Strange integrated Realtek 650 studdering problem, any help mucho appreciated?
Well, here goes, my problem is when ever I am extracting a large .rar file and listining to music in winamp at the same time, my music starts to studder, pop, crackle and everything else in the background also slows greatly. It also effects games too. Whenever there would be music with a game installer, it would studder too the progress bar. I am running a 64 bit OS but I've also had this problem with the 32 bit OS. I tried drivers from MSI's site, Nvidia's, and Realteks. Untill recently I discovered a fix, sort of.
I went into the device manager and disabled the ac97 audio driver and then reenabled it and everything worked perfect. For the first time I felt like I was running a dual core machine. The studdering and slowdown was completly gone. I could actually extract 3 rar's at once with no problem. After leaving my pc on all night or after a restart though it would revert back to the problem again and I would have to disable/renable it over and everthing was fine again.
I wish I had a more perment fix for this problem though. I hope I don't have to get my Mobo replaced because of this minor audio glitch.
Also another problem I have is when I play need for speed most wanted, I am getting a weird studdering especially during a corner. Even in low res and low specs, strange? I wonder if that has to do with my 3800X2 processor. I should'nt get any slow down considering this was a gamecube game that came out last year. Hell I can run Fear and Battlefield 2 max settings with AAX2 in 1280x1024 with no slowdown but not NFSMW. Plus I'm running a 7900GTXXX.
Test Drive Unlimited is coming out soon, I hope I don't run into any problems with it too. Well that's about it.
Thanks for the Help!!
SPECS:
MSI K8N Neo-4F PCB1.0
AMD64X2 3800
1 Gig Dual channel Corsair
80 Gig. 7200 Maxtor
XFX 7900GT 520 OC Stock/Overclocked too 560/850
500Wtt PSU
Music is played from a file (read) on your single HD .
Doing other jobs that at the same time reads/writes to other sector(s) cause the players read buffer to
go empty as the HD is busy writing/reading on another part of it.
In other words , for this case normal behaviour .
Similar Messages
-
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
I've deselected the disc, reselected it & re-entered the password 3 times now with no luck.
Any help greatly appreciated!It sounds like you have much more issues than simply the TC..
I can suggest or have suggested the workaround to the TC problem.
Did you try it??
What happened if you did?
Did you simply try the standard old reboot the TC.. ie yank out the power cord. count to 10.. plug in the power cord.
That magically fixes lots of network issues.
Mavericks has some major issues.. do you upgrade install.
Let me strongly recommend a clean install.. if you haven't done it. Your issues with safari look like a corrupted install to me.. but I am not an eggs spurt in OS issues.. by any long stretch of the imagination.. post the issue over in the Mavericks area.
But as an old computer support man.. (old should be emphasised) upgrade installation are anethma.. I have never seen them work 100% and that includes with Mac. Of course you cannot expect windows to work.. but things go wrong in every OS.. no matter how wonderful.
Make sure you have a good TM backup .. clean install and migrate your documents back.. maybe reinstall software from scratch. Not easy but the only way. -
every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated
I had this issue. I went to c:\program files (x86)\Mozilla Firefox\
I renamed my plugins folder to plugins.old.
It recreated the Plugins folder and all was good again. I have since reinstalled the plugins I've been prompted to install. -
Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.
-
Need help setting up airport express as bridge (Any help is appreciated)
Hello so before my wifi was switched I was able to use my 802.11g airport express as a wifi card for the xbox 360. I then decided to upgrade my main base station from an 802.11g base station to and airport extreme 802.11n. My problem is that my airport express cant extend the airport extreme network to my xbox anymore because they are different 802.11 versions. So can anyone help me configure this so I can get this back? Any help is appreciated.
My Current Setup:
Internet => Airport Extreme 802.11n => Wireless => Airport Express 802.11g (to extend network for xbox)=> Ethernet => Xbox 360
Thanks!As I said, WDS is a nightmare for most users. Apple hides the settings from users to discourage use of WDS.
I do not recommend that you do this, but have a feeling that you will do this anyway.
I will not be able to help you sort out WDS problems.
On AirPort Utility 5.6, click Manual Setup
Click the Wireless tab below the icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box and the WDS settings will appear
Apple's instructions for WDS are here:
http://support.apple.com/kb/HT4262
Hope this helps. Good luck. -
Mac doesn't recognize external HD anymore. Any help is appreciated.
Hi Everyone. Suddenly, my MAC mini doesn't recognize my external hard drive any more. It was fine for years and today it's not "there".
