Strange issue in Oracle ASM on Two node RAC where in one ASM node shows all diskgroup while other node shows missing node.

We have Oracle datbase 11gR1 in RAC node with Oracle ASM.Recently our database server got crashed and we are trying to restore back services.
Using Snapshot technologyBusiness copy we had synced all our disk on storage level. Post this when we are trying to start ASM instance on node 1 it is coming and showing all diskgroups but on other node it is throwing errot with missing e diskgroup.
ORA-15032: not all alterations performed
ORA-15040: diskgroup is incomplete
ORA-15042: ASM disk "5" is missing
Expert please share your views.
Thanks,
Tushar

The I/O fabric layer on the other node failed to mount all storage LUNs - resulting in ASM being unable to mount a diskgroup as there are missing disks in that group.
Rebooting is exactly what could be needed to reset the h/w and infrastructure used by that node, in order for it to see all the storage disks again. As node 1 sees all storage disks (and is working), the disk itself on the storage system is intact and usable.
What is the o/s? What is the fabric layer? What is used on o/s for dealing with the I/O fabric layer?

Similar Messages

Just installed Firefox 9.0.1. When opening a new browser session, two tabs will open. One is my home page and the other is a Firefox welcome page. I just want my homepage to open. How do I achieve this? Thanks.

Just installed Firefox 9.0.1. When opening a new browser session, two tabs will open. One is my home page and the other is a Firefox welcome page. I just want my homepage to open. How do I achieve this? Thanks.

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Oracle 11gR2 (2 node) RAC Architecture requirements for ASM implementation

My architect is the following:
* RAC1 server of Red Hat Linux Enterprise 5.5 64bit
* RAC2 server of Red Hat Linux Enterprise 5.5 64bit
* NFS Server (SAN) with Red Hat Linux Enterprise 5.5 64bit
- Exported files systems for Shared Data, OCR and Voting Disks to nodes RAC1 and RAC2
I've installed the ASM packages on to my NFS Server (SAN) and then realized that I still need a way to share the storage. It is my understanding that Oracle ASM for Red Hat Linux Enterprise 5.5 64bit DOES NOT PROVIDE Shared Storage to the other nodes (RAC1 and RAC2). It seems that I need something else???
I've implemented Oracle RAC 11gR2 using NFS and wanted to try building Oracle RAC using ASM in my playground (home server's).
Does anyone have any ideas on how I might be able to use ASM with out having a true network shared storage. I'm using NFS because it is part of the Red Hat Enterprise 5.5.
Any ideas are appreciated !!!

Hi,
I would't recommend NFS for RAC in a enterprise solution. However if you are doing this for your playpan, then this is what you can do.
Once the NFS shares are presented to the servers, you need to mount your filesystems on the RAC servers to access the NFS shares.
e.g, If the the following NFS shares are presented to rac nodes:
/mnt/disk1
/mnt/disk2
And let say you want to have your ocr and voting disks on /mnt/disk1 and database on /mnt/disk2.
Firstly, you need to mount the shared on one of the rac nodes as follows. I will mount /mnt/disk1 as /u01/shared for my ocr and voting disks and /mnt/disk2 as /u01/asmdata by updating my fstab file as follows:
nfs_server:/mnt/DISK1 /u01/shared nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,noac,vers=3,timeo=600 0 0
nfs_server:/mnt/DISK2 /u01/asmdata nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600 0 0
Mount the FS on both servers and then create the block devices into each filesystem. You don't need to run oracleasm to create disks on it but rather change your ASM discovery path to the location where you have the block devices created and mount your asm diskgroups.
That is how I got my 11g RAC setup.
Hope that helps.
Pranilesh

Issues with 2.5mm jack on E71. Where can one get a...

Hi,
I really want to get an adapter that will allow me to use 3.5mm headsets on my E71. I have obught two non OEM adapters and neither work.
I have found this sold in different places in the States, but not here:-
http://store.mobileburn.com/content/accessories/11-75--5383.htm
Anyone know where one of these, or a similar Nokia product can be got on this side of the atlantic...
Thanks
Solved!
Go to Solution.

hi, this reply may be a bit late. however,i just got something to share.
ive been using some unknown brand 2.5mm to 3.5mm adapter and so far have no problems. what i meant by unknown is some cheaply made ones, doesnt even come in any packages. so i dun see why you could be facing problems with such adapters. it costs ard 8SGD (Singapore) here, which is equivalent to 5.6USD or 3.55 pounds.if you guys need help, i can willingly send over few brand new working adapters. u guys just need to pay for the product and of cos postage, how much? that i suggest you look up at the post office in ur area. i can also send a picture of them, if u wish, via email.
i'm doing this out of goodwill, as i see the abundant supply of working adapters in every hardware stores here. send me a msg or reply to this post if u are keen.
Message Edited by erauqs on 30-Sep-2009 08:33 PM

My question is why does firefox close when I click another window off? I have a new window come up so I have two, but when I click one off it closes all of them.

