Strange graphical issues and system shutdowns

Hi, glad I can type this message before my computer crashes...it's an early 2011 MBP with a dual SSD/HDD (optical drive removed) in installed myself but have had no issues for years. Until today.
I've been having a very strange problem lately that seems to have occurred spontaneously. Basically, sometimes the machine will just freeze mid process, leaving the screen still (might be able to move the mouse around). Other times, the screen will go completely white. In other cases, the left half the screen will be split and will be rendered on the right half, and the right half will be split and rendered on the left. If I plug a monitor in, it will sometimes crash or it even strobed for a while. In each of these cases, I have to hold the power button to reset the computer. And then after this, sometimes it won't boot and I have to repeat power off and on.
This problem also occurs on the windows bootcamp side. Same rendering issue, pictured below.
If it sound like I'm saying "sometimes" a lot, it's because it's hard to predict what's causing it. Seems very spontaneous. But I think it might be a graphics card overheating issue, although I did just play 2 hours of a detailed first person shooter and it wasn't a problem.
I did upgrade my RAM a few weeks back, but it's not the issue because I tried reinstalling the old pair and same thing happens. Maybe I fudged something up in that process? But I really didn't touch anything and I;ve done upgrades many times.
Anyone have any thoughts or methods to diagnose? Thanks.

Your MBP may fall into this category:
http://www.apple.com/uk/support/macbookpro-videoissues/
Ciao.

Similar Messages

Strange graphics issue when looking at JPGs in Safari and Preview.

I am having an issue in Safari and Preview under OS X 10.4.11. I have the exact same issue in both Safari 3 and 4(beta). The blacks on JPG images aren't black they are a dark brownish grey, all other colours show up properly. If I open the same website in Flock everything looks fine. If I download the image and open it up in Photoshop the image also looks fine. To make it even stranger if I open the image up in photoshop and re-save it as a tif file and open the tif file in Safari or Preview it looks normal. It just how it's handling JPGs!
See the following link for an image showing the issue... note the dark brownish grey colour around the watch:
http://c77ilw.blu.livefilestore.com/y1p66KB-yBArvIBleY3s1wGZ8EgAyxRd8VLnJ9XA9zJz gPUgIBbvM5aSqPz59g1nC5TehmACKYCw/Picture%201.png
Now look at what it's supposed to look like:
http://c77ilw.blu.livefilestore.com/y1pLSnu9AVt-IrsQNhBYUAS6OAAGQU2Tm7H8P9JPp9ba h4Y9wJR9bRYAGu6gLBodHXwGZaPqtzSUyI/1236465600.jpg
Any ideas? I've tried googling everything I can think of about this issue and haven't found anyone with the same or similar situation.

I believe it to be an issue with how Safari and Preview are displaying colours under OS X, the strange thing is about 4 weeks ago I had not problems with Safari displaying these types of images and can't think of any settings I changed around that time. Safari under Windows does not show this issue and it is not showing the issue on a different Mac running Safari under OS X 10.4.11 either, so it has to be a setting somewhere that inadvertently was changed I think.
Again it is only showing on black and near black colours no other part of the image is affected.
Below is a link I made in photoshop comparing a screen grab of the issue (top half) vs a downloaded copy (bottom half) of the image with raised curves to accentuate the difference for those who may have darker gamma settings and are having trouble seeing the problem.
http://c77ilw.blu.livefilestore.com/y1pkqqQbO439AUl0M1foDBBRwDdtSImNu9Nnmfc4LJMW CahrzW7FgljMfom6ikxcR8KrheOhGosfKf4UiYzKYRePA/Graphic%20issue.jpg

PCI-E graphics card and system memory conflict.

