain Lion but this is the most annoying. When I start ITunes it doesn't recognise that I have my IPhone 5 and my IPad 2 sitting connected to the same wifi network and waiting to sync.
    In the Console I get this error exactly when ITunes starts up:
    24/11/2012 12:56:36.038 genatsdb[220]: *GENATSDB* FontObjects generated = 598
    24/11/2012 12:56:36.631 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 1
    24/11/2012 12:56:36.633 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 2
    24/11/2012 12:56:36.635 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 3
    24/11/2012 12:56:36.637 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 4
    24/11/2012 12:56:36.639 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 6
    24/11/2012 12:56:36.641 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 7
    24/11/2012 12:56:36.643 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 8
    24/11/2012 12:56:36.644 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 9
    24/11/2012 12:56:36.646 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 10
    24/11/2012 12:56:36.648 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 11
    24/11/2012 12:56:36.649 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 12
    24/11/2012 12:56:36.651 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 13
    24/11/2012 12:56:36.653 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 14
    24/11/2012 12:56:36.655 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 15
    24/11/2012 12:56:36.656 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 16
    24/11/2012 12:56:36.658 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 17
    24/11/2012 12:56:36.660 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 18
    24/11/2012 12:56:36.661 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 19
    24/11/2012 12:56:36.663 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 20
    24/11/2012 12:56:36.665 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 21
    24/11/2012 12:56:36.666 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 22
    24/11/2012 12:56:36.668 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 23
    24/11/2012 12:56:36.670 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 24
    24/11/2012 12:56:47.678 iTunes[239]:  AVF KeyExchange Version from driver for Certificates 1
    Google search has explained to me that this is related to Bonjour but nothing further. I have done the 'usual' - booted in safe mode, repaired permissions, updated software, reinstalled Mountain Lion via Disc Recovery, restarted my modem etc.
    Before I just wipe the hard drive and start again from scratch, maybe there's something obvious I'm not doing? Every other device in the house (2 x Iphones, 2 x Ipads, 1 Apple TV, 2 wifi radios and 1 other IMac desktop) have no problems with the wifi network.

    I am having similar issue.  Getting these same 24 error messages everytime I start iTunes. Sharing is already off.
    5/9/13 8:20:04.107 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 1
    5/9/13 8:20:04.109 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 2
    5/9/13 8:20:04.111 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 3
    5/9/13 8:20:04.113 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
    5/9/13 8:20:04.115 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 6
    5/9/13 8:20:04.117 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 7
    5/9/13 8:20:04.120 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 8
    5/9/13 8:20:04.122 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 9
    5/9/13 8:20:04.124 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 10
    5/9/13 8:20:04.125 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 11
    5/9/13 8:20:04.127 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 12
    5/9/13 8:20:04.129 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 13
    5/9/13 8:20:04.131 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 14
    5/9/13 8:20:04.133 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 15
    5/9/13 8:20:04.135 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 16
    5/9/13 8:20:04.137 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 17
    5/9/13 8:20:04.140 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 18
    5/9/13 8:20:04.142 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 19
    5/9/13 8:20:04.144 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 20
    5/9/13 8:20:04.146 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 21
    5/9/13 8:20:04.148 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 22
    5/9/13 8:20:04.150 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 23
    5/9/13 8:20:04.152 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 24

  • Strange error message when printing to PDF

    I am surprised that no one else has reported this issue. Searching the net, I found only one other mention of it. Using Adobe Acrobat Professional 8.1.2, when printing a document from any application using the Adobe PDF printer, the document will print correctly; however, the printer icon with a question mark will appear in the system tray and the error message "This document failed to print" will appear. When I open the Adobe PDF printer, the document is there with the status "Error - Printing".
    I can successfully delete the document (with error), though the actual .pdf document is created just fine; it is just returning an error and holding the document after every print. I have tried deleting the Adobe PDF printer, reinstalling Acrobat (both using a repair installation as well as uninstalling and reinstalling) all with the same results.
    There is nothing being logged into the system or application logs, either. I have seen this happen with two OSs at work, Vista Home Premium and WinXP SP3. Can someone guide me to a solution?

    Well I can give you what I did to get around the problem.  I am running Adobe X pro on windows 7.
    1.  The print job in queue, cancel it so that it is deleted.  You now should have no jobs pending.
    2.  Go to Control Panel\Hardware and Sound\Devices and Printers(Win7) or just the printer and devices for your OS.  Yes this must be done with Admin privilages.
    3.  Go to Printer Properties for the Adobe PDF printer.
    4.  Select the ports tab.  Mine was on Com3.
    5.  Select Add a Port and call it Adobe Printer or something.
    6.  Select the check box and select apply.
    You should now print with no errors.
    -G
    Yes I am aware this has been a year, but this has happened over several versions.

  • Error message when burning DVDs

    Hi, I've been burning DVDs on my computer for over a year. However I'm now getting the following error message:
    sense key = medium error
    sense code = 0 x 57
    Unable to recover table of contents.
    I've tried documents and video and a couple of different blank DVD brands...Is it stuffed or fixable. FYI the cd burner is working fine and its reading DVDs Ok as well.
    Thanks
    Peter

    Thanks for the suggestion.
    I ran the Onyx on both my machines and still have the same problems.
    The PB 1.25 whirls and spits the discs out (any disc).
    The iMac 800 now has a new error code since running Onyx.
    0x80020022 instead of 0x8002006e
    The message reads "communication to the disc drive failed."
    I'm going to try one last thing with the iMac. That is using those expensive Apple-made and approved DVD's. I'm using Maxell DVD-RW. Never had a problem with them on the PB, never used them on the iMac. I'm off to the dealer... I'm buying an external DVD burner for the PB- $200 vs. $600... it's a no brainer, just none of the convenience... best, Edward

  • Please help - strange error message when trying to download i tunes

    Hi
    When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar. I have tried all thr suggestion on the web, deleted i tunes and quicktime, deleted temp folders and even changed the settings in myconfig, but what ever i do i still get the same message!
    HELP PLEASE

    When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
    ... that's an unusual one.
    could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
    hudgie: Taking screenshots to help with problems

  • Strange error message when importing one schema into another

    Hello,
    using Oracle Workshop for Weblogic 10.3, I am trying to define a new schema A which imports the namespace of an already existing schema B. The schema validator states that schema B is valid.
    However, when I try to add an import directive in the design view and try to select schema B as the schema location I get the error message that B.xsd is an invalid schema file. When I manually add the import directive in the source view, I can refer to all elements of the namespace defined in schema B. Unfortunately, schema A now is marked as invalid with the error message "The dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."
    Even external schema validation tools do not find any validation errors in schema B.
    Any ideas?
    Kind regards
    Alexander

    The dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."http://forums.oracle.com/forums/thread.jspa?threadID=1048184&tstart=0
    Regards,
    Anuj

Maybe you are looking for