Strange iMessage Behavior on WIFI only

Hello Everyone.
So I have noticed this issue for a while and I can't seem to resolve it. I'll start off with a few things.
I have restored the phone completely
Signed out of iMessage and back in
Reset my Network Settings
Nothing seems to resolve the issue. My issue seems to occur ONLY on wifi. My phone will be locked and I'll get an iMessage. It'll show up on my iPad but not on my iPhone. Without opening it on the iPad, I'll unlock my iPhone. As soon as I unlock, the red badge on the Messages App will show the number of messages I have. I will then open the Messages App on my phone and none of the new messages will appear. The only way to make them appear is to close messages, double click the home button and then close out the Messages App and open it back up to see the message. This also happens on my iPad occasionally.
I NEVER have this issue when I'm not connected to wifi. I can't tell if its because of my home network but I'm using a Time Capsule with WPA2 as my security settings.
Anyone have this issue or know how to resolve?

Hello there, Andres_F.
The following Knowledge Base article is great for troubleshooting the issue you're describing:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the first steps dont help you get taken care of, the section that follows under "If you still can't send or receive iMessages":
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Note: To receive iMessages sent to your phone number on your iPad, iPod touch, or Mac, you must meet the following requirements:
iPad or iPod touch using iOS 6 or a Mac using OS X 10.8.2.
Verify that you are signed in to your Apple ID account on Settings > Messages > Send & Receive.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

IMessage and IPad wifi only

Hello. How I can send IMessage to IPhone with my IPad wifi only?
Thanks

From the Messages app.
http://support.apple.com/kb/HT3529

Strange TREX behavior: Document search only shows 15 results

Hi.
I've one TREX implementation. It's connected to a SAP eLearning repository in a Portal and no matter what search criteria I use, it always returns me a list of 15 found resutls!
It's always the same number, for different searchs, and of course I've checked that there are more than 15 right resutls, so it looks to me like a parameter restriction or something like this, but I still havent found it.
Do any of you know what could be causing this??
Any help would be really really appreciated.
Thanks in advance and regards!!!

Hi Armando,
the reason that the portal shows every time only 15 results can depend on the used KM Layout Set.
Within the KM layout Set which is assigned to the search result iView you can specify the number of rows and whether a page link sould appear or not.
Normally the default Layout Set should work properly.
But you can as well use the search command in the standalone tool TREX-Admin. Here you can see the number of results as well.
Best regards
Frank

Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

1. Did you use Bootcamp Assistant?
2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
4. What year is the Retina MBP?

Does iMessage works on an iPad WiFi only(no 3G)?

I´m trying to activate iMessage on an iPad Wifi only(no 3G), but it fails saying there´s a problem with my network connection, the same network i use my iPhone 4 where iMessage seems to be activated.

I´ll have to find out what´s wrong, because Safari does work. I must say its a Ad Hoc connection with my PC at work, where the network uses proxy. But navigation on Safari works fine on the iPad. I´m going into Setting - Messages - and there it asks me to put password and start the session. After sometime it says the session couldn´t be started.

FaceTime and iMessage are not working in iPad mini 2 wifi only model.

Hi ,
I am using iPad mini with retina display wifi only model. In my iPad everything is ok but FaceTime and iMessage are not working. In settings Removed my id and re-logined multiple times, but still they are not working. Please help me.

Hi there Suryateja24,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
-Griff W.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

Howdy eewebe13,
So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
Please step through this article for that scenario.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Thank you for visiting Apple Support Communities.
Nubz

I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to the old phone?

I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to my old phone?
Just turning off Cloud will not prevent him from turning it back on.
Rignt now, if he uses the App store, iTunes thinks it's talking to me.

First, turn off iMessage, FaceTime & delete the iCloud account, while your sim is still in the phone. Then: Settings>General>Reset>Erase All Content & Settings. Give it to your grandson & he gat then set it up as he wants.
Important your turn iMessage & FaceTime off to disassociate the phone from your Apple ID. Apple "claims" to have fixed this with iOS 6.0, but until I can absolutely confirm such, I still recommend you turn all of that stuff off first.

