Strange issue during Clustware installation !!

Hello everyone !!
I have come across a very strange problem.. During CRS installation when i come to Cluster configuration it does not show me any public/private/virtual interface name , on top of it ..Add/delete/edit buttons are disabled..
What could be the reason ? I am thinking to something to do with IP address...
Below is the hosts file.. (though 10 network segment is private bt i have done a configuration which utlizes 10 segment in HP-UX).
Environment is : Oracle 10g With Clusterware 10g R2
OS : AIX 5.3
Any suggestions please ?

Hosts file looks like..
127.0.0.1 localhost.localdomain localhost
10.152.1.12 anche.abcsoftware.com anche
192.168.0.101 anche-priv.abcsoftware.com anche-priv
10.152.1.20 anche-vip.abcsoftware.com anche-vip
10.152.1.14 zibal.abcsoftware.com zibal
192.168.0.102 zibal-priv.abcsoftware.com zibal-priv
10.152.1.21 zibal-vip.abcsoftware.com zibal-vip
1) cluvfy says both nodes are reachable
2)
./runcluvfy.sh stage -pre crsinst -n anche,zibal
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "anche".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking administrative privileges...
User existence check passed for "oracle".
Group existence check passed for "oinstall".
Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Node connectivity check passed for subnet "10.152.1.0" with node(s) zibal,anche.
Node connectivity check passed for subnet "10.152.10.0" with node(s) zibal,anche.
Suitable interfaces for the private interconnect on subnet "10.152.1.0":
zibal en0:10.152.1.14
anche en0:10.152.1.12
Suitable interfaces for the private interconnect on subnet "10.152.10.0":
zibal en1:10.152.10.14
anche en1:10.152.10.12
ERROR:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check failed.
Please let me know your views.... I am not getting with this anywhere :(

Similar Messages

  • IPV6 issues during the installation? "error: failed retrieving file"

    Hi!
    I currently try to install Arch on my Notebook using the Newbie Guide from the German Arch Wiki. Everything seemed to work fine until I got to the point of installing the base system using
    pacstrap /mnt base base-devel wpa_supplicant
    . The downloading process fails and returns about the same error message for every mirror:
    error: failed retrieving file 'core.db' from MIRRORNAME : Resolving timed out after XY milliseconds
    I already tried to use different mirrors, but none of them worked. I tried to reach them on another machine via the browser and could access them, so they're definitly up. It therefore could be my internet connection, but I'm connected via an ethernet cable and can ping e.g. google.com or archlinux.org without any problems. I looked up the issue on different forums and almost everyone said that it's an issue caused by ipv6; I tried different workarounds, but none of them worked since most of them were used on an Arch system that was already installed but had problems with pacman. Due to the fact that I'm encountering this problem on a CD that I try to install Arch with, most of the files I'm supposed to edit to disable ipv6 aren't there (yet?) - and the other workarounds just didn't work. I really want to install Arch on my system, but can't continue with the installation when pacman can't reach the mirrors.
    I therefore need your help to solve this; like I said, it's probably an issue with ipv6, but I just can't find out how to disable it on my installation medium (I burned the archlinux-2014.11.01-dual.iso on it, if that matters).
    Last edited by Nex (2014-11-15 15:05:06)

    run ping6 -c 4 google.com and post the output.
    alss post the output of :
    ip addr
    ip route -4
    ip route -6
    Last edited by Lone_Wolf (2014-11-15 16:37:13)

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

    adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
    I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

    This did not resolve my issue, it actually made things worse. I did what
    you had told me to do below, and it did not work. Tried to access the
    internet to respond back to you and my computer was not able to reach the
    internet. Tried reaching adobe support and not was able to, even tried
    calling was on the phone for 20 minutes and no one answered. I was not able
    to re install windows. Contacted Asus from another computer and they were
    not able to help me reinstall windows They had asked me to ship my computer
    back to them, due to them not being able to resolve the issue and help me
    reinstall windows. I luckily had a backup on my external hard drive and was
    able to reinstall windows 8. Spent over an hour and half trying to fix
    that. Here I am still not able to install adobe reader. I was very unhappy
    with what I was told to do and it gave me this issue.
    ·  Open an Administrator command prompt: Right-click Start > All Programs >
    Accessories > Command Prompt and select Run As Administrator. Click Allow
    for the elevation prompt
    ·  In the command prompt, type the command below:
    fsutil resource setautoreset true C:\
    The line above assumes that C: is the drive in which Vista is installed. If
    it is installed on another drive like D:, change the drive letter
    appropriately.
    ·  Restart the system.
    ·  Install Acrobat or Adobe Reader again.

  • Issue during installation of Acrobat 9 Pro Extended trial version

    Hello,
    I have a problem during the installation of Acrobat 9 Pro Extended trial version. I downloaded the version from the Adobe website (so I have donwloaded APEX9_Win_WEB_WWEFG.exe and APEX9_Win_WEB_WWEFG.7z files).
    After that I copied the files to another computer (a virtual machine to be more precise). I launched the exe file and all seems ok. At the end of the extraction I have this message : "An error occurs during the extraction of some files. Check the disk space and the access rigths of the folders". It is a translation of the french message because I tried with the english and the french trial version (both not working).
    Does somebody already has this problem during the installation of a trial version?
    Thanks in advance,

    I cannot speak for the trial or Vista, but Pro 9 Extended works well
    with XP SP3 under Parallels.
    Mike

