Strange iChat problem, need assistance.
Since My girlfriend had a system and a quicktime update somewhere last 2 weeks, we have a problem with the videochat.
Her system is Leopard version: 10.5.6 and quicktime version 7.5.7
My system is Tiger version: 10.4.11 and quicktimepro version 7.5.5
We do not have connectionproblems but I do not recieve her video, only the sound.
She does see and hear me, but I do only see myself.
It looks like I only see my mini display, normaly placed in the display where you see the the one you are chatting with.
When I do a full screen, I only see myself also.
On the connection infoscreen, we both have a 100 % audio and video.
We both are on a wireless router but this was so when it worked, and nothing changed there.
We went through all the ports and firewall settings found in this forum about connection problems and set it accordingly, although it does'nt really aply to
our problem.
Before it worked without any settings changed.
I do think that the problem is on her side, because I did not have any updates since.
And also, because of this problem, we are forced to switche to skype, and her camera was'nt recognised at first, and it took a view tricks to make it work.
But her camera is working fine it seems.
The only thing not done yet, is deleting iChat preference files or so.
Does anybody know what to do ?
Hi
First have you both set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps
In ichats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Similar Messages
-
Strange iChat problem, please help.
I just bought a macbook with Mac OS X 10.4.10
It has iChat AV 3.1.8 on it. The problem is kind of strange to me. The problem seems to be intermittent. When it works it works fine. But when it doesn't pretty much doesnt show who is online correctly everytime I logout and then log back in it shows completely differnt people online. Sometimes it doesnt show anybody online. Also if i try to chat the message i send goes the intended person however it doesnt show on my screen that i have sent nor does it show the replies i get from the message. It only shows that they reply if i logout. Kinda of like the information is there but its not displayed until i logout of iChat.Hi,
Short Answer: It works.
Long answer:-
It's not so much that there is anything wrong with port 5190.
It is more to do with what manufacturers are now doing with "features" for their modems and routers.
Nowadays some ask you to specify port AND Protocols when port Forwarding.
routing devices have never allowed a port to be forward twice (normally to two different computers) but iChat uses both the UDP and TCP protocol on port 5190 and this seems to upset some devices.
Now iChat logs on to the AIM servers on port 5190 (normal default for any AIM based client). It does this on the TCP protocol.
Now AIM and iChat use the port 5190 on the UDP protocol for running group chat/chatrooms and file sending (this includes those files and pics you send in Text chats).
If you send files and pics in a 1-1 chat iChat makes the Chat a Direct chat (Peer to Peer on port 5190 UDP)
So if you and your Buddy are trying to do this and one of you has a routing device that does not like port 5190 being used twice you can see the problem.
You can log on to the AIM server and virtually any port.
We suggest that you pick one below the 1024 threshold (which is where the above problem will occur and hence we suggest port 443 as it is normally used for secure mail.
10:50 AM Friday; August 31, 2007 -
Hey guys, I could really use your help. I've been trying to get iChat AV to work for some time now. I'm running ver. 10.4.11 right now and have been having the same problem most everyone else has. It simply won't connect. I'm running off of a linksys wireless router and have comcast digital cable.
I tried adding the test accounts to test it out, but for some reason, they don't show up as "Online" when added as an AIM account. However, when I add them as a .mac account, they show up, and my video chat works perfectly. It connects, I watch the short commercial, and then I disconnect.
Any help you guys can give me would be greatly appreciated. I've gone through the discussion boards and looked at a lot of similar problems. I've tried some of the solutions given but none seem to work. Thanks again!!!Hi,
Welcome to the Discussions
IT does seem that the AIM versions of the iChat Test accounts are more Off line than On-line at the moment. The @mac.com names do appear to be the ones to use.
For Comcast you will need to change the System preferences > Quicktime > Streaming to 1.5Mbps and relaunch iChat if Open AND .......
Then go to iChat menu Preferences > Video section > Bandwidth Limit and change that to 500kbps (this does not need a relaunch)
This should help get around the Comcast Data Stream Management.
YOu will need to access the Linksys' set up pages.
Go to Administration and Enable UPnP
The Go to Security and make sure
1) the Firewall is Off and
2) The Item About Blocking or allowing Response to Internet or Anonymous Pings is set to Allow them (iChat sends a Ping)
(Save Settings)
9:16 PM Thursday; February 12, 2009 -
when i change my status on ichat to away or put a custom away message up my computer displays me as away. on my buddies computers it says i am available still and it never tells them that i have an away message up, PLEASE HELP
Quote from: flobelix on 15-September-12, 22:46:27
Yeah that's what I thought... How (means what are you setting)?
