Strange flash audio problem

Can anyone help me with this strange audio issue? Seeming
randomly, I am loosing the audio to my movie. I will publish or
preview the movie and notice that suddenly the audio is not there.
I am not doing anything related to the flv and I can’t tell
why it happens. If I go back to the FLA and hit undo several times
I often get the audio back. This time I can’t get it back.
??? Could I have something selected that I don’t know about?
Any thoughts?
Thanks!

"I can't seem to find any help on the Flash/Macromedia pages..."
http://www.adobe.com/support/forums/

Similar Messages

Flash Audio problem...

***Please note- I am a MAC user- currently running Tiger OS X
10.4***
I've noticed lately that I can't hear any Flash-based audio
on webpages, regardless of the browser (I mostly use Firefox, but I
also run Opera and Safari). Any Flash-based music player (i.e. the
ones used on MySpace) will load and appear to be playing, but no
sound comes out.
My speakers are fine. I can still play files via iTunes.
I noticed I started having the problem after I downloaded the
MSPlayer codec (
http://mplayerosx.sourceforge.net/).
I've deleted to codec, but still have the audio problem. I'm not
even sure if it's related, but the timing of it all leads me to
believe that it is...
I've tried re-installing the latest version of Flash and ran
Disk Utility, but still no sound.
Is there a particular system folder somewhere that I should
be looking for to make sure certain files are in order?
Any help would be greatly appareciated. Thanks!

"I can't seem to find any help on the Flash/Macromedia pages..."
http://www.adobe.com/support/forums/

Strange flashing cursor problem

Hi,
I've just finished installing Vista 32bit on my Macbook Air (1.6) and its working fine apart from one small problem - when starting up it freezes on a black screen with a flashing cursor for 2-4 mins and then will start loading Vista fine. Once in there is no problem and its stable and what not. I have had a look at some on the articles on here and other forums and the flashing cursor problem usually refers to when people try to first install a MS OS and not once one has been installed successfully.
I only have to boot into Vista every now and then and only for a few minutes at a time so I usually spend as much time in Vista as it does loading.
Any help appreciated.

General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
Unless you did a clean install, and I can't tell what your system maintenance is whether it is what I would do. Backup / clone your system, use ML RECOVERY and erase the system partition and update with just Apple updates, don't restore anything.
Run Apple Hardware Test.
Take it in for a free check and diagnosis.

Strange Flash Audio Sync Issue

This is by far the strangest problem I have come upon and
can't find anything in any forum discussing it. My site is
www.aloversscent.com. We are trying to put up 4 videos. I am
editing in FCP and compressing in Compressor to H.264 and then
making the files flv files to bring directly into Flash. All of
them are working fine except for our third episode, Operation Fox
Hunt. The audio sync is going off when the title cards come up,
about a 1/3 of the way through the video and only then. I went back
and made new exports where I tried filling in the blank audio
pieces under the cards with Slugs, I tried creating the title in
LiveType and then transfering it over instead of using the FCP
title cards. But neither worked. The strange thing is they work
fine when I play them in Quicktime. It's only when they play in
Flash that they get out of sync. If you scrub through the timeline
they will sometimes match back up again but while playing they
always get out of sync. I have run out of answers and need help
bad. Please let me know if you have any ideas.

Are the audio files being brought into Flash as FLV?
The only audio sync solution I have found is to set the MP3
compression to
anything higher than the default of 16kbps (Publish
Settings).
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"Thiago Prado" <[email protected]> wrote in
message
news:genud0$hue$[email protected]..
> This is by far the strangest problem I have come upon
and can't find
> anything
> in any forum discussing it. My site is
www.aloversscent.com. We are trying
> to
> put up 4 videos. I am editing in FCP and compressing in
Compressor to
> H.264 and
> then making the files flv files to bring directly into
Flash. All of them
> are
> working fine except for our third episode, Operation Fox
Hunt. The audio
> sync
> is going off when the title cards come up, about a 1/3
of the way through
> the
> video and only then. I went back and made new exports
where I tried
> filling in
> the blank audio pieces under the cards with Slugs, I
tried creating the
> title
> in LiveType and then transfering it over instead of
using the FCP title
> cards.
> But neither worked. The strange thing is they work fine
when I play them
> in
> Quicktime. It's only when they play in Flash that they
get out of sync. If
> you
> scrub through the timeline they will sometimes match
back up again but
> while
> playing they always get out of sync. I have run out of
answers and need
> help
> bad. Please let me know if you have any ideas.
>