  • ORA-39165: During Expdp Strange Issue

    Hi All,
    DB -- 11.1.0.6.0
    OS --HPUX Itanium.
    Today , I came across with one strange issue , where EXPDP tells us the scehma does not exist. we then tried to look into this this particular schema into the database and discovered it's does exist there. One wearied thing is that , all the tables inside this schema are of same size and have bit strange naming convention.I also discovered the same issue with one more database on the same host.
    CPMDVFDM> Total estimation using BLOCKS method: 0 KB
    ORA-39165: Schema WMSYS was not found.
    ORA-31655: no data or metadata objects selected for job
    Job "SYS"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 11:02:43
    [1] +  Done(5)                    expdp  \'/ as sysdba\' directory=data_pump_dir1 logfile=wmsys.log schemas=wmsys &
    SQL> select table_name from dba_tables where owner='WMSYS';
    TABLE_NAME
    WM$RIC_TABLE
    WM$RIC_TRIGGERS_TABLE
    WM$INSTEADOF_TRIGS_TABLE
    WM$WORKSPACES_TABLE
    WM$VERSION_TABLE
    WM$NEXTVER_TABLE
    WM$VERSION_HIERARCHY_TABLE
    WM$VERSIONED_TABLES
    MAX(BYTES) SEGMENT_NAME
         65536 WM$RIC_TRIGGERS_TABLE
         65536 WM$WORKSPACES_TABLE
         65536 WM$MODIFIED_TABLES
         65536 WM$NEXTVER_TABLE
         65536 WM$CONS_COLUMNS
         65536 WM$MP_PARENT_WORKSPACES_TABLE
         65536 WM$LOG_TABLE
         65536 WM$ADT_FUNC_TABLE
         65536 WM$UDTRIG_INFO
         65536 WM$VT_ERRORS_TABLE
         65536 WM$NESTED_COLUMNS_TABLE
    MAX(BYTES) SEGMENT_NAME
         65536 WM$VERSIONED_TABLES
         65536 WM$RESOLVE_WORKSPACES_TABLE
         65536 WM$LOCKROWS_INFO
         65536 WM$MP_GRAPH_WORKSPACES_TABLE
         65536 WM$BATCH_COMPRESSIBLE_TABLES
         65536 WM$TMP_DBA_CONSTRAINTS
         65536 WM$RIC_LOCKING_TABLE
         65536 AQ$_WM$EVENT_QUEUE_TABLE_S
         65536 WM$INSTEADOF_TRIGS_TABLE
         65536 WM$VERSION_TABLE
         65536 WM$VERSION_HIERARCHY_TABLE
    MAX(BYTES) SEGMENT_NAME
         65536 WM$WORKSPACE_PRIV_TABLE
         65536 WM$WORKSPACE_SAVEPOINTS_TABLE
         65536 WM$UDTRIG_DISPATCH_PROCS
         65536 WM$REPLICATION_TABLE
         65536 WM$CONSTRAINTS_TABLE
         65536 WM$EVENTS_INFO
         65536 WM$LOG_TABLE_ERRORS
         65536 WM$REMOVED_WORKSPACES_TABLE
         65536 WM$HINT_TABLE
         65536 WM$RIC_TABLE
         65536 WM$ENV_VARS
    MAX(BYTES) SEGMENT_NAME
         65536 WM$SYSPARAM_ALL_VALUES
         65536 WM$EVENT_QUEUE_TABLE
         65536 SYS_IOT_OVER_12359
         65536 WM$REPLICATION_DETAILS_TABLERegards

    This is not true, there is a set of schemas that Data Pump knows are really not user schemas and therefore are not exported. Most contain sys, but they don't have to.
    If you created a schema called sysxyz, it would be exported.
    Dean

  • AlwaysOn AG issue during backup

    Hi everyone,
    I've a strange issue on our AlwaysOn Cluster  Sql Server 2012 Enterprise multi-instance, I'm evaluating to open a support case to MS but I would share the issue with the community before going on.
    Sql server are dedicated to host Sharepoint 2010 farm content databases.
    Scenario
    n.2 VM (hypervisor ESX 5.1) Windows Server 2008 R2; each vm has 2 virtual disk, and 4 raw-mapped disk
    each VM has MSFC role installed; quorum model is "file share majority"; no shared disk are mapped to clustered services.
    each vm host a Sql Server 2012 enterprise installation; each VM host n.3 SQL named instance (Development, Testing, Production)
    there are 3 Availability Group configured, one for each named-instance.
    Raw-Mapped disk are configured in this way: raw1(500GB) for sql data, raw2(500GB) for t-log; raw3 and raw4 are dynamic disk configured in spanning mode (500+500GB) as sql backup repository.
    Issue
    note: This issue came out recently (while entire enviroment is on production since 1 year)
    Our full backup job include a backup checksum and VERIFY.
    Since a couple of weeks, this verify on a particular contentdb (CrawlStoreDB, around 80GB) cause the availability group to go in an unhealty state (RESOLVING).
    From CLUSTER DIAGNOSTIC EXTENDED EVENT LOG I see this entries:
    info_message    2013-05-27 15:44:42.4845706    [hadrag] SQLFetch() returns -1 with following information 
    info_message    2013-05-27 15:44:42.4845706    [hadrag] ODBC Error: [42000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Could not serialize the data for node 'filePath' because it contains a character (0x0000)
    which is not allowed in XML. To retrieve this data convert it to binary, varbinary or image data type (6842)
    info_message    2013-05-27 15:44:42.4845706    [hadrag] No more diagnostics results
    info_message    2013-05-27 15:44:42.4845706    [hadrag] Discard the pending result sets  
    info_message    2013-05-27 15:44:42.4845706    [hadrag] ODBC Error: [24000] [Microsoft][SQL Server Native Client 11.0]Invalid cursor state (0)  
    From AlwaysOn health event file
    availability_replica_state_change    2013-05-27 15:45:02.6615881    PRIMARY_NORMAL    RESOLVING_NORMAL    CABD99D4-8591-4B37-9160-6738DAE9C851
    From Failover Cluster Manager Events
    Cluster resource 'AGPROD' in clustered service or application 'AGPROD' failed.
    The Cluster service failed to bring clustered service or application 'AGPROD' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
    this situation remains "looping" for 1 hour, unless forcing a manual failover in SMSS; during this hour, the availability group is unreachble (RESOLVING)
    If I deactivate the VERIFY on backup job, the issue doesn't happen.
    Any idea to point out the problem?

    The cluster is running a query that fails with SQL Error 6842 (Could not serialize the data for node 'filePath' because it contains a character (0x0000) which is not allowed in XML. To retrieve this data convert it to binary, varbinary or image data type
    (6842)".
    My guess is that the cluster is running the SQL Instance health check procedure
    sp_server_diagnostics which returns a VARCHAR(MAX) column filled with XML, and that some diagnostic data has a column 'filePath' that has an embedded null value (0x000), which is causing
    an XML conversion error.  As to why it happens on backup verification, it's probably because the diagnostics returns information about the backup process, and one of the files involved has the embedded null value.
    You can try to run this and see if it repros the issue.
    declare @t table
    create_time datetime,
    component_type varchar(200),
    component_name varchar(200),
    state int,
    state_desc varchar(20),
    data xml
    insert into @t
    exec sp_server_diagnostics
    select * from @t
    But this is probably a case for support.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I am having an issue as well, I think it is ongoing for everyone who is trying to update.

