Strange file transfer prob
We have two Creative units, a Muvo and a Zen. Using the Creative Library software we can download (totally legal) music to the Zen but the Muvo gives error messages about insufficient information to transfer files. Some files have gone over easily and the Muvo appears to have plenty of spare space. Any ideas please?
Just today I got the following error:
"There is not enough disk space at the destination for this transfer."
I attempted to select all of the music files on my NOMAD to transfer to a new empty folder on my HDD. I used the options within MediaSource to create a new PC library. Then proceeded to initiate the transfer when the error message occurred.
If I select less than 300 hundred songs the transfer works, but selecting several thousand songs fails.
I have over 00Gb of space on the HDD when I was attempting to transfer all of my music from my NOMAD Zen Xtra 30Gb.
I use WinXP Professional with all known updates.
My HDD uses the NTFS file system.
I also use a RAID array comprised of two 250Gb Western Digital RAID edition Caviar SATA dri'ves.
I am using Creative MediaSource 3.30.2
My NOMAD Zen Xtra uses firmware .03.02
Similar Messages
-
Zen MicroPhoto connection problem/file transfer prob
My wife had a Zen MicroPhoto player that she used for audiobooks. About a month ago it started having "no device found" problems with the Media Explorer. She bought a new player, and it's no better. The Media Explorer will not install. I tried installing it separately, and the installation hangs, because it cannot find the player. She is using the Organizer now to transfer files, but she much prefers the Explorer. Many of the audiobook discs have the same file names (e.g., Track , Track 2, Track 3,....,etc.). When that happens, with the second and subsequent disks, she gets a message asking whether to replace or skip the duplicate files; the file names are the same, but the disks have different album names. Is there a workaround for this?
I thought Creative's customer support was bad, but this "discussion forum" sucks big time -- not a single reply. Thanks....
-
Strange file transfer problems after crash
Old computer crashed, bought new old computer saved old hard drive containing old installation of Itunes and used that drive on new computer in the same position as it was in old. Installed Itunes in the same directory as it was before crash. Most of my files, video, text, music all loaded and transformed just fine....except photos. When it started the sync it went part way through the process and then stopped with an error message that said: "This ipod (Ipod Touch) cannot sync because of an unknown error (-39).
As a result, two new photos that I was moving to a new directory are no longer there, sorta...the ipod touch now shows a black space where the two pics thumbnails in question were. One of them still comes up with the pic when you click on the black thumbnail but the other simply opens an all black screen.
I attempted to remove and re-install Itunes but the problem remained. I also attempted to remove all setup files, temp files etc. but still no luck. I tried removing ALL the photos and re-inserting in the affected category but the same warning and now ALL the thumbnails in that directory are black (but still show up in full size when you click on the thumbnail or click through the listing arrows the pics still show up (except the one totally black one). Not sure what to do at this point."This ipod (Ipod Touch) cannot sync because of an unknown error (-39).
That one can be caused by a damaged photo cache, Orion. If you delete your photo cache as per the following document:
[Photo Sync creates iPod photo Cache|http://support.apple.com/kb/TS1314]
... can you then get your photo syncs to work correctly? -
Remote Execute and File Transfer Error
Whenever we try to do a Remote Execute of File Transfer, we get an 1899
error. Here's the strange thing, we can RE and FT to desktops that are
still running the ZfD 4.x client. Seems to be only happening on the latest
(ZfD 6.5sp2). Any ideas? Also, remote control and remote view still work
w/o problem.Blewis,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Bluetooth file transfer fails after a second.
Strange issue. Can transfer a file from my C510 to my Ku990 Phone and then to the T400. However can not transfer files from my C510 to my T400. The transfer starts then after around a second shops saying it's failed. Have the drivers updated from win update and the latest firmware on my phone. Anyone had anything simiar or know what is wrong?
I'm afraid I can't help with finding the temporary file. I just did a BT File Transfer myself whilst monitoring my system but no new or modified files showed up.
However, Bluetooth really isn't designed for transferring gigabytes of data due to its very low transfer speeds.
