Strange icon behavior

Since purchasing an iMac with Snow Leopard pre-installed, I've experienced a series of strange ‘icon bugs’, and the problem has persisted through to the latest 10.6.4 update.
Bug #1: Occasionally icons on the desktop will become pixelated and blocky, resembling MacOS 9 sized icons that have been over-magnified. If I restart the Mac or log out and back in again the problem will go away, at least until the next random occurrence. The problem seems to particularly affect icons for inserted CDs and DVDs, but I’ve also seen it occur with application and file icons.
Bug #2: Sometimes icons will disappear completely by becoming transparent. This has affected all kinds of file types, but particularly files that have been freshly downloaded to the desktop from Safari. I can resolve the problem by dragging the affected file into a freshly created folder and then back onto the desktop, at which point the icon reappears.
Bug #3: About 50% of the time I insert a USB thumb drive or mount a DMG disk image, the icon displayed on the desktop will be for a hard drive (i.e. the one used for the internal hard drive) and not the white icon normally used for mounted images.
These bugs only occur on the desktop. They never occur in other folders or in list view. I cannot isolate the cause to any particular task or process. Sometimes they happen immediately after a re-boot.

Create a new User go to System Preferences > Accounts > "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try going to Users/yourname/Library/Preferences and move com.apple.desktop.plist and com.apple.desktopservices.plist to the trash. Restart and test. You may have to reset some Desktop settings.
If that didn't work, start up in Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Desktop icons function correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to/Users/yourname/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving/Users/yourname/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If the issue is systemwide then, you may be able to repair this with the The 10.6.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Similar Messages

Strange icons behavior on Finder and Dock

Hi!
I’ve purchased a new MacBook and am in the process of transforming my old iBook G4 into a sort of netbook for Web and iWork but am having some strange problems.
This notebook served me very well for several years but I decide to clean it after the migration of all my content to the new MacBook.
First I formatted and reinstalled Leopard on it. Then I performed all the OS online updates and finally installed iWork/iLife and also performed the online updates for these Apps. After that I activated MobileMe, imported all my data and began to download Apps like Evernote, Skype, etc.
After downloading some Apps I started to place their icons on the Dock but for some reason they simple disappeared after some seconds. Went to the web and found some tips to delete the Dock "plist" and some other files. Did that, perform a restart, but that didn’t work for me.
Since everything was new I decide to create a new user and test the Dock. It worked fine in the new user (without MobileMe activated) but then some other strange thing happened. The icons of installed Apps are not appearing on the Finder, though they were there in the deleted user. If I search for them with Spotlight they are there (in the Application folder!) and I can even drag them to the Dock, but for some reason they are not in the Finder window itself.
I remember selecting “install in all users” when installing all the Apps, so this cannot be the problem. Other interesting thing to notice is that if I search for a App with Spotlight, drag it to another place (out of the Application folder) and then move it back to the Application folder, the icon appears on the Finder window.
My questions are: Does anyone know what can be happening? Should I start all over reinstalling Leopard?
Thanks!

vladcampos wrote:
Hi!
I’ve purchased a new MacBook and am in the process of transforming my old iBook G4 into a sort of netbook for Web and iWork but am having some strange problems.
This notebook served me very well for several years but I decide to clean it after the migration of all my content to the new MacBook.
First I formatted and reinstalled Leopard on it. Then I performed all the OS online updates and finally installed iWork/iLife and also performed the online updates for these Apps. After that I activated MobileMe, imported all my data and began to download Apps like Evernote, Skype, etc.
After downloading some Apps I started to place their icons on the Dock but for some reason they simple disappeared after some seconds.
this is a very common mobileme issue caused by corupt sync data. turn off and reset mobileme syncing
http://support.apple.com/kb/HT1497
Went to the web and found some tips to delete the Dock "plist" and some other files. Did that, perform a restart, but that didn’t work for me.
Since everything was new I decide to create a new user and test the Dock. It worked fine in the new user (without MobileMe activated) but then some other strange thing happened. The icons of installed Apps are not appearing on the Finder,
I don't understand what you mean by this.
though they were there in the deleted user. If I search for them with Spotlight they are there (in the Application folder!) and I can even drag them to the Dock, but for some reason they are not in the Finder window itself.
which finder window?
I remember selecting “install in all users” when installing all the Apps, so this cannot be the problem. Other interesting thing to notice is that if I search for a App with Spotlight, drag it to another place (out of the Application folder) and then move it back to the Application folder, the icon appears on the Finder window.
My questions are: Does anyone know what can be happening? Should I start all over reinstalling Leopard?
Thanks!