Flash Audio Problem -- Audio stops abruptly

Gidday guys,
As part of a website, I currently have a page that includes
11 different flash files. For each flash file, visitors can click a
button to play a small audio clip, and click the button again to
stop the clip from playing.
The problem I have is that each flash file plays 1-2 seconds
or so of it's sample before stopping abruptly. Each sample is
supposed to be around 20 seconds long. IF I remove 10 of the 11
flash files from the page, the one that is still there will play
fine - but as soon as I introduce multiple flash files, the audio
starts dropping out again.
I've tried arranging the audio into the flash files in two
ways.
Firstly, I just linked the mp3 files from the library to the
stage via
quote:
soundInstance = new Sound();
soundInstance.attachSound("voice");
& then
quote:
soundInstance.Start;
noticing that this caused a problem, I tried making a flash
file that called a .swf with the streaming sound in it such as:
quote:
playbit.loadMovie("annavoice.swf");
but the problem still remained. I've tried it from 2
different PCs, and the problem shows in both. It's not a bandwidth
issue, as it occurs whether I try to load the page locally or from
my server...Any suggestions for solving this problem would be
really really appreciated - cheers gang. :D

"I can't seem to find any help on the Flash/Macromedia pages..."
http://www.adobe.com/support/forums/

Flash audio problems (havent seen reported elsewhere)

I know there are lots of issues documented with sound, but this one I havent seen
Problem: Sites with flash running cause my speakers to make a horrificly load buzzing sound. Flash video slows wayyy down...almost like in slow motion. All other audio features (mp3, .avl, .wmv) seem to work fine.
Attempted Solitions: Ive done all the stuff. Cleared everything with CCleaner. Downloaded Flash Uninstall executable and resintalled. Rebooted. No help.
One thing to note is that this problem is somewhat intermidant. Its almost like it corrects itself at times. I usually keep my computer on mute to prevent navigating to a random site running flash and having the speakers burst out scaring the *#@(# out of me.
Just wondering if anyone has seen this? Is this a known issue? Does anyone have any suggestions other then "reinstall and reboot".

The only thing Ive come up with is my VPN. I have noticed that this issue only occures when Im logged into VPN and using a proxy server. Maybe this is how flash deals with slower connection? I will take this chance to throw in one dig....no wonder apple wont support this turd. My internet experience has been on a steady decline since the day flash became the standard for video. I know nothing about the industry or alternatives, but this thing sux

Flash audio problems

Hi guys,
I'm using flashplugin-prerelease from AUR in the 64bit version together with Firefox and have the strange problem that I don't have sound in flash files after some time. Furthermore I use alsa as my sound backend.
Any ideas or similiar experiences?
Regards

orschiro wrote:hibernating/suspend
That often has problems apparently - thankfully I don't need/use it myself. I suggest trying a kernel which includes tuxonice.
I would recommend kernel26-pf, because it also includes the BFS.

Intensity Pro to Flash Audio Problems

Hi,
I'm attempting to pull live video from the Blackmagic
Intensity pro. I can generally pull video content (using component
cables NOT hdmi in this case), but audio is a problem. It appears
that the board is defaulting to 48kHz audio, which is conflicting
with the audio capture in FME 2.5. I get a messagebox saying "The
parameter is incorrect" and then the sample selector in FME is
blank. It doesn't appear I can change the sample rate on the board
directly.
So, my question is: Has anyone successfully pulled live video
AND audio from the intensity pro and what method did they use?
Again note, I'm trying to do this live to send to FMS and not
encode to a file (which I know works in premiere, but might be
using other plugins or something to work).

Perhaps I'm misunderstanding, but FME doesn't support AAC
encoding for the audio, right? I still only get the option for mp3
when using h.264.
I actually called Blackmagic today and the support guy told
me this was a known bug. He blamed both sides basically and said
that it used to work, but they probably just have to sit down at
some point and account for changes in drivers and software to make
it work again.
He suggested that windows media encoder was known to work
with the card, but knew that required a bit of hacking and possible
programming to run things thru ffmpeg or some other encoder for
live streams. He had also heard that some people had gotten VLC to
work with it, but wasn't sure on the details.
For now, I'll just have to try the other methods until FME
and Blackmagic sort it out. Please sort it out Adobe and
Blackmagic. :) It would save me some trouble from having to code a
solution myself.