  • PASSWORDLESS SSH SETUP fails during Grid installation

    Hello,
    OS and VM setup:
    There are 2 base physical Oracle servers ( Model # Oracle SPARC T4-2 , Solaris 11.1 ). On both machine “Oracle VM for SPARC “ software is installed and logical domains are configured with Solaris 11.1. Oracle RAC 2 node cluster is being setup between the Logical Domain in each servers.
    Objective:
    We are planning to install and configure Oracle RAC 11g R2 (11.2.0.4) on two Oracle VM machines. Pre-installation check script (runcluvfy.sh) on RAC node is completed without errors/warning.
    Issue:
    During oracle grid infrastructure installation, SSH setup failing and on shell prompt is showing JVM CRASH AT LIB.....
    I am not able to proceed with RAC setup due to this issue. 
    Your suggestions/assistance will be greatly appreciated.
    Thanks.

    Hello,
    Thanks for your reponse. Please find below OUI log:
    -------------------------------------------------------- OUI Log ---------------------------------------------------------
    Using paramFile: /u01/Stage/grid/install/oraparam.ini
    Checking Temp space: must be greater than 180 MB.   Actual 190266 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 196682 MB    Passed
    Checking monitor: must be configured to display at least 256 colors    Failed <<<<
        >>> Could not execute /usr/bin/xdpyinfo
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,Continue? (y/n) [n]
    >>> Ignoring required pre-requisite failures. Continuing...
    The commandline for unzip:
    /u01/Stage/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.51.10/1/DataFiles/\*.jar -d /tmp/OraInstall2013-10-30_10-00-46AM
    Using the umask value '022' available from oraparam.ini
    Execvp of the child jre : the cmdline is /tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre/bin/java, and the argv is
    /tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre/bin/java
    -Doracle.installer.library_loc=/tmp/OraInstall2013-10-30_10-00-46AM/oui/lib/solaris
    -Doracle.installer.oui_loc=/tmp/OraInstall2013-10-30_10-00-46AM/oui
    -Doracle.installer.bootstrap=TRUE
    -Doracle.installer.startup_location=/u01/Stage/grid/install
    -Doracle.installer.jre_loc=/tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre
    -Doracle.installer.nlsEnabled="TRUE"
    -Doracle.installer.prereqConfigLoc=
    -Doracle.installer.unixVersion=5.11
    -Doracle.install.setup.workDir=/u01/Stage/grid
    -Dawt.toolkit=sun.awt.X11.XToolkit
    -d64
    -mx150m
    -cp
    /tmp/OraInstall2013-10-30_10-00-46AM::/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/instcommon.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/instcrs.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/ssh.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/cvu.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/jsch.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/ojdbc5.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/oneclick.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/share.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/emCfg.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/emocmutl.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jsch.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ssh.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/http_client.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraSuiteInstaller.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstImages.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/help4.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/help4-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/swingaccess.jar::/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jewt4.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ojmisc.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/xml.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/srvm.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/srvmasm.jar
    oracle.install.ivw.crs.driver.CRSInstaller
    -scratchPath
    /tmp/OraInstall2013-10-30_10-00-46AM
    -sourceLoc
    /u01/Stage/grid/install/../stage/products.xml
    -sourceType
    network
    -timestamp
    2013-10-30_10-00-46AM
    -formCluster
    INFO: Loading data from: jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Loading beanstore from jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:config-data]
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:id in the bean:configcmd
    INFO: Setting value for the property:platformcmdmap in the bean:configcmd
    INFO: Setting value for the property:configcmds in the bean:configcmdmappings
    INFO: Inventory exists: false
    INFO: Registering setup bean
    INFO: Building Flow
    INFO: Loading condition class oracle.install.commons.flow.condition.SystemPropertyCondition
    INFO: Building the flow graph
    INFO: Loaded state AutoUpdatesOptionsUI
    INFO: Loaded state UpdatesListUI
    INFO: Loaded state finishupdates
    INFO: Building the flow graph
    INFO: Loaded state init
    INFO: Loaded state autoupdatesDecider
    INFO: Loaded state AutoUpdatesOptionsUI
    INFO: Loaded state UpdatesListUI
    INFO: Loaded state supportedOSCheck
    INFO: Loaded state ClusterInfoUI
    INFO: Loaded state InstallOptionsUI
    INFO: Loaded state ChecklistUI
    INFO: Loaded state InstallTypeUI
    INFO: Loaded state QuickInstallUI
    INFO: Loaded state productLanguage
    INFO: Loaded state flowDecider
    INFO: Loaded state CRSNodeSelectionUI
    INFO: Loaded state SCANInformationUI
    INFO: Loaded state getASMSNMPPassword
    INFO: Loaded state GridPlugPlayInfoUI
    INFO: Loaded state CRSNodeInformationUI
    INFO: Loaded state getSubnetInformation
    INFO: Loaded state ConfigWizard
    INFO: Loaded state NetworkInterfaceUI
    INFO: Loaded state StorageOptionUI
    INFO: Loaded state ASMDiskGroupOption
    INFO: Loaded state CreateASMDiskGroup
    INFO: Loaded state ASMInstanceCredentialsGUI
    INFO: Loaded state OCRStorageUI
    INFO: Loaded state VDSKStorageUI
    INFO: Loaded state FailureIsolationUI
    INFO: Loaded state getPrivilegedOSGroups
    INFO: Loaded state preInstallLocation
    INFO: Loaded state InstallLocationUI
    INFO: Loaded state CRSInstallLocationUI
    INFO: Loaded state inventory
    INFO: Loaded state prereqExecutionDecider
    INFO: Loaded state performChecks
    INFO: Loaded state showSummary
    INFO: Loaded state setup
    INFO: Loaded state finish
    INFO: Linking states
    INFO: State[ASMDiskGroupOption]: route=createdg; to=CreateASMDiskGroup
    INFO: State[ASMDiskGroupOption]: route=nocreatedg; to=ASMInstanceCredentialsGUI
    INFO: Condition of state[ASMDiskGroupOption]: route=mismatched; to=CreateASMDiskGroup
    INFO: State[ASMInstanceCredentialsGUI]: route=FRESH_HA_INSTALL; to=getPrivilegedOSGroups
    INFO: State[ASMInstanceCredentialsGUI]: route=IPMI_SUPPORTED; to=FailureIsolationUI
    INFO: State[ASMInstanceCredentialsGUI]: route=IPMI_UNSUPPORTED; to=getPrivilegedOSGroups
    INFO: Condition of state[ASMInstanceCredentialsGUI]: route=inventory; to=inventory
    INFO: Condition of state[ASMInstanceCredentialsGUI]: route=prereq; to=prereqExecutionDecider
    INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=supportedOSCheck
    INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
    INFO: State[CRSInstallLocationUI]: route=INVENTORY_ABSENT; to=inventory
    INFO: State[CRSInstallLocationUI]: route=success; to=prereqExecutionDecider
    INFO: Condition of state[CRSInstallLocationUI]: route=matched; to=prereqExecutionDecider
    INFO: State[CRSNodeInformationUI]: route=success; to=getSubnetInformation
    INFO: State[CRSNodeSelectionUI]: route=GI_HOME_UPGRADE; to=getPrivilegedOSGroups
    INFO: State[CRSNodeSelectionUI]: route=NON_GI_HOME_UPGRADE; to=SCANInformationUI
    INFO: State[CRSNodeSelectionUI]: route=wizard; to=ConfigWizard