If the computers are close enough for Bluetooth, you're far better off connecting an Ethernet or Firewire cable between the two and transferring that way. 6GB of data would transfer in a matter of minutes, rather than hours (or days) over Bluetooth. -
TC hangs during files transfer
Hello,
Brand new Time Capsule 2 TB. Everything works until I transfered files from my iMac to the TC. The TC hangs (during the file transfer) and needs to be reboot - not very easy, I tried maybe 20 times and then it worked - then it needs to be reconfigured.
I tried once again, transfering files (other files) from the Mac and the TC hangs again.
Strange, because I used my first TC (died last week, 18 months after I bought it) in the same way and I did transfer (in many months) lots of TB (maybe 5 to 10 GB a day) to the internal disk of the TC and to 3 externals drives (connected to the TC).
Is anyone suffering the same probleme?
Thanks for your time and best regards from sunny Switzerland
Message was edited by: Michel SchweizerI have exactly the same problem on both my MBA & iMac yet my Mac Mini works like a dream
Just purchased the 2TB TC & 27inch iMac
Have ensured all are using the new Airport Utility version that came with the TC
MBA running 10.6.1 hangs between 1.6 & 2.2 MB of transfer.
iMac running 10.6.2 hangs after 1.6 MB transfer.
Mac Mini running 10.6 completes albeit slower than I would like however only using g rather than n
Both MBA & iMac using n - after they hang I get a server connections interrupted error which you can choose ignore or disconnect all
Internet / Browsing works perfectly even when the file has hung and I have chosen disconnect all
A quick refresh of the Airport off and on brings back the TC to be able to expand the file structure again and I can then try again.
Called Apple support today - they put me on hold twice for up to 5 mins each time as need to check with advanced support, mobile dropped out and they didn't ring back like they promised - will try again tomorrow.
If I find a solution be sure to let you know.
Biggest concern from reading all these forums is once I get a stable file transfer I will have to deal with terribly slow speeds over wifi.
Not to mention the incredibly slow speeds when a usb flash is plugged directly in the back of the TC -
"Windows - No Disk" error message on file transfer
Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas AasToomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
UCMA 4 and back to backing a file transfer request
OK, I know that file transfer isn't technically supported on UCMA 4.0, but I wanted to take another look at it and see whether there was a way to b2b a file transfer request. After all, there's no reason that it shouldn't work if the messaging is correct,
right? The scenario I have is A <-b2b-> app <-b2b->B. I have an IM conversation going on between A and B, so now I'm trying to set it up so that A can send a file to B.
So far I've extended the platform to accept file transfer requests by creating my own call and factory classes, and then registering them using RegisterPlatformExtension. This means that when A sends a file, the INVITE gets delivered to my application.
Now I'm taking that INVITE and creating a new b2b call. A file transfer request looks something like this:
TL_INFO(TF_PROTOCOL) [0]16A8.4B28::02/10/2015-19:53:05.007.001d492f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3939761282] $$begin_record
Trace-Correlation-Id: 3939761282
Instance-Id: FDB3
Direction: incoming
Peer: 10.0.154.20:49282
Message-Type: request
Start-Line: INVITE sip:[email protected] SIP/2.0
From: <sip:[email protected]>;tag=eafd3e699d;epid=ccd5657cac
To: <sip:[email protected]>
Call-ID: 0acf0330423241258576d7c5cc42aa01
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:d2lIs-103l2YSpDwCSajtAAA;gruu>
Via: SIP/2.0/TLS 10.0.154.20:49282
Max-Forwards: 70
Content-Length: 1920
Content-Type: multipart/mixed;boundary="----=_NextPart_000_0026_01D04541.4641C2D0"
Message-Body:
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-ID: <[email protected]>
Content-Dis; handling=optional; ms-proxy-2007fallback
v=0
o=- 0 0 IN IP4 192.168.200.71
s=session
c=IN IP4 192.168.200.71
b=CT:99980
t=0 0
m=data 21300 TCP/RTP/SAVP 127
a=ice-ufrag:lYAu
