Strange issue when save from sending to sounstrack

Hi I don't understand.... I open my sequence in FCP, then sent it do Multitrack project in STP, make my changes in the audio file, save it but when I come back to my sequence in FCP the audio file has not change...Why??
Thanks

They were probably working in the individual audio file ending is ".stap" (which you COULD import to Final CUT) not a multi-track file ending in ".stmp"... Visit the link I sent you previously and it also mentions that you cannot import a multi-track audio file to Final Cut.
+If you export a multitrack project, you will have to re-import a mixed down file into Final Cut Pro, and you then won't have individual audio tracks to work with in Final Cut Pro. So you should finish editing the video before exporting and editing a multitrack audio project in Soundtrack Pro.+

Similar Messages

Strange issue when scaling text

Hi,
I'm using inDesign CS6 and there's a strange issue when rescaling a text with overflow to 200%:
As you can see, the fourth paragraph doesn't change its font size, even if it has exactly the same configuration. This happens apparently randomly to some paragraphs, or even lines of a paragraph in some cases.
The weirdest thing is that I have tried the same action with the same .indd file in other computers (another Mac and a Windows one, both CS6) and it scales properly all paragraphs. So I checked all the preferences from one computer to the other, and even if they are the same, the scaling issue still happens.
Any hints?

See Replace Your Preferences

Strange issue when pausing LONG audiobook--pressing play again changes the

Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?

I'm glad that I'm not the only one having this
problem. It's ironic that we're both having issues
with the SAME audiobook. I haven't had a chance to
listen to Books 1-5 much to see if they have the same
issue or not--I don't remember any on the few parts
that I've played for my nephews.
Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
I'm thinking that I may try to convert to AAC before
I try the splitting program--in theory, it's easier
to start right back in again when you only have 1
track to find, than when you have dozens/hundreds of
smaller tracks. It's sometimes hard to remember
which track you left off with--even if it's
"bookmarked" within that track.
I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
My only concern is how much quality I'm losing by
converting from one compressed format--MP3--to
another compressed format AAC.
Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
I suppose, since it's
spoken word instead of music, the change shouldn't be
too noticable. I'm not sure what kind of time frame
it'll require to convert. I'll probably try it with
book 1 first--since it's the smallest.
May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
Keep me updated on your end. I sure which that there
was an explanation for why it happens.
Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
Talk to you later!
HP dv5117d, iTunes 7.0.2.16 Windows XP Pro 1st gen 4GB nano, sw ver 1.3

Resolve a Wi-Fi connection issue when waking from sleep

Hi,
In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
Thank you

Hello BGreg and thank you for your answer,
I have alreadty read about this solution, and tried it.
I downloaded the 1.2 Go file, and applied it. And repaired permissions.
Everything went fine.
Unfortunately, it didn't solve the problem.
Meaning that when iMac wakes up, it doen't join my WiFi network.
I have to do it manually.
I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
And my network setup has never changed.
another info :
I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
Do you think I should call Apple Assistance ?

JMS issues when migration from weblogic 9.2 to 10.3.5

We are facing some issues when migration from weblogic 9.2 to 10.3.5
In weblogic 9.2 :_
BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>
Company
</ejb-name>
<entity-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
<entity-cache>
<max-beans-in-cache>3500</max-beans-in-cache>
<idle-timeout-seconds>100000</idle-timeout-seconds>
<read-timeout-seconds>0</read-timeout-seconds>
<concurrency-strategy>ReadOnly</concurrency-strategy>
</entity-cache>
Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
migration to Weblogic 10.3.5_
With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
Can some one look into this and provide your inputs to resolve this issue.

I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
Tom

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Strange issue when synching Iphone

Hi,
Had a strange issue and wondered if anyone could explain what could possibly have happened?
I purchased an album from iTunes on Saturday on my MacBook Pro. My iTunes library is actually stored on my time capsule, but everything was fine.
However today at work (so separated from my Time Capsule) I plugged in my iPhone to recharge. As standard it tried to synch - and this is when the issue occurred:
A message appeared stating that there were purchased items on my iPhone that were not in my iTunes library, that I must authorise the machine else the items would be removed. When clicking on the authorise button, the authorisation / iTunes store login screen appeared - containing the username [email protected] - which is completely unknown to me. I have absolutely no idea who this person is and I have never seen that email address before.
I changed the login to my details and signed in - where the system said that my machine was already authorised for my account - so the synch continued normally (apart from the usual messages when disconnected from my time capsule).
How the **** did my machine think it was attached to wesley patt's account? Has this happened to anybody else?
Cheers for any help
Darren

I just tried to sync my wife's iphone and the same name [email protected] came up. This can not be a coincidence. This has to be a virus of some sort. My wife is unable to make purchases from her computer right now even though the account detail works. Did this happen to either of you? I'm reporting this to apple and referencing this board.

