Strange error when releasing CR to QA

In CHARM, I try to release a tp CR to QA. The steps are as follows:
go txn crm_dno_monitor
double click the CR that should be released to the QA
select the action "pass correction to test"
Then it fails with message as follows:
Action Release Transport Request in system AZS 801 of type Source Systems has been cancelled
Message no. CHM1_ACTION_LOG065
Diagnosis
Action cancelled because of error.
System Response
Action is cancelled. Transaction status error.
Procedure
The error messages are retained for further analysis until the next transaction check.
Procedure for System Administration
Analyze other messages in the application log of the task list of the transaction.
I did not have this error before.
I find 2 SDN threads with the same error:
1) SP 18: Unable to import in QAS system
   However after apply the said note, the error is still there;
2) Re: Transport Request is not getting released by Change Requests
   However we do not have any inactive objects in SE80.
Please share yout experience. Thanks a lot!

Hi
Refer to below mentioend note : 1239726.
Hope it helps.
Cheers
Deepanshu

Similar Messages

  • Strange Error when previewing or publishing

    Hi Muse Family
    I am getting a very strange error when I publish to BC or when I go to preview in browser:
    "Adobe Muse has encountered an error.. blah blah"
    and then a very confusing:
    "There should not be such ID exists in the mapping"
    It forces Muse to close.
    I can't think of any significant step I took to cause this problem from when it was working.

    To enable the frequent release of new features within Muse, the team is always simultaneously working on many different improvements only some of which are completed and exposed in any given release. In the 2014.1 update some of the underlying code related to SVG support was unintentionally enabled. When copying and pasting from some versions of Adobe Illustrator (and other sources) the result may be an SVG vector graphic in Muse, rather than an image. While the SVG may appear to work in Design view, it can cause failures when exporting or publishing from Muse. This functionality will be disabled in an imminent dot release, 2014.1.1. We advise users to remove SVG content from their sites. Until 2014.1.1 is available, the graphics will need to be brought into Muse as .png, .jpg, .gif or .psd images using File > Place or Import, rather than Copy/Paste.
    Sorry for the inconvenience. SVG support will be fully implemented, tested and included in a future major update of Muse.
    Additional discussion in this thread <Re: I can paste vectors in muse now, it shows up in preview, and even in a browser preview, but not when I upload.>.

  • Error when releasing a transport

    Hello experts,
    I am getting an error when releasing a transport. The error message is telling me that
    Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive'   
    The detailed error message isnt very helpful. The performance assistant gives the error message RSO 407.
    I found another thread,  scn.sap.com/thread/3428031
    The answer in this thread appears to be very close to a solution for me, I just need a little more information I think. As it says, I have looked in the table RSTRAN for the transformation that this DTP processes. There are three rows, with a different OBJVERS. A and M are both set to ACT, but OBJVERS = D is set to OBJSTAT = INA.
    I suspect that this is the problem with the releasing of my transport. Do you agree?
    If so, how do I go about getting this activated?
    Many thanks.

    Hi Simon,
    The D version will be always inactive as it indicate SAP Delivered version of the transformation.
    I will suggest just have a look at any existing transformation, you will find same status i.e D version INA also check last change it will be SAP also under content column you will find info for D version.
    I still say, just go ahead and release your transport by ignoring the message, it should work. You are all set to move your transport.
    Rest upto you.
    I have tried releasing transport by ignoring messages many times.....and worked all time
    Thank-You.
    Regards,
    VB

  • Error when releasing billing to Accounting

    Hi All,
    I get the following error when releasing the billing to accounting in T-code VFX3....
    Tax code   in procedure TAXSL is invalid
    Message no. FICORE704
    Diagnosis
    The tax code entered is not defined in the country for this company code.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
    2. Create a new tax code if required
    Pls note that in the error message it does not mention a particular tax code which is invalid, it jus shows tax code   in procedure TAXSL is invalid.
    I have done the following customization both in FI and SD.
    I have maintained condition record MWST both in FI and SD. Maintained all necessary tax codes in FTXP.
    Note that in the billing, we enter the condition type MWST in the Header Level and enter the relevant percentage manually. According to my understanding since the condition is maintained at header level there is no need of maintaining condition records through T-Code VK11.Therefore the tax code is not picked from the condition record as its not maintained in the item level.
    Pls advice me on how to overcome this error ASAP since its critical.
    Thanks in Advance,
    Maleeq

    Hi,
    Yes I have maintained tax codes in FTXP. but the error message shows that "tax code __ is missing in tax procedure TAXSL". To my knowledge it is not possible to create a tax code "blank"!!!!
    I have not maintained condition records in VK11 as we maintain the MWST condition in the Header level. Condition records are picked only from ITEM level and NOT from HEADER level.
    Maleeq