    INFO: State[ChecklistUI]: route=success; to=InstallTypeUI
    INFO: State[ClusterInfoUI]: route=success; to=QuickInstallUI
    INFO: State[ConfigWizard]: route=config; to=NetworkInterfaceUI
    INFO: State[ConfigWizard]: route=giupgrade; to=prereqExecutionDecider
    INFO: State[ConfigWizard]: route=upgrade; to=SCANInformationUI
    INFO: State[CreateASMDiskGroup]: route=success; to=ASMInstanceCredentialsGUI
    INFO: State[FailureIsolationUI]: route=success; to=getPrivilegedOSGroups
    INFO: State[GridPlugPlayInfoUI]: route=success; to=CRSNodeInformationUI
    INFO: State[InstallLocationUI]: route=INVENTORY_ABSENT; to=inventory
    INFO: State[InstallLocationUI]: route=success; to=prereqExecutionDecider
    INFO: State[InstallOptionsUI]: route=crs; to=InstallTypeUI
    INFO: State[InstallOptionsUI]: route=success; to=productLanguage
    INFO: State[InstallTypeUI]: route=advanced; to=productLanguage
    INFO: State[InstallTypeUI]: route=typical; to=ClusterInfoUI
    INFO: Condition of state[InstallTypeUI]: route=matched; to=productLanguage
    INFO: State[NetworkInterfaceUI]: route=success; to=StorageOptionUI
    INFO: State[OCRStorageUI]: route=success; to=VDSKStorageUI
    INFO: State[QuickInstallUI]: route=ASM; to=CreateASMDiskGroup
    INFO: State[QuickInstallUI]: route=inventory; to=inventory
    INFO: State[QuickInstallUI]: route=prereq; to=prereqExecutionDecider
    INFO: State[SCANInformationUI]: route=noupgradeASM; to=getPrivilegedOSGroups
    INFO: State[SCANInformationUI]: route=upgradeASM; to=getASMSNMPPassword
    INFO: State[StorageOptionUI]: route=ASM; to=ASMDiskGroupOption
    INFO: State[StorageOptionUI]: route=SHARED_FILE_SYSTEM; to=OCRStorageUI
    INFO: State[UpdatesListUI]: route=success; to=supportedOSCheck
    INFO: State[VDSKStorageUI]: route=IPMI_SUPPORTED; to=FailureIsolationUI
    INFO: State[VDSKStorageUI]: route=IPMI_UNSUPPORTED; to=getPrivilegedOSGroups
    INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_DISABLE; to=supportedOSCheck
    INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_STATE_SKIP; to=supportedOSCheck
    INFO: State[autoupdatesDecider]: route=success; to=AutoUpdatesOptionsUI
    INFO: Condition of state[autoupdatesDecider]: route=matched; to=InstallOptionsUI
    INFO: State[flowDecider]: route=FRESH_CRS_INSTALL; to=GridPlugPlayInfoUI
    INFO: State[flowDecider]: route=FRESH_HA_INSTALL; to=CreateASMDiskGroup
    INFO: State[flowDecider]: route=SWONLY_INSTALL; to=getPrivilegedOSGroups
    INFO: State[flowDecider]: route=UPGRADE_CRS; to=CRSNodeSelectionUI
    INFO: State[flowDecider]: route=UPGRADE_HA; to=getASMSNMPPassword
    INFO: State[flowDecider]: route=UPGRADE_HA_NO_ASM_PASS; to=getPrivilegedOSGroups
    INFO: State[getASMSNMPPassword]: route=success; to=getPrivilegedOSGroups
    INFO: State[getPrivilegedOSGroups]: route=success; to=preInstallLocation
    INFO: Condition of state[getPrivilegedOSGroups]: route=matched; to=preInstallLocation
    INFO: State[getSubnetInformation]: route=success; to=NetworkInterfaceUI
    INFO: State[getSubnetInformation]: route=wizard; to=ConfigWizard
    INFO: State[init]: route=DOWNLOAD_UPDATES_ONLY; to=AutoUpdatesOptionsUI
    INFO: State[init]: route=success; to=autoupdatesDecider
    INFO: State[inventory]: route=success; to=prereqExecutionDecider
    INFO: State[performChecks]: route=success; to=showSummary
    INFO: State[preInstallLocation]: route=CRS_NO; to=InstallLocationUI
    INFO: State[preInstallLocation]: route=CRS_YES; to=CRSInstallLocationUI
    INFO: Condition of state[preInstallLocation]: route=matched; to=CRSInstallLocationUI
    INFO: State[prereqExecutionDecider]: route=executeprereqs; to=performChecks
    INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=showSummary
    INFO: State[productLanguage]: route=productlanguage_yes; to=flowDecider
    INFO: Condition of state[productLanguage]: route=matched; to=flowDecider
    INFO: State[setup]: route=success; to=finish
    INFO: State[showSummary]: route=success; to=setup
    INFO: State[supportedOSCheck]: route=success; to=InstallOptionsUI
    INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=finishupdates
    INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
    INFO: State[UpdatesListUI]: route=DOWNLOAD_UPDATES_FINISHED; to=finishupdates
    INFO: Successfully built the flow
    INFO: Opening bean stores from which the beans can be loaded
    INFO: Loading beanstore from a given input stream
    INFO: Translating external format into raw format
    INFO: Loading flow data beans
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
    INFO: Setting value for the property:CRSInstallSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:oracle_install_asm_DiskGroup in the bean:ASMSettings
    INFO: Setting value for the property:ASMSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
    INFO: Setting value for the property:HAInstallSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:CentralInventorySettings in the bean:CRSSetupBean
    INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
    INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
    INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:OCMSettings in the bean:CRSSetupBean
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
    INFO: Setting value for the property:oracle_install_crs_SCANPortNumber in the bean:CRSInstallSettings
    INFO: Setting value for the property:oracle_install_crs_VotingDiskRedundancy in the bean:CRSInstallSettings
    INFO: Setting value for the property:oracle_install_crs_OCRRedundancy in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
    INFO: Setting value for the property:CRSInstallSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:oracle_install_asm_DiskGroupAUSize in the bean:oracle_install_asm_DiskGroup
    INFO: Setting value for the property:oracle_install_asm_DiskGroup in the bean:ASMSettings
    INFO: Setting value for the property:ASMSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
    INFO: Setting value for the property:HAInstallSettings in the bean:CRSSetupBean
    INFO: Setting value for the property:CentralInventorySettings in the bean:CRSSetupBean
    INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
    INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
    INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:CRSSetupBean
    INFO: Set value for bean CRSSetupBean
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
    INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
    INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
    INFO: Closing bean stores from which the beans can be loaded
    INFO: Registering the flow views
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
    INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
    INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.FinishGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.FinishGUI added to View Type Registry with the key as [FinishUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.InstallOptionsUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ChecklistGUI viewId: ChecklistUI uiType: null]
    INFO: oracle.install.ivw.crs.view.ChecklistGUI added to View Type Registry with the key as [ChecklistUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.InstallTypeGUI viewId: InstallTypeUI uiType: null]
    INFO: oracle.install.ivw.crs.view.InstallTypeGUI added to View Type Registry with the key as [InstallTypeUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.QuickInstallGUI viewId: QuickInstallUI uiType: null]
    INFO: oracle.install.ivw.crs.view.QuickInstallGUI added to View Type Registry with the key as [QuickInstallUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.InstallLocationUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.CRSInstallLocationGUI viewId: CRSInstallLocationUI uiType: null]