a=ice-pwd:y0gkW4r9zGSW6E2VdtMprlEh
a=candidate:1 1 TCP-PASS 2120613887 192.168.200.71 10856 typ host
a=candidate:1 2 TCP-PASS 2120613374 192.168.200.71 10856 typ host
a=candidate:2 1 TCP-ACT 2121006591 192.168.200.71 21300 typ host
a=candidate:2 2 TCP-ACT 2121006078 192.168.200.71 21300 typ host
a=candidate:3 1 TCP-PASS 2120612863 10.0.154.20 31624 typ host
a=candidate:3 2 TCP-PASS 2120612350 10.0.154.20 31624 typ host
a=candidate:4 1 TCP-ACT 2121005567 10.0.154.20 3921 typ host
a=candidate:4 2 TCP-ACT 2121005054 10.0.154.20 3921 typ host
a=cryptoscale:1 client AES_CM_128_HMAC_SHA1_80 inline:4CZbzYM/GYDbygj8JwMTodKo85C4Xx7TMzeMIuBU|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:Ohlo65gDsUvxCF39A382Rl4vGL+SG9R/lUEYU/br|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80 inline:EZ7Zm3K0H/WW5K49LAk9/C0T8x8nhkumJOycSek7|2^31
a=setup:active
a=connection:new
a=rtcp:21300
a=mid:1
a=sendonly
a=rtpmap:127 x-data/90000
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/ms-filetransfer+xml
Content-Transfer-Encoding: quoted-printable
Content-ID: <[email protected]>
Content-Dis; handling=optional
<request xmlns=3D"http://schemas.microsoft.com/rtc/2009/05/filetransfer" =
requestId=3D"13">
<publishFile>
<fileInfo embedded=3D"true">
<id>{67190A30-C59F-480D-96DD-5F3941C39C49}</id>
<name>dbchange.log</name>
<size>3609</size>
</fileInfo>
</publishFile>
</request>
------=_NextPart_000_0026_01D04541.4641C2D0--
$$end_record
I've got my b2bed invite looking almost identical to the original invite by creating a custom MIME type on the CallEstablishOptions for the back to back call using something like this:
Regex r = new Regex(@"^((.|\n)*)(\<request)((.|\n)*)(request\>)((.|\n)*)$");
Match m=r.Match(args.RequestData.GetMessageBodyString());
content=string.Format("Content-Transfer-Encoding: quoted-printable\r\n{0}{1}{2}",m.Groups[3],m.Groups[4],m.Groups[6]);
opt.CustomMimeParts.Add(new MimePartContentDescription(new ContentType("application/ms-filetransfer+xml"),System.Text.ASCIIEncoding.UTF8.GetBytes(content)));
opt.CustomMimeParts[0].ContentDispositionHeader = new SignalingHeader("Content-Disposition", "render; handling=optional");
So far the only differences I can see in my outbound message vs the original SDP are that the Content-Transfer-Encoding might not be seen as a header (since the SignalingHeaders property on the MimePartContentDescription is read only), and the Content-Transfer-Encoding
on the first MIME part (created by the BackToBackCall) is missing (even though I specified it on the PassThroughHeaders). Even with all of this though, I still get a 488 on client B when I attempt the transfer (even though the invite goes through).
What I'm wondering though, is whether there's any way at all to get this working the way I'd expect, where a file gets transferred directly between A and B, without my bot having to receive it first. The other approach I've looked at is binding my
own media provider class to customize the SDP, but if this MIME part approach isn't going to work, then I have a feeling the media provider won't work either.
Any suggestions on where to look next?
Thanks!
ChrisChris,
I am trying to do something similar to this and from what I have read and in talking to MS is that you need to extend the Call and Flow class which it looks like you have been able to do. Could I bother you to share what you have written? Maybe we can help
each other out on this. I am basically trying to create an application that will be able to capture a file transfer and save it, then send the original request on to the intended recipient.
Thanks in advance,
Anthony -
i just purchase the new iphone 4s. I also have an old ipod with a lot on songs which are not on my itunes becasue i didn't do a file transfer when i got my new computer a ew months ago. How can i add my songs from the old ipod to my itunes.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
MBP (mid-2009) freezing, slow installations and file transfer
I bought the latest MacBook Pro model and installed Snow Leopard on a cleanly formatted hard drive. I have tried migrating via ethernet and FireWire from my iMac, but the migrations failed either due to freezing (via FireWire after roughly 24 hours of file transfer) or by an error message (ethernet with Migration Assistant).