  • Strange error when Bootcamp attempts to create partition for Windows

    I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
    *The disk cannot be partitioned because some files cannot be moved.*
    Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
    My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

    Hi,
    this gets asked at least a thousand times by now.
    Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
    Regards
    Stefan

  • I have a strange error when I close  a combobox:

    I have a strange error when I close a combobox:
    <mx:ComboBox
    id="currencyComboBox"
    prompt="Select Currency" dropdownStyleName="dropdown"
    labelField="currencyName"
    >
    <mx:close>
    <![CDATA[
    selectedItem = ComboBox(event.target).selectedItem;
    calculateCustomerData();
    ]]>
    </mx:close>
    <mx:change>
    <![CDATA[
    selectedItem = ComboBox(event.target).selectedItem;
    calculateCustomerData();
    ]]>
    </mx:change>
    </mx:ComboBox>
    RangeError: Index '7' specified is out of bounds.
    at
    mx.collections::ListCollectionView/getItemAt()[E:\dev\3.0.x\frameworks\projects\framework \src\mx\collections\ListCollectionView.as:422]
    This only occurs when its dataprovider is from a result event
    rather than its dataprovider from a predifined arraycollection.
    private function handleGetBanks(event:ResultEvent):void{
    bankResult = new ArrayCollection((event.result as
    ArrayCollection).source);
    currencyComboBox.dataProvider = event.result as
    ArrayCollection;
    rather than using the following as a dataprovider:
    <mx:ArrayCollection id="currencies">
    <mx:Object label="AED" />
    <mx:Object label="AUD" />
    <mx:Object label="CAD" />
    <mx:Object label="EUR" />
    <mx:Object label="NZD" />
    <mx:Object label="USD" />
    <mx:Object label="ZAR" />
    </mx:ArrayCollection>
    Can anyone see what the problem might be?

    Sorry my mistake, the change event was being called before
    the close event. Then I could debug and find the problem

  • Strange error when trying to validate a business rule

    I get this strange error when I try to validate a business rule:
    Detail:Cannot calculate. Essbase Error(1200369): Error optimizing formula for [69972] (line 38): can not cross members from the same dimension
    The rule is:
    FIX (@RELATIVE("SG&A", 0))
    "69972" = (("60001" -> "C1130" -> "All Projects" -> "All Employees") + ("69971" -> "C1130" -> "All Projects" -> "All Employees")) * "SG&A % of C1130" -> "No Cost Center" -> "PNULL" -> "No Employee" * (("Headcount" -> "All Projects" -> "All Employees") - ("C1130"->"Headcount" -> "All Projects" -> "All Employees")) / (("Headcount" -> "SG&A" -> "All Projects" -> "All Employees") - ( "C1130"->"Headcount" -> "SG&A" -> "All Projects" -> "All Employees")) ;
    ENDFIX

    Error msg states that you have used crossdim operator with the member of same dim. Cross check again.
    EX:
    "C1130"->"Headcount" -> "SG&A" -> "All Projects" -> "All Employees"
    Are all of these members belong to different dimesions?

  • A strange error when starting up Oracle database

    When I was starting up an Oracle DB instance on HP-UX B.11.23 U ia64 host, a strange error message was encountered as follows:
    ======================================================
    SQL*Plus: Release 9.2.0.8.0 - Production on Sat Sep 1 21:50:05 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORACLE instance started.
    Total System Global Area 320290568 bytes
    Fixed Size 724744 bytes
    Variable Size 285212672 bytes
    Database Buffers 33554432 bytes
    Redo Buffers 798720 bytes
    Database mounted.
    ORA-01122: database file 11 failed verification check
    ORA-01110: data file 11: '/u01/CADDB/data/cwmlite01.dbf'
    ORA-01251: Unknown File Header Version read for file number 11
    SQL> Disconnected from Oracle9i Release 9.2.0.8.0 - 64bit Production
    JServer Release 9.2.0.8.0 - Production
    Database "GPRS" warm started.
    ======================================================
    To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB". Who can tell me why that? What is the purpose of the tablespace CWMLITE in a DB?

    Hm, what does this have to do with "Community Feedback and Suggestions"?
    Please move your post to a more apropriate forum such as General Database Discussions

  • Meet with a strange error when starting up an Oracle DB instance

    When I was starting up an Oracle DB instance on HP-UX B.11.23 U ia64 host, a strange error message was encountered as follows:
    ======================================================
    SQL*Plus: Release 9.2.0.8.0 - Production on Sat Sep 1 21:50:05 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORACLE instance started.
    Total System Global Area 320290568 bytes
    Fixed Size 724744 bytes
    Variable Size 285212672 bytes
    Database Buffers 33554432 bytes
    Redo Buffers 798720 bytes
    Database mounted.
    ORA-01122: database file 11 failed verification check
    ORA-01110: data file 11: '/u01/CADDB/data/cwmlite01.dbf'
    ORA-01251: Unknown File Header Version read for file number 11
    SQL> Disconnected from Oracle9i Release 9.2.0.8.0 - 64bit Production
    JServer Release 9.2.0.8.0 - Production
    Database "GPRS" warm started.
    ======================================================
    To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB". Who can tell me why that? What is the purpose of the tablespace CWMLITE in a DB?