I usually have more than one tabs up and ready when I'm searching the web. But when I look at my mail or when a new window is opened if I click the "X" all of my windows are closed. What could be the problem?

This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866''' {web link}
From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings. It was suppose
to have been fixed in v30.
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.

Layout issue in Oracle rdf

Hi Experts,
I am facing a strange issue in oracle rdf reports.
Requesting an assistance from you.
I have a report which displays the vendor information.
For all the vendors the layout is working fine for me, but for one particular vendor the vendor name is splitting into 2 lines as follows.
EAD - Empresa de Arquivo de
Documentação, SA
But it is one name as 'EAD - Empresa de Arquivo de Documentação, SA'.
Please help me on this. how to display this as a single value.
Thanks,
Zaheer.

This is probably because the field is not wide enough. Check the horizontal elasticity property of this field (and possibly the frames around it).

Strange issue in FBA internet site

Hello All..
Last week we observed very strange issue in our production servers, it is pure FBA public site..
No matter we click anything it shows the authentication (login page), the site custome master page was coming and this was a custom login page..
Now when we restored the content DB from last backup the issue went off.
I have already checked permissions, anonymous policy, everything was as it is..
No special errors in DB log or app log..
wondering what could be the issue...

This indicates that there was a image\ file which was checked out or unpublished which was causing this issue
If you can recreate the issue, please upload fiddler trace so we can analyze it.
If this helped you resolve your issue, please mark it Answered

Configuring Filesystem Free Disks for ASM ? Can you use free space for ASM

Is there a way to dedicate the available disk space for ASM in order to create a database under ASM?
I was hoping that I would not have to reinstall the Linux OS Enterprise 5 (Red Hat). So I de-installed my 2-node RAC environment, installed the ASM required RPMs for Red Hat linux Enterperise 5 and then proceeded to reinstall 11g Clusterware and set "Configure Automatic Storage Management (ASM)".
Did I miss something? THanks

Thank you.
I have 3 VM-Oracle guests running Oracle 11g. When I've used NFS as share that worked fine, however I was not using ASM. I know wish to get smart about ASM implementation.
Server1(rac1) Linux E5 64bit
Server2(rac2) Linux E5 64bit
Server3(asm) Linux E5 64bit (I created four partitions
./oracleasm createdisk DATDISK /dev/xvda10 OK
./oracleasm createdisk VOTDISK /dev/xvda11 OK
./oracleasm createdisk OCRDISK /dev/xvda12 OK
./oracleasm createdisk OFRDISK /dev/xvda13 OK
On Node1 and Node 2
./oracleasm scandisk
Scanning the system for Oracle ASMLib disks: OK
After this should I or how do you make a partition shared? Could I used NFS? so that I can proceed with the RAC install and then create database .

