Strange error messages began today

Does anyone know what this means? (see message below) Everytime I open mail now I get these messages about each of my accounts with different email providers. The options I can choose are Open Read Only, Quit, and Open Anyway. It says if you "Open Anyway" it can damage an already open account, or something like that...
Any ideas what's gone wrong?
The mailbox “~/Library/Mail/[email protected]@pop.gmail.com/Deleted Messages.mbox” is currently locked by “(null)” on host “959F927E
”. If you open a mailbox that already is in use, you may damage its contents.

Hi meredyth
Do you have a backup of your data on an external disk?
The iCal problem maybe nothing more than the preferences files corrupted
in your User Library, open the Preferences folder and drag the following onto the desktop
com.apple.iCal.AlarmScheduler.plist
com.apple.iCal.helper.plist
com.apple.iCal.plist
start iCal from the Applications folder rather than the Dock
if it starts then Backup Database using the iCal File menu - put it in a folder in your Documents folder
do the same with Address Book - I use the same folder as the iCal backup
that make reloading easier if you have to reinstall - again it will need backing up to an external disk
Is the mouse going blue something new, or did it happen before the mailbox problem
I assume the mailbox is still locked and as I have no experience of gmail.com it would be worth talking to them.
If were my machine I would be looking to do a clean reinstall and so Disk 1 is vital unless you wanted to go to 10.4 but either way you MUST have a backup
I shall be offline until tomorrow but post back and let me know how you are getting on
Good luck
chris

Similar Messages

  • Strange error message when I tried to use the "collaborate" function under "File"

    Has anyone else met this before? : I am trying to share my project with my team members. Tried File -> Collaborate and then try three options under it. Non e of them works. It asks for your Adobe ID in order to sign in and upload. However, every time I typed in my Adobe ID and password, it gave me strange error messages. The first time it says: User has not verified email address yet. I have been using this Adobe ID since 2008 or 2009 and of course I have verified my email address. But to make sure, I went back to my email box and search for emails about Adobe ID verification but I didn't find any (I never delete emails such as this).
    Then I tried to register a new Adobe ID. This time when I tried to singn in with the new Adobe ID, it will either say "Network may not be available" (which is not true because I am able to surf on the Internet at the same time), or it says "User has not accepted user condition/agreement".
    I feel so frustrated because I feel this is definitely not my mistake which caused the failure of log in.
    Hope someone can tell me what the reason is and how to fix it though.
    Thanks a lot.

    Hi Lilybiri,
    Thanks for your quick response. I followed your suggestion and verified my Adobe ID on acrobat.com.
    Now I can enter the collaborate function. However, everytime when I tried to send it to myself (for test purpose) I got another error message "You need to enter a valid emaill address". I saw someone else on this forum has met the same problem. Do you have any suggestion on what is the possible reason for this to happen?
    Again, thanks for the fast response. You have been helping me and other ppl so much.

  • Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

    Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
    First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
    TKS !

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

  • Strange error message  duting Creation bid invitation

    hi!
    i try to create Bid invitation and add Bidder with contact person
    and get strange error message
    Message not found (in main memory)
    Do you know what's a problem?
    Thanks.

    Hi
    <b>Which System version are using ?</b>
    <u>Please go through the following SAP OSS Notes -></u>
    Note 1037262 BBP_QUOT_BOB: Surrogate Bid receives Message not found error
    Note 787154 Unreasonable error message in contract output forecast
    Note 732472 Incomplete attributes of a user lead to termination
    Note 684024 Error "Message not found (in main memory)"
    Note 641960 New processing of terms of payment in EBP 3.5
    Note 502534 Message "Log not found (in main memory)" in CW
    Hope this will definitely help.
    Regards
    - Atul

  • Strange Error Message In Return Order - (CRM B2C Internet Sales)

    I have a strange error message when creating a return order with reference to a standard order in internet sales B2C scenario.
    err message: Document 900038963 doesn't have document category  but (Notification E V2 068)
    and the standard order 900038963 is error free.

    Hi,
    I notice there is a Z class being called.
    Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
    You should check this customized class.
    Cheers,
    cady.

  • Strange Error Message at start up of FCE

    Hello all. I've got a strange error message at the Startup of FCE 3.5.1 on a MacBook Pro 2.33 C2D.
    It's this--
    "Unable to locate the following External devices:
    "Built-in Audio
    But FCE runs fine. I'm not sure what it's asking for. Any suggestions?
    MacBook Pro 2.33 C2D with 2GB of RAM   Mac OS X (10.4.9)   FCE 3.5.1, attached to LaCie 500GB drive and using Sony A1P camera

    Try uninstalling your MobileMe control panel.