Only through a Time Machine backup was I able to transfer my account files to the MBP, which again totaled at over 20 hours of transferring. The system was a mess, clogged constantly by freezing and spinning beach balls of death for durations lasting around 10-20 seconds during which music would clip after 5-10 seconds of everything not responding, this being accentuated especially during installations. I decided to format and try anew.
Now I've formatted the hard drive, installed Snow Leopard and will transfer my files manually onto a clean account. Installations take a long time although SL installation is within 30 minutes, iLife took 1.5 hours to install 5 GB. During the installation Safari stopped responding, as did the entire system, and the spinning beach ball would keep spinning. Watching a 480p trailer in Quicktime made the entire computer freeze up (no video/audio) for 10 seconds halfway. Transferring 136 GB (my Music folder) will take around 15 hours according to the estimate after 10 minutes of transferring.
I've sold my iMac now and all I have are the files on my external hard drive. I want to get them onto my MBP ASAP but the slowness is preventing me from doing what needs to be done and it's very frustrating. When I try to boot into Hardware Testing by holding D down the computer doesn't do it no matter what (Application DVD in or not, plugged into power or not). I've tried resetting PRAM but I get the same inaction.
Any ideas?
Edit: I've done Disk Utility to no avail, it finds nothing wrong.Installed, still getting freezes with spinning beach balls. Transfer says it would take 1 hour opposed to that 15 hours, but it stops transferring after X amount of gigabytes (from 0.5 to 5), not do anything for a while and then continue, stretching the estimate to over 2 hours after some time. I don't know if this is just with the hard drive.
The freeze-ups are frustrating as **** and make for a very poor experience. Any ideas to get to the bottom of this? I still haven't been able to boot into the Hardware Test no matter how much I try. -
Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!know where it may originate from?
The Huawei wireless modem driver. -
Setup:
Cable modem to Linksys WRT54g broadcasting only in G only mode for PBG4.
AEBSn#1 in bridge mode via Ethernet from Linksys, N only mode, broadcasting wirelessly.
AEBSn#2 is wirelessly extending N-only from AEBSn#1, and is connected to a mini with external hard drive.
Using PBG4, if I mount a volume from the mini and transfer a file, transfer time is very slow: approx. 20 minutes for a 200MB file. If I FTP from PBG4 into the mini, transfer time is 2 minutes.
(I think the same happens if I use a Macbook Pro connected to the N-only network, but it's in for repairs right now, so I can't be sure.)
Any idea why the transfer times are so different b/w AFP and FTP and, more importantly, what I can do to remedy this? Thanks.Same problem here. I have two AEBS Gigabit in bridge mode. Transfering a file via FTP or with Apple Remote Access (ARD) brings up to 3 MB/sec. Same file and same configuration connected via AFP only brings 60 kB/sec.
I hope somebody has an idea how to fix this.
Thanks in advance -
How to achieve the maximum file transfer rate from PXI to local host?
I will have to copy a huge amount of data (as big as 50 GB) from a PXI-8106 unit on site to a laptop. Currently it would take several hours. It is critical to max out the data transfer rate.
The standard method we've been using is just drag and drop using Windows Explorer via FTP. I tried to use FTP VIs with Filezilla Server as well but the transfer rate is only like 1.5 MB/s. Is this normal? Once I saw it was 3.0 MB/s but for some reason, that isn't happening now.
For another option, I tried to transfer data to a USB flash drive but it's even slower. As far as I know, USB 2.0 transfer rate is supposed to be around 60 MB/s but why would it be slower than 1.5 MB/s? What could be the speed limiting factor in my file transfer setup?
Any tips on improving file transfer rate would be appreciated!Sustained 40 MB/s? That is my dream speed! The maximum speed I've ever seen here was about 25 MB/s, which is still very good, and that happened only after copying back and forth, which I explained above. Let me go through what I did with screencaps first.
These are the test tdms files to transfer in the PXI: an original file witten in the PXI and its copy file. I copied the original file from PXI to laptop and renamed it (added '_copy') and then copied it back to PXI.
FTP module is transferring the original file to the Filezilla server on laptop. Note the low speed.
