Strange Ipod issue

Let me explain my problem:
Video ipod 60gb
-Will not charge with the wall charger.
-Computer says too much power being used by port when plug it into windows or imac and kicks it out. Or does not register at all.
-Charges and plays fine through car attachment and docking through ihome stereo
-Plays fine (but cant add or delete since computer wont recognize)
I dont want to wipe it clean and then not be able to use it ever again
Any ideas????

Try changing the drive letter as explained here.
http://docs.info.apple.com/article.html?artnum=93499
(you might also want to remove that request for broken iPods from your signature before the Mods see it)

Similar Messages

  • Strange audiobooks issue

    I have a strange audiobook issue. For background, I'm running iTunes 7.1.1 on Windows Vista Business, and have a 30GB video iPod.
    Ok. I bought the audiobook of "The Great Gatsby" from iTunes. It is in my iTunes as an audiobook, is checked to sync and everything. Also, when my iPod is plugged in, and you expand the little arrow over in the left hand (so you can see what's actually ON the iPod, as opposed to in iTunes) and click on the Audiobooks under the iPod, it shows up, all three parts of the book.
    However, when I look on my actual iPod, scroll to Audiobooks on the device, it's not there. But it says it's there (over iTunes) when it's plugged in.
    Another audiobook, one that has been on there forever, apparently syncs just fine.
    Anyone experience this?
    (Please, for the love of Christ, don't anyone post on here and tell me that iTunes is not fully compatible with Vista. I know this. You know I know this.)

    Ok, for anyone coming across this in the future.
    I resolved this by changing up the way I was running the MovUser command a little bit.
    Previously, I was using MoveUser with the -u option, it would migrate the mailboxes, as far as I could tell, successfully. Then I would update the mailhost ldap attribute myself.
    I changed to using the -l option with an ldap url and -A to have MoveUser update ldap, and it seems to be working just fine.
    Not sure why first command doesn't work though...

  • 20GB Clickwheel iPod Issues

    So, I've had this lovely thing for a few years now and it has worked quite well. Today in the middle of a workout, it just stops. I tried resetting it, no go. All it does is bring the Apple logo up (like its starting) then it will go to either the iPod with the unhappy face or the folder icon and it says below: "www.apple.com/support/ipod"
    I tried connecting it to its computer, no go. Power source, no go. It continues to stop in its starting up phase.
    Anyone have any ideas?
    Thanks,
    Andrew

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    http://www.rapidrepair.com/shop/g4-ipod-parts.html
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Strange ipod symptoms

    Hi thought i would share my woes maybie someone can advise....
    (i realise this isnt an ipod forum before i get hounded)
    about 4 months ago my 3g ipod packed up..... fair enough i thought id got 2 years continuous use of it. so i put it in the drawer (just in case it might work again as ive heared this happen)....
    ....anyways, ive since replaced it with a new nano so im not too bothered about it.....
    i thought i would try it out to see if theres any life there, lo and behod, when i plugged it in, it played a few tracks.....strange.....
    I did a HD test in diagnostic mode and this reported a failure....i tried to plug it into my pc and my mac and neither would recognise it..... but STILL it played a few tracks that were on the hard disk.....
    The reason it think there a problem with the HD is that it makes a clicking noise for a few minutes when it boots before finding some music.... it makes me think that there may be a damamged boot sector or something (if such a thing where to exist on an ipod)
    im not looking to spend much to get it going again (as i think the battery may be on its way out). anyone got any ideas about what could be wrong with it ?

    It could be just some bad sectors on the HD of your iPod, even badly the iPod OS could be located partially at the bad sectors ...
    If you have time and would like to have a try, read the following - why leave it as a paper-weight
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Strange performance issue with 3510/3511 SAM-FS disk cache