Failover takes 14 minutes on 2 node rac cluster installed on virtualbox

i have 2 node rac 10gr2 installation without asm on virtualbox for learning purposes, the storage is kept on rac1 node and shared via nfs,
i connected a third machine to be used as client by creating a service
but when i shutdown the rac2 node to cause a failover, it takes almost 14-15 minutes to reconnect to the rac1 node
even though the vip of rac2 is taken up by rac1 in not more than 30 seconds
so i checked the listener log for rac1 node
the correct service update shows up after 14 minutes every time i try
tried a lot of googling but found nothing
This is the service
RAC =
(DESCRIPTION =
    (LOAD_BALANCE = ON)
    (FAILOVER = ON)
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip.localdomain)(PORT = 1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = RAC.WORLD)
      (FAILOVER_MODE =
        (TYPE = SELECT)
        (METHOD = BASIC)
        (RETRIES = 180)
        (DELAY = 1)
18-DEC-2013 18:34:48 * node_down * rac2 * 0
18-DEC-2013 18:34:48 * service_down * RAC2 * 0
18-DEC-2013 18:34:48 * service_update * RAC1 * 0
18-DEC-2013 18:34:48 * service_update * RAC1 * 0
18-DEC-2013 18:35:48 * service_update * RAC1 * 0
18-DEC-2013 18:35:48 * service_update * RAC1 * 0
18-DEC-2013 18:36:48 * service_update * RAC1 * 0
18-DEC-2013 18:36:48 * service_update * RAC1 * 0
18-DEC-2013 18:37:48 * service_update * RAC1 * 0
18-DEC-2013 18:37:48 * service_update * RAC1 * 0
18-DEC-2013 18:38:48 * service_update * RAC1 * 0
18-DEC-2013 18:38:48 * service_update * RAC1 * 0
18-DEC-2013 18:39:45 * service_update * RAC1 * 0
18-DEC-2013 18:39:45 * service_update * RAC1 * 0
18-DEC-2013 18:40:12 * service_update * RAC1 * 0
18-DEC-2013 18:40:12 * service_update * RAC1 * 0
18-DEC-2013 18:40:48 * service_update * RAC1 * 0
18-DEC-2013 18:40:48 * service_update * RAC1 * 0
18-DEC-2013 18:41:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=rac1.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_RAC1)(VERSION=169869568)) * status * 0
18-DEC-2013 18:41:49 * service_update * RAC1 * 0
18-DEC-2013 18:41:49 * service_update * RAC1 * 0
18-DEC-2013 18:42:31 * service_update * RAC1 * 0
18-DEC-2013 18:42:31 * service_update * RAC1 * 0
18-DEC-2013 18:43:49 * service_update * RAC1 * 0
18-DEC-2013 18:43:49 * service_update * RAC1 * 0
18-DEC-2013 18:44:49 * service_update * RAC1 * 0
18-DEC-2013 18:44:49 * service_update * RAC1 * 0
18-DEC-2013 18:45:40 * service_update * RAC1 * 0
18-DEC-2013 18:45:40 * service_update * RAC1 * 0
18-DEC-2013 18:45:49 * service_update * RAC1 * 0
18-DEC-2013 18:45:49 * service_update * RAC1 * 0
18-DEC-2013 18:46:49 * service_update * RAC1 * 0
18-DEC-2013 18:46:49 * service_update * RAC1 * 0
18-DEC-2013 18:47:49 * service_update * RAC1 * 0
18-DEC-2013 18:47:49 * service_update * RAC1 * 0
18-DEC-2013 18:47:54 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=RAC.WORLD)(FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC)(RETRIES=180)(DELAY=1))(CID=(PROGRAM=sqlplus)(HOST=client.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.10.10.103)(PORT=32774)) * establish * RAC.WORLD * 0
18-DEC-2013 18:47:55 * service_update * RAC1 * 0
18-DEC-2013 18:47:55 * service_update * RAC1 * 0

These entries came by when the failover state resumed
[19-DEC-2013 15:17:05:546] ntt2err: entry
[19-DEC-2013 15:17:05:547] ntt2err: soc 9 error - operation=5, ntresnt[0]=530, ntresnt[1]=113, ntresnt[2]=0
[19-DEC-2013 15:17:05:547] ntt2err: exit
[19-DEC-2013 15:17:05:547] nttrd: exit
[19-DEC-2013 15:17:05:547] nsprecv: error exit
[19-DEC-2013 15:17:05:547] nserror: entry
[19-DEC-2013 15:17:05:547] nserror: nsres: id=0, op=68, ns=12570, ns2=12560; nt[0]=530, nt[1]=113, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[19-DEC-2013 15:17:05:547] nsrdr: error exit
[19-DEC-2013 15:17:05:547] nsdo: nsctxrnk=0
[19-DEC-2013 15:17:05:547] nsdo: error exit
[19-DEC-2013 15:17:05:547] nioqrc: recv: packet reader error -> translated to IFCR_EOF
[19-DEC-2013 15:17:05:547] nioqer: entry
[19-DEC-2013 15:17:05:547] nioqer: incoming err = 12151
[19-DEC-2013 15:17:05:547] nioqce: entry
[19-DEC-2013 15:17:05:547] nioqce: exit
[19-DEC-2013 15:17:05:547] nioqer: returning err = 3113
[19-DEC-2013 15:17:05:547] nioqer: exit
[19-DEC-2013 15:17:05:547] nioqrc: exit
[19-DEC-2013 15:17:05:547] nioqrs: entry
[19-DEC-2013 15:17:05:547] nioqrs: state = normal (0)
[19-DEC-2013 15:17:05:547] nioqrs: reset called, but connection in EOF state.
[19-DEC-2013 15:17:05:547] nioqrs: exit
[19-DEC-2013 15:17:05:547] nioqds: entry
[19-DEC-2013 15:17:05:547] nioqds: disconnecting...
[19-DEC-2013 15:17:05:547] nsclose: entry
[19-DEC-2013 15:17:05:547] nstimarmed: entry
[19-DEC-2013 15:17:05:547] nstimarmed: no timer allocated
[19-DEC-2013 15:17:05:547] nstimarmed: normal exit
[19-DEC-2013 15:17:05:547] nttctl: entry
[19-DEC-2013 15:17:05:547] nttctl: entry
[19-DEC-2013 15:17:05:547] nsdo: entry
[19-DEC-2013 15:17:05:547] nsdo: cid=0, opcode=66, *bl=0, *what=0, uflgs=0x0, cflgs=0x2
[19-DEC-2013 15:17:05:548] nsdo: rank=64, nsctxrnk=0
[19-DEC-2013 15:17:05:548] nsdo: nsctx: state=1, flg=0x1004009, mvd=0
[19-DEC-2013 15:17:05:548] nsdo: entry
there are a lot more entries
but can't really paste all of them here
still have no clue what so ever regarding what is actually happening