Transparency issues when printing from Illustrator CS5

I recently designed a flyer for an event that a group of artists and I are doing as a not-for-profit organization that we started, to help clean up the area and promote the arts.
When I print the file (saved as an AI), the colors are bold, the font is crisp, and everthing overall looks fantastic, apart from this "box" around some of the elements I have created/added to the file.
When being printed from an exported jpeg format, the boxes are not present, but the image overall is of lesser quality (i know it's from being compressed to a jpeg), and the colors are not as bold.
I only have a black & white printer, a Brother MFC-7220. I only found out this issue when my curiousity got the best of me, and printed it to see what it'd look like on paper (8.5"x11") before we sent it off to the print shot. This is when I noticed the problem.
The elements which have this box around them were edited in Photoshop CS 6 (trial), where I had (at least thought), disposed of each elements background, so I could import them into AI as objects, without any background.
The files were edited in PS in new documents with a transparent background, saved as a PSD, then "opened" in Illustrator where I simply copied the object and pasted into the AI file I was working in. I've tried recreating/re-adding the elements from PS back into AI with the same issue.
The image also looks perfect on my screen, no boxes whatsoever. I've tried playing around with printer settings, transparency/raster settings, but the only thing I can get close, is the low-quality jpeg file. This problem also happens when exporting to a PDF, which is what I typically use for my printing format from AI.
Any ideas what's going on here? The pictures linked below show a photo of the AI and the jpeg, and a screencap of my desktop as the AI stands right now. The jpeg export has a few minor changes to it, but are still otherwise the same. The only items that are "supposed" to have this, are the logos for our sponsors in the bottom-left corner.
I'm stumped, nothing is working that I've read about, and I need to get these printed as soon as I can! Any help would be appreciated - please keep in mind I'm a novice when it comes to AI/PS, I know mostly basics.
[url=http://s1286.beta.photobucket.com/user/em0te-apparel/library/AI%20Print%20Issue]PICTURES[/url]

I, too am having the same issue printing from AI CS5. I have edited images in PS CS5 and there is a transparent background. I then placed (File>Place) the PSD files into AI and everything looks good on screen. However, I'm also getting a strange box that appears around my images—though the box itself isn't a solid opaque—it looks more like there's a overprint or screen and so it just shifts the colors behind it. I've tried saving the images as transparent PNGs with the same result. I've also tried playing with my transparency settings in the print dialogue to no avail.
Strangely this is only occurring when I print at 100% size. I came upon this by happenstance when I accidentally printed a copy at 75% and everything was fine. If anyone has any insights, it would be much appreciated. Thanks!

Mid 2009 17" MacBook Pro battery shutdown issue when waking from sleep.

My unibody 17" MacBook Pro occasionally shuts down on waking from sleep when it isn't plugged in.
When I open the lid to wake it I can hear the hard drive and fans starting to spool, and then the next second it's off and silent. The laptop doesn't mind being turned on again after it does this and might go a week without doing it again, equally it might do it next time I try and wake it from sleep. It does this regardless of battery charge level.
coconutBattery says the battery still has 86% of its designed capacity, and I haven't noticed anything else untoward regarding battery charging or performance when in use.
So my question is two fold:
1) Does it sound like the battery's internal processor is malfunctioning, or could it be something else?
2) If it is the battery's internal processor, will replacing the battery replace the processor, or are they fitted separately (in defference to the 'internal' part of its name)?
Cheers,
James
nb. just in case it makes any difference, the laptop is a 17" Mid-2009 MacBook Pro, 2.8GHz Core 2 Duo with 4Gb Ram running OSX 10.7.3

James
I have had issues when i press the space bar from sleep, sometimes it wakes but others i'm forced to power it on with the power button.
Is this similar to anything you've experianced?
Its so inconsistantly these days, but i'm also connected to an external screen.