FTP module is transferring the copy file to the Filezilla server on laptop. Note the higher speed.
This is the FTP sub VI I'm using. It transfers files in sub-folders (one level lower), too. The data connection is set to 'passive' on the FTP Put Multiple Files VI but it doesn't seem to make any difference. I attach the sub VI.
You tried the file transfer with a 500 MB text file. Would there be any difference if the file type was tdms? Would the RAM size matter? It is 2GB here.
And the LED is orange, which means Gigabit.
Another question: Is there any way to programmatically stop file transfer in progress? Currently, I just have to restart the PXI.
Thank you!
Attachments:
FTP.vi 40 KB -
How do you install CS5 onto a new computer without Time Machine/file transfer
I'm not getting a new computer, but my current one is getting a little old (Macbook Pro V. 10.6.8) and I'm afraid it might crash if I download the newest Maverick system, which is why I want to make absolutely sure I'm able to save and transfer all my old files and CS5 Creative Suite programs if this indeed happens. I don't trust Time Machine to do it; my boss had this happen and Time Machine did not transfer the Adobe programs. I also don't want to rely on Time Machine and any other file transfer (which all new Macs offer) because I've had brand new computers crash because of old corrupt files from my old computer converting over, and the Apple people said it's a bad idea (which would have been nice to know BEFORE the computer crashed and everything. . .) I've been told you can only use the CD to install CS5 onto your computer twice, which I've already done (thanks to my brand new computer crashing once already). So I would like to know how it's possible to install the program onto a new computer should this one crash, without the use of file transfer or Time Machine. I have no interest in upgrading to CC.
Thanks!Avoid using Time Machine for re-installing Adobe software. It rarely works and usually breaks the activation mechanism.
I've been told you can only use the CD to install CS5 onto your computer twice,
Not quite.
You can install the software as many times as you like but you can only activate the software for use on a maximum of two computers at the same time.
To re-install you will need your CS5 serial number.
Download the installer from Download CS5 products
Install then enter your serial number when prompted. -
Will all my files transfer over (or stay) automatically right after upgrading to Yosemite or do I have to backup every single desired program or document? Question is do I HAVE to please if you can answer if its mandatory or not. Not looking for recommendations that I SHOULD back up or anything like that just want to know if it is mandatory to perform a backup to be able to keep or transfer all my current programs and apps and documents currently on my MB Pro Retina.
Yes, upgrading to Yosemite will not touch your 3rd party apps or files in the Home folder.
Although not mandatory you should have a a backup of your hard drive regardless if you upgrade to Yosemite or not. To not have a backup is just playing Russian roulette as there are only two types of hard drives; those that have failed and those that will.
Maybe you are looking for
-
What happen to the scrolling arrows in word 2008?
There used to be arrows on the side for me to scroll up and down. What happened to them? I'm workinig in Word 2008 with Lion. All the scroll bar has is the double arrows which will give you the "previous," or "next page." I don't want the next pa
-
I have a white intel i mac and when i boot up a file with a question mark shows up
i installed wnow leopard and then attempted to use boot camp to install windows (thats a whole other story though) after i got windows on it and then got it back to the mac side i found i could not get back to the windows side so i attemted to delete
-
EFI install - NO OS installed (formerly 10.5)
Hi, I've had a problem with the OS on my MacBook Pro (mid-2009, 13") and I can't install OS X 10.5 back on, i've read that it's possibly something to do with the EFI bootloader. Is there any way to install the EFI bootloader, WITHOUT an OS installed?
-
Error during application of the NLS patch 6678700 for 6678700_ZHS language
FAILED: file XLIFFLoader.class on worker 8 for product xdo username XDO. Time is: Thu Feb 24 2011 10:54:01 Assigned: file XLIFFLoader.class on worker 1 for product xdo username XDO. Time is: Thu Feb 24 2011 10:54:01 Assigned: file XLIFFLoader.class o
-
Reinstalling Mac OS X Problem. Can't lose information. Need quick response!
Okay ,so I recently had a software problem with my mac, and I went to the apple store and the genius told me I need to reinstall mac os x tiger, and it wil work. WEll I put the disc in and he gave me specific instructions on how to keep all my docume