Strange - Home wireless network ok, no access Public networks

Ok, I'm not getting this, and I've been around computers for some time.
Got my B570 'round September last year. Worked great on home wireless network ( Brighthouse networks in Florida, with Ubee Wireless modem running Lightning or 40mb.)
Had to move to new place offering a house offering of wifi, had a bear getting that up, but finally did.
Here's the q, and I've seen this on an HP laptop running Vista, but that one died and I got this one.
Go to Starbucks, Panera's, Dennys or just about any other public place, and I can see the routers and even connect, but can't get anywhere on the internet. I get either a limited or no internet, or identifying, but that's it. I know that their router is working because i can make the wifi connection on my phone and browse no problem, and I see other patrons with different computers logged in at the same time.
McDonalds, I can get in, and soon as the network connection comes up, browser will pop up and allow me to accept McD's access rights page and I can connect. I know that Denny's has one too, but it doesnt pop up, and ( I know that this will sometimes happen too ) if I try to connect to a website, sometimes the local accept page will pop up, but usually not for me.
I have Google Chrome as my primary web browser, but even if I try to bring up via IE, no go.
I can connect to the internet via my droid phone usb wired or just wireless, but don't like that to be a regular solution.
I've already tried to update the wireless driver ( Broadcomm ), but computer tells me that i'm up to date. Enabled then re enabled. Flush DNS didn't help either, ipconfig / release and renew didn't do it either. Using Comodo Internet Security, and turned it off, even exited out of program and that didn't help either.
Today was an interesting day. went to Denny's thinking I'd get some work done, and couldn't get logged in. Went to Fedex Store to get some printing done, and logged in right away. Came home and can log into the communities public ( fee based ) network and can log right in. Looked in my bag and found a usb wifi dongle I had used for the HP when the wifi on it died out, but didn't try that yet. I'd rather not, I'd rather find out why the wifi on this laptop seems to be finiky with who's networks I'm using.
Any ideas would be appreciated.
Ron V.
Lenovo B570 - 4 G Ram, 500 G H/D
Windows 7 Home Premium 64b

hi Ronjie,
The issue you're facing is a very strange issue. From what i gather ist begging to choose the network it wants to work with. I may need more time to look inot his to see if it is a harware issue. But i would like to try something though. You may want to uncheck the IPV6 in ur Wireless network properties. 
To do that you will have to go to your "Network sharing centre" > Click on "Change adapter settings"  on the left hand panel > Highlight "Wireless network Connection" > Right Click "Wireless network Connection" and select on "Properties". Be sure to uncheck the "Internet protocol version 6 (TCP/IPV6)". Then click on and try to reconnect.
Let me know how it goes..
Regards

Similar Messages

  • When using mac on a home wireless network it causes all PC's to lose internet access

    When my Mac Books accesses the internet on our home wireless network it keeps all PC's from being able to acccess the internet.  Is there a setting on my Mac that keeps this from happening?

    Your ISP gave you an Address that looks like a random number. That goes only on the Internet-facing side of your Router. mine is something like 108.72.155.38. If you have your own Router, that number is NEVER the Manual IP Address of your Mac.
    Your Router has a "strictly local" number to which all Internet-bound  traffic is sent. Mine is 192.168.0.1 These are numbers at the bottom of a DHCP grouping., and almost always end in .1  Your Mac should never have this number as its OWN Number, but it may end up being listed as a Router Address. Typical numbers often start with 10. or 172 as well.
    Your Mac should have a number similar to, but not identical to the other computers on your local network. Setting it to pick up a number (from your Router) via DHCP says, "just get a number and use it." That is often the best way to proceed.

  • Home Wireless Network & Backup

    Hello-
    Can anyone suggest some helpful resources (e.g., websites) for configuring a home wireless network where different users (e.g., family members) can backup their files via the network instead of having to physically connect their computers to a separate, external drive? Thanks much.