Cracking strange sound when comming from sleep

When comming from a sleep (not always, but when beeing longer in sleep) I hear (next to the superdrive sound that is normal) a sort of cracking 'strange' sound out of my left/center area just around where the fan is.
It's a sound like you plugin a radio with an headplug let's say. Seems to come out of the speakers, but i'm not sure about that.
Is it normal (didn't do this before, only noticed it now after a month)? Or can i add another point to the list when i'm calling applecare (i really have a very monday morning machine i guess,: cpu whine, display not ok, strage blinking numlock sometimes).
Did find some thinks that look alike:
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=420873&an=0& page=9
http://discussions.apple.com/thread.jspa?messageID=2565669&#2565669

Great description...! I thought it sounded a bit like the trashcan sound.
I have got the same thing which isn't exactly my biggest problem... I also have the situation, that my MB doen't go to sleep, unless I directly tell it to. I thought the sound was related to that problem, but as none of you have mentioned it...?
Also my MB cannot be started normally every now and again and I have to do a PRAM reset to get it running again.
This is my second MB, so I'm slowly running out of patience...
The first one had the RSS, by the way.
MacBook Mac OS X (10.4.7) Wish I had my iBook back...!

Snow Leopard - Latency issues when waking from sleep

I own two macs ('09 mini and unibody macbook), both of which connect wirelessly to an airport extreme N router. Since upgrading to Snow Leopard I have been dealing with terrible latency issues when the computers wake from sleep. Ping times from local servers increase from around 23ms to 220ms and webpages load slowly. A quick reboot solves the issue. Connecting directly to the airport extreme with a patch cable also solves the latency issue so I know it's just with wireless.
Has anyone else experienced this problem since upgrading and, if so, what are you doing to solve the issue?
Edit: Samples of ping times...before and then after a reboot:
BEFORE:
Ping has started…
PING www.l.google.com (64.233.169.147): 56 data bytes
64 bytes from 64.233.169.147: icmp_seq=0 ttl=238 time=306.921 ms
64 bytes from 64.233.169.147: icmp_seq=1 ttl=238 time=227.929 ms
64 bytes from 64.233.169.147: icmp_seq=2 ttl=238 time=149.819 ms
64 bytes from 64.233.169.147: icmp_seq=3 ttl=238 time=70.753 ms
64 bytes from 64.233.169.147: icmp_seq=4 ttl=238 time=299.572 ms
64 bytes from 64.233.169.147: icmp_seq=5 ttl=238 time=221.037 ms
64 bytes from 64.233.169.147: icmp_seq=6 ttl=238 time=142.583 ms
64 bytes from 64.233.169.147: icmp_seq=7 ttl=238 time=63.197 ms
64 bytes from 64.233.169.147: icmp_seq=8 ttl=238 time=292.738 ms
64 bytes from 64.233.169.147: icmp_seq=9 ttl=238 time=214.157 ms
--- www.l.google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 63.197/198.871/306.921/85.201 ms
AFTER:
Ping has started…
PING www.l.google.com (xxx.xxx.xxx.xxx): 56 data bytes
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=0 ttl=47 time=46.076 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=1 ttl=47 time=45.177 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=2 ttl=47 time=44.649 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=3 ttl=47 time=46.317 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=4 ttl=47 time=45.886 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=5 ttl=47 time=45.180 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=6 ttl=47 time=45.899 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=7 ttl=47 time=46.236 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=8 ttl=47 time=45.281 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=9 ttl=47 time=44.900 ms
--- www.l.google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 44.649/45.560/46.317/0.561 ms
Message was edited by: mikespug

I use Ethernet so I cannot comment but have you tried trashing the airport pref.plist and removed the preferred networks in the network set up in System Preferences and then set up the wifi connection again?
This seems to help with a lot of airport problems on this forum.