    Hi there!
    I'm running a small SAM-QFS environment and have some strange performance issue on the disk storage part, which somebody here might be able to explain.
    Configuration: one 3510, dual controller, RAID-5 9+1, one hot spare and one disk not configured for whatever reason. The R5 logical drive hosts a 150GB LUN for SAM-QFS metadata (mm in SAM-FS speak) and a 1TB LUN for data (mr in SAM-FS speak). Further, there are two small LUNs (2GB, 100GB) for some other purpose. Those two LUNs have nearly no I/O. All disks are SUN146G. Host connection is 2GBit, multipathing enabled and working.
    Then the disk cache became too small, and the customer added a 3511 expansion unit with SUN300G disks. One logical drive is a RAID-1, 1+1, used for NetBackup catalog. The other is a RAID-5, 8+1, providing two LUNs: 260GB SAM-FS metadata (mm) and 1.999TB SAM-FS data (mr).
    For SAM-FS, the LUNs form two file systems: one "residing" in the 3510, the other "residing" in the 3511 expansion. Cabling is according to the manual and checked several times by several independant people. Operating system is Solaris 10, hardware is a V880.
    The problem we observe: SAM-FS I/O on LUNs on disks inside the 3510 is fine. With iostat, I see 100MB/s read and 50MB/s write at the same time. On the SAM-FS file system which is running on the two LUNs in the 3511, the limit seems to be at 40MB/s read/write. Both SAM-FS file systems are configured the same in regards of block size.
    In case I have activity on both SAM-FS file systems, I see 100MB/s+ on the LUN running inside the controller shelf and another 40MB/s on the disk runnin in the 3511 expansion chassis. So, the controller is easily capable of handling 150MB/s.
    Cache settings in the 3510 controller are default I think (wasn't installed by me), batteries are fine.
    Is this 40MB/s we experience a limitation by the expansion shelf? Don't think so. Anybody has any ideas on this? What parameters to check or to change? Any hint appreciated. I can also provide further details if needed. Thank you.
    wolfgang

    SUN300G disks sound like 300GB FC disks.
    Depending on how many files are in the SAMFS file system, sharing the mm and mr devices on the same RAID array can be a pretty horrible idea. In my opinion and experience, it's almost always better to NEVER put more than one LUN on a RAID array. Period. Putting more than one LUN on an array results in IO contention on that array. And large, unnaturally configured (9+1? Why?) RAID arrays will have problems from the start.
    What are the block sizes used on the RAID arrays? It wouldn't surprise me to see that the RAID array on the expansion tray has a very large block size. Larger block sizes are, in general, not better. Especially for SAMFS metadata - which IIRC is something like 8k or 16k blocks.
    I suspect what is happening is most of the metadata updates are going to the mm device on the new array, contending with the IO operations on the file data.
    How much space is left on each mm device? What does "iostat -sndxz 2" show when you're having the IO problems?

  • I uninstalled itunes to fix some ipod issues, and now I tried to reinstall it but it says that it's already installed.

    I uninstalled itunes to fix some ipod issues, and now I tried to reinstall it but it says that it's already installed. When I went to find the "icon" I can"t find it. When i looked in the download files I saw the downloads, but not the actual itunes "app". Please help thanks!

    How did you uninstall it and what were your IPOD issues - that may help clarify the problem.

  • Strange import issue .. no longer works in 2.6 or Beta 3

    Strange import issue.
    I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
    So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
    I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
    I am stumped any ideas?

    Thank you for everyone's assistance
    I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

  • Strange Catalog Issue or bug. Help, photos disappeared help?

    My images disappeared in the catalog. They are not missing, they are just not visable. I think there is a bug in the Fliter section.
    Let me explain. I have one Main folder with 5 Sub folders. All those folders contain random amounts of images. (i.e. the path would be...  Photo/2010/BeachShoot, or Photo/2008/PartyPics... etc).
    I imported 5 years of images, hence 5 Sub Folders. I was randomly flagging images to be rejected with the 'x' key. Basically routine maintenance... flag so many, then call up only the rejected photos in the grid view, select all, then delete. Remove the Flag Filter... repeat process over and over...   Basic, simple work...
    Now... doing the exact some thing.. I removed all Flag filters and my images are no longer appearing in the catalog. I tested, by turning on flags, off flags.. etc. The images did not accidentally get deleted. I checked my hard drive location. Images are there. I rebooted the machine, I opened up another catalog, to trick it back... did not work. I tried to re-import the images.. but it says they are already in the catalog.
    Strange part: On the Left Sidebar window, under Catalog "All Photographs" it shows the correct number of photos in the catalog. However... the strange part... Under "Folders" in the Left Sidebar beneath Catalogs my Main Folder shows "Zero" number of images. But, if I click on a sub root folder where the images reside, they number changes from Zero to the correct number of images and my images reappear on the screen as normal..
    The work around... click on every subfolder...
    The solution... Unsure? Help!
    john
    Strange Catalog Issue or bug. Help, photos disappeared help?
    System: Mac OS X 10.7.2
    Lightroom 3.6

    We all get there sometimes Glad it was so easy!
    Beat

  • Strange Printing Issue With New HP & Pages

    Hello!
    I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
    You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
    After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
    This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
    Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
    Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
    Any advise, wise words would be greatly apprechiated!
    Thanks!

    Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
    We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
    Very Strange!