Can you clarify? do you mean my voltages, NB-CPU setting, and CPU multi? if so, let me give you the settings for a 3.60GHz OC run
1.Cool n quit is disabled
2. C1E is disabled
3.CPU FSb is 240
4.CPU multi is 15x
5.CPU-NB ratio is set at auto which is 10x and it's currently at 2400 Mhz
4.turbo is disabled
5.unlock CPU is disabled Advance CC is disabled
6.CPU core control is set to auto
7.OC genie lite is disabled
8.FBS/DRAM is 1:3:33 to prevent overclocking above 1600 Mhz
9.HT link is set to auto which is 10X (I know some people say to keep this below NB clocks, but results are the same no matter if i set it lower or not)
10.all voltages are set to auto (I have messed around with them in the past to no prevail, but i'm just giving you an example)
Also, i'm not trying to start an argument and get help at the same time, but the reason why I said BIOS in response to your question is because, a lot of people use a switch or a software to overclock, when you asked "how" I thought you meant the method. So... sorry. -
HUGE PROBLEM, NEED ASSISTANCE PLEASE
So I wanted to completely erase my drive; I backed up my drive first, and when I was ready, I went into Recovery Mode via command-r on restart. I went into Disk Utility, selected the partition, and hit Erase. A message popped up saying that the disk was encrypted (which it was, I used FileVault) and I entered my password, and then some error message popped up and my partition just vanished. I assumed that I had erased the partition like I wanted, but then when I clicked on the drive to create a new Partition, it reads, "This partition contains a locked disk and can not be resized until it is unlocked." I can't do anything with the drive now...
When I restart, it brings me to the login screen (the one after you encrypt your drive with FileVault). When I type my password in, it starts to boot, but then the Apple logo turns into a "Do Not Enter" symbol. I go back into Recovery Mode and nothing changed...
I did some searching around and I read that there is a way to manually unlock the drive through Terminal in Recovery Mode. I did EXACTLY as the steps explained...
1. Type in: diskutil coreStorage list
2. Copy the UUID
3. Type in: diskutil coreStorage unlockVolume xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
But then I get a line that reads something like, "This is not a logical storage UUID"
I've search around but I can't find any solutions... what can I do!
Help would be VERY MUCH appreciated!!!The option to upload a picture doesn't appear on my iPhone, I'll just have to describe it as best as I can for now...
So there's the Disk Utility window, right? On the left side of the window there's the sidebar, in the side bar there are the items "Macintosh HD" "SuperDrive" Then a dividing line... "disk1" and a subitem called "Mac OS X Base System"
Unter "Macintosh HD" and on the Parition tab everything is greyed out. Unter partition Layout: the drop down menu is greyed out. The big partion window is greyed out, but it says, "Macintosh HD" in the center. Under that are the "+" and "-" buttons and "Options..." are all greyed out.
Under Partition Information, the Name "Macintosh HD" is greyed out. Format "Mac OS Extended (Journaled)" is greyed out. Size: "255.2 GB" is greyed out
I have a DVD and a USB with Mountain Lion on it. I also have a USB with Disk Recovery Assistant. Would either of those help? -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My wife was given a 5s and she sent her 4s to her daughter in Thailand to use. The problem is the 4s needs to have the imei number unlocked. We need assistance on how that can be done. We are long time Verizon customers.
Your daughter will have to send it back to you. You will have to reactivate it on you line. You will then have to request to have it unlocked. See THIS thread for more information.
-
IMac 600 SE - strange power/video problems - need motherboard?
Hello all,
Got this "project" iMac, have no knowledge of its history. Here's what's going on:
When I first got it, it would take 3 or 4 tries for it to fully boot up, on the first try it would shut off after a second or two, the next try it would get a little further along before shutting down and finally on the 3rd or 4th try, it would boot up completely.
Initially, it had a dim display and a bunch of wavy horizontal lines, like a TV with bad reception using a "rabbit ears" antenna. The person I got it from said from what he had learned, he thought it was a power supply problem.
So I replaced the down converter/power supply with a spare one I had leftover from a previous motherboard replacement, which made no difference at all, same problems.
So I then checked the firmware, which was the latest version (4.1.9). Then I did a PRAM reset, which helped, followed by a PMU reset. I did the PRAM reset several times when problems cropped again, and have done the PMU reset twice, resetting the clock both times.
The shutdowns on boot up have disappeared, but it will occasionally shut down out of the blue after being on for awhile now. The horizontal lines have disappeared, but it now has a strange video problem:
The geometry of the screen is off-kilter by default, so when I go into System Properties to reset the geometry there, and I use the "Rotate" command to correct the overall incline in the display from right to left, the display gets dimmer, and sometimes the horizontal lines reappear, usually on the right side of the screen. When I click on "Factory Defaults", the display gradually brightens again, and if horizontal lines are present, they disappear. This phenomenon doesn't appear to occur when I adjust the display height and position, only with the "Rotate" command, rotating it counter-clockwise. I believe the iMac even shut down once when I was doing this.