    The new Apple Airport Extreme wireless router provides for this - connecting an external USB drive to the router for saving data and/or for backup purposes by anyone with access to the wireless network.
    http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2108.html

  • Home wireless network trouble

    I got a new wireless router, Netgear WPN824 from Newegg, a refurbished product. I set up a home wireless network using the online manual on the Netgear website. The router works well for the wired setup. But I could not connect to wireless.
    My wireless network shows up on the list of available wireless networks. I can connect to other wireless networks such as that of my neighbour's. I tried connecting to my network using both unsecured and secure WEP / WPA modes. Except once, I could never connect. That one time, as soon as I could connect and verify that I was indeed connected I thought the problem was resolved and so shutdown my system to see if i could connect again - alas, same trouble again. I use NetworkManager to connect, and here's the output for two networks - jaydoc which is my home network, and linksys, that of my neighbour's to which i can always connect.
    <info> Activation (wlan0) starting connection 'Auto jaydoc'
    Feb 26 02:37:04 Sarvam NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 26 02:37:04 Sarvam NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0)
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0/wireless): connection 'Auto jaydoc' requires no security. No secrets needed.
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Config: added 'ssid' value 'jaydoc'
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Config: added 'scan_ssid' value '1'
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Config: added 'key_mgmt' value 'NONE'
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 26 02:37:04 Sarvam NetworkManager: <info> Config: set interface ap_scan to 1
    Feb 26 02:37:04 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning
    Feb 26 02:37:05 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
    Feb 26 02:37:05 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associating -> associated
    Feb 26 02:37:05 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associated -> completed
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'jaydoc'.
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
    Feb 26 02:37:05 Sarvam NetworkManager: <info> (wlan0): device state change: 5 -> 7 (reason 0)
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
    Feb 26 02:37:05 Sarvam NetworkManager: <info> dhcpcd started with pid 2428
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
    Feb 26 02:37:05 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
    Feb 26 02:37:05 Sarvam dhcpcd: version 5.1.5 starting
    Feb 26 02:37:05 Sarvam NetworkManager: <info> DHCP: device wlan0 state changed normal exit -> preinit
    Feb 26 02:37:05 Sarvam dhcpcd: wlan0: broadcasting for a lease
    Feb 26 02:37:51 Sarvam NetworkManager: <info> (wlan0): DHCP transaction took too long, stopping it.
    Feb 26 02:37:51 Sarvam dhcpcd: received SIGTERM, stopping
    Feb 26 02:37:51 Sarvam dhcpcd: wlan0: removing interface
    Feb 26 02:37:51 Sarvam NetworkManager: <info> (wlan0): canceled DHCP transaction, dhcp client pid 2428
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) scheduled...
    Feb 26 02:37:51 Sarvam NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 2428 (expected 0)
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) started...
    Feb 26 02:37:51 Sarvam NetworkManager: <info> (wlan0): device state change: 7 -> 9 (reason 5)
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Activation (wlan0) failed for access point (jaydoc)
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Marking connection 'Auto jaydoc' invalid.
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Activation (wlan0) failed.
    Feb 26 02:37:51 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) complete.
    Feb 26 02:37:51 Sarvam NetworkManager: <info> (wlan0): device state change: 9 -> 3 (reason 0)
    Feb 26 02:37:51 Sarvam NetworkManager: <info> (wlan0): deactivating device (reason: 0).
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) starting connection 'Auto linksys'
    Feb 26 02:39:08 Sarvam NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 26 02:39:08 Sarvam NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0)
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0/wireless): connection 'Auto linksys' requires no security. No secrets needed.
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Config: added 'ssid' value 'linksys'
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Config: added 'scan_ssid' value '1'
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Config: added 'key_mgmt' value 'NONE'
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 26 02:39:08 Sarvam NetworkManager: <info> Config: set interface ap_scan to 1
    Feb 26 02:39:08 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning
    Feb 26 02:39:09 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
    Feb 26 02:39:09 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associating -> associated
    Feb 26 02:39:09 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associated -> completed
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'linksys'.
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
    Feb 26 02:39:09 Sarvam NetworkManager: <info> (wlan0): device state change: 5 -> 7 (reason 0)
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
    Feb 26 02:39:09 Sarvam NetworkManager: <info> dhcpcd started with pid 2444
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
    Feb 26 02:39:09 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
    Feb 26 02:39:09 Sarvam dhcpcd: version 5.1.5 starting
    Feb 26 02:39:09 Sarvam NetworkManager: <info> DHCP: device wlan0 state changed normal exit -> preinit
    Feb 26 02:39:09 Sarvam dhcpcd: wlan0: broadcasting for a lease
    Feb 26 02:39:17 Sarvam dhcpcd: wlan0: offered 192.168.1.115 from 192.168.1.1
    Feb 26 02:39:20 Sarvam dhcpcd: wlan0: acknowledged 192.168.1.115 from 192.168.1.1
    Feb 26 02:39:20 Sarvam dhcpcd: wlan0: checking for 192.168.1.115
    Feb 26 02:39:25 Sarvam dhcpcd: wlan0: leased 192.168.1.115 for 86400 seconds
    Feb 26 02:39:25 Sarvam NetworkManager: <info> DHCP: device wlan0 state changed preinit -> bound
    Feb 26 02:39:25 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
    Feb 26 02:39:25 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
    Feb 26 02:39:25 Sarvam NetworkManager: <info> address 192.168.1.115
    Feb 26 02:39:25 Sarvam NetworkManager: <info> prefix 24 (255.255.255.0)
    Feb 26 02:39:25 Sarvam NetworkManager: <info> gateway 192.168.1.1
    Feb 26 02:39:25 Sarvam NetworkManager: <info> nameserver '167.206.254.2'
    Feb 26 02:39:25 Sarvam NetworkManager: <info> nameserver '167.206.254.1'
    Feb 26 02:39:25 Sarvam NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
    Feb 26 02:39:25 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
    Feb 26 02:39:25 Sarvam NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
    Feb 26 02:39:26 Sarvam NetworkManager: <info> (wlan0): device state change: 7 -> 8 (reason 0)
    Feb 26 02:39:26 Sarvam NetworkManager: <debug> [1267169966.595494] periodic_update(): Roamed from BSSID 00:1D:7E:4E:C1:D7 (linksys) to 00:13:10:43:D7:DE (linksys)
    Feb 26 02:39:26 Sarvam NetworkManager: <info> Policy set 'Auto linksys' (wlan0) as default for routing and DNS.
    Feb 26 02:39:26 Sarvam NetworkManager: <info> Activation (wlan0) successful, device activated.
    Feb 26 02:39:26 Sarvam NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
    Is the wireless router i got a dud, being refurbished i took my chances and maybe i wasn't so lucky..! Or is it something wrong in my network settings..? I tried shutting down everything and then turning the modem, then the router and finally the PC without the ethernet cable connected. Still I am unable to connect.
    Any help is deeply appreciated. I am a total newbie in networking...!
    Last edited by jaydoc (2010-02-26 07:57:15)

