Strange Issue With Exporting JPgs

I am having a strange problem with exporting my vector files to jpgs. When I export the file as a .jpg then open it some of the text or shapes (like rectangles or squares) are gone. When I go back and open the .ai file the stuff is there, but it's just gone on the jpg. If I open the .ai file in Photoshop it is gone also. I have to save the file as a pdf then open the pdf in Photoshop and export as a .jpg from there. It is very strange. If I go into the Illustrator file and re-type the text that disapers, it usualy corrects the probelm. I am not an expert with Illustrator so I may be doing something wrong, if anyone can help please let me know, thanks!! (I have CS3)

I am using Windows XP with CS3, I do not see a box to uncheck it. I just
cleared the attributes and reapplied the fill color and that worked. But I
only see the overprint on the shapes but when the text is diapering I do
not see the overprint in the attributes panel nor on the shape that is behind
the text.
In a message dated 3/12/2010 11:49:57 A.M. Central Standard Time, foru
[email protected] writes:
Just uncheck the box in the Attributes panel.

Similar Messages

Issue with exporting JPGs

Camera: Nikon D7100 Using 14-bit RAW So somehow I've failed to notice that when I export after editing and using the resize option (to 2000x2000), the quality of the resulting JPEG is soft and lacking in detail/clarity that exists in the image in LR. Even when I export it without resizing, leaving it in the natively taken resolution, the clarity and sharpness is gone. I've tried using the sharpen for screen settings but it doesn't fix the basic issue of the softness/clarity. I thought it might be the JPG view I was using (the default photo viewer in windows 8), so I reimported it back into lightroom but it shows the same lack of clarity/sharpness. Attached is a sample of the issue. One is a screenshot of how it looks in LR, the other how it exports. 100% Quality, 72 resolution (have tried the default of 240 and it didn't change anything), sRGB color space. Am I doing something wrong with exporting?

It happens on both version 5.71 and on version 6 (CC). I'm having the issue that others have had where the develop and library module previews don't match and what is being exported is how the library module sees the edited photo. I understand that there are different preview algorithms for library/develop but that shouldn't matter when exporting.
This post has a pretty lengthy discussion about the issue but has no resolution:
Develop module & library module aren't matching

Color Issues with exported JPGs

Hello,
This is my 1st post on the forums and hopefully someone can help. I am using a Dell 2407 24 inch LCD for photo processing. I have calibrated my monitor with Heey Pro 1.5. The custom profle loads at windows startup (I see the colors snap to the correct settings). I use Lightroom 2.6 and am running a Vista 64 bit PC. Everything is running great. However I have noticed that my files coming out of Lightroom look much more saturated color wise.
I'm a Photographer and shoot all photos in Canon RAW. Both cameras are set to sRGB. I then import the files into LR. When I'm done processing them, I export the files to JPG, 100 quality, sRGB. When I view them in windows, or through an image viewer or the web, the colors look much more saturated. My friend is running almost the exact same setup and his files look identical in LR, windows and in a web browser. What could be happening here? So as a result I think the files look good in LR but then when they are exported, the look way too saturated. What could be causing this???
Here's an example oo what I'm seeing: http://lifesharephoto.smugmug.com/photos/871756198_22ecN-L.png
Can someone please help me figure this out? Thank you!

It's your monitor. It is a wide gamut one (it probably has HC in the full name?), which means it has a response closer to adobeRGB than to the standard sRGB. When you use non color managed apps (such as internet explorer) on such a monitor and use sRGB, the image will appear oversaturated. You need to only judge color in color managed apps on such a monitor. Some browsers are color managed such as Firefox and Safari. Unfortunately Firefox does not know how to deal with profiles generated from the Huey Pro, so it will not color manage when you use that calibrator. Safari will always color manage. Other apps that color manage are Photoshop, Windows picture viewer (for Vista and later), Irfanview (latest versions), etc. On the Mac almost every program color manages.

Issue with export in Excel in WAD

Hi
I have an issue with export to excel in WAD. I have a web template with two or more tabs.
On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
can anyone help / give a clue what to look for.
br,
John
Edited by: John Dolph on Apr 15, 2010 10:50 AM

Hi
Sorry I has been a while but the problem still occurs,
I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
<bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
            <bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
                <bi:BUTTON_LIST type="ORDEREDLIST" >
                    <bi:BUTTON type="COMPOSITE" index="2" >
                        <bi:CAPTION value="EXCEL" />
                        <bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
                        <bi:ACTION type="CHOICE" value="INSTRUCTION" >
                            <bi:INSTRUCTION >
                                <bi:EXPORT >
                                    <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                        <bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
                                        <bi:ITEM_REF index="2" value="TAB_A_CHART" />
                                        <bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
                                        <bi:ITEM_REF index="4" value="TAB_B_CHART" />
                                    </bi:ITEM_REF_LIST>
                                    <bi:EXPORT_FORMAT value="XLS" />
                                </bi:EXPORT>
                            </bi:INSTRUCTION>
                        </bi:ACTION>
                    </bi:BUTTON>

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with Spry Accordion Panels

Hi, I'm having some strange issues with the Spry Accordion
Panels.
Here is the page:
http://www.bellaclientcenter.com/browncollege/aboutus.html
For some reason when I preview this message it adds extra
characters to the url above, so just delete those off to see the
correct url.
The only browser this does NOT happen in is safari, I'm
seeing it all of my other browsers. You'll notice when you first
load up the page, you'll see that the active panel header
background is green, and the non active is a dark grey. But when
you click one of the other panels they all turn a strange neon blue
color. This is very apparent in firefox.
Any thoughts on this? I've attached the spry css code in case
the problem is there.
thanks so much!!
Jeff

That is because your page is currently invalid. And renders in IE quirksmode..
<base href="http://www.industrialwebsearch.com/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
So make sure your page is valid, and the animations will go smooth in ie

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Strange issue with Exchange system

Hello,
I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
Error:
The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
In the Exchange organization there are 2 CAS servers, 2 MBX servers.
Memento Mori

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

Strange issue with the render percentage indicator

Hello,
I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.mov

This is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
At this time, the solution is to turn off backup per library...
10.1.3 update "backup" mess

Strange issue with an n86

I'm encountering a very strange issue with an n86 lately.
Sometimes when I boot it up it goes through the boot process fine (nokia logo, hands + tune).
But ends up at a white screen.
Strangly I can shutdown the phone normally, and even access the menu.
It's like the only thing that doesn't load right is the standby screen.
The only thing I installed lately is PhoneTorch.
Restarting the phone a few times, makes it work right eventually.
Firmware: V21 (thats the latest available for me)

Could u uninstall the torch app to check if it is the cause of the issue? Lets try the easy one first! If a problem occure right after youve installed something on your device, or changed a setting, it's often wise to try to uninstall or undo what u have done to it. If this fails we have to look at other possible solutions.

Strange Issue With Exporting JPgs

Similar Messages

Maybe you are looking for