    INFO: oracle.install.ivw.crs.view.CRSInstallLocationGUI added to View Type Registry with the key as [CRSInstallLocationUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.GridPlugPlayInfoUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.GridPlugPlayInfoUI added to View Type Registry with the key as [GridPlugPlayInfoUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ClusterConfigGUI viewId: ClusterConfigUI uiType: null]
    INFO: oracle.install.ivw.crs.view.ClusterConfigGUI added to View Type Registry with the key as [ClusterConfigUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.NetworkInterfaceUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.NetworkInterfaceUI added to View Type Registry with the key as [NetworkInterfaceUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.StorageOptionUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.StorageOptionUI added to View Type Registry with the key as [StorageOptionUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ASMDiskGroupCreationGUI viewId: ASMDiskGroupCreationUI uiType: null]
    INFO: oracle.install.ivw.crs.view.ASMDiskGroupCreationGUI added to View Type Registry with the key as [ASMDiskGroupCreationUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.OCRStorageUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.OCRStorageUI added to View Type Registry with the key as [OCRStorageUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.VDSKStorageUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.VDSKStorageUI added to View Type Registry with the key as [VDSKStorageUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.FailureIsolationUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.FailureIsolationUI added to View Type Registry with the key as [FailureIsolationUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ASMInstanceCredentialsGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.ASMInstanceCredentialsGUI added to View Type Registry with the key as [ASMInstanceCredentialsGUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.CRSNodeSelectionUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.CRSNodeSelectionUI added to View Type Registry with the key as [CRSNodeSelectionUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.SCANInformationUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.SCANInformationUI added to View Type Registry with the key as [SCANInformationUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ClusterInfoUI viewId: ClusterInfoUI uiType: null]
    INFO: oracle.install.ivw.crs.view.ClusterInfoUI added to View Type Registry with the key as [ClusterInfoUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ASMSNMPPasswordGUI viewId: ASMSNMPPasswordGUI uiType: null]
    INFO: oracle.install.ivw.crs.view.ASMSNMPPasswordGUI added to View Type Registry with the key as [ASMSNMPPasswordGUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.AutoUpdatesOptionsUI viewId: AutoUpdatesOptionsUI uiType: null]
    INFO: oracle.install.ivw.common.view.AutoUpdatesOptionsUI added to View Type Registry with the key as [AutoUpdatesOptionsUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.UpdatesListUI viewId: UpdatesListUI uiType: null]
    INFO: oracle.install.ivw.common.view.UpdatesListUI added to View Type Registry with the key as [UpdatesListUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.FinishUpdatesUI viewId: FinishUpdatesUI uiType: null]
    INFO: oracle.install.ivw.common.view.FinishUpdatesUI added to View Type Registry with the key as [FinishUpdatesUI]
    INFO: Adding View[type: oracle.install.ivw.crs.view.ASMDiskGroupOptionGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.crs.view.ASMDiskGroupOptionGUI added to View Type Registry with the key as [ASMDiskGroupOptionUI]
    INFO: Initial values of Setup Properties :
    PROPERTY                                               VALUE                                     
    ASMSettings                                            oracle.install.asm.bean.ASMSettings@6124e9
                                                            35                                        
    AutoUpdatesInstallSettings                             oracle.install.ivw.common.bean.AutoUpdates
                                                            InstallSettings@3c03dfcb                  
    COLLECTOR_IGNORE_CONFIGURATION                         false                                     
    COLLECTOR_IGNORE_FAILURES                              false                                     
    COLLECTOR_RESPONSE_FILE                                                                          
    CRSInstallSettings                                     oracle.install.ivw.crs.bean.CRSInstallSett
                                                            ings@1fbbc779                             
    CentralInventorySettings                               oracle.install.ivw.common.bean.CentralInve
                                                            ntorySettings@3435ec9                     
    ClusterNodes                                           {}                                        
    ClusterwareType                                        UNKNOWN                                   
    DECLINE_SECURITY_UPDATES                               false                                     
    FROM_LOCATION                                          /u01/Stage/grid/install/../stage/products.
                                                            xml                                       
    HAInstallSettings                                      oracle.install.ivw.ha.bean.HAInstallSettin
                                                            gs@1faac07d                               
    MYORACLESUPPORT_PASSWORD                               *Protected value, not to be logged*       
    MYORACLESUPPORT_USERNAME                                                                         
    OCMSettings                                            oracle.install.ivw.common.bean.OCMSettings
                                                            @411b1d80                                 
    ORACLE_BASE                                            /u01/app/oracle/product/11.2.0.4/base     
    ORACLE_HOME                                            /u01/app/oracle/product/11.2.0.4/grid     
    ORACLE_HOSTNAME                                        oradbracvm1.mrmwr.gov.om                  
    PROXY_HOST                                                                                       
    PROXY_PORT                                                                                       
    PROXY_PWD                                              *Protected value, not to be logged*       
    PROXY_USER                                                                                       
    SECURITY_UPDATES_VIA_MYORACLESUPPORT                   true                                      
    SELECTED_LANGUAGES                                     {"en"}                                    
    oracle_install_WindowsSystemDirectory                                                            
    oracle_install_asm_DiskGroup                           oracle.install.asm.bean.DiskGroupSettings@
                                                            3e4ac866                                  
    oracle_install_asm_DiskGroupAUSize                     1                                         
    oracle_install_asm_MigrateASM                          false                                     
    oracle_install_asm_UseExistingDG                       false                                     
    oracle_install_autoupdates_httpProxyPort               0                                         
    oracle_install_autoupdates_httpProxySettings           oracle.install.ivw.common.bean.HttpProxySe
