Strange issue with formatting after opening CSV - profile specific

I have an issue with Excel 2010 in my user profile when I open any CSV. The first twelve rows autodetect dates and allow me to manipulate the data as dates. All following rows do not. This is specific only to my user profile. It also
occurs if I rename the csv to .txt and import it. It does not allow me to format the data in those rows even after saving the .csv as an excel spreadsheet.
I created a new user and it works properly.
I have attempted to correct this by deleting the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel 14, by replacing the office
files in my roaming profile, and even by creating Sheet.xltx and book.xltx, all to no avail. I have a lot of data in this profile and prefer not to simply use a new profile.
Can someone please help me to correct this matter?

It figures - I solved my own problem moments after posting this. I reset all customizations in Region and Language Format settings and it resolved the matter.

Similar Messages

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Strange issue with Exchange system

Hello,
I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
Error:
The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
In the Exchange organization there are 2 CAS servers, 2 MBX servers.
Memento Mori

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Unsupported Image Format after opening a file in Photoshop.

As from today,I am getting an unsupported Image Format after opening a file in Photoshop. I have made nothing more than as crop on the image. Why?

Ernie, I misread your post indeed. I never saw a option to send RAW files to an external editor. All I can see is the option to chose what editor and then specify if PSD or TIFF is used. I always use PSD, usually 16bit and in one other installation in 8bit (due to RAM restrictions there).
So Aperture creates the PSD version and PS edits that very version and saves it back into aperture. This is where I sometimes () get that "unsupported image" problem.
I think this also is what Mike does: select a RAW master, use an external editor -> Aperture creates a PSD or TIFF. I haven't tried the TIFF option , though.
My main point was: it all worked for a very long time and with the latest updates it is broken.
have a good day.
Roland

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

Strange issue with an n86

I'm encountering a very strange issue with an n86 lately.
Sometimes when I boot it up it goes through the boot process fine (nokia logo, hands + tune).
But ends up at a white screen.
Strangly I can shutdown the phone normally, and even access the menu.
It's like the only thing that doesn't load right is the standby screen.
The only thing I installed lately is PhoneTorch.
Restarting the phone a few times, makes it work right eventually.
Firmware: V21 (thats the latest available for me)

Could u uninstall the torch app to check if it is the cause of the issue? Lets try the easy one first! If a problem occure right after youve installed something on your device, or changed a setting, it's often wise to try to uninstall or undo what u have done to it. If this fails we have to look at other possible solutions.

Strange issue with left mouse clicking freezing other inputs on the Mac

I'm having a strange issue with my game. I'm using Flash CS6 and a Mac.
I've got a character that I move around the screen with keys, and you can click the left mouse button to make him throw something. The weird issue is when I click the left mouse button a lot, it seems to stop any other inputs from coming in, so for example, if I hold the right arrow key down while I'm doing a left clicking, and then let go of the right arrow key, the character will keep on moving right for a few seconds, until it finally get's the key_up event and stops.
Even not using any mouse event handlers, so the mouse is doing nothing in the game still causes the key inputs to be delayed just by left clicking, any ideas?
I've just tested the .swf on a PC and there was no problem, the mouse clicking was not causing any issues, so it's something peculiar to the Mac.

Hi,
This could be an issue if you were using Safari 5.1+ in 64bit mode. This should go away if you run Safari 5.1+ in 32 bit mode. You can change this by
1. Go to /Applications
2. Find Safari->RightClick->Get Info->Check 'Open in 32-bit mode' check box.
3. Relaunch Safari 5.1 again.
Thanks!
Mohan

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with formatting after opening CSV - profile specific

Similar Messages

Maybe you are looking for