    Router Status
    Hardware Version WPN824v3
    Firmware Version V1.0.7_1.0.8NA
    Internet Port
    MAC Address 00:1E:68:12:EB:1C
    IP Address [i]edited[/i]
    DHCP DHCP Client
    IP Subnet Mask 255.255.252.0
    Domain Name Server 167.206.254.2
    167.206.254.1
    LAN Port
    MAC Address 00:1F:33:FF:97:FF
    IP Address 192.168.1.1
    DHCP ON
    IP Subnet Mask 255.255.255.0
    Wireless Port
    Name (SSID) jaydoc
    Region United States
    Channel 1
    Mode b and g
    Wireless AP ON
    Broadcast Name ON
    that is what my router status is at the moment. and I am able to connect to the wired network using the router. However I still cannot connect wireless. I did not see any settings in the wireless settings page of the router that ask for DHCP server names/addresses. This is the current logfile output
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) starting connection 'Auto jaydoc'
    Feb 26 08:30:36 Sarvam NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 26 08:30:36 Sarvam NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 2548 (expected 0)
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 26 08:30:36 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: completed -> disconnected
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 26 08:30:36 Sarvam NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0)
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0/wireless): connection 'Auto jaydoc' requires no security. No secrets needed.
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Config: added 'ssid' value 'jaydoc'
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Config: added 'scan_ssid' value '1'
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Config: added 'key_mgmt' value 'NONE'
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 26 08:30:36 Sarvam NetworkManager: <info> Config: set interface ap_scan to 1
    Feb 26 08:30:36 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning
    Feb 26 08:30:37 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
    Feb 26 08:30:38 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associating -> associated
    Feb 26 08:30:38 Sarvam NetworkManager: <info> (wlan0): supplicant connection state: associated -> completed
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'jaydoc'.
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
    Feb 26 08:30:38 Sarvam NetworkManager: <info> (wlan0): device state change: 5 -> 7 (reason 0)
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
    Feb 26 08:30:38 Sarvam NetworkManager: <info> dhcpcd started with pid 2730
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
    Feb 26 08:30:38 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
    Feb 26 08:30:38 Sarvam dhcpcd: version 5.1.5 starting
    Feb 26 08:30:38 Sarvam dhcpcd: wlan0: rebinding lease of 192.168.1.115
    Feb 26 08:30:38 Sarvam NetworkManager: <info> DHCP: device wlan0 state changed normal exit -> preinit
    Feb 26 08:30:48 Sarvam dhcpcd: wlan0: broadcasting for a lease
    Feb 26 08:31:23 Sarvam NetworkManager: <info> (wlan0): DHCP transaction took too long, stopping it.
    Feb 26 08:31:23 Sarvam dhcpcd: received SIGTERM, stopping
    Feb 26 08:31:23 Sarvam dhcpcd: wlan0: removing interface
    Feb 26 08:31:23 Sarvam NetworkManager: <info> (wlan0): canceled DHCP transaction, dhcp client pid 2730
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) scheduled...
    Feb 26 08:31:23 Sarvam NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 2730 (expected 0)
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) started...
    Feb 26 08:31:23 Sarvam NetworkManager: <info> (wlan0): device state change: 7 -> 9 (reason 5)
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Activation (wlan0) failed for access point (jaydoc)
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Marking connection 'Auto jaydoc' invalid.
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Activation (wlan0) failed.
    Feb 26 08:31:23 Sarvam NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Timeout) complete.
    So if its still a DHCP problem, it seems to be affecting only the wireless part. How can I make wireless use the same DHCP servers as the wired..? Or is there something else wrong here..?