                                                            ttings@2bf09a31                           
    oracle_install_autoupdates_myOracleSupportCredentials  oracle.install.ivw.common.bean.MyOracleSup
                                                            portSettings@2259a735                     
    oracle_install_autoupdates_selected                    false                                     
    oracle_install_crs_AdvancedInstall                     false                                     
    oracle_install_crs_AutoConfig                          false                                     
    oracle_install_crs_ClusterName                                                                   
    oracle_install_crs_ClusterNodeList                                                               
    oracle_install_crs_ConfigureGNS                        true                                      
    oracle_install_crs_LaunchASMCA                         false                                     
    oracle_install_crs_LaunchCRSInst                       false                                     
    oracle_install_crs_LaunchCRSUpgrd                      false                                     
    oracle_install_crs_LaunchCluvfy                        false                                     
    oracle_install_crs_LaunchRootBat                       false                                     
    oracle_install_crs_LaunchUpdateNodeList                false                                     
    oracle_install_crs_OCRLocations                        {}                                        
    oracle_install_crs_OCRRedundancy                       2                                         
    oracle_install_crs_SCANName                                                                      
    oracle_install_crs_SCANPortNumber                      0                                         
    oracle_install_crs_StorageOption                       0                                         
    oracle_install_crs_UseIPMI                             false                                     
    oracle_install_crs_VotingDiskLocations                 {}                                        
    oracle_install_crs_VotingDiskRedundancy                2                                         
    oracle_install_crs_isConfigWizard                      false                                     
    oracle_install_crs_isRolling                           true                                      
    INFO: Launching Oracle Grid Infrastructure
    INFO: Started executing the flow in INTERACTIVE mode
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state init
    INFO: Waiting for completion all forked tasks at state init
    INFO: All forked task are completed at state init
    INFO: Completed background operations
    INFO: Executing action at state init
    INFO: Completed executing action at state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <init>
    INFO: Completed validating view at state <init>
    INFO: Validating state <init>
    WARNING: Validation disabled for the state init
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Checking condition at state <autoupdatesDecider>
    INFO: Successfully checked condition at state <autoupdatesDecider>
    INFO: Checking condition at state <InstallTypeUI>
    INFO: Successfully checked condition at state <InstallTypeUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state autoupdatesDecider
    INFO: Completed executing action at state <autoupdatesDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <autoupdatesDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <autoupdatesDecider>
    INFO: Completed validating view at state <autoupdatesDecider>
    INFO: Validating state <autoupdatesDecider>
    WARNING: Validation disabled for the state autoupdatesDecider
    INFO: Completed validating state <autoupdatesDecider>
    INFO: Reading shiphome metadata from /u01/Stage/grid/install/../stage/shiphomeproperties.xml
    INFO: Loading beanstore from file:/u01/Stage/grid/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/u01/Stage/grid/install/../stage/shiphomeproperties.xml
    INFO: Loading beans from Xml Bean Store. [BeanStoreName:shiphome-metadata]
    INFO: Setting value for the property:properties in the bean:shiphome-metadata
    INFO: Verifying route success
    INFO: Get view named [AutoUpdatesOptionsUI]
    INFO: View for [AutoUpdatesOptionsUI] is oracle.install.ivw.common.view.AutoUpdatesOptionsUI[,0,0,0x0,invalid,layout=java.awt.FlowLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
    INFO: Initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Completed initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Completed displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Completed loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Completed localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state AutoUpdatesOptionsUI
    INFO: Completed executing action at state <AutoUpdatesOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <AutoUpdatesOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <AutoUpdatesOptionsUI>
    INFO: Completed validating view at state <AutoUpdatesOptionsUI>
    INFO: Validating state <AutoUpdatesOptionsUI>
    INFO: Completed validating state <AutoUpdatesOptionsUI>
    INFO: No updates will be downloaded or applied
    INFO: Checking condition at state <InstallTypeUI>
    INFO: Successfully checked condition at state <InstallTypeUI>
    INFO: Verifying route NO_AUTO_UPDATES
    INFO: Checking condition at state <InstallTypeUI>
    INFO: Successfully checked condition at state <InstallTypeUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state supportedOSCheck
    INFO: Completed executing action at state <supportedOSCheck>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <supportedOSCheck>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <supportedOSCheck>
    INFO: Completed validating view at state <supportedOSCheck>
    INFO: Validating state <supportedOSCheck>
    INFO: Verifying target environment...
    INFO: Checking whether the IP address of the localhost could be determined...
    INFO: Completed verification of target environment.
    INFO: Verifying setup for installer validations
    INFO: Completed validating state <supportedOSCheck>
    INFO: Verifying route success
    INFO: Checking condition at state <InstallTypeUI>
    INFO: Successfully checked condition at state <InstallTypeUI>
    INFO: Get view named [InstallOptionsUI]
    INFO: View for [InstallOptionsUI] is oracle.install.ivw.crs.view.InstallOptionsUI@144683c2
    INFO: Initializing view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Is CRS Installed false
    INFO: Completed initializing view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Displaying view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Completed displaying view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Loading view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Completed loading view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Localizing view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Completed localizing view <InstallOptionsUI> at state <InstallOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state InstallOptionsUI
    INFO: InstallOption Action Entering and Exiting execute
    INFO: Completed executing action at state <InstallOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <InstallOptionsUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: CRS config selected
    INFO: Validating view at state <InstallOptionsUI>
    INFO: Completed validating view at state <InstallOptionsUI>
    INFO: Validating state <InstallOptionsUI>
    INFO: getInstallOption: CRS_CONFIG
    INFO: Is CRS Installed false
    INFO: isCRSInstalled: false
    INFO: isHAInstalled: false