I have also noticed an occasional higher-pitched "whine" on boot up, which usually results in an eventual shut down.
So, are these problems symptomatic of a bad motherboard or a bad video board/card? Since I have the latest firmware and have tried both PRAM and PMU resets, and the occasional random shut down still occurs, it makes me think it's a hardware problem.
I just need some feedback here before I purchase a replacement motherboard.
Also, can the video board/card be replaced separately?
Thanks for any ideas/suggestions/help!
iMac 600 SE Mac OS X (10.4.3) 600MHz, 384MB RAM, 40G HD
iMac 600 SE Mac OS X (10.4.3) 600MHz PowerPC, 384MB RAM, 40G HDflaash...
In your situation I believe 2 components need checked first. PAV board and the CRT. Or essentially anything shared by the 2 items, such as the CRT yoke/gun board.
As far as the logic board goes, the video chip-set is part of it (soldered in) and not repairable. Those parts rarely "weaken" (normally just die) so I would be less likely to suspect them.
...Ron -
Converting PDF file back to word need assistance please, have adobe reader 11.0.10
Need assistance converting PDF documents back to Word format, have adobe Reader 11.0.10 will this work and directions please
Sadly no. And strange thing is that only this pdf file have problem with saving sigh...even if I told him to send again still can't save this file...my classmate doesn't have this problem :I for this pdf...but only me specifically on this pdf...it go cray cray (crazy)
-
D-Link DIR-615 and iChat problem
I had a netgear previously, but it broke after a year so I bought this D-Link. I never had any problems with iChat, but now I get disconnected from iChat every few minutes. Any thoughts?
OK,
Pings.
To Ping someone or an IP is to use the computer or router to send a Sort of "knock knock" request to the IP or server/computer name.
On most devices you can Ping other devices on your LAN as there is no block to this.
A lot of devices though, have this disabled for the WAN (Wide Are Network + Internet) side of things.
This keeps the Public IP your ISP gives your Modem somewhat secret.
Like most things on the internet it an be abused.
The Network Utility in Applications/Utilities has the ability to send Pings.
The normal function is to send 10 pings and see if any get lost and to see how long they take to get a response.
You will see that there is an option to send Unlimited Pings. It is this that gets abused. There are ways of sending many pings very quickly as an Attack.
This can result in your Internet connection failing as the device or computer get tied up dealing with the Pings.
On the other hand certain apps like iChat use a Ping to confirm that it is the correct place/computer is is talking to.
For iChat it works like this.
One end send the Visible Invite (The Pop up to Invite to an A/V Chat).
This is sent by iChat on Port 5678
iChat then moves to port 16402 to do the Connection Process using the SIP (Session Initiation Protocol).
Part of this process is to send a Ping to confirm where the Visible Invite went to is the place/computer that is responding to the SIP Request. As you can be logged in twice to a Screen Name it confirms that the you are responding - It also stops someone eavesdropping and pretending to be you.
iChat will not work in A/C Chat unless this function is Allowed.
*Denial of Service (DoS)*
This is somewhat of a hang over from the days when groups of "Hackers" used to organise a time to bring down a web server.
Lots of people would all go to the same web site (requesting a page)
Then they would hit the refresh button over and over (Many Request for the page).
eventually so many requests are made that the web server cannot cope and the whole server would "go down" and lose it's Internet Connection.
Strictly speaking it does not have to be application related like a web server/page but has to involve the computer doing something to reply.
With DoS (if your device has it) it has a preset threshold where it will regard the data coming to your computer as being "Too Much, Too Quickly", and cut the one port the data is coming in on.
With iChat Video there is a vast amount of data that can come very fast with modern Internet Speeds and you bump into the Threshold even before you see your Buddies Video pic.
There is no way to adjust the Threshold so it needs to be Disabled for iChat to work.
*Stateful Packet Inspection (SPI)*
Works in a similar manner to DoS in that it tries to Inspect the incoming stream and judge if it should be allowed. With modern speeds there come a point when it cannot cope and it again shuts the port it is happening on to "Protect" the whole Internet Connection.
Again for iChat it needs to be Disabled if you have it.
Limiting iChat to use only 500kbps of your Bandwidth (a portion of your Internet speed in most cases) may get around the Threshold of DoS and help SPI cope.
There are some risks to Disabling these settings but mostly this depends on how big a target you appear to be on the Internet.
There is a smaller risk of suffering drive by attacks. However I have never suffered one in 5 years of using iChat.