Why is my internet speed slower on my 4g iPod touch compared to my 1g iPad (Wifi only), though we use the same router?

i bought my 4g iPod touch just 3 months ago fromt the US. Internet speed was just fine and working consistently while i was using a d-link router.
my Wi-Fi network is password protected and since has not affected the speeds on my pc or my iPad (wifi only). However, just 4 weeks ago, i bought a new router, an Aztec one. That has not improved or worsened the speeds on my pc or iPad, but worsens only my iPod touch, even though it says its connected and has a full signal strength.
Here are the symptoms:-
1. iMessage is now really slow as after i click send, the loading bar at the top lags.
2. i can't go on to google or any site or app that involves internet connection e.g. Facebook, Twitter
3. I can't purchase or get apps from the App store as the searching takes way too long.
4. Now as i pull down the notifications bar, it shows temperature but no stock; i can't even access the Stocks app
5. I can see the temperature for the day on the notifications, but i cant see the details for the rest of the week like i was able to
6. I now cant read any updated emails on Mail as it takes way too long
I live in a country called Brunei, and speeds are the worst there, yet they shouldn't be this slow especialy when my friends and other devices are working.
So, what's wrong? Is it my new router?

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Strange Permissions Behavior with Public/Private Drop Box

Strange Permissions Behavior with Non-Course Drop Box
In an effort to promote iTunes U on campus this semester (and to get people working with audio and video more) we're having a contest in which people can submit personal or group audio/video projects.
This being an iTunes promo, we intend for students to submit their contributions via a drop box.
To that end, I began experimenting with drop boxes in iTunes U, which I haven't done much of previously. I've created a course called "iTunes U Drop Box Test" under "Campus Events". Within that, I have two tabs: "Featured Submissions" and "Dropbox". My goal with this drop box was to allow faculty, students and college folks the ability to use the drop box ("college" being a role I've defined for those who don't fit into the faculty/student roles).
When I first started experimenting, access to the "iTunes U Drop Box Test" course looked like this:
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
Download: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: All@urn:mace:itunesu.com:sites:lafayette.edu
--- Credentials ----
Download: College@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu:classes:${IDENTIFIER}
Download: Student@urn:mace:lafayette.edu
Download: Student@urn:mace:lafayette.edu:classes:${IDENTIFIER}
For the "Featured" Submissions tab, I gave the non-system credentials the "download" right, and for the "Dropbox" tab I gave the non-system credentials the "dropbox" right.
My understanding of this setup is that everyone should have had the ability to view the course and the contents of the "Featured Submissions" tab and that those in the College/Instructor/Student roles would be able to upload files via the "Dropbox" tab ... but not see the contents of said tab after the files were uploaded (aside from any files they uploaded themselves).
This is not the behavior we saw however. While the College/Instructor/Student roles could upload files to the dropbox, everyone (including the unauthenticated public) was able to see all of the contents of the dropbox.
The only way I could get this to work as advertised was to change all of the system credentials save the "Administrator" to "No Access":
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: All@urn:mace:itunesu.com:sites:lafayette.edu
Once I did this, everything worked as advertised: College/Instructor/Student roles could upload tracks, and the "Dropbox" tab would only display tracks they uploaded.
So my question is ... is this the correct behavior for the drop box? It looks like when the system credentials are in play, they're simply overriding whatever the normal "view" rule is for the drop box, which doesn't seem right.

Your current configuration where things work as you wanted does seem correct to me. You are not using any System Credentials to accomplish the functionality and that's fine.
Here's some more info to clarify how / why this is working for you and why you had to set "No Access" for the System Credentials:
The System Credential "Authenticated@..." is going to get assigned to any user that goes through your transfer script. Even if you transfer script assigns no credentials to a user, upon entering iTunes U they will have at least 1 - the "Authenticated@..." credential. Therefore, unless you block access using "No Access", any user that passes through your transfer script is going to be able to access the area in question.
When you change values for "Unauthenticated@..." or "All@..." you are defining what someone that DOES NOT pass through your transfer script can do. You want both of those to be "No Access" at the top level of your site if you do not want unauthenticated visitors.
The distinction between "Unauthenticated" and "All" is that "All" applies to all users whether they pass through the transfer script or not.
Here's another way to remember things:
User passes through your transfer script, iTunes U automatically assigns:
Authenticated@....
All@....
User does not pass through your transfer script and instead access your iTunes U site through derivable URL*, they get assigned:
Unauthenticated@....
All@....
*The derivable URL for a site is: http://deimos.apple.com/WebObjects/Core.woa/Browse/site-domain-name
Mac OS X (10.4.6)