Blogger / Flash audio widget spacing problem

This is a multi-part message in MIME format.
------=_NextPart_000_0157_01C8E5D5.30A1E450
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Please excuse me re-posting this question, but I have new
info and =
needed a new subject line. :-)
I'm trying to use a very nice little Flash audio player
script on a =
Blogger page. Here's what it looks like on a simple HTML
page:
http://ayersvirtual.com/deleteme.htm
On that page above, in all my browsers, the spacing above and
below the =
audio player is fine. That's what I want.
But when I put the same code in a Blogger post, there are
massive =
top-bottom margins in Firefox 3, and none at all in IE 7.=20
Here is a sample Blogger post showing this:=20
http://pattyayers.blogspot.com/2008/07/blogger-flash-audio-player-problem=
.html
I dug through Blogger's CSS, and don't see anything that
should cause =
this. I added a line of CSS targeted at the <object>
tag, zeroing its =
margins, but that didn't do it.=20
Any help with figuring this out would be MUCH appreciated!
--=20
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
------=_NextPart_000_0157_01C8E5D5.30A1E450
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6001.18063"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2>Please excuse me
re-posting this =
question, but I=20
have new info and needed a new subject line.
:-)</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I'm trying to
use a very nice little =
Flash audio=20
player script on a Blogger page. Here's what it looks like on
a simple =
HTML=20
page:</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><A href=3D"
http://ayersvirtual.com/deleteme.htm"><FONT
face=3DArial =
size=3D2>
http://ayersvirtual.com/deleteme.htm</FONT></A></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>On that page
above, in all my browsers, =
<STRONG>the=20
spacing above and below the audio
player</STRONG> is =
fine. That's=20
what I want.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>But when I put
the same code in a =
Blogger post,=20
there are <STRONG>massive top-bottom margins in Firefox
3</STRONG>, and=20
<STRONG>none at all in IE 7</STRONG>.
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Here is a sample
Blogger post showing =
this:=20
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial=20
size=3D2>
http://pattyayers.blogspot.com/2008/07/blogger-flash-audio-playe=
r-problem.html</FONT><A=20
href=3D"
http://pattyayers.blogspot.com/"></A></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I dug through
Blogger's CSS, and don't =
see anything=20
that should cause this. I added a line of CSS targeted at the
=
<object>=20
tag, zeroing its margins, but that didn't do it.
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Any help with
figuring this =
out would be MUCH=20
appreciated! :-)</FONT></DIV>
<DIV><BR><FONT face=3DArial size=3D2>--
<BR>Patty Ayers | </FONT><A=20
href=3D"
http://www.WebDevBiz.com"><FONT
face=3DArial=20
size=3D2>www.WebDevBiz.com</FONT></A><BR><FONT
face=3DArial =
size=3D2>Free Articles on=20
the Business of Web Development<BR>Web Design Contract,
Estimate Request =
Form,=20
Estimate
Worksheet<BR>--</FONT></DIV></BODY></HTML>
------=_NextPart_000_0157_01C8E5D5.30A1E450--

