Strange error or not? (ORA-01653 and APO Interface)

Hi Gurus,
I'm facing some strange problems in our BW-System. Last weekend we got some error messages: "ORA-01653: unable to extend table " This happend during loading. No problem, basis team worked fine and data loading ist going well again.
Now comes the strange stuff: Every Cube that had problems last weekend has a request with status "red" called "Request loaded using the APO interface without monitor log". The Request date is in some cases 14 days in the past.
What is this about? Basis team doesn't knows, so my coleagues. I learned SEM/BPS data is loaded this way, but our expert says he never dealt with the affected cubes.
Best regards,
Leo

That's what the basis team did and that work fine. The problems were the red APO-requests. We had another problem last weekens. A source system was shut down and our communications user was deleted because. This system should be taken out of our BW, but the processes were still running. I guess that's the reason. I cut all connections to this system and now everythin is fine.

Similar Messages

We would like an request with error is not imported over and over again.

We have an periodically sheduled job which imports all released requests(queue). We would like that request with error is not imported over and over again.
How to achieve that?

Hi,
Please do run the import job for transport in STMS only as described in SAP Note below:
https://service.sap.com/sap/support/notes/398589
The periodic sadly can only be done for "import all" & not "import single".
However, you can try the following unconditional modes:
http://help.sap.com/saphelp_nw70/helpdata/EN/3d/ad5b814ebc11d182bf0000e829fbfe/frameset.htm
- Regards, Dibya

Hello I have a mac book pro (lap top) and it's version is 10.6.8.i want to up grade it to 10.9.2. version .i downloaded version from apple store twice and it is un able to installing; give me error massage of installing.the error has not any number and it

Hello
I have a mac book pro (lap top) and it’s version is 10.6.8.i want to up grade it to 10.9.2. version .i downloaded version from apple store twice and it is un able to installing; give me error massage of installing.the error has not any number and it says :installation can not be complete with a red sign. please say the solution.also how i can get the 7.0.0. version up date from apple store . i searched very much but i did not find the version .

What MacBook Pro model do you have? Check the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware and then the Model Identifier...has to be at least MacBook Pro3,1 to install Mavericks.

ASA5550 port channel configuration ERROR: nameif not allowed on empty etherchannel interface

Hi All,
I am having problem when configure port channel on asa5550
IOS ver asa914-k8.bin also in ver 9.02   and 8.47.
Please let me know how can I solve this problem.
UK-LON-FW(config)# int port-channel 3
UK-LON-FW(config-if)# vlan 245
                       ^
ERROR: % Invalid input detected at '^' marker.
UK-LON-FW(config-if)# nameif secure
ERROR: nameif not allowed on empty etherchannel interface.
UK-LON-FW(config-if)#
here is my interfaces configuration:
interface GigabitEthernet0/0
description fw1:G0/0 to uk-lon-gw1:e1/8 fw2:G0/0 to uk-lon-gw2:e1/9 outside zone
channel-group 1 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/1
description fw1:G0/1 to uk-lon-gw2:e1/8 fw2:G0/1 to uk-lon-gw1:e1/9 outside zone
channel-group 1 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
description fw1:G0/2 to uk-lon-sw1a:1 fw2:G0/2 to uk-lon-sw1a:2 dmz
channel-group 2 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
description fw1:G0/3 to uk-lon-sw1b: fw2:G0/3 to uk-lon-sw1b:2 dmz
channel-group 2 mode on
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 0
ip address 10.10.51.18 255.255.254.0
interface GigabitEthernet1/0
description fw1:G1/0 to uk-lon-sw1a:3 fw2:G1/0 to uk-lon-sw1a:4 secure zone
no nameif
no security-level
no ip address
interface GigabitEthernet1/1
description fw1:G1/1 to uk-lon-sw1b:3 fw2:G1/1 to uk-lon-sw1b:4 secure zone
no nameif
no security-level
no ip address
interface GigabitEthernet1/2
description LAN Failover Interface
no nameif
no security-level
no ip address
interface GigabitEthernet1/3
description STATE Failover Interface
no nameif
no security-level
no ip address
interface Port-channel1
description outside zone
no nameif
no security-level
no ip address
interface Port-channel1.5
description outside zone Bundle FW:G0/0-G0/1 connect to GW1:e1/8-GW2:e1/8
vlan 5
nameif outside
security-level 0
ip address 216.239.105.5 255.255.255.128 standby 216.239.105.6
interface Port-channel2
description dmz Bunlde uk-lon-fw:G0/2-3 to sw1a:1-2 sw1b:1-2
no nameif
no security-level
no ip address
interface Port-channel2.105
description dmz
vlan 105
nameif dmz
security-level 50
ip address 216.239.105.193 255.255.255.192 standby 216.239.105.194
interface Port-channel3
description secure zone Bunlde uk-lon-fw:G1/0-1 to sw1a:3-3 sw1b:3-4
no nameif
security-level 100
ip address 10.254.105.1 255.255.255.0 standby 10.254.105.2
UK-LON-FW(config-if)#