Hello,
I have a bit of a strange problem with my new system build.
All my parts work fine when used by them selves.
MSI KN8 diamond.
Athlon 3200 64bit 939 Winchester.
Crucial Ballistix PC4000 memory.
Inno3D 6800GT PCI-E
Thermaltake purepower 680W.
The problem arises when I try and use both the memory and graphics card card at the same time, the system does not post stating a memory problem. I know both work as I’m able to post when either is removed i.e when running with a standard PCI graphics card or when the memory is swapped. I’ve checked out a lot of forums over the last 2 weeks and I know there are a lot of people out there running with the same memory. I’ve tried under clocking the memory with no success. Can anyone shed any light on this problem as I’ve never had a conflict between a graphics card and memory before.
Thanks John

Need to make a couple of changes as there appears to be a possible issue with the loading of the Optimized Default setting in the bios, and I quote from MSI:
Quote
After loading the Optimized Default, the memory setting values will be optimized to achieve better performance. It is, however, likely to cause problems of compatibility.
Which seems to be the exact issue you are experiencing. First thing I would do is to manually set your vdimm to 2.8v in the bios. This will make sure that your memory is getting the correct voltages as the AUTO setting usually sets memory to 2.5v. This alone could eliminate your problem, but I think you'll have to comb through your memory timings and reset them, (Crucial lists 2.5-4-4-8 @ DDR500 speeds, so I'd try 2-3-3-6 or 2.5-3-3-6 for DDR400 speeds).
There is also an official bios 1.1 for your board, and a beta (5.01) from the Diamond Club. I'd stay with the official releases for the time being (until you get your board up and running properly).

I am frustrated with MAC BOOK PRO, I have 7 cases opened for same issue where System Shutdown does not happen.

Have my MAcbook Pro, since September '11 and started experiencing recurring issue where the system won't shutdown.
I have opend 7 cases since then with Apple Support performed, re-install, remove certain apps but the issue wont go away..
I would request Apple to take this product back, replace it with something new or refund..
Its not acceptable to reach out to Apple for same issue and you cannot pin point to what is going wrong with this machine.

I can't imagine why you have seven cases open for the same issue, and I imagine that that will greatly complicate getting it resolved to your satisfaction. I would contact AppleCare, provide all seven case numbers, and ask to have all of them consolidated into one unified case record -- IF that can be done without losing all the details.
You may think you are contacting Apple by posting here, but that isn't true. We are all volunteers here -- other Mac users like yourself. If another call to AppleCare with the request I've recommended above doesn't lead quickly to a satisfactory outcome, call Customer Relations at 1-800-676-2775. Be calm and polite, no matter how annoyed you are.

Background jobs and system shutdown

Hello,
I would like to know what happens if the BI jobs were not suspended prior to system shutdown? how will that impact those jobs after the restart of the system? I was wondering what would happen to the jobs that were active vs. jobs that were released/scheduled......we we need to re run/ re schedule them again after the restart? please advice...thanks

Hi,
When you say background jobs, I believe what you meant jobs in the "Active" or "Released" status. These jobs will get cancelled as once you shutdown, the work processes are going to stop.
Once, you start the system you can re-run them or re-schedule them. For BI jobs which perform data-loading from other satellite systems (ERP, SCM, or other BI systems in a data-mart kind of a configuration), these data loads will fail & the data in the infoCube, PSA, etc will not be the updated data (may be master or transactional data).
So, for these you'll have to request the BI-Teams to re-run the data load & batch jobs.
- Regards, Dibya

Very disturbing graphics issue in system prefs

Hi all. whenever I open the desktop/screen-saver pane in system prefs, it freezes up, and the screen saver preview locks up, forcing me to "force quit". The genius at the Apple Store showed me something interesting though: when we have the start menu active, the two pane's run smoothly, and you can choose a new desktop w/o it locking up. We isolated it as a software issue, because the graphics in other programs (iTunes visualizer, iPhoto) work just fine, and all other system prefs pane's function properly. Also the screen-saver itself works when active. Anyone having this same issue?

I'd try installing the iLife support 9.0.3 update. It solves the "screen saver of death" issue which sounds much like what you are experiencing.
http://discussions.apple.com/thread.jspa?threadID=2032815&start=15&tstart=0

G400s gaming issues and auto shutdown

i bought the G400s since the vendor told its great for work as well as gaming but whenever i play high graphic online games like League of Legends or Assassin's Creed brotherhood, it always says driver IRQL not less or equal. Can someone please help me to solve this issue since i have only 1 week holidays left for gaming!
and by the ways its not always driver irql. there are times when it says different stuff and the computer needs to shutdown.
looking forward for help