Strange Icon behavior: PDF files now show an iPod Icon

A week or so ago, the icon for PDF files on my G5 (10.5.5) switched to become the icon for an iPod. All PDF files now look like iPods. If only I had so many iPods!
Waaaaaay back, one would "rebuild the desktop" and it would correct many icon problems. I don't know what to do these days.
Any ideas what this is about?

It might be that the LaunchServices database is corrupt and needs rebuilding. Launch the Terminal app, copy & paste in the below command, hit the return key, quit the Terminal app, restart, and check the icons on those files:
*/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user*

Capturing DVCAM in FCP 6.0.2 and encountering strange capture behavior

I have FCP 6.0.2 and OSX 10.5.2 and QT 7.3.1. I have been capturing several DVCAM cassettes using my Sony DSR-20 deck. Although I have done this countless times before in earlier versions of FCP, I am encountering some strange repetitive behavior. I am capturing 30 minute clips one at a time. When I use batch capture it will cue the tape up properly to the in point...and then start capturing until it gets to about 10-12 minutes in, and then capture unexpectedly stops, no dialogue box, the tape rewinds and starts capturing again from the original in point. On this second capture, the tape sails past the 10 minute mark and keeps going to the end of the 30 minute clip. It then stops, gives me the dialogue box that it has successfully captured. And it has.
But every DVCAM tape I captured today exhibited the same behavior. Capture would be successful until about about 10 minutes in, then FCP aborts (no dropped frame message, no dialogue box) rewinds the tape back to the in point, tries again, and this time succeeds with the second pass capturing the entire clip. Note at the 10 minute mark there is no scene change or no camera start/stop.
Have other users experienced this issue? And if so, is there a workaround or a possible patch forthcoming from FCP?
Many thanks,
John

Yes, each tape has an in and out point defined. In my 6 years of editing with Final Cut and DVCAM tapes I've never encountered this issue before in the capturing process until now. I will have to see in future weeks with other captures whether this is an on-going issue or not, but at least I can capture for now.

Bug in my code or strange memory behavior ?