I have not suggested changing any of the other settings in your device.
7:55 PM Thursday; July 1, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Tried to reinstall PS CS6 from download, will not load after download and install, need assistance
I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John -
Compiling a driver, need assistance on kernel source configuration
Hello BBS.
I am compiling a module for the Asus PCE N53 wireless pci-e card. I have obtained the driver source, and followed the instructions, and have gotten to the point where I need assistance. The instructions requires the kernel source, i have successfully obtained and configured it using the Command line prompt, except for one feature. I need to enable the intel IPW2200 driver code in the kernel source for this driver. What procedure do I follow to enable it?> I know in face value, that my request may seem odd. I just need to use the source of the kernel, not a new kernel... I have found that what I am requesting... will fix the problem, based on a Gentoo solution: http://forums.gentoo.org/viewtopic-t-93 … art-0.html. Needing to know how to configure the kernel source to enable the intel driver still stands. The source I am using is the latest arch kernel source.
===============
RT5592 Linux Driver quick start
====================
Check tools:
====================
*Before install driver, please check already install compile tool and kernel source code
1>Install compile tool
$yum install gcc-c++
2>check kernel source code exists /usr/src/kernels/ "kernel name"
Download your kernel source code
*http://www.kernel.org/pub/linux/kernel/
or
$yum install kernel-devel
====================
Build Instructions:
====================
1> $tar -jxvf DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x.tar.bz2
go to "DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> $wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> $wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code, need administrator.
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $make install
#install driver
#copy RT2860STA.dat to /etc/Wireless/RT2860STA/RT2860STA.dat
6>$vi /etc/rc.d/rc.local
#input "ifconfig ra0 up"
$reboot
7> unload driver
$ifconfig ra0 down
$rmmod rt5592sta
======
Heres the output of my error, when I compile:
=======
make -C tools
make[1]: Entering directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools/bin2h
cp -f os/linux/Makefile.6 /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/Makefile
make -C /home/white/linux-3.2.9 SUBDIRS=/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux modules
make[1]: Entering directory `/home/white/linux-3.2.9'
WARNING: Symbol version dump /home/white/linux-3.2.9/Module.symvers
is missing; modules will have no dependencies and modversions.
CC [M] /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: error: unknown field ‘private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: initialization from incompatible pointer type [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: (near initialization for ‘rt28xx_iw_handler_def.get_wireless_stats’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: error: unknown field ‘num_private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:2: error: unknown field ‘private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: error: unknown field ‘num_private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
make[2]: *** [/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o] Error 1
make[1]: *** [_module_/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux] Error 2
make[1]: Leaving directory `/home/white/linux-3.2.9'
make: *** [LINUX] Error 2
Last edited by confusedoldman (2012-12-25 20:14:34) -
Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HIHi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod -
Host Not Responding and Needs Assistance
I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details -
I need assistance to install LabView MindStorm NXT module in a Desktop system with Win XP and a Laptop with Win7. Both are 32 bit with all service packs applied. I purchased the academic version from a company called On-The-Hub.
Attempted to install but seems to reject my serial number?Hi Rob,
Thats really strange because the NXT Module 2010 and the NXT Module 2011 are free and don't require serial numbers. Where did you obtain the installer? The core LabVIEW installer requires a serial number but if you already have that installed, the NXT Module is just a free addon. Here are the links to the module for LabVIEW 2010 & 2011
NXT Module 2011 : http://joule.ni.com/nidu/cds/view/p/id/2637/lang/en
NXT Module 2010: http://joule.ni.com/nidu/cds/view/p/id/2551/lang/en
Maybe you are looking for
-
Issue in Addition of attribute column in VO
Hi All, I have a custom VO in which dependent on custom EO which requires a extra attribute to be added. i added that attribute in both EO & VO. But changed the definition of page to add this extra field to accomdate the extra attribute, im getting b
-
Logical standby apply won't apply logs
RDBMS Version: Oracle 10.2.0.2 Operating System and Version: Red Hat Enterprise Linux ES release 4 Error Number (if applicable): Product (i.e. SQL*Loader, Import, etc.): Oracle Dataguard (Logical Standby) Product Version: Hi!! I have problem logical
-
My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port, Anyone else have this problem?
-
I have a 1.25Ghz G4 MDD with 1.5GB of RAM. I am trying to install 10.5 from a full retail version DVD on my machine and I can't get it to work. The first time, I let it run and while I was a away doing other things and when I came back to check on it
-
Office2013 installation problem
i was using office 2013 and i uninstalled it and now i wanted to reinstall but when i try to install, a pop up with message "error performing inpage operation" appears. i'm really stuck, and i want u guys to fix this problem for me.