If your XBOX is wired or Wireless to the Router?
If your XBOX are wireless then login to the router setup page and change the Wireless Channel on your Router to 1 or 11, and then under the Advance Wireless Settings tab change the Beacon Interval to 50 >>Change the Fragmentation Threshold to 2201 Change the RTS Threshold to 2202 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

[SOLVED] Strange graphical issues in Chromium

I haven't tested this in any other browsers, so I'm not sure what the root cause of the problem is.
Symptom: http://i.imgur.com/88ek7BU.png
It only happens sometimes, but images (and sometimes links etc) are mangled like this ad. For links, it's sometimes possible to mouse over it and fix it (it gets a refresh when it has to draw the underline or something, I guess), but this ad was not fixable (not that I cared about seeing an ad, but the issue as a whole is quite irritating).
Are there plugins which improve image rendering and fix this? Is it a driver issue? What can I do and/or what info do you need from me so that this issue is resolved?
Last edited by 2mac (2014-01-06 15:17:46)

I get things like that too.
What environment are you using? (OpenBox, Kde, i3, Gnome?)
What is your video hardware / Driver. I see these on Intel Graphics.
Are you using a compositor? Which one? I seemed to see this more with xcompmgr than I do with Compton. I seem to see this more with OpenBox and less with i3
Edit: Also, have you messed with any of the rendering flags in Chromium, or are you using the default settings. Do not force hardware rendering. You might also (as an experiment) tell Chrome not to do hardware rendering.
Last edited by ewaller (2013-12-30 17:28:27)

Strange Graphics issue on switching users after awaking from sleep

As the title says... Here's the scenario:
I logon to my MBP, do some work, then put it to sleep.
My girlfriend comes along, and opens up the MBP. My logon details are presented to her, so she presses "Switch User".
When she does this, the MBP goes really funky. Loads of strange colors, some small areas of my logged in desktop appear, then loads of white cubes appear.
See:
http://www.rock-sound.net/stevetemp/stage1.jpg
http://www.rock-sound.net/stevetemp/stage2.jpg
Can anyone else confirm this happens on their MBP ? Otherwise Genius Bar here I come..

This happened on my iMac G5 and had the logic board and display replaced to no avail. Only happened when switching users.
Not happening on my MacBook Pro ... so far....and hope it stays like that.
Someone also said it might be to do with bad capacitors.

Solidworks graphics issues and macbook pro display and colours.......

....don't look quite right!
The contrast on the screen seems to be too harsh - but it is set at it's lowest point on the contrast slider. This is particularly apparent with shades of white to grey - an example is on the google homepage where I can see the grey outline or the search box on the top and down the left, but not along the bottom and up the right hand side.
In short, the display quality compared to my old ibook G4 is poor (although much brighter)
This problem seems worse working in XP under bootcamp than in OSX.
Also, I am having more serious graphics problems using solidworks in XP under bootcamp. Highlighted faces not highlighting, buttons not appearing to be pressed etc. Only small but VERY annoying!
Any suggestions greatly appreciated.

oops.....
that should be 'grey outline ON the search box'

GT70 0NC Graphics issue and UEFI question

Hello,
I have a GT70 0NC with aGTX 670M card
I just recently updated to a newer bios in hopes that it would give me the options for selecting the GTX 670M as the Main Card rather that the HD4000.
I have attempted to set a game to run using the GTX 670M card in the Nvidia control panel, but in the game options, only the HD4000 is displaying as an option.
Also, I updated my bios in hopes it would become a graphical one... UEFI i believe they are called, but it still the old one i am used to with pretty much not options... is there a wait to make it UEFI?
BIOS Updated:
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Wed 03/27/2013 at 7:46:49.78
Mainboard: MS-1762
PCB Version: REV:1.0
BIOS Version: E1762IMS.10J
BIOS Date: 6/8/2012
EC-FW Version:
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Thu 03/28/2013 at 17:37:07.53
Mainboard: MS-1762
PCB Version: REV:1.0
BIOS Version: E1762IMS.10R
BIOS Date: 11/21/2012
EC-FW Version:
Thanks in andvance!