  • [solved] Strange Audio Issue

    I am experiencing a strange audio issue with my Intel-HDA ICH7:
    # lspci -v
    00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    Subsystem: Hewlett-Packard Company Unknown device 30a5
    Flags: bus master, fast devsel, latency 0, IRQ 22
    Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access>
    when I installed Arch linux the first time a mounth ago on this computer, I had a sound problem that was solved in a very strange way.
    Everything worked fine until a week or so (I believe from Alsa 1.0.12). Now sometimes sound works and sometimes it doesn't. For example sometime I boot the computer and have no sound, then I reboot it without doing anything, and then sound works.
    I have tried messing with the modprobe.conf:
    # /etc/modprobe.conf (for v2.6 kernels)
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.11 ---
    #alias snd-card-0 snd-hda-intel
    #alias sound-slot-0 snd-hda-intel
    # --- END: Generated by ALSACONF, do not edit. ---
    #options snd-hda-intel model=F1734
    options snd-hda-intel model=z71v
    options snd-hda-intel position_fix=1
    but it was useless. If I put back the modules in rc.conf everything is worse: sound doesn't work at all.
    A diff between lsmod in a "working boot" and a "without sound boot" showed that the same modules where in kernel memory.
    A diff between dmesg showed this difference:
    < hda_intel: azx_get_response timeout, switching to single_cmd mode...
    was present in the not working boot. This line is absent in a working boot dmesg.
    The only way to make the sound card working everytime is to remove the snd* modules load from the boot sequence and load the modules "by hand" after the login.
    Any ideas?
    PS : If something is unclear due to my poor English please tell my and I'll try to explain it better.

    phrakture wrote:snd-hda-intel is screwed up - on my thinkpad I had to go into the bios and enable the modem for sound to work.  Oddly enough, the modem was off by default.
    Also, mine has no PCM listed, I need to use "front" as my PCM level... not to mention the UI is way off with 'tpb' (if you have a thinkpad)
    Yes it's not an Arch Linux related problem: I had problems with Debian (Etch and Sid based distros like ubuntu) too (but there I had no modprobe issue on the init sequence. Maybe is a problem of shared IRQs, but I have to study the existing documentation as I am a newbie). The difference is that Arch is simple enought for me to try something like modprobing "by hand" in the init sequence. PCM seems to work, however the volume is very low and I have found no way to make the mic work. Under Mepis I was able to make it work only if I plugged it in windows xp and then reboot into Linux. But I can't try it with Arch as I have erased the windows partition...
    I will try the new kernel, study the documentation and then report. Hoping this will be usefull to others too.

  • Very strange backlight issue

    I have a 600mhz (16 VRAM) iBook that I'm trying to fix for a friend. It has a strange backlight issue. Everytime the ibook is started, it chimes, and shows the screen (bright and perfect), but as soon as 9.2 starts to load, the backlight goes out. It is not intermittent, it happens at the exact same time every time I start it up (right when the progress bar starts to move). I reset the PRAM, which caused the computer to now look for a startup device, so all the extra time it takes search, the backlight is fine. Here's what I've tried.
    In firewire mode, the backlight never comes on
    With a hardware test disc, the backlight never comes on
    Reset the PRAM (several times)
    Reset the PMU (several times)
    Any ideas out there?

    As an update, I tried a Mac OS 10.4 startup disc which seemed to work, and the backlight came on with no problems. The machine did freeze on the welcome screen right after I selected english as the language of choice. So I tried a 10.3 disc which yeilds a kernal panic of "Unable to find driver for this platform: "PowerBook 4,3". After this, I tried a 9.2.2 disc which boots (takes 20 mins to boot) and when I try to load the installer I receive a "this program can not run on this machine", and it closes. This really seems like a strange problem. Any ideas?

  • Really strange network issue that is specific to OS X 10.6.8

    Really strange network issue that is specific to OS X 10.6.8 on both 2 iMacs and an older intel Mac Pro.
    Any system running 10.6.8 is achieving on average 15 –20 mb a sec transfer rates regardless of drive speeds, cables, network activity etc.. I've spent some time removing any cable , drive speed, router issues to the point where one machine dual boots into both 10.6.8 and 10.6.5
    The 10.6.5 system has network speeds of 60mb – 80mb p/sec transfer rates.
    Our older 10.5.8 PPC mac gets 80mb and my 2011 Macbook Pro 10.7.2 hits 60mb – 80mb consistently as well.
    Any idea what the cause is?
    Cheers

    Since your other Mac running 10.5.8 is not affected, you know that your AirPort router is functioning correctly.
    What changed on your Mac? This seems like a post for either the Mac OS X v10.6 Snow Leopard support area, or the support area for your model of Mac.
    We normally handle questions about the AirPort Express, AirPort Extreme or Time Capsule in this area, but you can certainly wait to see if you receive a response here.