Hi Marvin,
Thank you for your answer. I did everything but it did not work. Turn out it is a bug ver 8.45 will let you created the sub logical interface but actually it did not work right. Verson 9.x doesn't let you create more than 2 port channel (limitation of ASA5550 hardware).
https://tools.cisco.com/bugsearch/bug/CSCtq62715/?reffering_site=dumpcr
Also, you can see the 8.4 release notes were you can see that it is not supported:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/release/notes/asarn84.html#pgfId-522232
Interface Features
EtherChannel support (ASA 5510 and higher)
You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.
Note You cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM in slot 1 on the ASA 5550, as part of an EtherChannel.
We introduced the following commands: channel-group , lacp port-priority , interface port-channel , lacp max-bundle , port-channel min-bundle , port-channel load-balance , lacp system-priority , clear lacp counters , show lacp , show port-channel .

Strange error in /var/log/messages and /var/log/warn

Hi,
I get following error continuosly:
kernel: sg_write: data in/out 404/404 bytes for SCSI command 0xd--guessing data in;
kernel: program java not setting count and/or reply_len properly
Any idea?
Ty
Bye

Hi,
#h1:35:respawn:/etc/init.d/init.cssd run >/dev/null 2>&1 </dev/null
by commenting above line in initttab file would stop messaging, is this would have any adverse affect on the database. As its a production server, so i am really taking time to resolve it. Your suggestions are welcome. If there is no harm in commenting the above line then i would go forward to comment that line.
Thanks
Jafar>

After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------S

Your USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/

Log Reader Agent error "could not execute sp_replcmds' and causes stack dump

Publisher/Subscriber db: SQL 2008 R2, 2000 compatability mode
Distributor database is on separate server.
(note: There is another database on this instance that is running replication without error, it is not in compatibility mode)
After snapshot agent finishes, the log reader agent starts and fails immediately with this error in the Agent Job.
Then I get a SEV20 error and stack dump in the error logs.
Date  6/12/2014 3:12:26 PM
Log  Job History (SERVER\INSTANCE-DBNAME-43)
Step ID  2
Server  ######RT02
Job Name  SERVER\INSTANCE-DBNAME-43
Step Name  Run agent.
Duration  00:00:01
Sql Severity  0
Sql Message ID  0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted  0
Message
2014-06-12 20:12:26.302 Copyright (c) 2008 Microsoft Corporation
2014-06-12 20:12:26.302 Microsoft SQL Server Replication Agent: logread
2014-06-12 20:12:26.302
2014-06-12 20:12:26.302 The timestamps prepended to the output lines are expressed in terms of UTC time.
2014-06-12 20:12:26.302 User-specified agent parameter values:
   -Publisher SERVER\INSTANCE
   -PublisherDB DBNAME
   -Distributor ######RT02
   -DistributorSecurityMode 1
   -Continuous
   -XJOBID 0x8958DF32810C6849B28A037A8FF8DD92
   -XJOBNAME SERVER\INSTANCE-DBNAME-43
   -XSTEPID 2
   -XSUBSYSTEM LogReader
   -XSERVER SERVER\INSTANCE
   -XCMDLINE 0
   -XCancelEventHandle 0000000000000F98
   -XParentProcessHandle 0000000000000F34
2014-06-12 20:12:26.459 Parameter values obtained from agent profile:
   -pollinginterval 5000
   -historyverboselevel 1
   -logintimeout 15
   -querytimeout 1800
   -readbatchsize 500
   -readbatchsize 500000
2014-06-12 20:12:26.493 Status: 4096, code: 20024, text: 'Initializing'.
2014-06-12 20:12:26.493 The agent is running. Use Replication Monitor to view the details of this agent session.
2014-06-12 20:12:27.885 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
2014-06-12 20:12:27.886 The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.
2014-06-12 20:12:27.886 Status: 0, code: 21, text: 'Warning: Fatal error 3624 occurred at Jun 12 2014 3:12PM. Note the error and time, and contact your system administrator.'.
2014-06-12 20:12:27.886 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
I've tried removing replication and setting it back up again, restarting SQL, and restarting the server itself.
Let me know if you need any more information to help troubleshoot. Thanks.
Please help, thanks.