Quote from: darkhawk on 29-March-13, 07:38:23
Watch that video. I know it's in Polish, but you can get the idea of what you can do....
You'll need to download NVidia Inspector first.
Follow the same steps, but instead of using "Half-Life", use whatever program it is that you're trying to play.
Thanks DarkHawk, i will try that when i get home. i also found this on the Nvidia Inspector. similar to yours, but in english.
Sooooo, is there a way to update my bios to a UEFI version? I thought that all i would have to do was update my bios, but i would really like the options that a graphical bios can give me... is it even possible?
I have a:
MSI GT70 0NC Gaming i7 3610QM 12 gig Nvidia GTX 670M 3 GDDR5
I am running Win 7 Ult. (64 bit)
not sure what else i can tell you... any help would be appreciated.

Adobe Pro CC weird graphical issues, and crash on using some tools like brush and pencil.

Just like the title says it keeps crashing.
I'm using the MSI GS60 ghost
with windows 8.1. 16GB RAM, intel core i7, and nvidia gt860m.
Just using my mouse, no tablet or something. Latest Version, And I do not have an Wintab32.dll
Can you help me because I need to use CC for my classes!

Brendan Stewart wrote:
i mean creating a layer mask and painting it back in with the paintbrush.
Yes that is normal. I have no problem with CS6, No lag or hesitation.
A tip for you if your creating the mask using a copy of a color channel. Set the brush blending mode to "Overlay" This will protect the mask Black and White areas. You will only be able yo paint in gray areas of the mask. When areas turn 0,0,0 Black or 255,255,255 White they become protected too. Use a Wacom tablet soft brush low opacity and many strokes