  • HP Dm1-1102sa Strange charging issue

    Hi,
    My laptop (HP dm1-1102sa) has developed a strange charging issue. The laptop will initially charge fine then it will flick between being charging and running on battery constantly. I bought another battery to see if it was that but the problem still occurred. I then took it apart to check for loose connections and voltage. There were no loose connections and the pins on the battery terminals were showing a constant 18.5v. I tried running the laptop with out the battery and the laptop shutdown after a while.
    Anyone have any ideas on what I can do next?
    Thanks in advance.
    Simon

    Hi, thanks for the response, I had a look at this page and followed the suggestions, it all came up fine.
    What I have noticed is the bi-coloured LED that sits next to the power connection on the left side was white which indicates not charging (so it seems) , even when it was at 73% and plugged in it wasn't charging, I removed the battery and gently blew out the plug and socket and re-connected the battery several times to see if it was a contact issue, I also did the same for the power connector.
    The odd thing was it would run perfectly on battery and on mains just not charging.
    I downloaded the latest bios revision (not yet installed), so I left it for a while with the battery and the mains lead disconnected, reconnected everything and noticed the bi-coloured LED was now orange so I left it on the desk for a while not running and when I did start it up some time later it was upto 95% charge and then stopped charging again, and again the LED was back to whte.
    Today after receiving this message I tried the suggestions as per the document (except I pulgged in the mains first which brought up the orange LED), performed the tests, I had already tried the HP assistant battery test in windows which showed no issues (still wasn't charging, sitting at 73%), now with it running in front of me (not the computer I am using to type this response) the LED is still orange and the message I get now is "99% available (plugged in, charging)".
    So for the moment it appears to have righted its self which is a concern, I hope that it stays this way....
    JJ

  • Can't access root share sometimes and some strange performance issues

    Hi :)
    I'm sometimes getting error 0x80070043 "The network name cannot be found" when accessing \\dc01 (the root), but can access shares via \\dc01\share.
    When I get that error I also didn't get the network drive hosted on that server set via Group Policy, it fails with this error:
    The user 'W:' preference item in the 'GPO Name' Group Policy Object did not apply because it failed with error code '0x80070008 Not enough storage is available to process this command.' This error was suppressed.
    The client is Windows Server 2012 Remote Desktop and file server is 2012 too. On a VMware host.
    Then I log off and back on, and no issues.
    Maybe related and maybe where the problem is: When I have the issue above and sometimes when I don't (the network drive is added fine) I have some strange performance issues on share/network drive: Word, Excel and PDF files opens very slowly. Offices says
    "Contacting \\dc01\share..." for 20-30 sec and then opens. Text files don't have that problem.
    I have a DC02 server also 2012 with no issues like like this.
    Any tips how to troubleshoot?

    Hi,
    Based on your description, you could access shares on DC via
    \\dc01\share. But you couldn’t access shares via \\dc01.
    Please check the
    Network Path in the Properties of the shared folders at first. If the network path is
    \\dc01\share, you should access the shared folder by using
    \\dc01\share.
    And when you configure
    Drive Maps via domain group policy, you should also type the Network Path of the shared folders in the
    Location edit.
    About opening Office files very slow. There are some possible reasons.
     File validation can slow down the opening of files.
     This problem caused by the issue mentioned above.
    Here are a similar thread about slow opening office files from network share
    http://answers.microsoft.com/en-us/office/forum/office_2010-word/office-2010-slow-opening-files-from-network-share/d69e8942-b773-4aea-a6fc-8577def6b06a
    For File Validation, please refer to the article below,
    Office 2010 File Validation
    http://blogs.technet.com/b/office2010/archive/2009/12/16/office-2010-file-validation.aspx
    Best Regards,
    Tina

  • Ipod or nike ipod issue

    Hi all. I have a problem with my ipod and don't know if it's the ipod, the usb, the nike receiver, the nike sensor or what. I turned it on today to do my workout. As usual, the voice told me to walk around to activate the shoe sensor. But nothing activates, the ipod says, "No Sensor" and everything on the ipod screen is frozen. Can't even turn the ipod off. So I disconnected the nike receiver, tried to connect to my laptop with the USB and resynch it, but still everything is frozen. Any ideas - now it seems like an ipod issue - not just a nike sensor issue. Thanks much for any advice.

    I have same problem. I complete 2 or 3 a day but the ipod only keeps info for the last workout. So when you download onto Nike+ you lose all but the latest workout. I can find no way of saving individual workouts on the ipod (3rd generation) at the end of each workout. Nothing on the Apple website on this.

Maybe you are looking for