Hi, Guys !
It's been a while since I post something in this forum - trying to use your help when it's really needed.
So, here we go ...
(we use Oracle 8.1.7 on Unix box and SQL * Plus 8.1.6)
While back I wrote "core" PL/SQL package that resides in let's say DB1 database. It has RECORD_EXISTS_FNC function designed to dynamically check If the record exists in certain table/view. Assumptions are that you pass in :
Table/View name, Column name, and unique numeric value (because by DBA rules all of our Tables have SEQUENCE as a Primary Key. And I plan soon to put in overloaded function to accept unique character value)
Also every Table has SYS_TIME_STAMP and SYS_UPDATE_SEQuence columns that populated by Trigger before Insert/Update representing Last Update time_stamp
and how many times record was updated within same second.
(in case more than one User updates same record in same time - that was written before Oracle had more granular date/time). So function has SYS_TIME_STAMP and SYS_UPDATE_SEQUENCE parameters (optional) accordingly.
And It looks something like :
FUNCTION RECORD_EXISTS_FNC
(iBV_NAME IN USER_VIEWS.VIEW_NAME%TYPE,
iPK_FIELD IN USER_TAB_COLUMNS.COLUMN_NAME%TYPE,
iPK_VALUE IN NUMBER,
iSYS_TIME_STAMP IN DATE DEFAULT NULL,
iSYS_UPDATE_SEQ IN NUMBER DEFAULT NULL) RETURN BOOLEAN IS
TYPE REF_CUR IS REF CURSOR;
CR REF_CUR;
i PLS_INTEGER DEFAULT 0;
vRESULT BOOLEAN DEFAULT FALSE;
vQUERY USER_SOURCE.TEXT%TYPE;
BEGIN
vQUERY := 'SELECT 1 FROM ' || iBV_NAME || ' WHERE ' || iPK_FIELD || ' = ' || iPK_VALUE;
IF iSYS_TIME_STAMP IS NOT NULL AND iSYS_UPDATE_SEQ IS NOT NULL THEN
vQUERY := vQUERY || ' AND SYS_TIME_STAMP = TO_DATE (''' || iSYS_TIME_STAMP || ''')
AND SYS_UPDATE_SEQ = ' || iSYS_UPDATE_SEQ;
END IF;
IF iBV_NAME IS NOT NULL AND
iPK_FIELD IS NOT NULL AND
iPK_VALUE IS NOT NULL THEN
OPEN CR FOR vQUERY;
FETCH CR INTO i;
vRESULT := CR%FOUND;
CLOSE CR;
END IF;
RETURN vRESULT;
EXCEPTION
WHEN OTHERS THEN
IF CR%ISOPEN THEN
CLOSE CR;
END IF;
INSERT_ERROR_LOG_PRC ('CORE_PKG', 'ORACLE', SQLCODE, SQLERRM, 'RECORD_EXISTS_FNC');
RETURN vRESULT;
END RECORD_EXISTS_FNC;
So the problem is when I call this function from let's say
database DB2 (via db remote link and synonym) and I know exactly that record does exists (because I am selecting those SYS fields before pass them in) - I get the correct result TRUE. The other programmer (Patrick) calls this function within same DB2 database, within same UserID/password (obviously different session), running exactly the same testing code and gets result FALSE (record doesn't exist, but it does !) He tried to Logoff/Login again several times within several days and try to run it and still was getting FALSE !
I tried to Logoff/Login again and I was getting mostly TRUE and sometimes FALSE too !!!
I thought may be It has something to do with REF CURSOR that I use to build SQL on the fly, so I changed to NDS
using EXECUTE IMMEDIATE statement - nothing changed.
vQUERY := 'SELECT COUNT (1) FROM ' || iBV_NAME || ' WHERE ' || iPK_FIELD || ' = ' || iPK_VALUE;
IF iSYS_TIME_STAMP IS NOT NULL AND iSYS_UPDATE_SEQ IS NOT NULL THEN
vQUERY := vQUERY || ' AND SYS_TIME_STAMP = TO_DATE (''' || iSYS_TIME_STAMP || ''') AND SYS_UPDATE_SEQ = ' || iSYS_UPDATE_SEQ;
END IF;
EXECUTE IMMEDIATE vQUERY INTO i;
vRESULT := NOT (i = 0);
RETURN vRESULT;
Interesting note : when Patrick doesn't pass SYS parameters (Time_stamp, Update_sequence), or passes NULLs - function always finds the record ! (Statement 2 below)
May be it has to do with the way TO_DATE () function gets parsed in that dynamic SQL - I don't know ...
Here's the test code :
SET SERVEROUTPUT ON;
DECLARE
SYS_TIME DATE;
SYS_SEQ NUMBER;
bEXISTS BOOLEAN DEFAULT FALSE;
BEGIN
SELECT SYS_TIME_STAMP, SYS_UPDATE_SEQ INTO SYS_TIME, SYS_SEQ FROM LOCATION_BV WHERE PK = 1;
bEXISTS := CORE_PKG.RECORD_EXISTS_FNC ('LOCATION_BV','PK',1, SYS_TIME, SYS_SEQ); -- STATEMENT 1
--bEXISTS := CORE_PKG.RECORD_EXISTS_FNC ('LOCATION_BV','PK',1, NULL, NULL); -- STATEMENT 2
IF bEXISTS THEN
DBMS_OUTPUT.PUT_LINE ('TRUE');
ELSE
DBMS_OUTPUT.PUT_LINE ('FALSE');
END IF;
END;
I asked our DBA, he has no clue about this strange inconsistent results.
I debugged line by line, extracted that generated SQL and ran it in same account - works fine !
Does anyone knows or have clues or can help what's going on ???
I don't know If this is bug in my code or strange memory behavior ?
(Please let me know If anything unclear)
Thanx a lot for your help and time !
Steve K.

see your other thread
Bug in my code or strange memory behavior ?

Strange icon during shutdown...

Does anyone else have a strange icon flash on the display for a fraction of a second during shutdown? I running 10.5.1 on my 15" MBP 2.16 Core Duo and have noticed a real weird icon that only shows up occasionally during shutdown. It usually blinks on and off too fast to really see what it is, but I think it is sort of like the symbol on the command key and has a red X across it. I don't have any issues with the MBP with the exception of some files that Disk Utility is having trouble with when I repair permissions which seems to take a long time. It gets to a point where it says time remaining is less than a minute, but keeps going and going for another 3-5 minutes after displaying this:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Permissions repair complete
Anyone seen this before or have any thoughts?

Thanks for the tip.
I did as you suggested and the permissions issue is fully resolved. Never had an issue using the Software Update pane, but I'll file the in my overloaded brain for another time.
I haven't seen the strange icon during shutdown again, but I did identify it as the icon for a piece of software called KeyCue. It shows keyboard shortcuts for the active application by holding down the Command key for about 2 seconds.
Thanks again!