  • Home wireless network in China using Airport Express ?

    I am going to be living in China with my Macbook. I will be bringing my Airport Express with me.
    I would like to know whether it is appropriate to connect up my Airport Express to a Chinese cable modem to obtain wireless internet access at home.
    Or is it a very different system used in China for home wireless network.

    Many, but not all of the same wireless channels in the US are allowed in China. See this Wikipedia Document for some information.
    As to whether you will connect using ethernet or PPPoE, etc., that will depend on the provider that you choose.

  • Apple devices will no longer recognize home wireless network

    After returning from a week's vacation, I am having difficulty getting my Apple devices (iPads, iPhones, MacBook Pros, etc.) to connect to our home wireless network. I have tried resetting the router and modem numerous times, restarting the devices, resetting the IP address on the MacBook Pro to no avail. At time I do show a connection to the network, however, I cannot access internet, email, etc. This problem also seems to be affecting ALL of our Apple devices, including the ones we left at home. The PC laptop connects just fine, so it does not seem to be a router issue.  Any thoughts?

    Have you called the ISP's tech support line and asked for help?

  • Suddenly can't connect to home wireless network

    All of a sudden I can't connect to my home wireless network - always has worked perfectly.  Now I get a box asking for the password, and although I type it in correctly it keeps saying "incorrect password."  I thought I'd delete it and re-establish it, but it doesn't show up in the Managed Network settings.  Any ideas what is going on?

    On the problem computer, go to Control Panel > Printers and delete all instances of the printer.
    Next, print a Wireless Network Test from the front of the printer (Network menu).  Note the printer's IP address.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MacBook Pro only can't find home wireless network

    Hey guys!
    I purchased a 15" retina MacBook Pro by July. It brought Mac OS X Lion with it: I had no problems.
    However, more than a month later I upgraded to Mountain Lion, and I started to have the same problem ALWAYS: sometimes I would be connected to my home wireless network, perfectly fine. However, after shutting down, sleeping, etc, whenever I would turn the Mac on again, it wouldn't find my home network wireless anymore, but it would find e.v.e.r.y and other network available. Also, my phone, iPad, and every other equipment, would find it and work perfectly. After several restarts and wake ups from sleeps, the Mac would eventually magically find it and stay connected for an unpredictable amount of times (sometimes it could find it continuously for some days after some sleeps, and sometimes it wouldn't be found again after some hours of it being found again (assuming the computer went to sleep)). But if I try any other of the available networks it connects with no issue!
    And I've been in this game constantly! I've tried (almost) all the Mountain Lion wifi-related posts in the Internet, but none seems to solve it.
    I have only found a few posts with my related issue, which I recall: the Mac won't find, ONLY, my home network, while any other equipment can, and it can magically find it occasionally, lasting its connection until the next sleep or shut down.
    Help would be really appreciated.
    Thank you,
    Juan