Strange XSLT Behavior: xsl:template match

Hello I found the following strange XSLT behavior when using xsl:template. I only want to read the content of the element /Source/Surname/Details. Therefore I match this path using xsl:template match.
What is strange that in the target message also the value of the Element LastName is written at the end. Please see example below. This is just a short example to point out the problem. I have a bigger message structure where I have to match a similar path. How can I avoid the the value of the FullDetails is just written at the end (not even beeing in an element)? I would have expected that the path is only matched once and the instructions then executed without <LastName> beeing even touched.I used XML Spy for this test.
Here is an example:
Source message:
<?xml version="1.0" encoding="UTF-8"?>
<Source>
     <Surname>
          <Details>MyFirstName</Details>
     </Surname>
     <LastName>
          <FullDetails> MyLastName </FullDetails>
     </LastName>
</Source>
XSLT
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/Source/Surname">
<PORR>
<Name><xsl:value-of select="Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Target Message
<?xml version="1.0" encoding="UTF-8"?>
<PORR xmlns:fo="http://www.w3.org/1999/XSL/Format">
<Name>MyFirstName</Name></PORR>MyLastName
Edited by: Florian Guppenberger on Oct 8, 2009 4:35 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:37 AM

Hi,
I am not sure why your XSLT behaving like that,please try this XSL,what i did chnages is Templete match /*,I given exact path in Value of select,.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/*">
<PORR>
<Name><xsl:value-of select="/Source/Surname/Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Regards,
Raj

Does texting on imessage through free wifi charge you if you don't have a text messaging or data plan?

Ok so I just got a new iphone 4s that's factory unlocked & I was wondering if you texted someone through imessage on wifi, will that charge you any money?
If the person doesn't have imessage? And if they do? Because I don't have a text messaging or data plan.

michelletu1031 wrote:
But what if I don't use the data plan for imessage and use wifi instead?
If you are using wifi, you are not using a data plan. You will not be charged.
And you cannot send SMS over wifi. You can only send iMessages (to people with Macs/iDevices and iMessage enabled).
I was wondering if you texted someone through imessage on wifi, will that charge you any money?
Messages is the app.
iMessage is type of message that goes over wifi or cell data.
Open the Messages app and add a phone number or appleID, the line to enter you message will display Text Message (and a green Send button) or iMessage (and a blue Send button).
If it's a text message (green) it will be sent as SMS and you will be charged, even if you are on wifi.
If it's an iMessage (blue) and you are on wifi, it will be sent over wifi (no charge).
If it's an iMessage (blue) and you are NOT on wifi, it will be sent over cell data or sent as an SMS.

My WiFi only new iPad running iOS 6 shows my wife's phone number

My WiFi only new iPad running iOS 6 shows my wife's phone number in settings for face time & iMessage. My apple account has only my number. How can I make FaceTime & iMessage use my phone no?

it is a retina display and it just says iPad on my Box and i paid NewTaiwan$19500 at my apple retail outlet... went to settings...then general... no Siri on it!!!!

When traveling abroad, how to use wifi only?

My daughter is going to a tech school in Denmark and wants to use her phone for local wifi access (web browsing and iMessage, etc). This morning we were able to exchange text messages when she was not connected to wifi. It appears she would have been using cellular without a global plan. Even with a global plan text/sms messages would cost $0.50 each
I'd like a checklist of what to turn off so her phone will work on wifi only.

We have it working now and it appears that turning off SMS and MMS is what we had missed before.
Additionally, it seems that she can only iMessage with someone who has started the iMessage conversation from here in the U.S. Otherwise, her iMessages are not delivered.
Didn't get to try the Airplane Mode suggestion but it sounds pretty likely to work,,,
Thanks for the suggestions!

I have an Ipad mini 16mb WiFi only...For some reason it has quit recieving txt msgs. My I phone will..The pad wont..Ive checked all settings and no luck..Anyone help?

I pad mini 16 mb WiFi only...
For some reason the Ipad quit recieving txt msges...I have changed nothing...My I phone is recieving the txt...I have a connection between my home network and the ipad...All settings in the MESSAGES>SETTINGS are correct....Any Help?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Strange iMessage Behavior on WIFI only

Similar Messages

Maybe you are looking for