    INFO: isCRSConfigured: false
    INFO: isHAConfigured: false
    INFO: isLocalCSSConfigured: false
    INFO: existingCRSOrLocalCSSVersion: null
    INFO: Completed validating state <InstallOptionsUI>
    INFO: Detecting system information
    INFO: InstallOptionsAction Actions.transition called
    INFO: Verifying route crs
    INFO: Checking condition at state <InstallTypeUI>
    INFO: Successfully checked condition at state <InstallTypeUI>
    INFO: Get view named [InstallTypeUI]
    INFO: View for [InstallTypeUI] is oracle.install.ivw.crs.view.InstallTypeGUI[,0,0,0x0,invalid,layout=java.awt.GridBagLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
    INFO: Initializing view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Completed initializing view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Displaying view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Completed displaying view <InstallTypeUI> at state <InstallTypeUI>
    INFO: checking for 92 RAC existence
    INFO: Loading view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Completed loading view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Localizing view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Gathering system details...
    INFO: Completed localizing view <InstallTypeUI> at state <InstallTypeUI>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state InstallTypeUI
    INFO: Waiting for completion all forked tasks at state InstallTypeUI
    INFO: All forked task are completed at state InstallTypeUI
    INFO: Completed background operations
    INFO: Executing action at state InstallTypeUI
    INFO: Completed executing action at state <InstallTypeUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <InstallTypeUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <InstallTypeUI>
    INFO: Completed validating view at state <InstallTypeUI>
    INFO: Validating state <InstallTypeUI>
    INFO: Completed validating state <InstallTypeUI>
    INFO: Verifying route advanced
    INFO: Checking condition at state <productLanguage>
    INFO: Successfully checked condition at state <productLanguage>
    INFO: Checking condition at state <getPrivilegedOSGroups>
    INFO: Successfully checked condition at state <getPrivilegedOSGroups>
    INFO: Checking condition at state <preInstallLocation>
    INFO: Successfully checked condition at state <preInstallLocation>
    INFO: Checking condition at state <CRSInstallLocationUI>
    INFO: Successfully checked condition at state <CRSInstallLocationUI>
    INFO: Get view named [ProductLanguageUI]
    INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@3ff5d699
    INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Fetching Available Languages...
    INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state productLanguage
    INFO: Waiting for completion all forked tasks at state productLanguage
    INFO: All forked task are completed at state productLanguage
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: The languages in which the product will be installed are [ar, en]
    INFO: Validating view at state <productLanguage>
    INFO: Completed validating view at state <productLanguage>
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Checking condition at state <getPrivilegedOSGroups>
    INFO: Successfully checked condition at state <getPrivilegedOSGroups>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state flowDecider
    INFO: Completed executing action at state <flowDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <flowDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <flowDecider>
    INFO: Completed validating view at state <flowDecider>
    INFO: Validating state <flowDecider>
    WARNING: Validation disabled for the state flowDecider
    INFO: Completed validating state <flowDecider>
    INFO: Verifying route FRESH_CRS_INSTALL
    INFO: Checking condition at state <getPrivilegedOSGroups>
    INFO: Successfully checked condition at state <getPrivilegedOSGroups>
    INFO: Checking condition at state <preInstallLocation>
    INFO: Successfully checked condition at state <preInstallLocation>
    INFO: Checking condition at state <CRSInstallLocationUI>
    INFO: Successfully checked condition at state <CRSInstallLocationUI>
    INFO: Get view named [GridPlugPlayInfoUI]
    INFO: View for [GridPlugPlayInfoUI] is oracle.install.ivw.crs.view.GridPlugPlayInfoUI@42293b53
    INFO: Initializing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: GridPlugPlayInfoUI entering onEvent
    INFO: Gathering system details...
    INFO: Gathering system details...
    INFO: Gathering system details...
    INFO: Gathering system details...
    INFO: Gathering system details...
    INFO: checking for 92 RAC existence
    INFO: Gathering system details...
    INFO: Completed initializing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Displaying view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Completed displaying view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Loading view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: GridPlugPlayInfoUI entering onEvent
    INFO: Completed loading view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Localizing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Completed localizing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state GridPlugPlayInfoUI
    INFO: Completed executing action at state <GridPlugPlayInfoUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <GridPlugPlayInfoUI>
    INFO: Bad Chars Found :_
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: GridPlugPlayInfoUI entering processInput
    INFO: Validating view at state <GridPlugPlayInfoUI>
    INFO: Completed validating view at state <GridPlugPlayInfoUI>
    INFO: Validating state <GridPlugPlayInfoUI>
    INFO: Validating Cluster Name
    INFO: Validating SCAN Information
    INFO: validating SCAN name for emptiness and bad chars
    INFO: validating SCAN port for emptiness
    INFO: validating SCAN port for bad characters
    INFO: checking for 92 RAC existence
    INFO: Gathering system details...
    INFO: Environment variable SKIP_ALL_SCAN_VIP_VALIDATION is not set.
    INFO: Validating SCAN VIP
    INFO: Completed validating state <GridPlugPlayInfoUI>
    INFO: Verifying route success
    INFO: GridPlugPlayInfoUI entering onEvent
    INFO: Get view named [ClusterConfigUI]
    INFO: View for [ClusterConfigUI] is oracle.install.ivw.crs.view.ClusterConfigGUI@2a134eca
    INFO: Initializing view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Completed initializing view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Displaying view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Completed displaying view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Loading view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Completed loading view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Localizing view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Completed localizing view <ClusterConfigUI> at state <CRSNodeInformationUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state CRSNodeInformationUI
    INFO: Checking cluster configuration details
    INFO: checking for 92 RAC existence
    INFO: Gathering system details...
    INFO: Gathering system details...
    INFO: Completed executing action at state <CRSNodeInformationUI>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <CRSNodeInformationUI>
    INFO: SSH Support Manager logs will be written to /tmp/OraInstall2013-10-30_10-00-46AM/sshsetup1_2013-10-30_10-00-46AM.log
    INFO: Establishing SSH connectivity between the selected nodes. This may take several minutes. Please wait...
    INFO: SSH Setup policy used: BIDIRECTIONAL
    ------------------------------------------------------------ End OUI Logs -----------------------------------------------------------------------------------
    Thanks.

  • Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

    Hello,
    I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
    This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
    What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
    If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
    Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
    Thanks,
    Andrew

    Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
    At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
    Thanks

  • ITunes / Quicktime won't install - error message during in installation

    My computer, a Dell running with Windows Vista, has not been able to have iTunes & Quicktime installed on it in months. I've attempted to install it a countless number of times & tried a variety of things with my computer to install it but it just doesn't work - I get the same error message everytime. I can't even remember what happened to make it start acting so ridiculous.
    It always starts out looking good and everything seems to be working pretty well, the green bar filling up pretty quickly, but then the 'Status' gets to about 'Publishing product information' and the error message pops up and I can't install it. It goes along the lines of "A error occurred during the installation of assembly: ..." then it goes on to say 'Please refer to Help and Support for more information. HRESULT: 0x8007054F'. Here's a screenshot of the error message with the long whatever on it:
    http://i46.tinypic.com/qoesm1.png
    I believe I get the same message even when I attempt to download the two software separately (iTunes & Quicktime).
    Can any one tell me what needs to be done? I have no idea what to try anymore. All help will be much appreciated. Thank you .
    P.S.: If it helps, I can't really reinstall Internet Explorer (removed it when I downloaded Firefox).

    Thanks!
    (3) And I do not believe I have Microsoft Visual C++ 2005 installed on this computer, as I just tried to install it and I received this error message: http://i45.tinypic.com/a3m7bc.png
    Okay ... that rules out one possible treatment. Sometimes people with the redistributable installed can get past this by applying a security update for it ... but it looks like the same sorts of problems are preventing it from installing.
    (2) And last time I checked my History I had several failures I believe, however now I only see one failed update, that being Update for Windows (KB944036). The error code listed 8000FFFF. Apparently it's an update for Internet Explorer 8.
    The other primary strategy we (I?) have for dealing with these is to attempt to treat any underlying issues on the PC that prevent Windows Updates from installing. Although I have a sneaking suspicion that your 8000FFFF is related to your IE being uninstalled, I think we'd probably better try following up on the following document:
    [Error when you download updates using Windows Update or Microsoft Update: 8000FFFF|http://support.microsoft.com/kb/946414]
    After applying those measures, do your Windows update and/or iTunes installation failures clear up?

  • Error occurred during the installation of assembly 'Microsoft.VC80.CRT... blah blah.. HELP!

    I've been getting errors completely randomly.. I've yet to DL Itunes until recently and as I tried to start it up (with a seemingly perfectly fine installation I get this fat *** error.. error is as follows below.
    An error occoured during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to HELP and Support for more information. HRESULT: 0X80070216
    ^This was a pain in the ******* to rewrite as it wouldnt let me copy and paste. Please help me : /

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

    i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
    I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • Multiple Idocs creation based on source conditions

    Dear All, I have to create multiple idocs from the source idoc based on the line litems ie if my source Idocs has 5 line items so 5 different idocs to be generated at target. I am able to process upto this stage. Now my requirement is that target Ido

  • Sys account with two password in 9i

    Hi Guys, I got a database that sys have two password. the db is 9.06 in 32 bit window. i do this as SQL> connect sys/EXPassword as sysdba Connected. SQL> connect sys/workingPw as sysdba Connected. S I find EXPassword in exp code that still works well

  • ITunes not displaying Japanese characters...

    Ever since a few days ago, iTunes stopped displaying Japanese characters for any of the songs that have them. They display right on the iPod and on my computer, and even if I re-type them, they continue being boxes. But if I copy and paste a section

  • Ibook display going dull, then light, then dull, then light-battery ok tho-death rattle?help?

    Wondering what is going on with my ibook. The display is going light, darker, light, darker, over and over. Computer has also been totally shutting down on its own from time to time, but starts up ok without any prob. Help? Luckily I just backed it u

  • [SOLVED]VIM errors

    When running VIM  i get those errors Subroutine new redefined at perl/TagsBase.vim line 36 (#1) (W redefine) You redefined a subroutine. To suppress this warning, say no warnings 'redefine'; eval "sub name { ... }"; Subroutine getBase redefined at pe