Oracle 11.1.0.6 - Can more than one database work of the same installation

I am in the process of setting up 3 production 11.1.0.6 databases in a RAC Linux RH4 environment (approx 40GB each in size), question is can I get all 3 databases to work of the one Oracle Database installation i.e. can all three separate database work of the same set of binaries and from the same Oracle_Home?
As far as I know the only items that will be different of those values in the tnsnames and listener files.
Thanks

Lets back up and clarify terms.
A 3 node RAC cluster has one (1) and only one (1) database. Three (3) instances but only one (1) database.
If you are talking about something else you need to be very clear in your description.
Assuming one database and three instances the listener and tnsnames files should be identical. And, as Oracle creates all of this during dbca installation, why is it a concern?

EM problem on 2 Node RAC

Hi Guys,
We have 2 node RAC running on Windows 2008 plateform. All is fine if we login to sqlplus but we having issues with EM since the day we installed RAC. 2 days before we started having invalid username/password error on EM. I tried to recreate the repository on our primary node using the command mentioned below:
emca -deconfig dbcontrol db -repos drop
but when we it goes to stage ' Drop repository (It may take a while) ' I left is running all night but it appears the same in the morning. Also it doesn't let anyone connect to RAC during the time as well.
I have been pulling my hairs as I have tried recreating repository on both nodes but it appears be the same.
Any suggessions/solution would be much appreciated.

hi,
Can you substitute the respective IP addresses into the connection string and see if that helps.
regards
Alan

Service on two different RAC environment

I am looking for a way to create a service which can be supported from two different RAC environments.
One service for two different RAC databases. Is it possible. If yes, then how.

Can you eloborate your question. Give a specific example of what are you trying to accomplish. What exactly did you mean by "service" here. It has such a broad scope.

How do i licence a two node RAC with ASM infrastructure

AM trying to estimate the licensing of two node RAC with ASM as storage manager and GRID control as management tool

Hi,
Oracle license depends on lot of things, Edition of Oracle your running standard or enterprise, the optional packges you need and etc.
Read through http://docs.oracle.com/cd/E11882_01/license.112/e10594/editions.htm#BABDJGGI
also if you license named users or processor. You can get the price for the from online oracle store
https://oraclestore.oracle.com/OA_HTML/ibeCCtdMinisites.jsp?language=US&ref=ibeCZzpHome.jsp

Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

Hello,
I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
Thanks,
Andrew

Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
Thanks

Configure OEM in Oracle 10.2.0.4 Two nodes RAC

Hi all,
I'm having some troubles making rigth configuration for OEM in my RAC.
Everything during installation or configuracion seems ok but later it's all wrong.
The point is:
Global database is ON and every of two nodes is also ON. I can accees it from inside and outside the server nodes.
CRS shows everything OK with all services and resources ONLINE.
emctl status dbconsole -clusterhttps://node2:5500/em/console/aboutApplication
EM Daemon is running.
emca -displayConfig dbcontrol -clusterINFO:
**************** Current Configurationl ****************
INSTANCE NODE DBCONTROL_UPLOAD_HOST
inode2 node2 node2
inode1 node1 node2
So everything should be OK
When I try to access OEM, it says that status can't be acess and offers me the choice of START or BEGIN RECOVER
When I go through START the two nodes are up but can't access the instances.
So I know that something has wrong configuracion but I don't know WHAT!!!
Any Idea???
Thanks in advance

Start looking at the logs under $OH/<node_name>/sysman/log - most likely it will offer some clues.

Strange issue in Oracle ASM on Two node RAC where in one ASM node shows all diskgroup while other node shows missing node.

Similar Messages

Maybe you are looking for