I tried connecting with different fire wire cables and still, same problem.
I also tried connecting the external HD to my iMac and still, doesn't recognize it.
I tried restarting many times, still, same problem.
I tried disconnecting all cables and power cords, reconnecting them and powering on, and that didn't resolve it.
I have been searching the web all morning for ideas and can't seem to find a solution.
The external HD is a Maxtor III 300 GB. Older one but was big enough for my needs.
I was reading that sometimes doing a software update might cause an issue with external HDs. I just don't know how to resolve that if it is.
This hard drive is formatted for the Mac.
According to Maxtor I do not need to update my drivers. I was thinking that maybe one got lost.
Any help is appreciated. Thanks in advance!
ChristineIf only the mini couldn't read it, that would lead down one path. However, if both the mini and the iMac can't read it, that sort of points to an issue with the drive. Do you hear the drive power up? If you have an external power supply have you tried that or do you use that with it?
It's possible that the hard drive is in fine condition, and it's the case electronics that are acting up. You should be able to pull the hard drive out of the Maxtor case and put it into another external case, to read the hard drive, assuming the drive itself is OK. -
E6-00 gone brick. Any help is appreciated.
My phone ran out of battery last week. The battery got totally empty, I suppose, while I was making a phone call. I plugged it in immediately just to find the on/off button defunct. Whenever I press the power button, the charging light (the one on the usb out, that lights while being charged) blinks a few times, then goes off. The phone never starts. I think the device has gone brick or it's a firmware-related issue even if recoverable. What could the problem be? Isn't there any solution available except taking it to a service point? Any help is appreciated, thanks in advance.
Did you leave it for charging for about 2 hours and see NO difference ?
Next..Remove the battery for a couple of minutes, Insert and then try switching ON..If no change then Try a Hard Reset...(Press Answer + Reject + Camera keys together..and while kept pressed Start the phone.. Leave the buttons only when you see the Nokia Logo on the screen..)
If nothing works, ONLY Nokia Care may provide the solution.. -
Question
My Rocketfish 2.4ghz wireless mouse scrolls fine on other browsers but I can't on Firefox. Any help is appreciated as I really want to use Firefox but need the scroll function. ThanksHad this problem for quite a while but found a work-a-round. I click anywhere in the text I want to delete and insert any character. I am then able to block and delete any text I want to. It's been working great.
-
Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.
You can try resetting your iPad and iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
I am having trouble downloading a whole playlist to my phone. Parts of the playlist will sync but there are still a lot of songs that won't. I have plenty of space to hold this playlist as far as I can see. Any help is appreciated.
I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/ -
My husband and I both have iphones and both are linked to the app store and i cloud. Now my husband is receiving all of my text messages and has all my contacts. How can we get it to where he does not receive my messages anymore? Any help is appreciated!
Best way is to get your own Apple ID, but until then have him go to Settings > Message > Receive at and remove your phone number.
-
I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.
When updating my iPod Nano, I get the error message: Unknown Error 9006. Any help is appreciated.
See this
http://support.apple.com/kb/TS3694#9006
Maybe you are looking for
-
Fetch excel file from app. server using open dataset...
Hello Experts, Our functional consultant is asking me if it possible to get an excel file from the application server file using OPEN dataset and in background mode? If yes, Please tell me on how to do this. Thank you guys and take care!
-
Using Automator to open a program with a delay after a programmed restart
Hi to all! With my old PowerPc I used to start unattended sessions of my Newsreader (Unison) overnight simply putting Unison in my Login elements window, and programming a restart at a fixed hour. Unfortunately, with my very fast new iMac this doesn'
-
Linking of vendor payments to Purchase order
Hi My requirement is that i want to link payments ( vendor ) to PO i.e how much payment has been made to particular vendor for a particular vendor . I have placed several orders to a single vendor for the supply of different material. In my scenerai
-
A problem about Chinese encoding
When i access portal by SSL,I find one or two problems about encoding. reshow these problems: 1. Locale be set to Chinese(zh_CN) 2. access portal by SSL 3. Administration/create portlet Then the popup window's title will show a bad encoding. otherwis
-
Essbase 9.3.1 Excel Add-in not compatible with Office 2010?
Hi, I have office 2010. I installed Essbase 9.3.1. I realized that Excel Add-in is not compatible with Office 2010? Any work around? I do not want to remove office 2010 and go back to office 2007. thanks. -Sarkar.