Hi,
Enable Verbose logging and check the results.
Execute following commands: -Output C:\Temp\OUTPUTFILE.txt –Outputverboselevel 2.
Please refer following KB article for your reference -
http://support.microsoft.com/kb/q312292/
Thanks.
Tracy Cai
TechNet Community Support

Strange Error, could not resolve, please help

Does any body know why would one get this error
Error: File C:\GenevaSqlj\src\com\wellmanage\csm\handler\OnlineHandler.java does not contain type OnlineHandler as expected. Please adjust the class path so that the file does not appear in the unnamed package.

The OnlineHandler.java file should have:
package com.wellmanage.csm.handler;
as the first line... as it looks to be in that package.

TS1424 i keep getting error message not enough privileges and also error -1201 can someone please help

i keep getting you do not have enough privileges when opening itunes as well as error 1201 can someone please help?

See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417

I was updating my iphone4 and it got to the end and said error could not update and now my phone is frozen on the apple start screen???

I was udating my iphone 4 software on itunes, it got all the way to the end, my phone switched off then it said error could not download software and now my phone is frozen on the start screen????

Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

ORA-1652 during insert , should be ORA-01653 ?

Developer provided me with log where :
ORA-01652: unable to extend temp segment by 64 in tablespace TBS
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO TABLE.... VALUES(?,?,?)table is empty tbs is 30 GB free .
insert is using values (so no insert from select) .
I did some tests and in my opinion the ora errors should be:
ORA-01653: unable to extend table by 8 in tablespace T1
DB is RAC 10.2.0.3 on Linux 64bit.
Please clarify that for me .
Regards.
Greg

Hi,
you say, you get 30Go of freespace in your TBS
do you have alot of delete insert in objects tables?
if it's right. Do you use the move objets to reoganize table in your tablespace
with this script you can see free space unusable and try to use DEALLOCATE UNSED
set serveroutput on
declare
TOTAL_BLOCKS number;
TOTAL_BYTES number;
UNUSED_BLOCKS number;
UNUSED_BYTES number;
LAST_USED_EXTENT_FILE_ID number;
LAST_USED_EXTENT_BLOCK_ID number;
LAST_USED_BLOCK number;
begin
dbms_space.unused_space('<SCHEMA>','<TABLE>',
TOTAL_BLOCKS, TOTAL_BYTES, UNUSED_BLOCKS, UNUSED_BYTES,
LAST_USED_EXTENT_FILE_ID, LAST_USED_EXTENT_BLOCK_ID,
LAST_USED_BLOCK);
dbms_output.put_line('OBJECT_NAME = EMP');
dbms_output.put_line('-----------------------------------');
dbms_output.put_line('TOTAL_BLOCKS = '||TOTAL_BLOCKS);
dbms_output.put_line('TOTAL_BYTES = '||TOTAL_BYTES);
dbms_output.put_line('UNUSED_BLOCKS = '||UNUSED_BLOCKS);
dbms_output.put_line('UNUSED BYTES = '||UNUSED_BYTES);
dbms_output.put_line('LAST_USED_EXTENT_FILE_ID = '||LAST_USED_EXTENT_FILE_ID);
dbms_output.put_line('LAST_USED_EXTENT_BLOCK_ID = '||LAST_USED_EXTENT_BLOCK_ID);
dbms_output.put_line('LAST_USED_BLOCK = '||LAST_USED_BLOCK);
end;
if partition table are concerned
set serveroutput on
declare
TOTAL_BLOCKS number;
TOTAL_BYTES number;
UNUSED_BLOCKS number;
UNUSED_BYTES number;
LAST_USED_EXTENT_FILE_ID number;
LAST_USED_EXTENT_BLOCK_ID number;
LAST_USED_BLOCK number;
begin
dbms_space.unused_space('<SCHEMA>','<TABLE>','TABLE PARTITION',
TOTAL_BLOCKS, TOTAL_BYTES, UNUSED_BLOCKS, UNUSED_BYTES,
LAST_USED_EXTENT_FILE_ID, LAST_USED_EXTENT_BLOCK_ID,
LAST_USED_BLOCK,'<Partition_Name>');
dbms_output.put_line('OBJECT_NAME = EMP');
dbms_output.put_line('-----------------------------------');
dbms_output.put_line('TOTAL_BLOCKS = '||TOTAL_BLOCKS);
dbms_output.put_line('TOTAL_BYTES = '||TOTAL_BYTES);
dbms_output.put_line('UNUSED_BLOCKS = '||UNUSED_BLOCKS);
dbms_output.put_line('UNUSED BYTES = '||UNUSED_BYTES);
dbms_output.put_line('LAST_USED_EXTENT_FILE_ID = '||LAST_USED_EXTENT_FILE_ID);
dbms_output.put_line('LAST_USED_EXTENT_BLOCK_ID = '||LAST_USED_EXTENT_BLOCK_ID);
dbms_output.put_line('LAST_USED_BLOCK = '||LAST_USED_BLOCK);
end;
Regard's

ORA-01653 unable to extend table.