GDM and Gnome graphical issues with Nvidia card

Hi !
I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..) the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
Is the graphic card too old for gnome ? Or did I forget something ?
Thank you in advance for your help !! And sorry for my english ..
Here are some log with the nouveau driver :
- Xorg.log :
[ 9.026]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.026] X Protocol Version 11, Revision 0
[ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
[ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
[ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
[ 9.026] Build Date: 27 August 2012 08:08:29AM
[ 9.026]
[ 9.026] Current version of pixman: 0.26.2
[ 9.026] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
[ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.072] (==) No Layout section. Using the first Screen section.
[ 9.072] (==) No screen section available. Using defaults.
[ 9.072] (**) |-->Screen "Default Screen Section" (0)
[ 9.072] (**) | |-->Monitor "<default monitor>"
[ 9.074] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.074] (**) Option "AIGLX" "off"
[ 9.074] (==) Automatically adding devices
[ 9.074] (==) Automatically enabling devices
[ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 9.127] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 9.128] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 9.128] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.128] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.128] (II) Loader magic: 0x82225a0
[ 9.128] (II) Module ABI versions:
[ 9.128] X.Org ANSI C Emulation: 0.4
[ 9.128] X.Org Video Driver: 12.1
[ 9.128] X.Org XInput driver : 16.0
[ 9.128] X.Org Server Extension : 6.0
[ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
[ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.129] (II) LoadModule: "extmod"
[ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 9.156] (II) Module extmod: vendor="X.Org Foundation"
[ 9.156] compiled for 1.12.4, module version = 1.0.0
[ 9.156] Module class: X.Org Server Extension
[ 9.156] ABI class: X.Org Server Extension, version 6.0
[ 9.156] (II) Loading extension MIT-SCREEN-SAVER
[ 9.156] (II) Loading extension XFree86-VidModeExtension
[ 9.156] (II) Loading extension XFree86-DGA
[ 9.156] (II) Loading extension DPMS
[ 9.156] (II) Loading extension XVideo
[ 9.156] (II) Loading extension XVideo-MotionCompensation
[ 9.156] (II) Loading extension X-Resource
[ 9.156] (II) LoadModule: "dbe"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 9.157] (II) Module dbe: vendor="X.Org Foundation"
[ 9.157] compiled for 1.12.4, module version = 1.0.0
[ 9.157] Module class: X.Org Server Extension
[ 9.157] ABI class: X.Org Server Extension, version 6.0
[ 9.157] (II) Loading extension DOUBLE-BUFFER
[ 9.157] (II) LoadModule: "glx"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.164] (II) Module glx: vendor="X.Org Foundation"
[ 9.164] compiled for 1.12.4, module version = 1.0.0
[ 9.164] ABI class: X.Org Server Extension, version 6.0
[ 9.164] (**) AIGLX disabled
[ 9.165] (II) Loading extension GLX
[ 9.165] (II) LoadModule: "record"
[ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 9.166] (II) Module record: vendor="X.Org Foundation"
[ 9.166] compiled for 1.12.4, module version = 1.13.0
[ 9.166] Module class: X.Org Server Extension
[ 9.166] ABI class: X.Org Server Extension, version 6.0
[ 9.166] (II) Loading extension RECORD
[ 9.166] (II) LoadModule: "dri"
[ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.172] (II) Module dri: vendor="X.Org Foundation"
[ 9.172] compiled for 1.12.4, module version = 1.0.0
[ 9.172] ABI class: X.Org Server Extension, version 6.0
[ 9.172] (II) Loading extension XFree86-DRI
[ 9.172] (II) LoadModule: "dri2"
[ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 9.173] (II) Module dri2: vendor="X.Org Foundation"
[ 9.173] compiled for 1.12.4, module version = 1.2.0
[ 9.173] ABI class: X.Org Server Extension, version 6.0
[ 9.173] (II) Loading extension DRI2
[ 9.173] (==) Matched nouveau as autoconfigured driver 0
[ 9.173] (==) Matched nvidia as autoconfigured driver 1
[ 9.173] (==) Matched nv as autoconfigured driver 2
[ 9.173] (==) Matched vesa as autoconfigured driver 3
[ 9.173] (==) Matched fbdev as autoconfigured driver 4
[ 9.173] (==) Assigned the driver to the xf86ConfigLayout
[ 9.173] (II) LoadModule: "nouveau"
[ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
[ 9.191] compiled for 1.12.2, module version = 1.0.1
[ 9.191] Module class: X.Org Video Driver
[ 9.191] ABI class: X.Org Video Driver, version 12.0
[ 9.191] (II) LoadModule: "nvidia"
[ 9.191] (WW) Warning, couldn't open module nvidia
[ 9.191] (II) UnloadModule: "nvidia"
[ 9.191] (II) Unloading nvidia
[ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 9.192] (II) LoadModule: "nv"
[ 9.192] (WW) Warning, couldn't open module nv
[ 9.192] (II) UnloadModule: "nv"
[ 9.192] (II) Unloading nv
[ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
[ 9.192] (II) LoadModule: "vesa"
[ 9.192] (WW) Warning, couldn't open module vesa
[ 9.192] (II) UnloadModule: "vesa"
[ 9.192] (II) Unloading vesa
[ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.192] (II) LoadModule: "fbdev"
[ 9.193] (WW) Warning, couldn't open module fbdev
[ 9.193] (II) UnloadModule: "fbdev"
[ 9.193] (II) Unloading fbdev
[ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.193] (II) NOUVEAU driver
[ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
[ 9.193] RIVA TNT (NV04)
[ 9.193] RIVA TNT2 (NV05)
[ 9.193] GeForce 256 (NV10)
[ 9.193] GeForce 2 (NV11, NV15)
[ 9.193] GeForce 4MX (NV17, NV18)
[ 9.193] GeForce 3 (NV20)
[ 9.193] GeForce 4Ti (NV25, NV28)
[ 9.193] GeForce FX (NV3x)
[ 9.193] GeForce 6 (NV4x)
[ 9.193] GeForce 7 (G7x)
[ 9.193] GeForce 8 (G8x)
[ 9.193] GeForce GTX 200 (NVA0)
[ 9.193] GeForce GTX 400 (NVC0)
[ 9.193] (++) using VT number 7
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: drmOpenMinor returns 7
[ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.196] (II) [drm] nouveau interface version: 1.0.0
[ 9.196] (II) Loading sub module "dri"
[ 9.196] (II) LoadModule: "dri"
[ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.197] (II) Module dri: vendor="X.Org Foundation"
[ 9.197] compiled for 1.12.4, module version = 1.0.0
[ 9.197] ABI class: X.Org Server Extension, version 6.0
[ 9.197] (II) NOUVEAU(0): Loaded DRI module
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: drmOpenMinor returns 8
[ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.197] (II) [drm] DRM interface version 1.4
[ 9.197] (II) [drm] DRM open master succeeded.
[ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 9.197] (==) NOUVEAU(0): RGB weight 888
[ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
[ 9.197] (==) NOUVEAU(0): Using HW cursor
[ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 9.197] (==) NOUVEAU(0): Page flipping enabled
[ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
[ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
[ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
[ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
[ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 9.309] (II) NOUVEAU(0): Gamma: 2.40
[ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
[ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
[ 9.309] (II) NOUVEAU(0): Supported established timings:
[ 9.309] (II) NOUVEAU(0): 720x400@70Hz
[ 9.309] (II) NOUVEAU(0): 640x480@60Hz
[ 9.309] (II) NOUVEAU(0): 640x480@67Hz
[ 9.309] (II) NOUVEAU(0): 640x480@72Hz
[ 9.310] (II) NOUVEAU(0): 640x480@75Hz
[ 9.310] (II) NOUVEAU(0): 800x600@56Hz
[ 9.310] (II) NOUVEAU(0): 800x600@60Hz
[ 9.310] (II) NOUVEAU(0): 800x600@72Hz
[ 9.310] (II) NOUVEAU(0): 800x600@75Hz
[ 9.310] (II) NOUVEAU(0): 832x624@75Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
[ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
[ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
[ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 9.310] (II) NOUVEAU(0): Supported standard timings:
[ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
[ 9.310] (II) NOUVEAU(0): Supported detailed timing:
[ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
[ 9.310] (II) NOUVEAU(0): EDID (in hex):
[ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
[ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
[ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
[ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
[ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
[ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.363] (II) NOUVEAU(0): EDID for output TV-1
[ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
[ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
[ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
[ 9.364] (II) Loading sub module "fb"
[ 9.364] (II) LoadModule: "fb"
[ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.375] (II) Module fb: vendor="X.Org Foundation"
[ 9.375] compiled for 1.12.4, module version = 1.0.0
[ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.375] (II) Loading sub module "exa"
[ 9.375] (II) LoadModule: "exa"
[ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.380] (II) Module exa: vendor="X.Org Foundation"
[ 9.380] compiled for 1.12.4, module version = 2.5.0
[ 9.380] ABI class: X.Org Video Driver, version 12.1
[ 9.380] (II) Loading sub module "shadowfb"
[ 9.380] (II) LoadModule: "shadowfb"
[ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
[ 9.382] compiled for 1.12.4, module version = 1.0.0
[ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.382] (--) Depth 24 pixmap format is 32 bpp
[ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
[ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
[ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
[ 9.399] (II) EXA(0): Driver registered support for the following operations:
[ 9.399] (II) Solid
[ 9.399] (II) Copy
[ 9.399] (II) Composite (RENDER acceleration)
[ 9.399] (II) UploadToScreen
[ 9.399] (II) DownloadFromScreen
[ 9.399] (==) NOUVEAU(0): Backing store disabled
[ 9.399] (==) NOUVEAU(0): Silken mouse enabled
[ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 9.399] (==) NOUVEAU(0): DPMS enabled
[ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.399] (--) RandR disabled
[ 9.399] (II) Initializing built-in extension Generic Event Extension
[ 9.399] (II) Initializing built-in extension SHAPE
[ 9.399] (II) Initializing built-in extension MIT-SHM
[ 9.400] (II) Initializing built-in extension XInputExtension
[ 9.400] (II) Initializing built-in extension XTEST
[ 9.400] (II) Initializing built-in extension BIG-REQUESTS
[ 9.400] (II) Initializing built-in extension SYNC
[ 9.400] (II) Initializing built-in extension XKEYBOARD
[ 9.400] (II) Initializing built-in extension XC-MISC
[ 9.400] (II) Initializing built-in extension SECURITY
[ 9.400] (II) Initializing built-in extension XINERAMA
[ 9.400] (II) Initializing built-in extension XFIXES
[ 9.400] (II) Initializing built-in extension RENDER
[ 9.400] (II) Initializing built-in extension RANDR
[ 9.400] (II) Initializing built-in extension COMPOSITE
[ 9.400] (II) Initializing built-in extension DAMAGE
[ 9.800] (II) AIGLX: Loaded and initialized swrast
[ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
[ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 9.807] resize called 1280 1024
[ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.066] (II) LoadModule: "evdev"
[ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.075] (II) Module evdev: vendor="X.Org Foundation"
[ 10.075] compiled for 1.12.3.901, module version = 2.7.3
[ 10.075] Module class: X.Org XInput Driver
[ 10.075] ABI class: X.Org XInput driver, version 16.0
[ 10.075] (II) Using input driver 'evdev' for 'Power Button'
[ 10.076] (**) Power Button: always reports core events
[ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.076] (--) evdev: Power Button: Found keys
[ 10.076] (II) evdev: Power Button: Configuring as keyboard
[ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.076] (**) Option "xkb_rules" "evdev"
[ 10.076] (**) Option "xkb_model" "evdev"
[ 10.076] (**) Option "xkb_layout" "us"
[ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.117] (II) Using input driver 'evdev' for 'Power Button'
[ 10.117] (**) Power Button: always reports core events
[ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.118] (--) evdev: Power Button: Found keys
[ 10.118] (II) evdev: Power Button: Configuring as keyboard
[ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.118] (**) Option "xkb_rules" "evdev"
[ 10.118] (**) Option "xkb_model" "evdev"
[ 10.118] (**) Option "xkb_layout" "us"
[ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 10.119] (**) Option "xkb_rules" "evdev"
[ 10.119] (**) Option "xkb_model" "evdev"
[ 10.119] (**) Option "xkb_layout" "us"
[ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
[ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
[ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
[ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
[ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
[ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
[ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
[ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
[ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
[ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
[ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
- .xsession-errors in gnome session :
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
(gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
Last edited by Jejel59 (2012-09-06 11:34:53)