Abap issues when upgrading from 4.7 to ecc6.0

hello All,
I am posting this question with intention of general issues we face that are abap related when upgrade from 4.7 to ECC6.0,
do the programs ahve to be adjusted, if sumone cud also throw some light on what is unicode and wat role does it play in the upgrade,
some specific examples wud be appreciated
thanks,
RS

hi,
Go through this
Unicode is an international standard that assigns characters from virtually every
language and script a unique Unicode Scalar Value, which is a number written in
hexadecimal notation.
     Character     Unicode Scalar Value     Unicode Character Name
     A      U+0041          LATIN CAPITAL LETTER A
     Ä     U+00C4          LATIN CAPITAL LETTER A WITH DIAERESIS
     α     U+03B1          GREEK SMALL LATTER ALPHA
Implementing the Unicode standard enables a single software product or a single
web site to be accessed across multiple platforms, languages, and countries without
the need for re-engineering. It allows data to be transferred across many different
SAP and non-SAP systems without corruption. To meet these requirements, the SAP
Unicode team continues to promote Unicode-enabled SAP systems, aid their
installation, and provide tools and full technical support for the smooth
conversion of existing SAP non-Unicode systems to Unicode.

File permission issue when indexing from JSP

HI
I have a class that I intend to use both in batch file and in JSP that will build a search index (Lucene) somwhere in the file system outside the web root. The class works great when called from the batch script but when I try to use it in the JSP page i get this error:
[#|2004-04-23T09:56:41.155-0400|INFO|sun-appserver-pe8.0|javax.enterprise.system.stream.out|_ThreadID=13;|
caught a class java.security.AccessControlException
with message: access denied (java.io.FilePermission C:\AMIR\nemours_internet\common\search_index\html\segments delete)|#]
Can someone tell me if this is a setting in PE8 server or do I have to do something within my class code?
Thanks
Following is my class (BuildPageIndex.java) and the snippet of the JSP file where I call it...
<<<< package and imports ommited >>>>
public class BuildPageIndex {
     private StringBuffer sbOut;
     public BuildPageIndex(){
     public BuildPageIndex(String pathToCMTXML){
     CMTController.loadCMTXML(pathToCMTXML);
     public void buildIndex(){
          try {
          sbOut = new StringBuffer();
     // get all the page objects from the database
     ArrayList pageList = CMTPersister.getInstance().getAllPages();
     if (pageList.size() == 0)
          sbOut.append("<Lucene> No HTML pages in the database...Exiting...\n");
          return;
     // obtain index location from XML config file
     HashMap searchMap = CMTController.getInstance().getSearchConfig();
     String strIndexLoc = (String)searchMap.get("LOCATION");
     sbOut.append("\n\n\n");
     // if backup management fails abort index creation
     if (!(manageBackup(strIndexLoc)))
                    return;
     // create index and start timing
     sbOut.append("<Lucene> Creating index for HTML pages in: "+ strIndexLoc + "\n");
     Date start = new Date();
     IndexWriter ixdBuilder = new IndexWriter(strIndexLoc, new StandardAnalyzer(), true);
     //for all pages ...
     for (int i=0;i<pageList.size();i++)
                    //get a page
                    Page thisPage = (Page)pageList.get(i);
                    // create lucene document from a page
                    sbOut.append("<Lucene> Page [" + thisPage.getURL().trim() +"] added \n");
                    Document pg_doc = PageDocument.Document(thisPage);
                    // add page document to the index...
                    ixdBuilder.addDocument(pg_doc);
     // optimize and close index
               ixdBuilder.optimize();
               ixdBuilder.close();
     // calculate the time it took to build index
     Date end = new Date();
     long msecs = end.getTime() - start.getTime();
     sbOut.append("<Lucene> HTML Index created in: " + msecs + " milliseconds ("+ (float)msecs/1000.00 + " seconds) on "+pageList.size()+" pages\n\n");
     } catch (Exception e) {
               System.out.println(" caught a " + e.getClass() + "\n with message: " + e.getMessage());
     public String getOutput(){
          return this.sbOut.toString();
     private boolean manageBackup(String loc){
boolean retVal = true;
          //rename the location to _BACKUP so we have it
File currIdx = new File(loc);
File backIdx = new File(loc+"_BACKUP");
if (currIdx.exists()){
     sbOut.append("<Lucene> Index directory allready exists!\n<Lucene> Backing it up to ["+backIdx.getPath()+"]...\n");
     if (backIdx.exists()){
          sbOut.append("<Lucene> Backup directory also exists! Will delete it first...\n");
          if (!(Utils.deleteDirRecursive(backIdx))){
               sbOut.append("<Lucene> Failed deleting backup directory! Aborting...\n");
               retVal = false;
     if (!(currIdx.renameTo(backIdx)))
          sbOut.append("<Lucene> Problem backing up existing index! Aborting...\n");
          retVal = false;
return retVal;
     * Class has a main so it can be run from the batch file
     * or a command line
     * @param args
     public static void main(String[] args) {
          if (args.length == 0) {
               System.err.println("Usage: BuildPageIndex <path_to_cmt.xml_file>");
               System.exit(0);
          BuildPageIndex bpi = new BuildPageIndex(args[0]);
          bpi.buildIndex();
          System.out.println(bpi.getOutput());
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JSP snippet
+++++++++++++++++++++++++++++++++++++++++++++
<%
     BuildPageIndex bpi = new BuildPageIndex();
     bpi.buildIndex();
     String results = bpi.getOutput();
%>
     <%=results%>

