Strange Exchange name when connecting with Outlook 2013 to Exchange server 2013 SP1
I've setup a test environment with Windows Server standard 2012 R2 and Exchange Server 2013 SP1...
In- and outbound SMTP works fine, as well as connecting with OWA and Mac Outlook client...
Oddly though when setting up an Outlook 2013 connection....it recognizes the email address correctly, but later on can't connect and shows a dialog to enter the server and email account manually....though the profiled fields show something like:
Exchange Server: [email protected]
Mailbox: =SMTP:[email protected]
When I fill in the right fields....it won't connect and falls back to the values above...
Something wrong in the Exchange setup?
Hmm...found aguide here:
http://enterpriseit.co/microsoft-exchange/2013/ssl-certificate-request/
Though it doesn't mention anything that with the self-signed certs it won't allow Outlook 2013 to connect...
So from my point of view Outlook 2013 should be able to connect anyway...as during the connect process you can install the self-signed cert.....so must be something else then...
Similar Messages
-
Separator page prints out with wrong name when printing from Outlook 2010
Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5). iTunes used to open when connected with my Touch. Can anyone help me? Thankyou.
I have got a solution, it was shared on another 'apple support coummunity' board:
https://discussions.apple.com/message/15830348#15830348
It worked for me -
My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged -
I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?
Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When connecting with FaceTime, I see other people then they hang up.
When connecting with FaceTime, I see other people then they hang up. Has anyone one else encountered this?
Usually, my wife contacts me with facetime, I try to accept connection and she sees other people form another country that quickly hang up.
This happens often.
ThanksThis seems to happen with the Iphone 5s if I am not mistaken
Thnaks -
Can't open app store in itunes when connected with ipad
Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!
Welcome to the Apple Community.
Do you have the power cable in, it won't show up with the power cable in.
Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway. -
Why isn't my iPad2 charging its battery when connected with my iMac?
Why isn't my iPad2 charging its battery when connected with my iMac?
A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.
-
Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone. Help??
Turn off wifi. Use wireless signal. reenter password at settings. This should work. Turn wifi back on if you wish. Wait for next occurrence within hours or days. Have not found a permanent preventive solution. Thinking of replacing my four year old wireless router.
-
Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help
Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work! -
Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome. -
Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge
I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever, and I don't want to throw good money after bad anyway.
Thanks for your comments -
Will not recognize the Lucid LG when connected with USB
My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?
That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport -
Synchronize Palm IIIxe with Outlook on Microsoft Exchange
Hi,
(this is a duplicate, because I think my first post was on the wrong forum)
Our tech support suggested that only some Palm models wil synchronize with Outlook on Microsoft Exchange. Does anyone know if Palm IIIxe will allow for this?
thanks,
janine
Post relates to: Palm IIIeAre you asking for a wireless sync or a cable sync? If its a wireless sync to the exchange server, this device cannot do that. A cable sync you will need to outlook conduits from the CD. If you do that have the CD then you need pocket mirror from www.chapura.com
Post relates to: Treo 800w (Sprint) -
the resolution of my thunderbolt screen is not ok / sharp when connected with my air book. Who can help me out?
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.
Maybe you are looking for
-
hello all, turn database logging on , - FRA configured, what i have to do? 1) can i go mount status and alter database in archivelog mode and then start the database? or anything else like logging vs nologging, just confused
-
Save jpg into same location with appended filename and no dialog
Hi there, I've got thousands of images on a local server, all nested in a folder structure. For each image I need to open it, run an action to resize it, then save a jpg copy into the same folder it came from with an appended filename. I need to supr
-
hi Hussein; I hope u wont think i am dupm wiht this quesiton. I need to improve myself about this issue. I created one schema which hasnt anythink inside like table index etc. and i want to give all permisson(like create,drop,select ) to apps user. H
-
I am trying to create a user from my forms. Everything seems alright as no error is generated when I run the form, but the user is not created. below is the code I am calling from a when_button_press trigger. Can anyone tell me what I am doing wrong.
-
Adding ipod nano to computer with ipodmini and itunes already downloaded
My daughter just bought an ipodano. We already have ipod software and itunes downloaded from our purchase of the ipod mini. When we try to download the latest software that came with the ipodnano we get the message you must be an administrator. What