Strange issue in Mail

Hi,
Hope some one can help me. Just got this message in Mail (the window appears with the apple mail stamp):
+"The user name or password you entered for area “193.82.117.189” on 193.82.117.189:80 was incorrect. Make sure you’re entering them correctly, and then try again.+
+Your login information will be sent securely."+
Would you happen to know what caused this all of a sudden. My mail still works but every time I try and reply or open an item it comes up.
Thanks very much for your attention and help
Cheers,
Fabio

Hi,
I wouldn't sent it back or fill out any information.
Maybe some one is trying to get your IP address, I think.
Dimaxum

Similar Messages

Windows Vista and BPS0 - Strange issue

I just got a new HP Pavilion laptop with Vista and I have a strange issue:
All transactions work (SE80, RSA1, ...) except BPS0. The moment I enter TCode BPS0, I get completely logged out (all sessions). No error messages, no dumps. It just logs me out silently.
Is this happening only to me?
I use Windows Vista Home Premium edition and AMD Turion processor 64x2.
Any suggestions appreciated.
Thanks

i too recently bought hp pavillion and my problem is i cant able to logon it gives me error of 10054, connection broken, can you tell me which things restrict me to log on. any settings are there to be performed. do mail me, i have been trying from 2 week my id is [email protected]

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Issues with Mail Connection in iOS6

I have a weird issue that's been plaguing me since I upgraded to iOS 6. My company hosts its mail using an Apple Mail server running 10.5 (yes, outdated, we know and are migrating to Google). I used to have no problem connecting via IMAP to my mail account on my iPhone 4. I upgraded to iOS 6 and was receiving an error that mail could not connect to my work account. I deleted and re-added the account and it seemed to work until a few days later when the issue returned. I did a restore on my phone and again all seemed well. About two days later I upgraded to an iPhone 5. I migrated my data to it from my latest backup in iTunes, done the day prior (day after my restore). Everything was peachy until a week later when I began getting connection issues in Mail.app again. I deleted and re-added my account, this time it didn't work. I restored my phone, it worked...for another week. I began getting connection issues again. I've now found a reproducible pattern and horrible work-around and am wondering if anyone else is encountering this. Here are my steps:
Mail.app starts telling me it cannot connect to my account.
I delete the account and reboot the phone.
After reboot the account IS BACK. Seriously, it comes back after the first reboot 90% of the time.
I delete the account again and reboot my phone.
I verify the account is really deleted and re-add it, then it will work for about a week.
Ever so often when I reboot that first time the account appears to be deleted. If I re-add my account then it will not connect, I have to delete and reboot and if the account appears there again then I can delete it a second time and it will actually work when I re-add it after reboot. Sound confusing? It is. One time when I rebooted my phone ALL of my mail, contacts, calendar accounts deleted. That was awesome.
Am I all alone here? Do I have to totally restore the phone without restoring from backup? Since I've been using iOS since the first iPhone that latter answer is definitely not an easy one to comply with. So many things I'd have to re-download and configure.
Thanks for any help you can provide!

Okay everyone! I struggled with this problem for a long time, and I was just about to send a complaint to Spotify when it worked for me! See, I did a little different than before; this is the list I was going to file:
"1. I open Spotify from the application menu.
2. I choose "Online" mode.
3. My phone asks me how I want to connect to the Internet.
4. I pick "Easy WiFi".
5. I choose my WiFi network from the list.
6. Application seems to be signing me in.
7. My phone asks me again how I want to connect to the Internet.
8. I repeat the procedure. Spotify can't connect with WiFi.
-I have tried to connect using other WiFi networks, didn't work.
-Before I updated last time I could connect without problem.
-I can connect using 3G.
-I can connect using WiFi in other applications than Spotify, for example Opera Mobile and the native browser.
-I have reinstalled the application without difference."
However, I did it a little different, which made it work: instead of choosing "Easy WiFi", I choose my network directly from the list: see attachment. I never thought of that I could do so and I can't remember I did that before the update either. I have now synced my tracks and the app seems to be a little buggy, I still hope for an update, though it now works at least. Sometimes it crashes.
Please, tell me about if this worked for you and if you have other, better solutions. This isn't good enough, I still seek a better way.
/L
Attachments:
Scr000020.jpg ‏53 KB

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Files transferred to external HD end up in trash - very strange issue

Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?

Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

Hello,
I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
Thanks,
Andrew

Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
Thanks

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue in custom Success/Failure captions

Hi,
I have a strange issue in my custom Success/Failure caption. If I use 'S' letter in my customized caption .bmp file, it is not showing properly in the captivate. Attached file is for your reference. I tried converting text into image in photoshop, still it shows the same thing. Any thoughts??
Thanks in Advance,
-Ajay

OK. That's what I thought.
So what I think is going on here is due to the way Captivate assembles text captions that can stretch to any size based on the component images. I think your corner image that contains the text is being stretched right at the point where the S character is located on the end of Congratulations. Captivate is achieving the resizable text caption by repeating the last few pixels of each background image.
If you want to test my theory, just make your Congratulations text slightly shorter (use a condensed font or make the font size smaller) and I think your issue will go away.

Strange issue in Report Builder

Hi All,
I am facing a strange issue in Report Builder.
I am having a report which is currently in production. when i am opening that report and just saving it without making any changes, then also the size of the report is reducing from 238 to 204 kb.
When i am executing this report in production then it is giving me the error "Invalid Body size"
Please hlep me or else have to ask God to save me.
Thanks
Aryan

Hi Hussien,
I tried thart solution but it not worked. i put some debug statement in Before Parameter form, after Parameter form, before report triggers. When i am running that report i am getting the debug statement of Before and After Parameter triggers but it is failing somewhere in Before Report Trigger.
I removed everything from Before Report Trigger and still the result is same "Invalid Body Size".
Please Hussien give me a some pointer which stage is processed between After Parameter Form trigger and Before Report Trigger.
Thanks
Aryan

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Huawei E220 strange issue running 10.6.2

Hi, I'm testing the Huawei E220 with a brand new Macbook Air running 10.6.2.
My provider is Vodafone IT.
I have a very strange Issue:
If I start the connection the Macbook Air suddenly shuts down a few seconds after the connection has been established. If I leave the modem connected to the usb port without activating a connection nothing happens.
Has anyone had this same problem??
This mac works perfectly with any other HSPDA usb modem.
Vodafone posted a new software for mac (Vodafone Mobile Broadband 3.04.10.00). This link can be useful (not only for Italy) because it is constantly updated:
http://www.business.vodafone.com/site/bus/public/enuk/support/10productsupport/laptop_connectivity/40_software/software/10_latest/pmac.jsp

my friends 13" mbp is also having trackpad problems. I plugged in an old usb trackball and that seems to to at least get me so I can run a hardware test off the applications dvd.

Strange issue in Mail

Similar Messages

Maybe you are looking for