Hi Zambak,
It looks like you might need to give your JSP permission to delete the file that it is complaining about. One way to do this would be to add a FilePermission to the server's security policy file (located at <PE install dir>/domains/domain1/config/server.policy. Adding the following would grant file delete permissions to all files for all codebases...
grant{
permission java.io.FilePermission "<<ALL FILES>>", "delete";
After modifying the policy file, you will need to restart the domain by executing the following...
<PE install dir>/bin/asadmin stop-domain
<PE install dir>/bin/asadmin start-domain
It is also possible to further restrict permissions to certain codebases or further open the set of file permissions (adding write, read, delete for example). For more information on how to do this, please refer to the J2SE security documentation loacted at http://java.sun.com/j2se/1.4.2/docs/guide/security/permissions.html .

Strange issue when switching between spaces

This morning my laptop (MBP) started doing strange things when I switch space. For starters, it takes a lot longer to actually make the transition. Then, when the desktop has moved, it takes a second or so for the primary application window on that desktop to be activated, and the menu bar does a strange swipe animation. I've noticed in Console that there are errors such as this each time I switch space:
11/04/2013 12:50:03.425 Dock[363]: CGSGetWindowTags: Invalid window 0x214f
11/04/2013 12:50:03.426 Dock[363]: CGSGetWindowTags: Invalid window 0x214e
11/04/2013 12:50:03.427 Dock[363]: CGSGetWindowTags: Invalid window 0x214d
11/04/2013 12:50:03.427 Dock[363]: CGSGetWindowTags: Invalid window 0x214c
11/04/2013 12:50:03.427 Dock[363]: CGSGetWindowTags: Invalid window 0x214b
11/04/2013 12:50:03.428 Dock[363]: CGSGetWindowTags: Invalid window 0x214a
11/04/2013 12:53:54.281 Dock[363]: CGSGetWindowTags: Invalid window 0x21df
11/04/2013 12:53:54.283 Dock[363]: CGSGetWindowTags: Invalid window 0x21de
11/04/2013 12:53:54.298 Dock[363]: CGSGetWindowTags: Invalid window 0x21dd
11/04/2013 12:53:54.299 Dock[363]: CGSGetWindowTags: Invalid window 0x21dc
11/04/2013 12:53:54.299 Dock[363]: CGSGetWindowTags: Invalid window 0x21db
11/04/2013 12:53:54.299 Dock[363]: CGSGetWindowTags: Invalid window 0x21da
11/04/2013 12:53:54.300 Dock[363]: CGSGetWindowTags: Invalid window 0x21d9
Any ideas?

Consider the possibility of third party software incompatibility.
Does this behavior persist for a different user, e.g., Guest User? Does this behavior persist when starting up in Safe Mode?
charlie

Strange issue when typing a number in Lion

Hi,
I have a very rare issue when I type a number now and since I updated my system to Lion, no matter which program am I using, Safari, textedit, mail, etc. Every time I type a number (just one), it suddently erase itself, doesn't happen when I type more than one, it's very annoying and this didn't happen when I had Snow Leopard.
Any ideas?

…and so on = 58376163294144?
Could you please answer the questions, this is like drawing hens teeth.
I have entered the numbers but since I don't know how your sequence is input I can't do the preceeding numbers to the one that changes.
…which doesn't when I do it in Pages '09 v4.05:
Peter

Strange issue when save from sending to sounstrack

Similar Messages

Maybe you are looking for