Strange Issue with Display / Graphics (video attached)

I newly purchased a HP Laptop.
Model No: 15-r033tx
The problem I face is that screen flickers while playing videos, when images changes etc.
I have recorded the problem and created a video.
The link to the same is provided:
http://youtu.be/FpUhTUs8XUY
In this video you can see that when the images of the bags moves screen flickers.
The same behaviour occurs while playing videos too.
Please look into this issue and provide a solution
The issue remains in Windows 7 as well as in Linux Mint.
No flickering noticeable in BIOS screen.
Intel HD graphics, NVIDIA drivers are installed and are up to date.
Please help.

Hi @sujith_here
Welcome to the HP forum!
I understand that your display screen flickers when watching videos. Here is a link to Resolving Problems with Notebook Displays (Windows 7 and Windows 8). Please note the section on flickering screen.
Have you ran the HP Support Assistant to assist with HP updates and resolve issues?
Have you ran MS Fix It to help troubleshoot?
Good Luck !
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

A strange issue with importing avi video

I have a rather strange issue with importing avi files (which playback normally in other programs) into CS4. When I import an avi recorded from my camera into CS 4 in the preview the sound is played back normally, but the video itself is weird. Pretty much roughly first 5% of it are stretched over the whole spand and slowed down to fit. So the video of 4 minutes will play sound normally for 4 minutes, but replay only 10 seconds of video VERY slowly. I'm a bit puzzled because I've used the same camera with CS3 and never encountered this problem. breaking apart and speeding up the video obviously didn't work because the video only displays the first 5 recorded seconds no matter the speed, tweaking with presets didn't work either.

subtlemolotov wrote:
I obviously know it's a photo camera, I own it.
The point is it's something we needed to know to answer your question.
subtlemolotov wrote:
Well I've found a very unprofessional solution.
"An unprofessional solution?" Kind of like shooting video with an still camera.....

[GE60 OND] Strange issue with discrete graphics

Specs:
MSI GE60 OND
CPU: Intel i7-3610QM
Memory: 8gb
discrete graphics: nvidia 660m
OS: Windows 7 ultimate 64bit
Was having issues with laptop, i reformatted and updated all the drivers. still did not fix.
The issue:
When playing games (tested on BL2, CSGO, The Forest, TF2) with the 660m it runs fine for about 5min then starts to freeze/stutter (both sound and video). The FPS drops from around 120+ to around 20 for about 30seconds then snaps back to 120+ for another 30, then repeats. This does not happen when using the integrated video. Temps are staying in the 40-70c range.
Thanks in advance!

Quote from: Justkiller91;103962
Yes all games are on the internal hard disk.
Try to turn off the power saving function of the HDD.
http://www.msi.com/faq/nb-375.html

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Issue with display of decimal places

Hi,
In our custom built components we are facing a strange issue with the display decimals where the data type of an element is "QUAN - Quantity field, points to a unit field with format UNIT".
If the element has a value of 3000.000 KG the value is displayed as 3000. Where as for an element which has a value 3000.123 KG the same is displayed as it is with the decimals. We tried to resolve the issue by using Text editor or Input field as read only but in vain. The display property in the context are set to default.
If we change the element data type reference to "Dec - Counter or amount field with Comma and Sign" then all the values are displayed with the decimal places even if decimals are zero.
As a result we are facing alignment issues for the various quantity related elements displayed on the screen. To change the underlying data type of the element is a not a solution for us as the data type quan is required for conversion from one unit to another unit.
Can someone please advise how we could resolve this issue. We are on NW 7.0 + EHP4 + NW 7.01 SP4, kernel patch level 55 for 7.01
Regards
Rohit Chowdhary

Jameel, Thanks for the answer but this is a not a solution for us. We have around 40-50 webdynpro components and with mutliple views referring to this data element / domain combination. More so the context are bound to database tables / structures .
I hope to get a reply from Thomas on possible solution for this. I am not sure if I can open an support ticket for this issue.
Rohit Chowdhary

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with Spry Accordion Panels

Hi, I'm having some strange issues with the Spry Accordion
Panels.
Here is the page:
http://www.bellaclientcenter.com/browncollege/aboutus.html
For some reason when I preview this message it adds extra
characters to the url above, so just delete those off to see the
correct url.
The only browser this does NOT happen in is safari, I'm
seeing it all of my other browsers. You'll notice when you first
load up the page, you'll see that the active panel header
background is green, and the non active is a dark grey. But when
you click one of the other panels they all turn a strange neon blue
color. This is very apparent in firefox.
Any thoughts on this? I've attached the spry css code in case
the problem is there.
thanks so much!!
Jeff

That is because your page is currently invalid. And renders in IE quirksmode..
<base href="http://www.industrialwebsearch.com/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
So make sure your page is valid, and the animations will go smooth in ie

Strange Issue with Guided Nav and filters

Hi All,
I am have a very strange issue with the guided navigation.
I created an answer in BI and when I look at 'Display Results' in Answers everything shows up fine.
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= current_date-1) AND (LU_ACCOUNT.TERMMATDATE <= current_date+89)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
But when I link to this answer via guided navigation the filter seems to change??
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (LU_PRODUCT.MAJOR = 'CML') AND (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1) AND (LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Dashboard=/users/administrator/_portal
Dashboard Page=Loans Maturing
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
I am just it is going to the same report. Any ideas on why this is happening??
Thanks

Yes,
these are simply two different reports, as you can see from the filters...

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Issue with a graphical mapping -

Hi folks,
I have an issue with a graphical mapping.
We are replicating the Material Master, with an interface of ECC -> PI -> JDBC.
The idoc we are using is the MATMAS.MATMAS05, and in the database we created 5 tables, simulating the structure of the source idoc. The tables are: MARA, MARC, MARD, MBEW, MAKT.
The fact is that we need some data of some segments (tables) in another ones.
In this case we I need to take a value of the segment E1MARCM (MARC) to the MBEW table. The value is: SERNP.
The condition to copy that value is the centre (WERKS). So, the condition will be:
If MBEW-WERKS == MARC-WERKS,
then MBEW-SERNP = MARC-SERNP.
The problem I'm having is that I have to lookup in many different E1MARCM segments, and the relation is not 1...1, nor, E1MBEWM is a child of it (they are in the same level.)
For example there could come:
- E1MARCM_1 (WERKS = 0001)
- E1MARCM_2 (WERKS = 0002)
- E1MARCM_3 (WERKS = 0003)
- E1MBEWM_1 (WERKS = 0001)
- E1MBEWM_2 (WERKS = 0002)
- E1MBEWM_3 (WERKS = 0002)
- E1MBEWM_4 (WERKS = 0003)
- E1MBEWM_5 (WERKS = 0003)
Am I clear with the requirement?
Any answer will be greatly appreciated.
Thanks in advance.
.Juan.

Hey folks, any advice or input about this?
Thanks again.
Juan

Strange Issue with Display / Graphics (video attached)

Similar Messages

Maybe you are looking for