  • ITunes won't launch and I get a strange error message-

    My iTunes will not launch and I get this strange error message: The iTunes application could not be opened. The disk could not be read from or written to. But I have no problems with the disk it is on, which is my harddisk. Help, help, help…

    I have now tried a billion things: None of them work. I still get the same error message, when I try to launch iTunes after logging into my user profile. However, I can launch iTunes 6.0.1 if I create another userprofile on my computer and log into that. But that isn't very helpful. I have also tried removing iTunes 6.0.1 and installing iTunes 4.7 instead. I can actually launch that. However, I cannot connect to the iTunes music store using iTunes 4.7 nor can I play any of the music purchased from the iTunes music store. What am I to do, except curse Apple for creating a version of iTunes that many people seem to have problems with?

  • Capture problem -- strange error messages -- computer freezes

    Upon 25 minutes or so into capturing, I get a strange error message to this effect: "analyzing DV audio -- validating audio data" -- the video slows to a crawl until it completely freezes -- rainbow wheel whirls nonstop -- sometimes command-option-escape force quits it, sometimes not and I have to reboot the computer. Sometimes I don't get the error message -- the computer capture screen freezes but the camera keeps going. Anyway here are the specs: Intel dual-processor iMac 300 GB with Mac OS X Leopard 10.5.5., format Mac OS Extended journaled. External hard drives Western Digital 500 GB formatted the same; QT 7.5.5; FCE 4.0.1; Settings: DV NTSC 48 Khz. Format & use - DV NTSC. Device control preset: firewire NTSC. Camera - Canon 900 ZR (miniDV tapes) hooked up to back of iMac via 6 pin shiny orange firewire for capture. I capture to Mac hard drive and then move video to external hard drive. Yes there is enough space and RAM. I had this problem before except the error message was "locating time break." So it was suggested I capture to hard disk. Seems like it's always something! I've lost hours trying to fix this problem. Hope someone can help. Thanks.

    12 bit. Haven't been having any audio problems with FCE. However, I tried the nightmare iDive and never got audio (much less anything else) to work with that. So I uninstalled it and asked for my money back.

  • A strange error message on a code-modified page

    I am trying to implement this plugin on a simple Muse page:
    http://www.catchmyfame.com/catchmyfame-jquery-plugins/jquery-beforeafter-plugin/
    Simple addition of working code to the Muse page produced a strange error. "beforeAfter is not a function"
    By trial and error, a fix was removing one Muse function! The page then seemed to work without problem from my hard drive. But when added to my server, a Muse-related error message pops up. After dismissing the error, the page seems to work. I have been unable to figure out this mysterious error. Any suggestions will be appreciated.
    http://www.rupestrian.com/Inscription_Point.html

    Come on, Adobe Muse engineers. Give me a hand with this problem. Someone must know what this error means.

  • Locale Error Message After Todays Update [Solved]

    I experienced an error message regarding something about cannot locale en-US.UTF8 after an update and reboot today.
    I got rid of the error message by uncommenting:
    en_US.UTF-8 UTF-8 
    en_US ISO-8859-1 
    in
    /etc/locale.gen
    Prior to fix:
    $ locale
    locale: Cannot set LC_CTYPE to default locale: No such file or directory
    locale: Cannot set LC_ALL to default locale: No such file or directory
    After fix:
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES=C
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    Didn't have time to check into this issue in much detail and would appreciate any additional info.

    Additional info?
    glibc has been upgraded today. You probably haven't merged the pacnew files.

  • Error message on 'Today' CRM Page

    Has anyone had this error message?
    Version 2007.1.652.2
    Message NPCode Value [E] or CodeType [eventtype] does not exist.
    Source NetPoint.API
    Stack at netpoint.api.common.NPCode.getCodeName(String CodeValue, String CodeType, String encoding, String connString)
    at netpoint.dashboard.Today.CalendarCtrl_ItemDataBound(Object sender, CalendarItemEventArgs e)
    at Mediachase.Web.UI.WebControls.Calendar.OnItemDataBound(CalendarItemEventArgs e)
    at Mediachase.Web.UI.WebControls.Calendar.CreateItem(Int32 itemIndex, Boolean dataBind, Object dataItem)
    at Mediachase.Web.UI.WebControls.Calendar.CreateControlHierarchy(Boolean useDataSource)
    at Mediachase.Web.UI.WebControls.Calendar.OnDataBinding(EventArgs e)
    at Mediachase.Web.UI.WebControls.Calendar.DataBind()
    at netpoint.dashboard.Today.OnBubbleEvent(Object source, EventArgs args)
    at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args)
    at netpoint.dashboard.controls.DashboardTab.Page_Load(Object sender, EventArgs e)
    at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)
    at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)
    at System.Web.UI.Control.OnLoad(EventArgs e)
    at System.Web.UI.Control.LoadRecursive()
    at System.Web.UI.Control.LoadRecursive()
    at System.Web.UI.Control.LoadRecursive()
    at System.Web.UI.Control.LoadRecursive()
    at System.Web.UI.Control.LoadRecursi

    You need to add the event type code, somehow it was deleted in your web tools instance.
    Go to Admin - Definitions - Code Definitions - enter eventtype for the type, C for the value, 2 for the sort and Call for the name. Then save the row, then do the rest as below.
    Type, Code, Sort, Name
    eventtype      A      3      Meeting                     
    eventtype      N      5      Note                     
    eventtype      T      6      Task

  • Strange error messages being logged.