I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage. Cinamon is based on gnome3. I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
I strongly suspect that they are using the newer OpenGL 4 API. The Nvidia FX5200 is stuck at OpenGL 2.1.

Kernal panics and graphics issues

I have a 2008 MacBook Pro. Over the last few weeks I've been getting strange graphics issues. At first every other vertical line would go black and make the display unreadable. That happened occasionally for a few days then would snap out of it and go back to normal. The problem got worse, where the whole screen would shift colors, turning either a certain color like blue or green. Then it started to cycle through the colors and would flicker like a bad MTv music video from the 1980s. Eventually the display would always come back to normal, but I'm never sure for how long.
Lately I've received a few kernal panics, which I think are related to this issue. I've extracted the relevant logs below. My hunch is that my graphics card is going bad, but I've never had that happen on a computer before. Is this a known issue, is there anything I can do about it (replace / upgrade the card?)
Thanks.
Kernel Panic Log Entries:
panic(cpu 1 caller 0x00CED6A4): NVRM[0]: Read Error 0x00000100: BAR0 0xd2000000 0x5f681000 0x084700a2 D0 P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
panic(cpu 0 caller 0x00CED6A4): NVRM[0]: Read Error 0x00020400: BAR0 0xd2000000 0x654a0000 0x084700a2 D0 P0/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00cf0c1e, type 14=page fault, registers:
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0

The third-party system modification "Logitech Control Center" may be contributing to your problem. I suggest you back up all data, then uninstall it according to the developer's instructions. Reboot and see whether there's any improvement.
Back up all data before making any changes.

Sporadic hangups, and now some graphics issue

Mid 2010 15" MBP, OS X 10.6.8 with all software up to date, Core i5 2.53ghz, 8gb RAM here. Every so often when I've had the laptop on (with some occasional sleep) for a few days, it becomes unresponsive and I have to hold the power button in order to get anywhere with it. I've dealt with this for a while, and it's not too much of a concern. I upgraded from 4gb to 8gb RAM to see if that could help, but I'm not sure if that helped at all.
Now I've encountered a pretty strange graphical issue. The laptop became unresponsive, and google chrome began rendering very strangely. The dock had this happen as well. Terminal windows I had open were unaffected. After some time, the laptop became responsive again, albeit sluggishly. Screenshot of Chrome:
Any idea what's causing this? Should I be worried? I still have applecare, so if necessary I can bring it in to a service center without worrying about cost, but I'm writing a thesis and I'd rather not have to relocate everything to my windows box and find a whole new set of software for experimentation/writing/etc. Thanks for reading.

Can you post a link to a public page that doesn't require authentication (log in) to access it?
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Strange graphical issues and system shutdowns

Similar Messages

Maybe you are looking for