Hi All,
I am Using oracle 9i on Windows XP box
I got the following error messages .
ORA-01653: unable to extend table SCOTT.EMP2 by 128 in tablespace ORADATA
I was inserting 557056 rows from emp table to emp2 table , by issuing
sql> insert into emp2 select * from emp ;
My emp2 table is in tablespace oradata which I created by issuing.
create tablespace oradata
datafile 'c:\oratemp\data01.dbf' size 20m
extent management local
autoallocate
segment space management auto
Please help me to explain why I got this error and how to solve this error.
Thanks.

Your ORADATA tablespace got filled, ang got no free space to accommodate new insertions.
So, resize the datafile of ORADATA tablespace using the following statement.
SQL> CONNECT /AS SYSDBA
SQL> ALTER DATABASE DATAFILE 'c:\oratemp\data01.dbf' RESIZE 100M;
Regards,
Sabdar Syed.

Fusion-icon error: glxinfo not installed. [SOLVED]

Hi, I am running gnome at the moment and I am trying to get compiz and emerald started. I type into the terminal:
[semperfiguy: ~]$ fusion-icon
* Detected Session: gnome
* execution of "which glxinfo" failed
* Error: glxinfo not installed!
And I get that error. Now when I run glxinfo from the it spits out a whole bunch of stuff. So it is obviously installed correct? So why is it giving me this problem?
Last edited by semperfiguy (2008-06-17 15:20:04)

This is what I get:
[semperfiguy: ~]$ which glxinfo
bash: which: command not found
Installed "which" and it works fine.. thank you!

Preferences Error - Could not load Network

My dad just bought me a (used)) iBook g4 to replace my old one. It's running 10.3.9. It didn't come with a wireless card, so I ordered an Airport Extreme and installed it. I'm pretty sure I installed it correctly, I heard all the right clicks.
It booted up afterwards and the first thing I did was to run system update and try to get everything up to date. There were a ton. After it restarted, it no longer was connecting to our wirelesss network. I tried to go to System Preferences > Network and it responds with the error message "Preferences Error - Could Not Load Network" and nothing opens. Not to mention my DVD Player no longer works!
I have no idea what's at fault here- the airport extreme card, a bad update... And no idea how to fix it! Any help would be appreciated!

That it is not recognizing the retail (thanks cornelius) Leopard DVD is a problem indeed.
It should be plugged into the mains power, as the CD/DVD drive uses a lot of power when it is spinning.
Back to your About this Mac, does it mention that your optical drive can read DVDs?
On mine this info is located down the list under ATA which will have mentioned, CD
and in detail in the lower window
eg. Drive type: CD - RW/ DVD - ROM
if it shows the DVD-ROM part, that indicates it can read DVDs.
If it should be able to, then I wonder if the iBook's optical drive is OK. I could suggest loading another DVD into it, but you say DVD Player.app is missing.
What you could try is buying from a computer shop a CD drive cleaning kit, and following the instructions, run that through it. That is a fairy inexpensive exercise.
If it still does not recognize the DVD, and you had another Mac that you could connect by Firewire Target Disk mode, you could try installing leopard on it that way. But before that rather complex arrangement, try the disk cleaner. It might be a quick fix.

ORA-01653 error while executing a select query over DBLINK

Hi,
We have a query that is running to extract some data from a remote DB over DBLINK.
The query is failing by throwing the error "ORA-01653 -- Unable to extend.........".
Is this a problem with the "temp" tablespace of local database or is this with the "temp" tablespace of remote DB.
As far as my knowledge goes, I guess any statement , selecting data over dblink where the query is being fired actually in remote db over dblink uses the temp tablespace of that DB only and hence the problem should be with the temp tablespace of remote db only but I am not very sure about this.
Is there any chance that it can be problem with "temp" tablespace of local DB from where the query is being fired over dblink.
It would be really helpful if anyone can throw some light on this.
Thanks

The error stack will normally tell you if the exception is raised in the remote database.
You might try using the driving_site hint (see performance guide) to push work to the remote site or pull it local. It all depends on your particular query and explain plan.
Remember to use { code } (without the embedded spaces) tags to frame your code and explain plan so it remains formatted, if you post it here.

Strange error or not? (ORA-01653 and APO Interface)

Similar Messages

Maybe you are looking for