    Hum, good point, the problem may lay with the router compability. My sister, who has ML as original OS has been having the same problem of not finding only our home network, so it seems that the problem lies on Mountain Lion compatibility with the router. I just restarted the router several times and we both got internet at the same time. The question is, as always, how long will it last until it won't find it again.
    Now, focusing on the router.
    Here, in Portugal (as for the rest of the world I don't know), the Internet provider companeis offer their own modems. Not only that, as those modems are both: modems and routers ( http://imageshack.us/scaled/landing/149/ofibrasjaestaabombar.jpg ).
    After writting the above, and re-reading what you said, you lighted me up the idea of entering the modem domain (you know, that url you put and have access to every definiton of the router?)
    Well, the password "type" was selected to "WPA and WPA2". What I did was selecting "WPA2" only. So far it seems that it is working. I'll do some restart tests etc etc and I'll let you know! (Maybe the problem may persist, but I'll only know days from know as it may seem, for know, that it is solved.)
    I'll let you know, and thanks for the help so far, Sig!

  • On an M425dn, I am unable to setup scan to network folder on a home wireless network

    On an M425dn MFP, I am unable to setup 'Scan to Network Folder' on a home wireless network. The network folder exists and has been set to share with full permissions for everyone. The OS is Windows 7. The printer IP address is 192.168.1.104. I have used this in a browser to access the setup tab called Scan. I have established a network folder and have attempted to test the setup folder multiple times. The tests end in one of two ways. The attempt spins endlessly which requires a cancel action or it ends with the following error: "Cannot connect to the network folder. Ensure the shared folder name is correct." The network folder does indeed exist.
    The computer name is Delta. The shared folder name is Images on my A: drive.
    So the network path entered is \\DELTA\Images. By the way, printing to this network printer is always a succesful operation. Any guidance to solving this dilemma will be greatly appreciated. Thanks in advance.

    Google may have "locked" IMAP and/or POP access to your account. To unlock it go here:
    https://accounts.google.com/b/0/DisplayUnlockCaptcha
    Then try setting the account up on the phone again.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • MacBook Pro Can't find home wireless network

    I've been having some issues getting my macbook pro, running OS 10.7.5, to find my home wireless network. The network doesn't show up when it searches automatically, and when I type the network name in to find it manually, it says no network found. The computer connects to all other networks and finds then with no issues, and other MacBooks are able to find my home network and connect to it again with no issues.
    The computer used to be able to find the network, and then it just stopped working. I have tried all the standard fixes, resetting the router, computer, PRAM, forgetting the network, deleting the key from keychain, but nothing seems to work. I tried googling the issue, but wasn't able to find a problem similar to the one I have.
    Any advice would be greatly appreciated.
    Thanks

    Still having problems with this.
    I have upgraded to Mavericks, hoping that the problem would be fixed, but it hasn't. I still get all networks completely disappearing - even if I search for them they are not found.
    But I reboot the computer and it works! But when I am in OS or Bootcamp mode and put the Mac to sleep, it does not see the networks again! I have to reboot the computer for it to work.
    I have even got a new router which can receive the b,g and n signals etc. as I was told by a Mac techie here that Macs 'look' for the n signal but can also work with the b and g signals and THAT maybe my old router only transmits b and g or something like that .
    This, to me, sounds like a Mac software problem. I had a similar problem on a previous Mac on my "old router" and a totally different router in a different country's telephone system.
    I now have the same problem with a new MBP on a new router!
    Maz

  • I have 2 macs and 2 PC laptops in my home wireless network.  Can I use the Airport/Time Capsule hard drive to back up all 4 machines?  I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

    I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport).  I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers.  Is this possible?  Could someone help me by telling me how to configure it?  I know I will have to use different backup software in the 2 Windows 7 Laptops?  Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image?  Thanks in advance for the help

    It is your fault, pondini.. all your fault.
    I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
    I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
    I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
    A product like clonezilla, Free linux boot cd.
    http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
    Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
    My bet is that it will kill TM .. but you could be right.
    It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

  • I would like to add my Deskjet F4480 printer to my home wireless network. How can this done?