Yeah, it does make me appreciate Wordpress. I would have
stuck with it, but
when I found out that you have to pay to edit your CSS (on
their hosted
plan), I switched back to Blogger!
I'll keep my eye on that beta ("draft") version of Blogger. I
have to be
cautious with my client's account, but maybe I'll try it for
my own blogs.
Thanks again...!
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
"Mad Dog" <[email protected]> wrote in
message
news:[email protected]...
> I'm glad it worked. Yes, it's weird how Blogger adds
<br>s, but remember,
> it's for the masses who still act like they're on
typewriters, so it does
> make sense for most people. As I mentioned, the new
version (in Draft mode
> now) supposedly will get rid of that. Funny....the first
thing I was going
> to tell you want to remove anything more than a single
space from the
> <object>.....
>
> I'm surprised the setting affects everything. I would
have expected it
> would only affect a new post, not everything!
>
> Makes ya appreciate Wordpress, doesn't it? (Though I do
like the interface
> in Blogger)
>
> Anyway, glad I could help point you in a direction.
>
> MD
>
> P@tty Ayers ~ACE wrote:
>> I think I found a way! I can't leave that setting
turned off, because
>> my client needs it turned on. (What a bizarre and
silly way Blogger
>> handles something as simple as paragraphs of text!)
>>
>> But, if I remove every ounce of white space from the
<object> tag
>> before I paste it in, Blogger doesn't add any
<br> tags into it.
>>
>> I believe this is going to work. Mad Dog, thank you
VERY much for
>> giving me the clues I needed. I truly appreciate
it!! This was really
>> about to drive me crazy.
>>
>> --
>> Patty Ayers | www.WebDevBiz.com
>> Free Articles on the Business of Web Development
>> Web Design Contract, Estimate Request Form, Estimate
Worksheet
>>
>> "P@tty Ayers ~ACE"
<[email protected]> wrote in
>> message news:[email protected]...
>>>
>>> "Mad Dog"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>
>>>> First...try going into the SETTINGS >
FORMATTING and change
>>>> "Convert line breaks" to "No." That might
help, but might not.
>>>> Blogger loves adding <br> and has been
known to add them in
>>>> embedded objects.
>>>
>>> That stops Blogger from adding <br /> tags
into my <object> code!
>>> Yay!! But unfortunately it left all of my blog
posts completely without
>>> any
>>> paragraphs at all. If this was just for *my*
blog, I could just add
>>> the <p> tags in (which I tried, and it
works). But it's for my
>>> client's blog, and she's not going to do that.
>>>
>>> Does Blogger seriously not have a setting where
hard returns are
>>> turned into normal paragraph tags?? It's either
<br> tags everywhere
>>> and anywhere, or nothing??
>>>
>>>
>>> --
>>> Patty Ayers | www.WebDevBiz.com
>>> Free Articles on the Business of Web Development
>>> Web Design Contract, Estimate Request Form,
Estimate Worksheet
>>> --
>>>
>>>
>>>
>>>>
>>>> If that doesn't do it, try using the new
Draft version of Blogger
>>>> (
http://draft.blogger.com/).
It's still a work in progress (it won't
>>>> Autosave!) but it doesn't add the automatic
<br> linebreak. Check
>>>> out more info about it at
>>>>
http://bloggerindraft.blogspot.com/2008/06/new-feature-new-post-editor.html,
>>>> especially about halfway down. It's
certainly worth a try!
>>>>
>>>> (I used Draft Blogger when I was away a
couple of weeks ago since
>>>> if you advance date a post, it won't show up
until then, unlike the
>>>> current version which posts it immediately
but with an advance
>>>> date. Doh!) MD
>>>>
>>>>
>>>> P@tty Ayers ~ACE wrote:
>>>>> The "Edit HTML" window in Blogger is a
strange thing. I never see
>>>>> much HTML in there. There are no
<p> or <br> tags, just my text.
>>>>> The code that I paste into the "Edit
HTML" window has no extra <br
>>>>> /> tags. Blogger apparently adds them
before publishing the page.
>>>>>
>>>>> In other words, no, I can't manually
remove them, because they're
>>>>> not shown to me. :-(
>>>>>
>>>>> Do you use Blogger, MD? Is the "Edit
HTML" feature like that for
>>>>> you, also? Any other ideas?
>>>>>
>>>>> --
>>>>> Patty Ayers | www.WebDevBiz.com
>>>>> Free Articles on the Business of Web
Development
>>>>> Web Design Contract, Estimate Request
Form, Estimate Worksheet
>>>>>
>>>>> "Mad Dog"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Have you gone into the HTML window
and manually removed them?
>>>>>>
>>>>>> P@tty Ayers ~ACE wrote:
>>>>>>> Yup, Blogger has added 7 <br
/> tags *inside* my <object> tag.
>>>>>>> Argh. What I need is a way to
stop Blogger from doing that. I
>>>>>>> wonder if I can trick it
somehow.
>>>>>>>
>>>>>>> --
>>>>>>> Patty Ayers | www.WebDevBiz.com
>>>>>>> Free Articles on the Business of
Web Development
>>>>>>> Web Design Contract, Estimate
Request Form, Estimate Worksheet
>>>>>>>
>>>>>>> "P@tty Ayers ~ACE"
<[email protected]> wrote
>>>>>>> in message
news:[email protected]...
>>>>>>>> I'm sure you're both right,
but there are no <br /> tags in the
>>>>>>>> <object> code that I
enter into Blogger. For some perverse
>>>>>>>> reason, Blogger adds them.
Not sure where that leaves me. :-( Any
>>>>>>>> ideas? --
>>>>>>>> Patty Ayers |
www.WebDevBiz.com
>>>>>>>> Free Articles on the
Business of Web Development
>>>>>>>> Web Design Contract,
Estimate Request Form, Estimate Worksheet
>>>>>>>> --
>>>>>>>>
>>>>>>>> "Speculumcm"
<[email protected]> wrote in message
>>>>>>>>
news:[email protected]...
>>>>>>>>> Osgood escribió:
>>>>>>>>>> You have quite a few
<br /> tags within the <object> tag
>>>>>>>>>> itself which
should'nt be there and will cause spacing issue.
>>>>>>>>>> I'd remove them and
see what happens.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Yep, Osgood it's right,
remove <br /> tags within <object> tag
>>>>>>>>> and <embed> tags
as well. Something like this:
>>>>>>>>>
>>>>>>>>> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
>>>>>>>>> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
>>>>>>>>> width="290"
height="24"> <param name=movie
>>>>>>>>> value="
http://mojomom.com/podcast/audio-player/player.swf"><param
>>>>>>>>> name=quality
value=high><param name="LOOP" value="false">
>>>>>>>>> <param name="wmode"
value="transparent"><param name="FlashVars"
>>>>>>>>>
value="playerID=1&soundFile=http://media.libsyn.com/media/mojomom/Mojo__Mom_and_Momma _Zen_v1.mp3">
>>>>>>>>> <embed
src="http://mojomom.com/podcast/audio-player/player.swf"
>>>>>>>>>
FlashVars="playerID=1&soundFile=http://media.libsyn.com/media/mojomom/Mojo__Mom_and_M omma_Zen_v1.mp3"
>>>>>>>>> quality=high
>>>>>>>>> pluginspage="
http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
>>>>>>>>>
type="application/x-shockwave-flash" width="290" height="24"
>>>>>>>>> loop="false">
</embed> </object>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Eso lo arregla
definitivamente
>>>>>>>>>
>>>>>>>>> Saludos
>
>