    Hi, my first post!
    Not sure if this is the right place to ask this, but i'm getting a strange issue ever time I run Adobe Muse.
    I have a fully paid up subscription, and the program runs fine, but every time I run it, two files appear in my documents folder, Muselog.txt and MuseLogPrefs.xml.
    The MuseLog file contains several identical error mesages, timestamped a few seconds apart.
    They are all the same and say -
    "Build 6: Oct 5 2012 0:22:48.046: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)".
    This is then repeated twice more, with a later timestamp.
    Anyone any idea why this is happening?
    As I said, the program seems to be working fine, but what's this about a serial number, i've never had one!
    And why is it logging an error all the time that "may not be an error", every time I run the program!
    Any suggestions gratefully received.
    Cheers, Dave.

    Thanks Sachin!
    I did wonder if it might be checking for something that's not actually relevant to my installation of Muse.
    I did activate Muse online, and it seems to be happy that I have a valid subscription, so I guess it doesn't matter.
    Adobe should address this though, as it makes it look as if something in wrong with the validation of the program.
    Cheers, Dave.

  • Strange error message - linked lists (again)

    I have to keep at this linked list thing if I'm ever going to really understand it!!
    I have created a method to create a linked list via user input. I'm receiving only one strange ERROR, which states:
    "This method must return a result of of type ListADT.Node."
    And I have just started building my class ListADT...
    class ListADT{
    public Node createList(int aNumber){     // THIS IS WHERE THE ERROR POINTS
          * integer variable aNumber is the length of the list user wishes to create.
         Scanner console = new Scanner(System.in);
         int number;                    // declare variable number as an integer.
         Node newNode = new Node();          // declare and initialize newNode.
         Node first = new Node();          // declare and initialize first.
         Node last = new Node();               // delcare and initizlize last.
         try
              for(int i = 0; i <= aNumber; i++){               // for loop to enter numbers to build list.
              System.out.println("Please enter an integer: ");     // prompt user.
              number = console.nextInt();                    // assign user input to variable number.
              newNode.info = number;          // assign number to newNode;
              if(first == null){               // checks to see if Node first is a null value.
                   first = newNode;          // if true, then this node is the first and last node in the list.
                   last = newNode;
              else{                              // if first is not null, then newNode is placed at the end of the list.
                   last.link = newNode;
                   last = newNode;
              return first;
         catch (InputMismatchException imeRef)     //Catches non-integer values
              System.out.println("You entered a non-Integer! " + imeRef.toString());     //Prints error message

    Now why can't the error messages help
    out a little more? I would have never guessed that
    there was a problem with the catch block not
    returning anything!!The message was pretty informative -- it told you what was wrong. If the compiler could be so smart as to be able to tell you exactly what to fix, then the compiler would be able to write code all by itself -- and then you'd be out of a job.

  • Strange error message getting displayed

    Hi All,
    We are facing a strange problem when we type in the following URL http://<host>:<port>/irj/blah.jsp
    The error message says that the file blah.jsp does not exist and then gives the complete directory structure for e.g. c:\usr\sap\<instance name>\JC<Instance Number>\.....irj\.....\blah.jsp does not exist.
    We want to prevent this directory structure from getting displayed and display a generic error message.
    Please let us know how this will be possible.
    Regards
    Sidharth
    Message was edited by: Sidharth Deshpande

    Hi,
    If you want to display your error message you must add in "apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\web.xml" file the following tags:
    <error-page>
    <error-code>404</error-code>
    <location>/my_error_page.jsp</location>
    </error-page>
    Now when error code 404 occurs then this my_error_page.jsp will be displayed instead of default error page.
    In my_error_page.jsp you may process the errors as you want.
    Best Regards,
    Violeta Georgieva
    Message was edited by: Violeta Georgieva

  • WRT54G- Won't accept my new modem and I keep getting a strange error message

    On Christmas night, my modem crapped out forcing me to purchase a new one the next day. After getting it online, I attempted to hook up my router. However, I could not connect to the internet through it. I figured it must be because the IP address must have been changed and it needs to be reconfigured.
    So, I tried completely re-installing the router but I still could not connect to the internet. When I went on the web browser based page for the router to try to configure it, I got an error message stating that another PC on the network has the IP address. I did have a second PC hooked up to the router at the time; I unhooked it and tried to at least get the router to configure to one of the PCs.
    Yet, again, I was getting an error message saying: "May be route already exists".
    Because of this, I cannot register the new IP address and still cannot connect to the internet through my router. Anyone know what I need to do?

    Who is your Internet Service Providor? Do you have a static IP Address provided by your ISP?

Maybe you are looking for