    I have a Linksys wireless router that is the hub of my home wireless network.  I have been successful in adding a HP OfficeJet 6500 All-in-one Printer an old HP DeskJet 890C that I purchased in 1997 with a computer running Windows 95.  The HP 890C has been my tireless workhorse throughout my two kids K-12 school as well as printing reams of paper during my MBA...and guess what: it still works.  However, my daughter has just returned home from college and she has a HP DeskJet F4480 printer/scanner that she would like to add it to the home network.  I have been researching the problem, but haven't been successful in finding out if this printer is compatible to add to a wireless network.  Or simply, will a 802.11g Wireless USB 2.0 Adapter suffice?  I am also adding a new Windows 7 laptop in the network, that will need to print to this F4480.  I patiently await the forum's response.

    My mistake, it seems that price was a deciding factor when I purchased the F4480 in lieu of a more expensive wireless ready printer-scanner.  I will eventually come-up with a solution as I did with the 890C where I have a wireless print server connected directly to the printer serial connection.  It seems that backward compatible is still evident, but I am having some problems coming up with the long-lasting HP49 and HP23 tri-color ink packs. 
    Here is the rub; I don't replace technology because it is out-dated. I upgrade and or repair everything myself. I found warranties not worth the paper their written on and in most cases, the technical support was lacking.  My Win95 desktop went thru several major components until I found that it was becoming harder to find software to run with it.  I finally replaced it in 2007.  Now it seems that there has been a paradigm shift toward utilities that are very hungry for memory, and even if I didn't want to, I am forced to come over to the dark side with a device that has a minimum of 8GB of RAM. 

  • Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

    Hi,
    I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
    Your help is really appreciated"

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • Setting up HP Officejet 6500A; not sure how to connect to web w/ home wireless network

    I have a small home wireless network.  I set the printer up today but it says that I must connect to the internet (fax part is working).  The only desktop I have, I keep off most the time and just use my laptop (which is for work so I can't set the printer up to this).
    Is there a way to connect the printer directly to my router?  They are only a few feet from one another; however, I have no clue how to do it and the instructions manual didn't tell me much.  Do I need a phone line?  What would I use to connect the two?
    This question was solved.
    View Solution.

    Use an Ethernet cable, available in any tech store, online or even Target will have them.
    Plug it into the back of the printer and router.  You should be able to add the printer to your laptop.  Let me know what operating system you have and I can help.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • How to Use Sequence Object Inside User-defined Function In SQL Server

    I'm trying to call sequence object inside SQL Server user-defined function. I used  Next Value for dbo.mySequence  to call the next value for my sequence created. But I'm getting an error like below. "NEXT VALUE FOR function is not allowed in check c

  • F.05 - Revaluation posting are not clearing in GL Account (Gr/Ir)

    Hi Gurus, We have FX revaluation issue. After execution of F.05 - the system performs an automatic reversal of the postings for the GRIR account on the first posting date of the new month but there is no valuation posting last posting date (month end

  • Emails in BPM

    Hi Experts, How to send Email to user by using BPM? I have a problem , when mapping realted error occurs then, i need to send  a Email to the user. how to do this? Thnx RAMS

  • IWeb tells me there is a missing file/document (one I supposed am linked to

    EVERY time I open up iWeb it bring up a screen saying there is a missing file (a document that I guess I've linked to). The problem is that I can't find the post in my blog where I'm supposedly linking to this file. I've checked every post in my blog

  • Cannot get subtotal text in ALV

    Hi all, I cannot get the text for my subtotal. Anyone have any idea? & Report  ABC& REPORT  ABC. after getting data*   SORT lt_manpower by gsber landx50 bukrs.   PERFORM set_header.   PERFORM set_fieldcatalog USING alv_fieldcat.   alv_layout-colwidth