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

Captivate with Flash and Audio Problem

hi there,
I am having lot of flash files and all the audios inside the
flashfiles are "Event" Sync and not default "Streaming" which
brings out more problem like slow in clicking buttons and overall
project speed. but when i change it to Event it works fine at the
same time i cannot do any audio synching and other audio relatted
ewordl....
Please hlp me/...

I am having a similar problem where flash audio loops plays again on the slide after the one with the flash swf. Like it's replaying the sound twice, looping is not turned on... I've had multiple problems with flash and captivate like the new CS4 3d transitions just make it go balistic.

Flash Media Encoder 8 - audio problem

I'm having an audio problem with Flash Media Encoder 8. I am
converting a long Quicktime movie to Flash - about 28 minutes.
After encoding, when I play it back, at about the 20 minute mark
the audio just drops out. I've developed somewhat of a workflow and
have done this with similar Quicktime files many times and have not
had this problem. Does anyone have any ideas as to what may be
happening? Anyone else see this?
Some specs:
Flash 8, Mac OSX 10.4.10, MacBook Pro C2D

Five Pi,
It may have something to do with the audio rate in your QT
video. When using encoder, make sure your audio rate of your QT
file is higher than the audio rate of your Encoder settings.
Its just a guess, I have had the same problems, but I set the
audio quality to very high when exporting from Final Cut Pro, and
then set them to medium quality in encoder, and no more audio
problems.
Steve

Strange audio problem playback

I have what's probably an easy problem but can't find an
answer anywhere here. When using "Play" or using the return key to
preview my project in Flash 8 on OS X, I can't stop the audio. The
audio is an MP3 voice over.
Pressing "Stop" or using the return key again stops the
playhead, but the audio continues no matter what I do. I can go
back to the beginning and play it again, and now I'll have two VOs
going on at once. The only way I can get the audio to stop is by
closing out the project.
This is making timing my animation to match what the VO is
saying very difficult. Any ideas?