    What I know is that CWMLITE is to do with OLAP. This tablespace is used to store OLAPSYS schema.
    <<To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB">>
    If the file doesn't belong to your database then it could be that you are using a wrong controlfile.

  • Error when releasing Transports in ChaRM

    Good Day;
    When releasing a transport thru ChaRM I get the following error
    "Release of system could not be determined. The error message is "/TMWFLOW/CRIT_OBJ061"
    Any ideas?
    Thanks
    Don

    Good Day Farzan;
    We have the following systems
    Solution Manager      (Netweaver)
    Development System (Client 100 SAP 4.7)
    Quality System      (Client 100 SAP 4.7)
    Production System      (Client 100 SAP 4.7)      
    Regards
    Don

  • Error when releasing a transportation order

    Good morning.
    I am trying to release a transportation order that contains a nonstandard table which has been added two fields, and the corresponding data elements and dominions of the new fields.
    When releasing the order, dumps an error and cancels the export.
    The status of the order now is "Initiated liberation".
    The error code is:
    "Error SQL 932 when accesing SPROXDAT: ORA-00932: inconsistent datatypes: expected %s got." And makes reference to data elements, but i think they are OK.
    Please,  ¿someone can help me?
    Thanks a lot.
    Regards.

    well the problem is very likeley that the table has enhancement options which allow only character and NUMC append fields.
    you most probably violated those preferences.

  • Error when releasing the WS using the transaction WSCONFIG

    Hello Colleagues,
    Following error message is recieved when i try to release the webservice using the transaction WSCONFIG.
    Error when creating Web service (Method call of IF_SRT_REGISTRY_ENTRY~CREATE_NEW failed; the class  does not exist)
    Can you please let me know if anyone of you have faced the similar error and have been successful in solving.
    Thanks & Best regards,
    Ajay

    Hi Ajay,
    Check if the thread below resolves your issue:
    [Re: web service - How activate host ?;
    Regards, Trevor

  • Error when release account plan via CRM_ACC_PL

    Hi expert,
    Getting error 'Overlapping validity periods for two condition records' when release account plan via CRM_ACC_PL.
    Any idea what caused this error?
    Cheers.

    Hello,
    could you please check notes 1311405, 1067232, 1044090, 1041830.
    Hopefully they can help.
    Regards,
    Gerhard

  • Strange error when adding book on another book (LibraryEntitlementHelper?!)

    Hi,
    when I try to add book to another book with PortalCustomizationManager I get this strange error:
    java.lang.IllegalArgumentException: Argument [webAppName] to method [createResource] in class [com.bea.netuix.application.manager.entitlement
    s.LibraryEntitlementHelper] cannot have error/be [null].
    What the hell is LibraryEntitlementHelper and why google, bea edocs and bea portal javadoc knows nothing about it?

    How did you create the CustomizationContext when calling the method on the EJB.
    you need to make sure you pass in the ServletRequest. If you are calling this from outside a web container. you wil need to use a mock request or take a look at ExportImportManager.
    Chris Jolley
    Portal Architect

  • SO I am getting a strange error when trying to access the FIM Management Agents

    Hi Everyone,
    So I am getting a really odd error when I go to FIM --> Management Agents -->MOSS-guid ID right click on that and choose porperties, then Configure Connection Information, then I click OK and I get this pop up error "the type of 'pictureurl' string
    is not compatible with the type of 'sps_mv_octelstring_pictureurl'. I got here by noticing that in the error log there was an error that said:
    The management agent "MOSS-guid ID" failed on run profile "MOSS_EXPORT_Guid ID" because the server encountered errors.
    when I searched on that error, it lead me to a ton of blogs that said to do the following:go to FIM --> Management Agents -->MOSS-guid ID right click on that and choose porperties, then Configure Connection Information at the bottom of the page there
    is a Connect To field and every blog I read said to change it to direct:{Domain}:{Port}. The thing is that my domain and port were fine, so that is when I clicked ok, and got that error message. Ever since this happened, my FIM has been broken, and I really
    can't figure out why???
    So I haven't done any updates to the server in at least a year, so nothing could be happening there.
    Any help at all with this would be taken with the greatest appreciation.
    Best regards, Mike

    What you're doing is unsupported. You need to manipulate the MAs via Central Admin -> Manage Service Applications, find your UPA SA and manage it. You can then Manage User Properties and make changes to the Picture property from here.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for