Strange icon appeared on iPhone4 bar

strange icon appeared on muy Iphone 4 bar, near the battery icon. it looks like a old telephone hand with buttons underneath. i wonder what it means and how it came there.
My iphone is not functioning properly and i cannot download the software update, wonder if it is related.
thanks,

You're welcome.
For the deaf or hard of hearing.
http://www.captions.com/tty.html

Strange Permissions Behavior with Public/Private Drop Box

Strange Permissions Behavior with Non-Course Drop Box
In an effort to promote iTunes U on campus this semester (and to get people working with audio and video more) we're having a contest in which people can submit personal or group audio/video projects.
This being an iTunes promo, we intend for students to submit their contributions via a drop box.
To that end, I began experimenting with drop boxes in iTunes U, which I haven't done much of previously. I've created a course called "iTunes U Drop Box Test" under "Campus Events". Within that, I have two tabs: "Featured Submissions" and "Dropbox". My goal with this drop box was to allow faculty, students and college folks the ability to use the drop box ("college" being a role I've defined for those who don't fit into the faculty/student roles).
When I first started experimenting, access to the "iTunes U Drop Box Test" course looked like this:
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
Download: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: All@urn:mace:itunesu.com:sites:lafayette.edu
--- Credentials ----
Download: College@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu:classes:${IDENTIFIER}
Download: Student@urn:mace:lafayette.edu
Download: Student@urn:mace:lafayette.edu:classes:${IDENTIFIER}
For the "Featured" Submissions tab, I gave the non-system credentials the "download" right, and for the "Dropbox" tab I gave the non-system credentials the "dropbox" right.
My understanding of this setup is that everyone should have had the ability to view the course and the contents of the "Featured Submissions" tab and that those in the College/Instructor/Student roles would be able to upload files via the "Dropbox" tab ... but not see the contents of said tab after the files were uploaded (aside from any files they uploaded themselves).
This is not the behavior we saw however. While the College/Instructor/Student roles could upload files to the dropbox, everyone (including the unauthenticated public) was able to see all of the contents of the dropbox.
The only way I could get this to work as advertised was to change all of the system credentials save the "Administrator" to "No Access":
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: All@urn:mace:itunesu.com:sites:lafayette.edu
Once I did this, everything worked as advertised: College/Instructor/Student roles could upload tracks, and the "Dropbox" tab would only display tracks they uploaded.
So my question is ... is this the correct behavior for the drop box? It looks like when the system credentials are in play, they're simply overriding whatever the normal "view" rule is for the drop box, which doesn't seem right.

Your current configuration where things work as you wanted does seem correct to me. You are not using any System Credentials to accomplish the functionality and that's fine.
Here's some more info to clarify how / why this is working for you and why you had to set "No Access" for the System Credentials:
The System Credential "Authenticated@..." is going to get assigned to any user that goes through your transfer script. Even if you transfer script assigns no credentials to a user, upon entering iTunes U they will have at least 1 - the "Authenticated@..." credential. Therefore, unless you block access using "No Access", any user that passes through your transfer script is going to be able to access the area in question.
When you change values for "Unauthenticated@..." or "All@..." you are defining what someone that DOES NOT pass through your transfer script can do. You want both of those to be "No Access" at the top level of your site if you do not want unauthenticated visitors.
The distinction between "Unauthenticated" and "All" is that "All" applies to all users whether they pass through the transfer script or not.
Here's another way to remember things:
User passes through your transfer script, iTunes U automatically assigns:
Authenticated@....
All@....
User does not pass through your transfer script and instead access your iTunes U site through derivable URL*, they get assigned:
Unauthenticated@....
All@....
*The derivable URL for a site is: http://deimos.apple.com/WebObjects/Core.woa/Browse/site-domain-name
Mac OS X (10.4.6)

Strange icon in system prefernces

It's weird, but within system preferences, i have a strange icon which seems to be corrupt. the icon is the startup disc icon. it seems to have enlarged and the words "start up disc" have disappeared, because the icon has enlarged. I wondered if there is a way to reinstall the system prefs application or if there is a folder where i can replace the icon. I wanted to attach a pic to this topic but can't. but if anyone wants to help i can email the pic which a have screen captured.
Please help. It doesn't seem to effect my OS but it is a glitch and would love to sort it.
Regards, Leigh

Hi Leigh!
Get Pacifist...
http://www.charlessoft.com/
then extract what you need from your Install Disk.
But 1st do these...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then boot from the HD, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.