I am having the same problem, but only after reinstalling XP
and all my software on a new hard drive. My previous hard drive
hadn't had a fresh install of XP in three years and was giving me
intermittent problems. However my swf's work properly on the old
drive but not the new one. I'm guessing it's one of my updates of
Firefox, flash player (was using 9,0,28,0 but now am 9,0,45,0). My
scenario is complicated because I'm using Flash Media Server, but
again it works on one drive and not the other. The odd thing for me
is that if I create my swf on the new drive with 9,0,45,0 and then
play it back when I boot from the old drive, it still has the same
double audio problem that plays similar to you. My play/pause
button has no effect and the audio just keeps going. If I do pause
the audio and wait for my audio to finish and then hit play again,
my scrubber bar moves but nothing plays until it gets to the end
and starts over. I was also getting double audio at times as well.
Could this be the new player??? Have you figured anything out since
you posted last? I'm using XP, flash 8, Firefox 2.0.0.4.

Audio problems with embedded Flash

I have the Flash of a Captivate simulation embedded on one of
the slides in my Presenter file. When I publish it, the audio for
the Flash starts playing in the middle of the previous slide -
playing over the audio for that slide. When I click Pause, the
audio for the Presenter slide stops, but the Flash audio keeps
going even though I haven't gotten to the slide with the embedded
file yet. It always starts 4-5 seconds into the previous slide.
Does anyone have a clue why this is happening?
I've used embedded Flash files in Presenter several times
with no problems, and the settings in Presenter are all the same as
in the presentations that work correctly.
- In Presentation Settings, I have "controlled by
presentation playbar" deselected because there are click boxes in
the Captivate sim that users will click to advance.
- In Slide Properties, I have "advance by user" select for
both the embedded slide and the previous slide.
- I thought that there was some glitch in the Audio Editor,
so I added 5 seconds of silence at the end of the previous slide,
and added enough silence to the embedded slide to more than cover
the length of the embedded piece.
This is the first time I've tried to embed a Flash file since
I upgraded to Captivate 2. Could something have changed on the
Captivate side of things? It still doesn't make sense why the audio
would start playing before the Flash starts, but I'm grasping at
straws here.
Thanks!
Judi

A little additional information:
It isn't just the audio from the embedded Flash that runs
early - it's the actual Flash file. I don't know if this makes any
difference in figuring out what's going on, but thought I'd add
that bit of detail.
Also - I had found out that my Captivate project that I
created the Flash from had gotten corrupted and was hoping that
fixing that would fix this problem as well ... but no such luck...
Judi

Strange audio problem with my MacBook Pro

Hello everyone,
first of all I should say that this is not the well known "no-audio-from-internal-speakers-and-red-light-burning-on-microphone-jack" audio issue on many MacBook Pros. However, I still hope some of you experts can help me.
Here's what happens. At some point of the last few days, I realized I was not getting any sound from my Mac's internal speakers except the typical boot sound on startup. Then I opened the System Preferences/Sound window and saw that I have only one output option: "Headphones - Headphone port". No internal speakers at all. This doesn't mean I can use my headphones at all... When I connect them to the computer with my System Preferences still open, then the option "Headphones" change automatically to "Digital out" and no sound comes out of them. If I take them out, then I can see the red light for about half a second, then it's off. Ironically, I still can hear some sound (even perfect audio) out of my headphones when I don't put them completely into the jack but at some very unstable point at about 90% of the connector's size.
I can use the function keys F10-F12 to mute or turn up and down the sound... Everything seems to work - still no sound comes out. I thought of course of a hardware problem but I can hear the mac startup din-dong effect like always and I even let the AHT run with no negative results. I also tried repairing the hard disk permissions, as I read somewhere, with the Disk Utility. Still no results.
Anyone to give me a clue what's happening on my Mac? I bought it about 2 months ago, and the software is up-to-date (Mac OS X 10.6.6).
Any help would be much appreciated. Thanks,
Luis

Hi friends
I too have a macbook pro running 10.6.6 and an odd audio problem which has recently shown itself and although different to Luiscv's problem, may well be related.
My audio works fine through the built in speakers but gets all fruity with some but not all audio as soon as I plug in the headphones. I get crystal clear audio when playing mp3's through quicktime whether I have the headphones plugged in or not.
youtube flash movies through Safari and VLC .mkv files are problematic. I do get audio but the stereo sound somehow gets split so the dialogue gets very quiet and fuzzy and the musical soundtrack gets louder.
If this is a codec/decompression issue why does the sound come good when I unplug the headphones? Why are some files totally fine with both headphones and internal speakers?
I have updated perian, zapped p-ram, repaired permissions all to no avail.
Thanks in advance to anyone able to solve this one.
Best wishes,
Wayne Batistic

Strange flash audio problem

Similar Messages

Maybe you are looking for