Strange icon for Dock into Preferences

Hi,
I just have noticed that I have a very strange icon into the System Preferences for the Dock preferences.
Is there a way to restore the correct one ?
Thx,
Fabrice
PS: is there a way to include a screen shot inn this forum?
MacBook Pro 2.0 / 1Gb / 120 Gb Mac OS X (10.4.5)

Yep, issue solved!
Thank you very much Jim.
This morning the issue appeared one more time.
There seems to have some "corruption" on the file com.apple.preferencepanes.cache
Any other having this strange issue ??
MacBook Pro 2.0 / 1Gb / 120 Gb Mac OS X (10.4.5)

Strange XSLT Behavior: xsl:template match

Hello I found the following strange XSLT behavior when using xsl:template. I only want to read the content of the element /Source/Surname/Details. Therefore I match this path using xsl:template match.
What is strange that in the target message also the value of the Element LastName is written at the end. Please see example below. This is just a short example to point out the problem. I have a bigger message structure where I have to match a similar path. How can I avoid the the value of the FullDetails is just written at the end (not even beeing in an element)? I would have expected that the path is only matched once and the instructions then executed without <LastName> beeing even touched.I used XML Spy for this test.
Here is an example:
Source message:
<?xml version="1.0" encoding="UTF-8"?>
<Source>
     <Surname>
          <Details>MyFirstName</Details>
     </Surname>
     <LastName>
          <FullDetails> MyLastName </FullDetails>
     </LastName>
</Source>
XSLT
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/Source/Surname">
<PORR>
<Name><xsl:value-of select="Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Target Message
<?xml version="1.0" encoding="UTF-8"?>
<PORR xmlns:fo="http://www.w3.org/1999/XSL/Format">
<Name>MyFirstName</Name></PORR>MyLastName
Edited by: Florian Guppenberger on Oct 8, 2009 4:35 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:37 AM

Hi,
I am not sure why your XSLT behaving like that,please try this XSL,what i did chnages is Templete match /*,I given exact path in Value of select,.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/*">
<PORR>
<Name><xsl:value-of select="/Source/Surname/Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Regards,
Raj

Strange typeover behavior in Newsfeeds

I am getting this strange intermittent behavior when create a post in the Newsfeed.
As you begin to type the text compress and it almost looks like the letters are typing over themselves
The resulting text can be posted and looks fine when posted, it some times does throw an error but the error and type over don't seem connected
It happens on all browser types and even phones and tablets

Hi,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Strange icon in Hierarchy palette

Hi all
I got a form to make some changes in and I came across that strange icon (image atteched) I wondered what it means.
It's the form named 'matirial_data' - looks like a regular form with lines in it.
It doesn't seem to behave differently so it doesn't realy bother me, I'm just curious,
Thanks
shai.

found the answer:
This icon shows that the form's content is flowed and it shows the flow direction (western text/top to bottom).
In example:
the form 'Signature' content is 'positione',
the form 'commentsForm' is 'flowed' - 'western text'
the form 'dataform is 'flowed' - 'top to bottom'
Thanks to all
Shai.

Strange icon appears in the menu bar randomly

I'm using a late '13 macbook pro retina and recently I've noticed that a strange icon will popup in the menu bar somewhat randomly, though it seems to appear most when I access certain websites (ebay is the one I've noticed it happen the most).
The icon is between the power level and the date and time and appears in the spot where the keyboard language icon usually is. When I try to click the icon nothing happens and it just opens the language drop down menu. It disapears after a few seconds but when it appears a strange black flicker will appear at the top of my screen just below the menu bar.
Thanks

In ->System Preferences->Keyboard, Uncheck:
And...

Powerbook won't get past strange icon upon start-up

Hi,
I have a Powerbook G4 that will not go past this strange icon when I try to start it up. I get the traditional Mac start-up sound, then it takes a long time to do anything, then I get a small icon that is in the shape of a folder. It has the Mac face (it is still "happy") and it will pop a question mark up over the folder.
Last night, it was making a strange noise, so I ran the Disk Utility and it said the hard drive appeared to be OK. This morning, it will not go past the icon. Is it saveable? It is pretty old (6 years).

Your hard drive is dieing or possibly dead! Unplug all peripherals, let the machine cool down and persist in starting up. It 'may' boot so you can back up your data. Try booting from the OS disc and run the Utilities to see if it can repair the issue. There are a few third party apps that may help in recovering data from the disc, but there are no guarantees they will work and, of course, they are not free. Sorry, no joy or easy fix for this one.

Strange icon behavior

Similar Messages

Maybe you are looking for